241734001 Frigidaire Refrigerator Ice Bucket is a service replacement ice storage bin designed for use in compatible Frigidaire freezer compartments. It is a molded plastic receptacle that collects and stores ice produced by the refrigerator’s automatic ice maker, providing the physical containment and interface necesary for harvested ice to be retained and dispensed or accessed manually.
Within the appliance,the ice bucket sits beneath the ice maker assembly and interacts mechanically with the ice maker’s ejector and harvest cycle; it also interfaces with any door-mounted dispenser or auger mechanism when present. Although the bucket is a passive component with no electrical elements on its own,its geometry,mounting features,and any built-in guides or sensor actuators affect ice flow,dispenser alignment,and level-sensing devices. Proper fit and orientation are therefore significant to prevent ice jams, ensure consistent dispensing, and avoid interference with the ice maker’s mechanical cycle.
In this article readers will find a technical overview of the ice bucket’s function and design,guidance on model compatibility and fitment considerations,typical failure symptoms (such as cracks,warped mounting tabs,ice clumping,and dispenser misalignment),and practical troubleshooting steps. The piece will also cover replacement considerations including inspection points, installation tips, and factors to check when choosing a replacement-facts intended to help technicians, engineers, and appliance owners make informed repair and maintenance decisions.
Table of Contents
- Function and Role of the Refrigerator Ice bucket Assembly in Ice Production and Dispensing
- How the 241734001 frigidaire Refrigerator Ice Bucket Works Inside the Appliance: Mechanisms, Mounting, and Interactions
- Common Failure Symptoms and Diagnostic Indicators for the Ice Bucket Assembly
- Replacement Considerations, model Compatibility, and Installation Procedures for the 241734001 frigidaire Refrigerator Ice Bucket
- Q&A
- Closing Remarks
Function and Role of the Refrigerator Ice Bucket Assembly in Ice Production and Dispensing
The 241734001 Frigidaire Refrigerator Ice Bucket serves as the primary collection and dispensing interface between the icemaker harvest cycle and the user-accessible dispenser. Functionally, the bucket collects cubes ejected from the evaporator mold, guides them toward the auger or paddle mechanism, and aligns with optical or mechanical “full” sensors that control the icemaker’s on/off sequencing. In properly functioning systems the bucket’s geometry and mounting tabs ensure correct engagement with the auger drive and the dispenser chute; misalignment, ice bridging, or damaged retaining fins will interrupt feed, cause motor stall, or trigger false full/empty signals. The bucket also contributes to thermal and airflow characteristics inside the storage cavity – its material and wall thickness affect how quickly ice warms and refreezes, which can influence clumping and dispensing reliability.
Technicians should view the ice bucket as an electromechanical interface rather than a passive container: its condition directly affects motor load, sensor readings, and the effectiveness of the harvest/dispense cycle. Typical service tasks include checking for cracked ribs or deformed mounts, verifying sensor alignment and continuity, and clearing compacted ice in the feed throat; replacing the bucket can resolve persistent jamming when motor torque and sensor operation test within specification. Practical examples include reinstalling the bucket to eliminate a lateral offset that causes the auger to rub, or replacing worn retaining clips that permit excessive vibration and noisy dispense cycles.
- Common symptoms addressed: no ice dispense,auger motor stalling,intermittent “cup full” sensor activation,and ice bridging/clumping.
- Key functional features: molded feed throat, sensor mounting bosses, mating tabs for auger/drive alignment, and drain channels for meltwater.
| Item | Description |
|---|---|
| Material | Rigid food-grade plastic with thermal stability to minimize deformation under low temperatures |
| Interfaces | Mounting tabs, auger housing alignment, sensor bosses; must match refrigerator model harness/geometry |
How the 241734001 Frigidaire Refrigerator Ice Bucket Works Inside the Appliance: Mechanisms, Mounting, and Interactions
The 241734001 Frigidaire Refrigerator Ice Bucket serves as the ice collection and staging component beneath the ice maker assembly; it captures ejected ice and either delivers it to a manual-access cavity or to a dispenser auger depending on the model. Internally the bucket is molded from a rigid food-grade thermoplastic and is shaped to align with the ice maker ejector path and the dispenser coupling. Proper function depends on precise seating: the bucket must engage its guide rails and mounting tabs so that the auger shaft (or ejector paddles) couples cleanly into the bucket’s drive interface. When correctly installed, the ice bucket isolates ice from direct contact with the mechanical drive and provides a controlled feed to the dispenser, while also allowing meltwater to channel away through designed drain paths to prevent refreezing and bridging.
- Mounting features: guide rails, retention tabs, and a keyed auger hub or ejector interface.
- Behavioral interactions: must free-spin at the auger hub, allow ejector clearance, and remain seated to avoid sensor misreads.
- Common symptoms of malfunction: grinding/noise at dispense,continuous ice-maker cycling,or ice bridging inside the bucket.
Technicians should inspect physical interfaces when diagnosing dispenser or harvest issues: verify that the bucket’s drive hub is not stripped, that mounting tabs are intact, and that no compacted or glazed ice obstructs the auger path. Compatibility checks include confirming the bucket’s tab spacing and hub geometry match the cabinet rails and auger shaft of the appliance model; mismatched buckets can permit partial engagement that produces abrasion, stripped teeth on the drive hub, or intermittent sensor activation. Practical repairs often involve reseating the bucket, clearing compacted ice with controlled defrosting, and replacing the bucket if tabs or the drive hub are cracked or deformed, which restores alignment and the intended mechanical interaction with the ice maker and dispenser.
| Item | Description |
|---|---|
| Mounting | Guide rails and retention tabs that position the bucket for proper drive coupling. |
| Interface | Keyed auger hub or ejector clearance area that mates with the ice maker/dispenser drive. |
| Failure modes | Stripped hub, broken tabs, glazed ice bridging, and misalignment causing noise or non-dispense. |
Common Failure Symptoms and Diagnostic Indicators for the Ice Bucket Assembly
The 241734001 Frigidaire Refrigerator Ice Bucket functions as the mechanical and containment interface between the ice maker and the dispenser or storage cavity: it locates the ice relative to the auger or door dispenser, provides the surface for the ice-level switch or arm to contact, and forms a partial water/melt seal at the chute. Mechanical fit and dimensional accuracy matter for reliable operation-worn mounting tabs, a warped bucket lip, or misaligned guide rails will produce misfeeds, poor engagement with the auger drive, or leakage even when the ice-maker module is functioning correctly. Material wear points to inspect include the bucket rim, drive engagement notch, and any mounting bosses that secure the bucket in the cabinet.
typical diagnostic indicators are observable without full disassembly: repeated dispenser motor motion without ice output, audible grinding or binding during dispense, water pooling at the bucket flange, and false-full indications from the ice-level switch or arm. A systematic diagnostic approach combines visual inspection, manual rotation of the bucket/auger engagement, and simple environmental checks (freezer temperature and cube morphology) to isolate mechanical from ice-production issues-for example, fused cubes from overfreezing will mimic a jam caused by a torn bucket rim. Use the checks below to prioritize replacement or repair actions.
- Ice jamming: Grinding sounds or no output when the dispenser runs; check for fused cubes and obstructions at the auger interface.
- Intermittent dispensing: Bucket slips or does not fully engage the drive notch; inspect mounting tabs and drive notch for wear.
- Meltwater leakage: Water pooling at the door or under the bucket flange; verify bucket lip seal and correct seating in the cavity.
- False-full signals: Ice-level arm stuck or misaligned; confirm free travel and that ice does not bridge the arm.
| Item | Description |
|---|---|
| Observable symptom | What to inspect first (mechanical points,sensor,surroundings) |
| Ice jam / grinding | Check for oversized/fused cubes,cracked bucket rim,foreign object at auger engagement; rotate auger manually to feel binding. |
| Leak at bucket flange | Inspect bucket seating, warped lip, and seal mating surfaces; confirm proper orientation in cabinet and that drain paths are clear. |
| Dispenser motor runs, no ice | Verify drive notch engagement and mounting tab integrity; confirm ice maker continues to form cubes and that cubes reach the bucket. |
Replacement considerations, Model Compatibility, and Installation Procedures for the 241734001 Frigidaire Refrigerator Ice Bucket
The 241734001 Frigidaire Refrigerator Ice Bucket is a molded collection and feed component that receives ice from the ice maker and presents it to the auger or dispenser mechanism. It is typically a rigid thermoplastic container with molded tabs and a specific auger-coupling interface; these features determine how it locates in the freezer cavity and transfers torque from the drive motor. Mechanical wear that affects the bucket’s tabs, the auger coupling boss, or the ice-chute sealing surface can cause feed failures, chattering during dispense, or ice bridging. Technicians should inspect the bucket for cracked mounting ears,stripped coupling splines,and contamination that can interfere with the auger load or motor current draw before deciding on replacement.
Compatibility and installation require matching the bucket’s locating features and coupling geometry to the refrigerator’s ice-delivery hardware; similar-looking buckets may differ in pin spacing, flap hinge design, or the presence of a sensor actuator. Replacement procedure generally involves removing the ice bin trim or shelf, disengaging the auger from the drive shaft, removing the old bucket by lifting out on its locating ears, and seating the new bucket so that the coupling engages smoothly and any sensor actuators align. after installation, rotate the auger by hand to confirm free movement and run a short dispense cycle to verify motor load and proper sealing at the chute.
- Verify part number: Confirm 241734001 matches the refrigerator model and the bucket’s locating/auger interface before installation.
- Inspect mounting ears and coupling splines for wear or damage that will cause improper engagement.
- Ensure gaskets or chutes that contact the bucket are intact to prevent leaks or ice jam formation.
- Hand-rotate the auger after seating the bucket to confirm clearance and correct spline engagement.
- Perform a functional test cycle and check motor current for abnormal load indicating binding or misalignment.
| Item | Description |
|---|---|
| Mounting interface | Locating ears and seating ledges that determine lateral and vertical position in the freezer cavity |
| Auger coupling | Spline or boss geometry that transfers torque from the motor; mismatch causes slipping or high current |
| Material & common faults | molded thermoplastic; common failures include cracked ears, stripped splines, and worn mating surfaces |
Q&A
What is Frigidaire part 241734001?
Part 241734001 is the replacement ice bucket (ice storage bin) designed for certain Frigidaire refrigerator freezers. It is indeed the receptacle that collects and stores ice from the automatic ice maker and usually interfaces with the ice-dispenser auger or discharge mechanism.
How do I no if 241734001 is compatible with my refrigerator?
Check the refrigerator model number (usually on a sticker inside the fresh food compartment or on the cabinet wall). cross-reference that model number with the part listing from Frigidaire,the appliance manual,or a reputable parts dealer. Do not rely solely on visual similarity-different models can use buckets with different mounting tabs,auger openings,or sensor cutouts.
How do I remove and install the 241734001 ice bucket?
Generally you remove the bucket by opening the freezer door, lifting the bucket slightly and pulling it straight out. Some models have retaining tabs or a screw-consult your owner’s manual. To install, align the bucket with the guide rails and slide it in until it seats and engages the auger or latch. For safety, switch off the ice maker or unplug the refrigerator before working near electrical components.
My ice dispenser is jamming-could the ice bucket (241734001) be the problem?
Yes. Jamming can be caused by a cracked or warped bucket that misaligns the auger,broken or worn engagement tabs/gears,or ice packing/clumping inside the bucket. Inspect the bucket for cracks, damaged mounts, and obstructions. Also check the auger and motor coupling inside the bucket area. Correcting bucket damage or clearing compacted ice often restores normal operation.
Can I clean the 241734001 ice bucket in the dishwasher?
Most plastic ice buckets should be hand-washed with warm water and mild detergent to avoid warping from high dishwasher temperatures. Avoid harsh abrasives and strong chemical cleaners (including bleach) unless the manufacturer’s instructions explicitly allow them. Rinse thoroughly and dry before reinstalling to prevent odors and ice contamination.
What should I do if the ice bucket is cracked or leaking?
If you find cracks or structural damage, replace the bucket. Small cracks can allow water to leak or ice to fall into mechanisms and can cause further damage to the auger or motor. Temporary fixes (epoxy, tape) are not recommended because they may contaminate ice; use the OEM part or an approved replacement.
Is 241734001 an OEM part, and are aftermarket buckets acceptable?
Part 241734001 is an OEM Frigidaire part number. Aftermarket buckets may fit and be less expensive, but quality, fit, and the positioning of tabs or auger interfaces can vary. For reliable operation and correct fit,OEM parts are recommended-especially for models with integrated sensors or unique mounting points.
Any tips before ordering or replacing the ice bucket?
Confirm your refrigerator model number and the part number before ordering. Turn off the ice maker or power to the fridge before removing the bucket to avoid running motors or trapping fingers. Transfer any sensors or auger assemblies only if required and as instructed by the manual. Keep the serial/model info and installation instructions handy, and dispose of the old bucket properly.
Closing Remarks
The 241734001 Frigidaire refrigerator ice bucket serves a straightforward but essential role in the overall ice production and dispensing system: it collects and stores ice produced by the ice maker, stabilizes the supply for dispensing, and helps maintain sanitary separation between the ice and other refrigerator contents. As a purpose-designed component, its fit, material integrity, and interaction with the ice maker and dispenser mechanisms directly affect ice quality, dispensing reliability, and user convenience. Proper functioning of the ice bucket contributes to efficient appliance operation and helps prevent issues such as jamming, contamination, or accelerated melting that can arise from a damaged or ill-fitting bucket.
Because the ice bucket is a small component with an outsized impact on performance, accurate diagnosis and timely replacement are important when problems are suspected. Inspecting the part for cracks, warping, misalignment, or interference with sensors and drive mechanisms can identify whether repair or replacement is required; confirming model compatibility (241734001) and using a correct replacement ensures proper fit and operation. When in doubt, follow manufacturer guidance or consult a qualified technician to avoid unintended damage during diagnosis or installation. replacing a compromised ice bucket with a properly matched unit restores functionality, maintains hygiene, and can prevent secondary failures in the ice system, making measured diagnosis and appropriate replacement a cost-effective maintenance step for Frigidaire refrigerators.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
