241860801 Frigidaire Refrigerator Ice Container Assembly is a replacement ice bin assembly designed to collect and store ice produced by a refrigerator’s icemaker. As a molded component used in compatible Frigidaire freezer compartments, the assembly typically provides the physical ice storage cavity, mounting points for attachment to the freezer liner, and interfaces for any dispenser or auger drive used in models with through-the-door dispensing.
Within the appliance, the ice container assembly acts as the interface between the icemaker and the user-facing dispenser and therefore interacts with several subsystems: the icemaker module that releases ice, any auger or motorized drive that moves ice to the dispenser chute, level-detection devices (mechanical arms or optical sensors), door switches and seals, and the surrounding thermal environment that affects ice consolidation. Proper fit and alignment of the container affect ice flow, dispenser operation and the accuracy of level detection; damage, misalignment or improper sealing can cause jamming, bridging of ice, sensor errors or increased melting and clumping.
In this article readers will learn how the 241860801 assembly functions and where it is typically used, how to verify compatibility with specific Frigidaire models, common failure symptoms to watch for (visible cracks, ice jams, dispenser failures, sensor faults), step-by-step troubleshooting approaches (visual inspection, cleaning, checking auger/motor operation and level sensors, and verifying freezer temperature and water supply), and practical replacement considerations such as part-number verification, proper installation orientation, connector and fastener checks, and testing procedures after replacement.
Table of Contents
- function and Role of the Ice Container Assembly in Ice Production and Dispensing
- How the 241860801 Frigidaire Refrigerator Ice Container Assembly Operates and Interfaces with Internal systems
- Common Failure Symptoms and Diagnostic Indicators for the Ice Container Assembly
- Compatibility, Replacement Considerations, Installation Procedure and Troubleshooting for the Ice Container Assembly
- Q&A
- Key Takeaways
Function and Role of the Ice Container Assembly in Ice Production and Dispensing
The 241860801 Frigidaire refrigerator Ice Container Assembly serves as the intermediate storage and mechanical interface between the freezer ice maker and the door ice dispenser.Technically, it provides a controlled bin volume to accumulate cubes or nuggets, aligns ice with the dispenser chute or auger, and houses the mechanical or optical level-detection features used to stop the ice maker when full.The polymer construction and molded mounting points ensure repeatable seating and alignment with the dispenser drive and the ice maker’s discharge chute; any deformation or incorrect seating can cause bridging, jams, or false full/empty signals that interrupt normal operation.
In practice, the container’s condition and compatibility determine dispensing reliability more than the ice maker itself. Common behaviors that point to container-related issues include inconsistent dispense quantities, ice sticking together inside the bin, and dispenser motor stalling when the chute is misaligned. Technicians should verify that the container’s sensor cutouts, tabs, and electrical or mechanical interfaces match the refrigerator model and that the bin is free of cracks and excessive frost. Replacing the container typically resolves problems caused by worn mounting features or damaged walls, while routine cleaning and correct seating prevent conductive and optical sensor errors.
- Features: molded mounting tabs,sensor interface area,chute/alignment lip,and smooth internal surfaces to reduce adhesion.
| Item | Description |
|---|---|
| Function | Stores produced ice and delivers it to dispenser mechanism while interfacing with level sensors. |
| Typical failure modes | Cracks,worn mounting tabs,misalignment causing jams,sensor obstruction by frost or debris. |
| Compatibility notes | Designed for specific Frigidaire assemblies; verify tab locations and sensor cutouts before replacement. |
How the 241860801 Frigidaire Refrigerator Ice Container Assembly Operates and Interfaces with Internal Systems
241860801 Frigidaire Refrigerator Ice Container Assembly serves as the receiving and dispensing chamber for ice produced by the icemaker. The component is a molded bin that locates ice for gravity feed to a rotating auger or chute, provides the splined drive coupling interface where the dispenser motor transmits torque, and incorporates the ice-level actuating element (mechanical arm or optical switch location) that signals the icemaker to stop production. In normal operation the assembly must maintain correct geometry and alignment so the auger clears ice without binding and the level sensor reliably detects a full bin; any deformation, cracked walls, or damaged splines will compromise dispensing and control signals to the refrigerator’s icemaking system.
The assembly interfaces mechanically and mechanically-electrically with the refrigerator: it mounts to shelf and cabinet bosses, engages the dispenser drive through a rear opening, and presents the actuator or sensor surface to the icemaker control. For service and troubleshooting, inspect seating and mounting, check the drive coupler and splines for wear or stripped teeth, verify free rotation of the auger, and confirm sensor actuation travel and continuity. Practical examples: if the dispenser motor runs but no ice advances, the bin/drive interface is a likely failure; if the icemaker continues producing ice despite a visibly full bin, test the level actuator or optical sensor for proper operation and replace the bin if its mounting or actuator surfaces are damaged.
- Drive interface: splined coupler area for dispenser motor engagement
- Level control: mechanical bail-arm or optical sensor interface point
- Mounting: snap ribs and screw bosses for cabinet alignment
- Service indicators: cracked bin, stripped splines, auger seizure, sensor failure
| Item | Description |
|---|---|
| Primary function | Store and position ice; transfer torque from dispenser motor to auger |
| Interfaces | drive coupler, ice-level actuator/sensor, cabinet mounting points |
| Common failure modes | Cracked bin, worn/stripped splines, jammed auger, sensor misalignment |
Common Failure Symptoms and Diagnostic Indicators for the Ice Container Assembly
241860801 Frigidaire Refrigerator Ice Container Assembly is the removable ice receptacle that receives ice from the ice maker and provides the mechanical interface to the dispenser/auger and door assembly. Its functional roles are to store ice without excessive bridging, position the ice for consistent auger engagement, and present the correct surface or sensor target for any low-ice detection. The part’s molded features-mounting tabs, locating ribs, and the internal chute geometry-determine compatibility with specific Frigidaire model families; an incorrect or worn container changes clearances and can cause binding, misalignment of the auger, or false sensor readings.Thermoplastic construction resists cold but can become brittle with age or repeated impact, and frost accumulation inside the bin alters flow characteristics and reduces usable capacity.
Diagnosing failures requires both visual inspection and simple mechanical checks.Remove the container and inspect mounting tabs and latch interfaces for cracks or elongation, verify the auger rotates freely when the bin is seated and unseated, and look for signs of refrozen clusters or excessive frost that indicate humidity or defrost issues upstream.Practical checks include manually rotating the auger to feel for intermittent resistance (a single hard stop often signals a cracked divider or trapped ice), measuring lateral play between the ice bin and auger shaft (excessive play typically >3 mm suggests wear or incorrect part), and confirming that any reflective or mechanical sensor sees the container surface when empty. These targeted observations help distinguish container issues from ice maker, freezer temperature, or dispenser motor failures.
- Ice bridging or clumping inside the bin causing jams during dispensing.
- Unusual grinding or stalling noises from the auger when dispensing.
- Visible cracks, broken mounting tabs, or warped edges preventing proper seating.
- Intermittent or false low-ice sensor indications when container position is inconsistent.
- Excessive frost buildup indicating moisture ingress rather than strictly mechanical failure.
| Item | Description |
|---|---|
| compatibility | Fits designated Frigidaire model families-confirm model/serial compatibility before replacement. |
| Mechanical checks | Inspect tabs, latch fit, and axial/lateral clearance; >3 mm lateral play is a common threshold for service consideration. |
| Typical failure modes | Cracks at mounting points, warped or torn edges, ice bridging from frost or refreeze. |
| Practical test | Seat empty bin and manually rotate auger; listen for grinding and observe consistent engagement. |
Compatibility, Replacement Considerations, Installation Procedure and Troubleshooting for the Ice Container Assembly
241860801 Frigidaire Refrigerator Ice Container Assembly is the receptacle that stores ice produced by the icemaker and provides the mechanical interface to the dispenser and door switch assemblies. The part functions as a passive storage bin and a guided pathway for ice to be delivered to the auger or chute; proper function depends on correct alignment of mounting tabs, actuator arms, and the bin switch that signals the icemaker and dispenser motor. Compatibility considerations include bay dimensions, tab locations, sensor/switch types (mechanical plunger vs. magnetic reed), and whether the refrigerator model uses a separate auger motor or integrated dispenser drive. When selecting a replacement, compare the OEM number, mounting geometry, and connector style rather than relying solely on model family names; small differences in flange positions or sensor housings can cause dispensing jams or failure to register a full/empty condition.
Installation requires removing the old bin, inspecting mating surfaces and the bin switch actuator, and seating the new assembly until the retaining tabs click into place. After installation, verify that the door/dispenser switch closes and the auger rotates freely through a full cycle; if dispensing issues persist, check freezer temperature, ice granularity (sintering or fused cubes), and for obstructions near the auger inlet. Common troubleshooting steps include verifying continuity of the bin switch, manually actuating the switch to confirm dispenser response, and confirming the ice maker shutoff arm or sensor is in the correct position. For example, if cubes are jamming, warm freezer conditions or a cracked bin lip can alter cube flow and require replacing the bin or correcting freezer temperature setpoints.
- Symptom: No dispense – check bin switch continuity and dispenser motor drive engagement.
- symptom: Frequent jams – inspect inlet lip,clear fused ice,verify auger rotation without binding.
- Symptom: Ice maker won’t shut off – confirm sensor/arm position and mechanical compatibility with replacement bin.
| Item | Description |
|---|---|
| Part number | 241860801 (OEM ice container for select Frigidaire models) |
| Function | Ice storage bin and dispenser interface (mechanical mounting + switch actuation) |
| Compatibility notes | Match mounting tab spacing, switch actuator type, and bay depth; not global across all model years |
Q&A
What is the 241860801 Frigidaire Refrigerator Ice Container Assembly and what does it do?
The 241860801 ice container assembly is the OEM ice storage and dispenser bin used in many Frigidaire family refrigerators.It holds ice produced by the ice maker and guides it to the dispenser/auger. Depending on the exact refrigerator model, the assembly may include the bin, chute, auger coupling and mounting features required for the dispenser to operate.
How do I know if 241860801 is the correct replacement part for my refrigerator?
Check the part number on the old ice bin (if accessible) or the appliance model number (usually on a sticker inside the fresh-food compartment or on the cabinet wall). Use the refrigerator model number to search OEM parts catalogs or Frigidaire’s parts site and confirm that 241860801 is listed for your model. If unsure, provide the appliance model number to an authorized parts dealer or Frigidaire customer support for verification.
What are common symptoms that the ice container assembly needs replacement?
Common signs include: visible cracks or damage to the bin causing leaks, an auger that won’t engage or spins free, ice jamming or bridging inside the bin, the dispenser door/chute being misaligned or broken, or persistent dispenser noise that traces back to the bin/auger area.if the bin is distorted or the auger coupling is damaged, replacement is usually required.
Can I install the 241860801 myself,and what tools/safety steps are required?
Yes,a competent DIYer or technician can typically install this part. Basic tools: screwdriver or nut driver set (Philips and flat, possibly Torx depending on model), and a pair of gloves. Safety steps: disconnect power to the refrigerator (unplug or switch off breaker) and, if the dispenser uses water lines in the bin area, turn off the water supply before starting. Remove any ice from the bin, remove mounting screws or clips holding the old assembly, transfer or align any auger couplings, seat the new bin and secure fasteners, then restore power/water and test the dispenser/ice maker.
How should I clean and maintain the 241860801 ice container assembly?
Regular maintenance: empty the ice bin periodically, discard old or odorous ice, and wash the removable bin components with warm water and mild dish soap. Rinse thoroughly and dry before returning to the freezer. Do not use harsh chemicals or abrasive pads. Avoid submerging any motors or sensors; wipe those parts with a damp cloth. Keep freezer temperature at recommended settings to prevent ice bridging or excessive frost.
What troubleshooting steps should I take if ice stops dispensing after installing the new bin?
Verify power and water are restored.Check that the auger (if present) is properly engaged to its motor coupling and not obstructed by ice. Inspect the dispenser actuator/switch and door for proper alignment. Listen for the auger motor when the dispenser is activated-if it runs but no ice moves, the auger coupling may be stripped. if the auger does not run, check the dispenser control, motor, wiring, and door switch. Also confirm the ice maker is producing ice and the freezer temperature is cold enough (typically 0-5°F / -18 to -15°C).
Is 241860801 an OEM part and are aftermarket replacements acceptable?
241860801 is an OEM Frigidaire part number. OEM parts typically match original fit, finish and materials. Aftermarket replacements are available and may be less expensive, but quality and fit can vary. If you want guaranteed compatibility and any applicable manufacturer warranty, choose the OEM part or a reputable parts supplier that guarantees fit for your model.
Key Takeaways
The 241860801 frigidaire Refrigerator Ice Container Assembly plays a central role in the appliance’s ability to produce, store and dispense ice reliably and hygienically. As an integrated component designed to fit specific Frigidaire models, it helps maintain proper ice formation, prevents cross-contamination, and supports consistent dispensing performance-factors that contribute to overall refrigerator function and user satisfaction.
Timely and accurate diagnosis of ice-related issues is vital because symptoms such as poor ice production, jamming, leaking, or unusual odors can stem from the container assembly, surrounding components, or system-level faults. Proper inspection-confirming fit, seals, alignment, and compatibility-helps determine whether repair or replacement of the 241860801 assembly is warranted, avoiding unneeded expense and ensuring the correct corrective action is taken.
When replacement is necessary, using the correct part and following manufacturer recommendations preserves performance, warranty considerations, and long-term reliability. Combined with routine cleaning and preventive checks, appropriate diagnosis and replacement of the 241860801 Frigidaire Refrigerator Ice Container Assembly support safe operation and sustained appliance efficiency.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok