318414213 Frigidaire Oven Range Electronic Clock Timer is an electronic control module used in many Frigidaire electric ranges and ovens; it combines a digital clock, user interface, and timing/control circuitry that coordinates timed functions and user commands. As a component it typically consists of a display and keypad assembly coupled with a printed circuit board that contains the timekeeping oscillator, microcontroller, and driver circuits used to generate control signals and alarms.
Inside the appliance the clock timer serves both as the visible interface for the operator and as a control point for timed operations. It provides real-time clock functions, delay-start and cook-timer sequences, audible alarms, and may send enable/disable or sequencing signals to the oven’s main power relays, triacs or control board. The timer interacts with the user interface,the main control or power board,door latch and light circuits,and the oven temperature sensing circuit (thermistor/RTD) indirectly by coordinating when heating elements or convection fans are energized during timed cycles.
In this article readers will find a technical overview of the 318414213 module’s function and typical wiring/connector assignments,guidance on model compatibility and identifying equivalent parts,common failure symptoms to look for (for example blank or garbled display,clock not keeping time,timers not starting or stopping heating cycles,intermittent operation,or stuck keypad),methods for basic troubleshooting and safe diagnostic checks,and practical considerations for replacement such as verifying part numbers,connector pinouts,mounting,ESD precautions and when to enlist qualified service. The emphasis is on factual, service-oriented details to help technicians, engineers and appliance owners diagnose and replace the module correctly.
Table of Contents
- Function and Role of the Electronic Clock Timer in Frigidaire Oven Ranges
- How the 318414213 Frigidaire Oven Range Electronic Clock timer Works inside the Appliance
- Common Failure Symptoms and Diagnostic indicators for the Electronic Clock Timer
- Replacement Considerations and Installation Procedures for the Electronic Clock Timer
- Q&A
- To Wrap It Up
Function and Role of the Electronic Clock Timer in frigidaire Oven Ranges
The 318414213 Frigidaire Oven Range Electronic Clock Timer functions as the timing and user-interface module that coordinates the oven clock, timed cooking cycles, and timed control signals sent to the range’s power and control systems. The module contains a real‑time clock oscillator and a microcontroller that receives keypad input, maintains time in non‑volatile memory, and outputs discrete control signals to initiate or terminate bake/broil cycles, control the oven light, and provide minute‑timer functions. Depending on the range design the timer either switches line voltage directly through internal switching devices or provides low‑voltage logic signals to the main control board; technicians must confirm how the specific model routes control before diagnosing or replacing the part.
Operational behavior and compatibility are practical considerations when servicing this part: common failure modes include a blank or frozen display, incorrect timekeeping, failure of delayed start or auto‑shutoff functions, and failure to actuate heating circuits when a timed cook is commanded. Troubleshooting typically verifies incoming supply, harness continuity, and the presence of expected control outputs when the timer initiates a function; replacing the module requires matching the part number and harness connector to the appliance model to ensure pinout and mounting compatibility. Examples of practical checks and functions are listed below for reference.
- Key functions: real‑time clock,delayed start,timed shutoff,minute timer,display and keypad interface.
- Common symptoms: no display, incorrect time, timed cycle not starting/stopping, oven not responding to timer commands.
- Basic checks: confirm line‑voltage supply to the module, inspect harness/connectors, measure control outputs during a commanded cycle, and compare part number/harness to the range model before replacement.
| Item | Description |
|---|---|
| Input supply | Typically the module is powered from the range’s main supply (in U.S. ranges this is normally 120 VAC for the clock/timer electronics). |
| Control outputs | Produces discrete switching signals to the main control or element relays; might potentially be line‑voltage switching or low‑voltage logic depending on design. |
| Interface | Keypad and display for user input; multi‑pin harness to the main control-verify pinout against the appliance wiring diagram. |
How the 318414213 Frigidaire Oven Range Electronic Clock Timer Works Inside the Appliance
The 318414213 Frigidaire Oven Range Electronic Clock Timer is the user-interface and timing controller that coordinates clock display, countdown/timed bake functions, and the control signals that energize the oven’s heating circuits. Internally it contains a small microcontroller with a real-time clock, a front-panel keypad and LED/LCD driver, and output drivers that command relays or triacs on the main power board. in a timed-bake sequence the module holds the element circuits open until the programmed start time, than asserts a control output which the range’s power board translates into mains power to the bake element; the module does not directly switch high current but provides the control logic and low-voltage commands that the range’s main relays or solid-state switches act upon.Compatibility depends on connector pinout and control protocol-this part is a drop-in for specific Frigidaire models but must match the harness, mounting and relay interface on the oven control assembly.
- Clock/RTC and user display for timekeeping and timed cooking modes
- Keypad scanning and debounce logic for reliable user input
- Control outputs that signal the main power/relay board (low-voltage logic or driver outputs)
- diagnostic behaviors: error codes on display, non-responsive keys, or failure to initiate timed cycles
- Physical/electrical compatibility: connector pinout, mounting tabs, and ground reference
For troubleshooting and installation, verify the display and keypad first, then confirm the module’s supply voltage and the presence of expected control signals at the connector while commanding a cycle. Common field checks include measuring the module’s supply (typically a low-voltage DC supply derived from the range’s power supply), observing the control output transition when a timed function is activated, and inspecting connector terminals for corrosion or bent pins. Typical failure modes are a blank or garbled display, unresponsive keys, or correct timekeeping with no activation of the oven-these indicate faults in the module’s electronics, connector, or the downstream relay/triac stage. When replacing the unit, ensure the replacement 318414213 module matches the oven’s harness and control board interface; if the oven still fails to heat after swapping, test the main relay/triac and oven temperature sensor before assuming the new timer is defective.
Common Failure Symptoms and Diagnostic Indicators for the Electronic Clock Timer
The 318414213 Frigidaire Oven Range Electronic Clock Timer is the user-facing timing and clock module that provides timekeeping, delayed-start and timed-bake functions while issuing logic signals to the oven’s power-control circuitry. In typical operation the module maintains a real-time clock, interprets keypad commands, updates the display, and closes/open control outputs that allow the main control board or relay assemblies to energize heating elements. Compatibility depends on matching the connector pinout, mounting footprint, and control protocol; installing a replacement with an incorrect harness or pinout can result in a blank display, nonfunctional timer features, or improper control of bake/clean cycles.
Technicians diagnosing failures should correlate observed symptoms with distinct failure modes and verify both the low-voltage logic supply to the module and the line-voltage paths it controls. Common indicators that point to the electronic clock timer include:
- Blank or flickering display-suggests loss of VCC to the display module, wiring/connector fault, or internal display failure.
- Unresponsive keys or intermittent button operation-may indicate membrane/keypad failure or poor connector contact.
- Timed functions do not start or stop the oven-often caused by failed output switching, internal relay/driver fault, or mismatched replacement part.
- Erratic timekeeping or displayed error codes-can result from failed clock circuitry, marginal solder joints, or power supply irregularities.
| Item | Description |
|---|---|
| Visual and connector check | Inspect harness pins for corrosion, bent pins, and secure seating; many faults are caused by poor mating rather than the module itself. |
| Power and output verification | Confirm presence of the expected low-voltage logic supply at the module connector and continuity of control outputs to the relay or element circuits before replacing the timer. |
Replacement Considerations and Installation Procedures for the Electronic Clock Timer
the 318414213 Frigidaire Oven Range Electronic Clock Timer controls the user interface clock, countdown/timer functions, and the logic signals that enable timed bake and broil cycles. Internally this module contains a low-voltage display/logic section and one or more relay/transistor outputs that switch line voltage to the oven controls; failures commonly manifest as a blank or flickering display, unresponsive keypad, or a timer that does not start or stop heating cycles even though the bake element receives power. Verify compatibility by matching the OEM part number, connector pinout, and mounting geometry to the service manual for the specific frigidaire range model; mismatched pin assignments or different relay ratings can cause incorrect behavior or damage other control circuits.
Replace the module only after isolating the symptom to the timer assembly using basic electrical checks (display supply, keypad continuity, and relay coil resistance) and confirming that temperature sensor, door switches, and main power fuses are functional. During installation, disconnect household power, document connector positions or photograph the wiring harness, remove the control panel fasteners, swap the unit and secure it with original hardware, then restore power and run functional tests: set the clock, start a timed bake, and observe relay operation and oven temperature response. If error codes appear, consult the service sheet for diagnostics and verify that any related wiring or grounding issues are corrected before returning the range to service.
- Power off and verify isolation at the breaker before touching wiring.
- Document harness orientation; match connector shapes and pin counts to the new module.
- Test display supply, relay coil continuity, and any inline fuses before replacing.
- After installation, verify clock accuracy, timer functions, and a full bake/broil cycle.
| Item | Description |
|---|---|
| Control voltage | Typically 120 VAC for relays; logic/display powered by low-voltage supply derived from board. |
| connector | Multiplug harness; pinout must match service manual for the specific Frigidaire model. |
| Mounting | Panel-mounted with metric/standard fasteners; retain original hardware for proper grounding. |
Q&A
What is part 318414213 and how do I confirm it will fit my Frigidaire range?
Part 318414213 is an OEM replacement electronic clock/timer/control assembly used on some Frigidaire ranges. To confirm compatibility, check the model number on the range (usually on the oven frame or behind the kickplate) and compare it with the parts list in the owner’s manual or the Frigidaire parts website. If you are unsure, provide your full range model number to the parts supplier or Frigidaire support – they will cross‑reference the correct clock/timer assembly for your specific model.
How do I safely replace the 318414213 clock/timer?
Always disconnect power at the circuit breaker before doing any work. Remove the control panel trim or back panel per your range’s service instructions,take a clear photo of the wiring or label connectors,then disconnect the harness and any ribbon cable. Unscrew and remove the old module and install the new one in the reverse order. Reconnect wiring exactly as it was, restore power, and verify operation.If you are not agreeable working with mains electricity or removing control panels, hire a qualified appliance technician.
The display is blank but the oven elements and lights still work - is the clock/timer defective?
A blank display can mean a failed clock/timer module, a blown fuse in the control, a loose ribbon/harness connector, or loss of the 120VAC control supply. First, verify power is present at the control connector (most Frigidaire controls use 120 VAC for the electronics) with the breaker on. Inspect connectors for looseness or burn marks. If power is present and connectors are good, the module is highly likely defective and should be replaced.
The clock keeps resetting after power outages – is that normal and how do I fix it?
Most oven clocks do not have a long‑term battery backup and will reset when power is interrupted; a single brief outage will reset the clock. If the clock resets frequently with no visible power interruptions,it could indicate intermittent incoming power,a failing control board,or a loose connection. Check for loose wiring at the terminal block and ensure household power is stable. If power is stable and the problem continues, replace the clock/timer assembly or have a technician inspect the range control.
My oven won’t start and the control shows a locked or unresponsive state – can the clock/timer cause that and how do I unlock it?
Yes – the control/clock module handles keypad input and safety interlocks (such as door lock during self‑clean). To clear a lock or unresponsive state, first press Cancel/Off and wait a few minutes. If that fails, turn the breaker off for 30-60 seconds and then back on to reset the control. If the door is physically locked after a self‑clean cycle, allow the oven to cool or consult the service manual for manual unlock steps. Persistent lock/unresponsive behavior can indicate a faulty control board or keypad and may require replacement.
How do I diagnose error codes or faults related to the 318414213 control?
Refer to the range’s service manual for specific error code meanings. Commonly, codes can indicate issues with the temperature sensor (RTD/thermistor), keypad, oven relay, or control electronics. Basic checks include: verifying incoming voltage to the control, testing the oven temperature sensor resistance at room temperature (typically about 1100-1100 ohms at 70°F for many Frigidaire models – verify value for your model), inspecting connectors and wiring for damage, and checking for burnt components on the control. Use a multimeter and the schematic for guided tests. If diagnostics point to the control board itself, replacement is usually required.
How do I program the timer, set the clock, or use delayed start on this control?
Programming varies slightly by model, but typical steps are: set the clock first (press Clock, enter time, press Clock or Start), use the Timer/Minute timer button for kitchen timing, and for delayed cooking use Cook Time and Delay Start functions (enter desired cook time and delay start time, then press Start). If the control buttons are unresponsive, check the keypad ribbon connection.Always consult the owner’s manual for exact button sequences for your model.
Where should I buy part 318414213 and will I need any calibration after replacing it?
Buy OEM parts from Frigidaire, authorized parts dealers, or reputable online appliance parts stores. Ensure the seller accepts returns in case of wrong part. After replacement, the clock/timer usually does not require calibration, but you should set the clock and run a test bake to confirm elements and temperature sensing work correctly. If you replace the control and notice temperature variance, perform the oven temperature calibration procedure from the owner’s manual (if available) or have a technician verify the sensor and calibration.
To Wrap It Up
The 318414213 Frigidaire Oven Range Electronic Clock Timer serves as the user interface and timing control for the oven, coordinating clock displays, timed cooking cycles, delay-start and self-clean functions. its accurate operation is vital for consistent cooking results, reliable scheduling of oven functions and maintaining expected safety interlocks; when functioning correctly, the timer contributes to the overall performance and convenience of the range.
As timer symptoms can overlap with other electrical or control issues, proper diagnosis is essential before proceeding with repairs. Confirming that the 318414213 module is the root cause-rather than wiring, sensors or the main control board-helps avoid unneeded replacements. When replacement is required, selecting the correct part and following safe installation practices (or engaging a qualified service technician) ensures the component performs as intended and reduces the risk of further faults.
recognizing the role of the 318414213 Frigidaire Oven Range Electronic Clock Timer and taking a measured approach to diagnosis and replacement helps maintain oven accuracy, safety and longevity, while minimizing downtime and repair costs.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok