W11087376 Whirlpool PUMP&MOTOR OEM is a pump-and-motor assembly intended for use in Whirlpool dishwashers and compatible appliance models.It combines an electric motor, impeller, and housing to move and evacuate water within the appliance; as an OEM (original equipment manufacturer) component it is built to match the mechanical and electrical interfaces of specified factory models rather than serve as a generic replacement. This component is a discrete electromechanical unit rather than a simple valve or sensor, and its construction typically includes the motor stator and rotor, an impeller or pump chamber, seals or gaskets, and an electrical connector or harness.
Inside the appliance the pump-and-motor assembly performs primary water movement functions-circulating wash water to spray arms during the wash and rinsing cycles and pumping waste water to the drain during drain cycles. It interacts with the control board (receiving run and drain commands and sometimes feedback), the inlet valve and spray assembly (by providing the flow that the spray arms distribute), and the drain path (including check valves and hoses). Proper motor operation, impeller integrity, and sealing are critical to maintain flow rates, prevent leaks, and avoid secondary faults such as motor overheating or control-board error codes caused by electrical overloads or blocked discharge paths.
In this article readers will find a technical overview of the W11087376’s function and typical installation locations, guidance on model compatibility and OEM versus aftermarket considerations, common failure symptoms to recognize, and a systematic approach to troubleshooting electrical and hydraulic issues. The article will also cover practical replacement considerations-mechanical mounting, electrical connections, seal and hose inspection, and safety precautions-to help technicians, engineers, and informed appliance owners assess repair options and understand when substitution or full-unit replacement is appropriate.
Table of Contents
- Function and Role of the Drain Pump and Motor Assembly in Whirlpool Dishwashers
- How the W11087376 Whirlpool PUMP&MOTOR OEM Works Inside the Appliance
- Diagnostic Indicators and Common Failure Symptoms of the Pump & Motor Assembly
- Replacement Considerations, Mounting, Electrical Connections and Sealing Procedure for W11087376 Whirlpool PUMP&MOTOR OEM
- Q&A
- The Conclusion
Function and Role of the Drain Pump and Motor Assembly in Whirlpool Dishwashers
The drain pump and motor assembly is the mechanical system responsible for evacuating wash water from the sump and routing it out through the dishwasher drain hose. The assembly labeled W11087376 Whirlpool PUMP&MOTOR OEM comprises an electric motor coupled to an impeller housed in a molded volute; when energized by the appliance control, the motor turns the impeller to develop flow and pressure sufficient to overcome the drain hose and air gap restrictions. The volute and impeller geometry determine the pump’s hydraulic performance,while the housing and shaft seal protect the motor from water ingress.in many whirlpool designs this assembly also integrates check-valve features and discrete mounting points so the replacement part aligns with the original plumbing and chassis connections.
Technically, failures of the pump/motor assembly manifest either mechanically (blocked or damaged impeller, seized shaft, leaking seal) or electrically (open winding, intermittent commutation, or failed brushes in DC-type units). Practical diagnostics begin with a visual check for foreign objects in the impeller area and a resistance/continuity check of the motor windings with the unit isolated from mains power. If the motor hums but does not rotate, the impeller may be jammed or the starting circuit failed; if the motor shows an open winding, replacement is required. Replacing with the W11087376 assembly preserves original connector pinout, mounting geometry, and fluid pathways, but always verify chassis compatibility and wiring harness match before installation to avoid cross-model mismatches.
- No drain or slow draining with standing water after cycle completion
- Humming noise from beneath the tub without water movement
- Intermittent draining or dishwasher error codes relating to drain pump
- Visible leaks from pump housing or degraded seal material
| Item | Description |
|---|---|
| Primary function | Remove wastewater from sump and provide discharge pressure to clear drain hose and air gap |
| Common diagnostics | Visual impeller inspection, rotor continuity test, free-spin check, and verification of control board drive signal |
| Installation note | Confirm mounting orientation, connector pinout, and hose attachment positions match the original unit before final installation |
How the W11087376 Whirlpool PUMP&MOTOR OEM Works Inside the Appliance
The W11087376 Whirlpool PUMP&MOTOR OEM is an integrated pump-and-motor assembly that sits at the base of compatible Whirlpool washing machines and handles the mechanical transfer of water during drain and certain circulation phases. The assembly consists of a sealed pump housing and impeller directly coupled to an electric motor, plus the sealing surfaces and mounting flanges needed to interface with the tub, drain hoses, and the appliance wiring harness. Technicians should confirm compatibility by matching the appliance model number, connector type, and mounting pattern because correct hose orientation, electrical connector pinout, and gasket fit are necessary for reliable operation and to avoid leaks or misrouting of discharge flow.
Functionally, the motor converts electrical input from the machine control into rotational torque that drives the impeller, creating a pressure differential that moves water through the drain system. Typical electrical behavior is on/off control from the washer’s control board or a relay; the assembly may include an internal thermal protector and uses simple, robust motor windings and bearings that are subject to wear.Practical diagnostics include checking for continuity across the motor windings, verifying that the impeller can turn freely (no foreign-object jam), and inspecting seals for water ingress. When replacing the unit,verify that mounting screws,hose clamps,and the wiring plug match the appliance; replacing with the correct OEM part minimizes fitment and electrical-matching issues.
- No drain but motor hums – possible impeller jam or broken coupling.
- Intermittent operation - check wiring harness and control board relay outputs.
- Visible leaks – worn seals or cracked pump housing require replacement.
- Grinding or loud noise - bearing or debris in the impeller chamber.
| Item | Description |
|---|---|
| Function | Creates flow for draining and circulation by driving an impeller with an electric motor. |
| Common failures | Impeller blockage, seal leakage, bearing wear, motor winding or connector failure. |
| Diagnostics | Measure motor continuity, inspect impeller rotation, check for leaks and wiring integrity. |
| Compatibility | Match part number, mounting pattern, hose outlets, and electrical connector to the appliance model. |
Diagnostic Indicators and Common Failure Symptoms of the Pump & Motor Assembly
The W11087376 Whirlpool PUMP&MOTOR OEM is a combined fluid-handling and drive assembly that provides the mechanical force for water movement and drainage in compatible Whirlpool appliances. In normal operation the electric motor should provide smooth, continuous rotation of the impeller with consistent current draw and without unusual vibration; the assembly’s mechanical interface (mounting flange, shaft length, and electrical connector) must match the appliance harness and housing to ensure compatibility. technicians should verify that the replacement unit duplicates the original unit’s mounting geometry and connector pinout before installation to avoid misalignment, connector mismatches, or incorrect supply voltage submission that can cause premature failure.
Common failure modes produce repeatable diagnostic indicators useful for troubleshooting: electrical faults (open or shorted windings, intermittent connections) typically show abnormal resistance readings or erratic current draw, while mechanical faults (worn bearings, seized impeller, damaged seals) present as grinding, humming without rotation, overheating, or fluid leakage. Practical tests include measuring winding continuity and motor current under load with a clamp meter, manually checking shaft play and impeller free-run when the unit is removed, and visually inspecting for debris or corrosion at the impeller and seal lip. Such as, a motor that hums but does not turn often indicates a seized bearing or jammed impeller; a motor that draws excessive current and trips a breaker points toward winding insulation breakdown or mechanical binding and should be isolated and replaced if limits are exceeded.
- Humming sound with no rotation – likely seized bearing or impeller jam
- Grinding or metallic noise – bearing wear or debris contact
- Intermittent operation – loose connector, intermittent winding contact
- High current draw/tripping breaker - winding short or mechanical binding
- Visible leakage - seal failure allowing water into motor housing
| Item | description |
|---|---|
| Diagnostic test | Measure winding resistance and running current; inspect shaft play and impeller clearance |
Replacement Considerations, Mounting, Electrical Connections and Sealing Procedure for W11087376 Whirlpool PUMP&MOTOR OEM
The W11087376 Whirlpool PUMP&MOTOR OEM is an integrated drain-pump and motor assembly that must be evaluated for mechanical and electrical compatibility before replacement. Confirm the exact part number and compare the pump housing flange, mounting hole pattern, impeller clearance and electrical connector style to the original unit; similar-looking pumps can have different shaft lengths, seal arrangements or connector pinouts that will affect fit and function. inspect the motor nameplate for rated voltage and motor current, and examine the old unit for typical failure modes – bearing wear, impeller damage, or a failed mechanical seal – so you can address root causes rather than reinstalling a part into a compromised housing or misaligned mounting surface.
Mounting and sealing require clean mating surfaces and controlled torque on fasteners to maintain alignment and prevent leaks: remove old gasket material, seat any new o-ring or gasket evenly, and tighten mounting hardware in a star pattern to the manufacturer’s torque range to avoid warping the pump housing. For electrical connections, match terminals to the motor nameplate and use secure, insulated connectors with a dedicated equipment ground; verify continuity and supply voltage before energizing. After installation, perform a functional leak and performance test by filling and cycling the drain to observe flow, noise, vibration and motor current against nameplate values; if the pump shows excessive current or unusual vibration, shut down and re-check mounting alignment, impeller clearance and sealing surfaces.
- Verify part number and physical fit (flange, shaft length, connector) before installation.
- Clean mating surfaces, install new gasket or o-ring, and torque mounting bolts in a star pattern.
- Match motor terminals to nameplate, secure ground, and use proper insulated connectors and strain relief.
- Run a short fill/drain cycle to check for leaks, abnormal noise, vibration, and correct motor current.
| Item | Description |
|---|---|
| Compatibility check | Compare mounting pattern, shaft/impeller clearance and electrical connector to the original assembly. |
| Sealing | Replace gaskets/o-rings and seat mating faces; use manufacturer-approved sealant only if specified. |
| Electrical | Verify voltage and terminal assignment on the motor nameplate; attach a dedicated safety ground. |
| Verification | Perform leak and performance tests: observe flow,noise,vibration and motor current. |
Q&A
What is the W11087376 pump & motor assembly?
W11087376 is an OEM drain pump and motor assembly used on a number of Whirlpool-family washing machines (and some machines sold under Kenmore/maytag brands). It combines the electric motor and the pump/impeller housing into a single replaceable unit. Always verify compatibility by checking your washer’s model number against the part listing before buying.
What symptoms indicate the W11087376 pump/motor is failing?
Common symptoms include: washer won’t drain or drains slowly, loud grinding or rattling noises during drain, motor humming without spinning, water leaking from the pump area, or drain-related fault messages on the washer. These signs can point to a clogged,jammed,mechanically failed or electrically failed pump.
How can I test the W11087376 to determine whether it’s bad?
Start with basic checks: disconnect power, remove the access panel and visually inspect for debris or foreign objects in the impeller and drain hoses. Manually try to turn the impeller – it should rotate freely. With power disconnected use a multimeter to check for continuity across the motor terminals (an open circuit indicates a failed motor). If you are agreeable and experienced, you can measure voltage at the pump during a drain cycle to confirm the control board is supplying power; otherwise have a technician do voltage tests. Always disconnect power before any inspection or continuity test.
Can I replace W11087376 myself and what tools/steps are required?
Yes,many technicians and handy owners can replace this part. Basic steps: unplug the washer, turn off water and remove standing water, remove the appropriate access panel (front or back depending on model), disconnect the pump wiring harness and drain hoses (have a bucket/towels ready), remove mounting screws/clips and remove the old pump, fit the new pump, reconnect hoses and wiring, and test with a short drain cycle.Typical tools: screwdrivers, nut drivers or socket set, pliers, bucket, and towels. Follow your washer’s model-specific service instructions and safety precautions.
My washer motor hums during drain but the pump doesn’t turn - is the pump defective?
A humming sound while the pump doesn’t turn frequently enough indicates the motor is receiving power but the impeller is jammed or the motor is seizing. It can also indicate a failed motor winding. Before replacing the pump, check for obstructions in the impeller and drain hose and try to spin the impeller manually. If it remains stuck or the motor shows no continuity, replace the pump. If the pump is fine, the issue could be intermittent power from the control board or wiring.
are aftermarket replacements a good option compared with the OEM W11087376?
Aftermarket pumps can be less expensive and some fit and work well, but OEM parts are made to original specifications, offer guaranteed fitment, and often carry the manufacturer’s warranty. If you choose an aftermarket unit, verify physical dimensions, mounting points, electrical connector compatibility and warranty coverage to avoid fitment or performance issues.
Where can I buy W11087376 and how much should I expect to pay?
You can buy W11087376 from authorized Whirlpool parts dealers, appliance parts websites (WhirlpoolParts.com, PartSelect, RepairClinic), large online marketplaces, and some local appliance parts stores. Prices vary by seller and region; expect a pump/motor assembly to commonly fall in a moderate price range (check current listings for exact pricing). Always confirm compatibility with your washer model before purchase.
Any safety or warranty considerations before replacing the pump?
Always disconnect power to the washer before servicing to avoid electrical shock. Turn off water and drain residual water to prevent flooding. Keep track of any warranties: using non-authorized repair services or non-OEM parts can affect appliance warranties in some cases, so check your warranty terms. If you’re unsure about electrical testing or accessing internal components, hire a qualified appliance technician.
The Conclusion
The W11087376 Whirlpool PUMP&MOTOR OEM serves as a critical component in the washing machine’s fluid handling system, responsible for effective water circulation and drainage. As an original equipment manufacturer part, it is indeed engineered to meet the appliance’s factory specifications for fit, torque, and electrical characteristics, and thus plays a direct role in cycle completion, performance consistency, and operational reliability.
Accurate diagnosis is essential before replacing the pump and motor assembly: symptoms such as persistent drainage failures, unusual noises, leaks, or related error codes should be confirmed through inspection and testing to avoid unnecessary repairs. When replacement is required,using the correct OEM assembly and following proper installation procedures-or engaging a qualified technician-helps ensure safe operation,prevents collateral damage to other components,and maintains the appliance’s intended performance.
Ultimately, timely and correctly executed diagnosis and replacement of the W11087376 unit can restore functionality, reduce the likelihood of repeat failures, and contribute to longer service life and consistent washing results. Careful attention to compatibility, installation quality, and safety considerations provides the most reliable outcome for maintaining the appliance’s performance and efficiency.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
