316272000 Frigidaire Igniter and Orifice Holder is a replaceable ignition assembly used on many Frigidaire gas cooktops and ranges that combines the ignition electrode and the gas orifice mounting in a single component. The part typically consists of a metal or ceramic electrode, an orifice-retaining boss, and mounting features that position the orifice relative too the burner ports; it is designed to mate wiht the appliance’s burner head and gas manifold. As a discrete mechanical and electrical subassembly, it is intended to be swapped during field service when ignition geometry or orifice alignment is compromised.
Inside the appliance the igniter and orifice holder serves two primary functions: it locates and secures the gas orifice that meters fuel from the manifold, and it positions the ignition electrode so a spark (or hot surface in some designs) reliably lights the gas exiting the burner ports. The component interfaces directly with the gas valve/manifold, the burner head, and the ignition wiring or control module; its mechanical alignment affects flame shape and combustion, while its electrical connections affect spark timing and reliability.As it establishes the physical and electrical relationship between fuel delivery and ignition, wear, misalignment, or contamination at this interface can produce delayed ignition, weak flames, or safety concerns such as unburned gas accumulation.
This article will explain the 316272000 component’s function and construction, outline model compatibility and the dimensional/electrical details relevant to replacement, describe common failure symptoms (for example, no spark, intermittent ignition, or poor flame pattern), and present diagnostic checks and troubleshooting steps a technician or appliance owner can use to isolate the fault. It will also cover practical replacement considerations including verifying part fitment, proper mounting and sealing, basic electrical checks, and safety precautions such as shutting off gas and power and performing leak and operational checks after service.
Table of Contents
- Function and Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
- How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance
- Common Failure Symptoms and Diagnostic Indicators of Igniter and Orifice Holder Malfunction
- Replacement Considerations and Step-by-Step Installation Procedures for the Igniter and Orifice Holder
- Q&A
- To Conclude
Function and Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
The 316272000 Frigidaire Igniter and Orifice Holder is a combined mounting assembly that positions the high-voltage ignition electrode relative to the burner and secures the gas orifice (jet) in the correct location beneath the burner cap. The assembly ensures a consistent spark gap and a fixed distance between the electrode and the gas stream so ignition timing and flame shape remain repeatable across cycles. Mechanically, the holder provides electrical insulation and a rigid attachment point to the burner box; hydraulically, the orifice mount centers and seals the jet so the appliance receives the intended metered flow for the selected orifice size (natural gas vs. LP). In service environments this part affects both ignition reliability and combustion quality, so electrode erosion, ceramic cracking, or a dislodged orifice will produce observable ignition and flame irregularities.
- symptoms indicating service: continuous clicking with no ignition, delayed ignition (puffing), weak or yellow-flaming burners, visible electrode damage or ceramic cracks, and gas odor suggesting a loose seal.
For technicians and appliance owners, verify compatibility and correct orifice sizing before replacement; the holder must match the burner geometry and the orifice must correspond to the fuel type. during replacement, isolate gas and power, confirm the electrode-to-burner alignment and secure the orifice with the proper sealing washer or thread compound rated for gas service. Electrical checks often begin with verifying the ignition transformer and harness continuity,but visual inspection of the electrode tip and ceramic insulator is frequently the faster diagnostic for this assembly. Using the correct torque on the holder and preserving the spark gap alignment prevents recurrent misfires or flame instability after installation.
| Item | Description |
|---|---|
| Igniter (electrode assembly) | High-voltage electrode mounted on an insulated bracket that produces the spark and maintains a fixed gap to the burner. |
| Orifice holder (jet mount) | Mechanical mounting and sealing point for the metering orifice; centers the jet under the burner and secures correct fuel flow. |
How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance
The 316272000 Frigidaire igniter and orifice Holder positions and secures both the spark igniter and the gas orifice at the burner manifold so ignition occurs reliably and with the correct air/fuel mixture. The holder maintains the physical gap between the igniter electrode and the orifice, keeps the orifice oriented for consistent gas flow, and provides thermal and electrical isolation using heat-resistant materials. In practical terms, the assembly ensures the igniter produces a spark at the precise location where gas exits the orifice; any shift in alignment, cracked ceramic, or clogged orifice alters flame shape, causes repeated clicking, delayed ignition, or a yellow/sooty flame pattern.
- Primary functions: secure igniter, position orifice, prevent electrical shorting, and resist heat and combustion byproducts.
- Common symptoms of failure: intermittent ignition, continuous spark cycling, weak or irregular flame, and gas smell prior to ignition.
- Compatibility note: the holder is used on select Frigidaire gas ranges/ovens and should be matched to OEM specifications for mounting hole spacing and orifice thread/size.
- Installation checks: confirm igniter gap, clear orifice of debris, verify manifold seal and correct torque on mounting fasteners.
Technically,troubleshooting begins with a visual inspection of the holder for cracked insulation,carbon deposits,or loose fasteners; measure igniter resistance and verify the electrode-to-orifice gap against service specifications to isolate mechanical from electrical faults. When replacing the component,use the exact mounting pattern and orifice sizing called out in the appliance service manual because mismatched holders can change gas flow characteristics and flame safety circuit behavior. For technicians, routine practices include checking for proper grounding of the manifold, testing valve operation under load, and confirming that the replacement holder seats flush to prevent gas leakage or altered combustion dynamics.
| Item | Description |
|---|---|
| Material | Heat-resistant ceramic/metal composite to provide insulation and structural support |
| Mounting | Manifold-mounted with specific hole spacing; must match OEM pattern |
| function | aligns igniter and meters gas via orifice for consistent ignition |
Common Failure Symptoms and Diagnostic Indicators of Igniter and Orifice Holder Malfunction
The 316272000 Frigidaire Igniter and Orifice Holder combines the ignition electrode and the gas orifice mounting into a single assembly that maintains the precise spatial relationship required for reliable spark ignition. The part secures the orifice in the burner tube and positions the electrode tip promptly adjacent to the gas jet so the high-voltage spark reliably bridges into the fuel stream; if the holder is bent or the electrode insulation is compromised, the spark will divert or extinguish before the gas reaches a combustible mixture. Compatibility is mechanical and fluid-dynamic: the orifice size, thread, and seal geometry must match the appliance’s burner and fuel type, and replacement parts should be matched to the appliance model to preserve correct gas flow and flame characteristics.
Technicians diagnose failures by observing ignition behavior, inspecting the assembly for physical damage or carbon tracking, and isolating the igniter from upstream control and wiring faults. Typical diagnostic indicators include intermittent or continuous sparking, delayed ignition with a strong gas smell, or a weak/yellow flame that suggests partial blockage or misalignment. Practical checks include a visual inspection for cracks or carbon deposits at the electrode, confirming the electrode tip is not grounded to adjacent metal, verifying the orifice is free of debris, and confirming the ignition control is producing the expected high-voltage pulse at the connector; if those checks are inconclusive, swapping the assembly with a known-good unit or measuring control-module output while observing spark behavior can quickly separate a module fault from a mechanical issue.
- intermittent ignition or delayed ignition after repeated clicks
- Continuous sparking after flame establishment (pilot fail-sense)
- Weak, lifting, or yellow flame near the burner – possible partial orifice blockage
- Visible carbon tracking, cracked ceramic insulation, or bent electrode tip
- Gas odor with no ignition – indicates flame failure with potential safety risk
| Item | Description |
|---|---|
| No spark at electrode | Check wiring and control-module output; inspect electrode insulation and connector continuity. |
| Continuous sparking | Electrode may be shorted to ground or flame-sensing circuit not detecting flame; inspect for carbon tracking and alignment. |
| Weak/yellow flame | Orifice partially blocked or incorrect orifice; clean or replace orifice and verify correct part match for fuel type. |
Replacement Considerations and Step-by-Step Installation Procedures for the Igniter and Orifice Holder
The 316272000 Frigidaire Igniter and Orifice Holder is a combined ignition component that positions the gas orifice relative to the igniter while providing the mechanical mount and sealing surface for the burner assembly. Functionally, the igniter provides the thermal or spark source to initiate combustion while the orifice holder precisely locates the metering orifice so the burner receives the correct fuel jet. When evaluating replacement,inspect the igniter element for cracks,the electrical pigtail and connector for corrosion,and the orifice seat and gasket for deformation or carbon buildup.Verify compatibility with the appliance model number and gas type, and compare mounting dimensions and connector style rather than relying solely on part number similarity to ensure proper fit and safe operation.
Installation requires careful handling to preserve alignment and gas integrity; follow a controlled sequence and verify each functional check. Before beginning, disconnect electrical power and shut off the gas supply, then support the burner assembly to avoid stress on adjacent parts while removing fasteners. after installing the new unit,confirm the igniter-to-orifice spacing and secure fasteners to a snug,consistent torque,restore power and gas,and perform an operational check for reliable ignition and a stable flame. perform a soap-bubble leak test at the gas connection and observe several ignition cycles to ensure repeatable lighting and no delayed heat-up that indicates a weak igniter or partial obstruction.
- Turn off power and gas, remove access panel, and support burner assembly.
- Disconnect wiring harness and remove mounting screws holding the old assembly.
- Inspect and clean the burner throat and orifice seat; replace gasket/O-ring if damaged.
- Install new assembly with correct orientation,reconnect harness,and tighten fasteners evenly.
- Restore gas and power, check for leaks, and run several ignition cycles while observing flame pattern.
| Item | Description |
|---|---|
| Part | 316272000 Frigidaire Igniter and Orifice Holder – combined igniter mount and orifice locating component |
| Critical checks | Verify connector type, inspect gasket/seal, confirm igniter integrity and alignment |
| Compatibility | Match appliance model and gas type; confirm physical dimensions and connector style |
Q&A
What is Frigidaire part 316272000?
Part 316272000 is an OEM Frigidaire igniter and orifice holder assembly used on gas ovens and ranges. it combines the oven surface that glows to ignite gas (the igniter) with the mounting piece that holds the burner orifice/nozzle in place. It’s sold as a repair part for models that use that specific assembly.
How do I know if the 316272000 igniter and orifice holder is the correct part for my appliance?
verify by checking your appliance model number (usually on a tag behind the oven door, on the frame, or on the back of the range) and cross-referencing that model with the part number in the Frigidaire parts lookup or the parts distributor’s compatibility list. Photos of the existing assembly and the connector style also help confirm a match. If in doubt, provide the full appliance model number to the parts supplier or technician.
What are the common symptoms that this part has failed?
Common signs include the oven not lighting or taking a long time to light (delayed ignition),the oven cycles on and off,weak or no flame,clicking or humming from the igniter area,or an obvious break in the igniter element. You may also smell gas before ignition if the igniter isn’t reaching the required temperature to open the safety gas valve.
How can I test the igniter to determine if it needs replacement?
Frist disconnect power and gas. Visually inspect the igniter for cracks or breaks. Use a multimeter to check continuity/resistance across the igniter-an open circuit indicates failure. For a more definitive test,a clamp ammeter on the igniter’s power lead while calling for heat can show whether the igniter draws sufficient current to open the gas valve (consult the service manual for the exact amp spec; typical safety igniters frequently enough require around 2-4 A). If it does not reach the specified current or shows open circuit, replace it.
Can I replace only the igniter or do I need to replace the whole 316272000 assembly?
That depends on the specific purchase option and the condition of the orifice holder. Many suppliers sell the igniter separately and also sell the combined 316272000 assembly. If the orifice holder is damaged, corroded, or if you’re converting gas type (natural to LP), replace the whole assembly. If the holder is serviceable and the igniter is the only failed component, replacing just the igniter is often acceptable-confirm compatibility before ordering.
What tools and steps are required to replace the 316272000 igniter and orifice holder?
Basic tools: nut driver or socket set, Phillips screwdriver, adjustable wrench, needle-nose pliers, and optionally a multimeter and clamp ammeter for testing. Steps (high-level): 1) Turn off electricity and shut off the gas supply. 2) Remove the oven bottom or access panel to reach the igniter/orifice assembly. 3) Disconnect electrical connector(s) to the igniter. 4) remove mounting screws/bolts securing the assembly and detach the gas orifice if needed. 5) Install the replacement assembly in the correct orientation, secure fasteners, reconnect wiring, and restore panels. 6) Turn gas back on and test for proper ignition and any gas leaks (soap solution-no open flame). If you’re unsure, have a qualified technician perform the replacement.
Do I need a different orifice when converting my oven from natural gas to LP?
Yes. LP (propane) requires a smaller orifice to reduce gas flow because propane operates at a higher pressure and has different BTU characteristics. If you’re converting fuel type, use the correct LP orifice (and any specified regulator changes) and follow Frigidaire’s conversion instructions or have a certified technician perform the conversion. The orifice holder may accept interchangeable orifice fittings, but you must install the correct orifice for safe operation.
What safety checks should I perform after installing the new igniter and orifice holder?
After installation and reassembly: 1) Restore power and gas and cycle the oven to observe normal ignition without long delays. 2) Check for gas leaks at the orifice and gas connections using a soap-and-water solution-bubbles indicate a leak. 3) Ensure flames are steady and blue (not large yellow/tipping). 4) Verify there’s no persistent gas odor. If you detect leaks or abnormal flame behavior, shut off gas and electricity and call a qualified technician.Never test for leaks with an open flame.
To Conclude
The 316272000 Frigidaire igniter and orifice holder are integral components in gas cooking appliances, combining the ignition source and the gas flow interface that together ensure reliable flame initiation and stable burner performance. Properly functioning igniters provide consistent sparks or hot-surface ignition while the orifice holder positions and seals the gas orifice to maintain correct fuel delivery and combustion. Together these parts contribute directly to safe operation, efficient cooking, and the overall longevity of the appliance.
Accurate diagnosis and timely replacement of a faulty 316272000 assembly are vital to maintain appliance safety and performance. Troubleshooting should confirm whether issues stem from the igniter, the orifice holder, associated wiring, or gas supply before replacing parts. When replacement is required, using the correct part number and following manufacturer guidelines-or engaging a qualified technician-helps ensure proper fit, secure gas connections, and reliable operation. Attending promptly to ignition or orifice problems reduces the risk of inefficient combustion,repeated failures,or safety hazards and supports consistent,efficient use of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
