240359001 Frigidaire Refrigerator White Door Shelf Bin is a molded plastic storage component designed to mount to the interior door liner of compatible Frigidaire refrigerators. It functions as a removable shelf bin-commonly called a door bin or dairy/bin shelf-providing organized storage for bottles, jars and small containers; the part is typically injection-molded polypropylene or a similar thermoplastic with molded mounting tabs, a retaining lip and a front guard to secure contents during door movement.
Inside the appliance, the door shelf bin interfaces mechanically with the door liner and its mounting posts or clips; it contributes to load distribution on the door and must clear the gasket and adjacent shelves to avoid interfering with door closure.Although not part of the refrigeration or electrical subsystems, a damaged or improperly seated bin can effect door sealing, increase hinge loading and create localized obstruction to cold air flow when overloaded or misaligned. Common interaction points for a technician to consider are the molded mounting tabs, the retention surfaces on the door liner, and the relation of the bin to the door gasket and adjacent storage components.
In this article readers will learn how the 240359001 Frigidaire refrigerator White Door Shelf Bin functions, how to determine compatibility with specific refrigerator door liners, typical failure symptoms (cracked bin body, broken mounting tabs, sagging or clearance interference), basic troubleshooting steps to diagnose fit and alignment problems, and practical replacement considerations such as verifying the exact part number, matching mounting geometry and color, and assessing weather an OEM or compatible replacement is appropriate. The coverage is aimed at providing the technical context needed for a technician, engineer or appliance owner to inspect, diagnose and plan a safe replacement or repair.
Table of Contents
- Functional role, mechanical load limits, and material specifications of the door shelf bin
- How the 240359001 Frigidaire Refrigerator White Door Shelf Bin integrates with the door assembly, sealing elements, and internal airflow
- Common failure symptoms, structural damage patterns, and diagnostic indicators of a failing door shelf bin
- Replacement considerations, model compatibility, and step-by-step installation procedure for the door shelf bin
- Q&A
- Wrapping Up
Functional role, mechanical load limits, and material specifications of the door shelf bin
the 240359001 Frigidaire Refrigerator White Door Shelf Bin functions as a cantilevered storage ledge mounted to the inner door liner; it retains bottles, jars, and small containers while accommodating door motion and user loading. The bin is an injection-molded opaque plastic component designed to engage molded rail features or snap-tab anchors in the door liner so the load transfers into the door structure rather than the liner skin. In practice, the bin’s geometry - including the retention lip, front flange, and back support tabs – controls how items are seated and how impact or torque from opening and closing the door is distributed across the mounting points. Typical material choices for these bins are high-impact thermoplastics such as ABS or HIPS formulated for low-temperature toughness and resistance to repetitive flexing; surface finish and wall thickness are selected to minimize stress concentrators at the snap locations.
Mechanical behavior of the shelf is governed by cantilever bending of the bin wall and localized stresses at the mounting clips; therefore both distributed and point loads should be considered when assessing serviceability. As a practical guideline, many full-width refrigerator door bins are conservatively rated to support roughly 10-20 lb (4.5-9 kg) of distributed static load, while narrower or half-width bins are commonly limited to lower values (approximately 5-10 lb / 2.3-4.5 kg); concentrated loads-such as a single heavy glass bottle placed at the outermost edge-increase the risk of stress cracking. Inspect the bin for hairline cracks at the snap tabs and permanent deformation (creep) of the flange if loads approach these ranges. If mounting clips on the door liner are damaged or worn, replacement of the bin alone may not restore full load capacity and both the bin and its mating hardware should be evaluated before returning the appliance to normal use.
- Inspection checklist: check snap-tab integrity, look for cracks at flange corners, verify uniform seat on door rail, and confirm alignment of retention lip.
| Item | Description |
|---|---|
| Material | Opaque injection-molded thermoplastic (commonly ABS or HIPS) selected for impact resistance and low-temperature toughness |
| Mounting | Snap-tab or rail engagement into door liner; load path transfers to door structure via molded supports |
| Typical maximum recommended static load | Full-width: ~10-20 lb (4.5-9 kg) distributed; Narrow: ~5-10 lb (2.3-4.5 kg) – avoid concentrated edge loads |
| common failure modes | Snap-tab fracture, flange creep, stress cracking at corners, and abrasion wear from repeated loading |
| Compatibility | Direct replacement when marked for the same part number and door liner configuration; verify fit against existing mounting rails |
How the 240359001 Frigidaire Refrigerator White Door shelf Bin integrates with the door assembly, sealing elements, and internal airflow
The 240359001 Frigidaire Refrigerator White Door Shelf Bin is an injection-molded storage component that fastens into the refrigerator door liner using molded retention tabs and rails. Functionally, it serves as both a load-bearing storage surface and a shaping element at the door interior that must coexist with the door gasket and the liner’s sealing geometry. When installed correctly, the bin’s flange and clip locations align with the door’s mounting bosses so the bin does not intrude on the gasket compression zone; a misaligned or damaged bin can create a local gap that reduces seal effectiveness and increases heat ingress at the door perimeter. The bin’s open or louvered wall sections are deliberately sized to limit obstruction of internal airflow paths, allowing cold air to circulate past the door cavity and helping preserve temperature uniformity near the door shelves.
Mechanically, the shelf bin experiences repeated thermal cycling and mechanical loading; polymer creep or fractured clips are common failure modes that change the bin’s positional relationship to sealing elements and to adjacent evaporator ducting. Technicians should inspect clip integrity, verify a tactile “snap” into the liner rails during installation, and confirm uniform gasket seating after adding loaded bins-overloading high-mounted bins increases door torque and can produce progressive seal wear. In service diagnostics, removing the bin to observe door-closing behavior and airflow (for example, verifying that evaporator discharge vents are not blocked by an ill-fitting bin) is a quick way to determine whether the shelf is contributing to temperature or sealing issues.
- Mounting: molded retention tabs/rails that engage door liner bosses; proper engagement prevents gasket interference.
- Interactions: bin geometry must avoid the gasket compression zone and should not block evaporator vents or interior airflow channels.
- Failure indicators: cracked clips, sagging bin, uneven gasket compression, or localized warm spots near the door edge.
| Item | Description |
|---|---|
| Mount type | Molded clips/rail that insert into door liner bosses; requires full engagement for correct positioning. |
| Material | Rigid thermoplastic designed to resist creep under typical door storage loads and thermal cycles. |
| Compatibility | OEM replacement designed for specific Frigidaire door assemblies; confirm model fit by part number before installation. |
Common failure symptoms, structural damage patterns, and diagnostic indicators of a failing door shelf bin
The 240359001 Frigidaire Refrigerator White Door Shelf Bin is a molded thermoplastic storage component that provides localized load-bearing and retention for items stored in the refrigerator door. it interfaces with the door inner panel using molded mounting bosses and clip features; compatibility with a given Frigidaire door is persistent by peg spacing, boss diameter, and clip geometry rather than color or overall length alone. Functionally the bin must resist bending under point loads (for example, gallon jugs on the lower bins) and maintain a sealed clearance from the door gasket; common failure modes originate from stress concentration at the mounting bosses and along the front lip where repeated loading or impact produces cracks or plastic creep.
- Cracks or fractures at the mounting bosses or front lip visible under normal load.
- Permanent deflection or warping of the shelf floor resulting in reduced vertical clearance.
- Loose fit or lateral play on the door posts causing rattling or the bin to drop out when the door is opened.
- Retention clip wear or shearing that prevents secure engagement with the door panel.
- Chemical etching/discoloration from cleaning agents that embrittles the plastic over time.
Diagnosis combines visual inspection and mechanical verification: check the integrity of the mounting bosses and the clip engagement, apply a representative load (such as a gallon container) to observe deflection or propagation of hairline cracks, and measure peg spacing to verify compatibility before replacement. A practical repair decision is based on whether the damage is localized (repair or reinforce) or structural (replace the bin); replacement with a correctly specified unit eliminates fit-related issues and restores designed load behavior. When documenting a failure, photograph the boss area and measure any gap between bin and door inner panel to quantify wear or deformation.
| Item | Description |
|---|---|
| Mounting boss | Common fracture point where snap-on engagement transfers shear and bending loads to the door panel. |
| Retention clip | Plastic tab that secures the bin; wear or shear leads to loose fit and bin drop hazards. |
Replacement considerations, model compatibility, and step-by-step installation procedure for the door shelf bin
The 240359001 Frigidaire Refrigerator White Door Shelf Bin is a molded door storage component designed to engage the refrigerator door’s molded support rails and retain small items such as condiments, bottles, and dairy containers. Functionally, the bin transfers vertical and lateral loads to the door’s molded mounting points through rear tabs or a lip that snaps into place; wear or breakage of those tabs is the most common cause of failure rather than cracking of the bin body itself. Compatibility depends on the door rail geometry and the shape and spacing of the mounting tabs, so confirm that the replacement matches the original bin’s rear tab profile and engagement method before ordering or installing.
Replace the bin by removing stored contents,inspecting the door rail and retaining clips for damage,and installing the new bin so that its tabs fully seat into the door sockets and the front lip rests on the lower retention ledge. Technicians should verify mounting tab spacing and orientation against the door prior to forcing engagement; if clips are broken or the rail is deformed, replace or repair those features first. Practical examples: on a door with two discrete rectangular sockets, insert the top edge of the bin at an angle and lower until the tabs click into place; on doors with continuous rails, slide the bin laterally until the front lip engages and then press to secure.
- Empty the bin and clear nearby shelving to provide access.
- Inspect door mounting sockets and retaining clips for cracks or deformation; replace damaged clips before proceeding.
- Align the bin’s rear tabs with the door sockets, engaging the top edge first if tab geometry requires.
- Press the bin firmly until you hear or feel the tabs seat; confirm the front lip sits on the retention ledge.
- Gently apply moderate downward and lateral force to verify retention; do not overload the bin with concentrated heavy items after installation.
| Item | Description |
|---|---|
| part number | 240359001 |
| Mounting style | Rear tab/snap-in engagement to molded door sockets |
| Typical failure modes | Broken rear tabs,worn sockets,stress cracking from concentrated loads |
| service tip | Measure tab spacing and inspect door sockets before installation; replace damaged clips to ensure retention |
Q&A
What is part 240359001 (Frigidaire Refrigerator White Door Shelf Bin)?
part 240359001 is a replacement door shelf bin made for Frigidaire refrigerators. It is the white plastic shelf that mounts to the inside of the fresh-food door to hold bottles, condiments and other small items. It is indeed sold as the specific replacement for models that list that part number in their parts diagram.
How can I tell if 240359001 will fit my refrigerator model?
Check your refrigerator model number (usually on a sticker inside the fresh-food compartment or on the door frame) and compare it to the parts diagram on the Frigidaire parts website or your owner’s manual. You can also compare the old bin’s part number (sometimes molded into the plastic) or measure the mounting hook spacing and overall width. If the seller lists compatibility or provides a model lookup,use that to confirm fit.
How do I remove the old door shelf bin and install the 240359001 bin?
Empty the bin and any items on the door. Support the bin with one hand, then either lift it up slightly and pull straight out or unclip it (depending on the hinge type). To install, align the mounting hooks/lip with the door liner slots, insert the top edge and press down until it snaps into place.No special tools are usually required. Take care to avoid forcing brittle plastic tabs.
What should I do if the replacement bin is loose or won’t snap into place?
First verify you have the correct part for your model. Inspect the door liner slots and the bin’s mounting hooks for damage, dirt or plastic fragments; clean them if needed. If mounting tabs on the door are broken, the bin will not secure properly and the door liner or the retainer clips may need repair. In some cases a different bin with the correct hook spacing is required.
Can I wash the 240359001 bin in the dishwasher?
Hand-washing with warm water and mild detergent is recommended. High dishwasher temperatures or harsh detergents can warp or discolor some refrigerator plastics, so avoid regular dishwasher use unless the manufacturer specifically states the part is dishwasher-safe.
Is 240359001 an OEM (original) Frigidaire part or an aftermarket replacement?
240359001 is the Frigidaire part number for that white door shelf bin and is typically sold as an OEM replacement. When buying, confirm the seller’s description if you require genuine OEM parts-some listings may offer compatible aftermarket bins that fit but are not manufactured by Frigidaire.
How do I measure the bin to make sure a replacement will fit?
Measure the overall width of the bin, the depth from the door liner to the front edge, and the vertical height. Critically measure the distance between the centers of the mounting hooks or the spacing of the hook points that engage the door liner. Compare those measurements to the replacement part’s specs or the original bin to ensure correct fit.
Are there color or style alternatives for the 240359001 bin (for example clear instead of white)?
Yes – some replacement bins come in different colors or clear plastic. However, color or transparency does not guarantee the same mounting geometry. Always check that the replacement part number or mounting hook design matches your original bin before assuming it will fit just because the dimensions look similar.
Wrapping up
The 240359001 Frigidaire Refrigerator white Door Shelf Bin serves a straightforward but important role in refrigerator organization and functionality. As a door-mounted storage component, it supports and secures frequently accessed items, helps maximize usable interior space, and contributes to consistent door sealing and temperature control by maintaining an orderly interior layout.In this capacity, a sound door shelf bin supports food safety, convenience, and the overall performance of the appliance.
Proper diagnosis is essential before replacing a door shelf bin. Inspecting for visible damage, warping, or mounting failures-and confirming that stored items or installation issues are not the root cause-ensures that replacement is warranted. When replacement is necessary, selecting the correct part number and following manufacturer installation guidance preserves fit and function; incorrect or improper replacement can led to further damage or reduced appliance efficiency.
Timely and appropriate replacement of the 240359001 bin, whether performed by a qualified service technician or a careful, informed owner, helps maintain refrigerator reliability and prolongs appliance life. By combining accurate diagnosis, the use of compatible parts, and adherence to recommended procedures, owners can maintain performance, protect food quality, and avoid unneeded repairs or costs.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
