316240600 â¤Frigidaire Ignitor Mounting âŁScrew⢠is a specific fastener used to secure an oven or range ignitor assembly to⢠the appliance chassis or burner bracket. As a mechanical â˘component, it serves to hold the ignitor â˘element or electrode in the âcorrect position relative⣠to the gas flow or heating chamber; the screw itself is selected for length, threadâ form â¤and material toâ withstand the thermal and vibrational surroundings inside a cooking appliance.
Inside the appliance the mounting screw interfaces directly with the â¤ignitor assembly and⢠the surrounding support structure, maintaining positional accuracy and, in some designs,â contributingâ to electrical grounding or strain relief for âthe ignitor lead. proper mounting keepsâ the ignitor alignedâ with the burner â˘or combustion zone so that ignition is⢠consistent and reliable; â¤conversely,a lose,corroded⣠or incorrect screwâ can allow movement,misalignment,intermittentâ electrical contact or â¤damage to the⢠ignitor and wiring during⤠thermal cycling or use.
In this article readers will⢠find âa technical overview of the 316240600 screw’s function and⢠how it relates to ignitor performance, guidance on determining âŁcompatibility with Frigidaire models and cross-reference considerations,⣠typical â¤failure symptoms that mimic ignitor faults (for example, misalignment, âstripped threads or corrosion)and practical troubleshooting andâ replacement considerations. The discussion will cover inspection points, selecting the correct replacement fastener (thread size, length⢠and material)and service considerations to restore reliable ignitor mounting without âŁoverstating procedure details or safetyâ actions.
Table of Contents
- Function and Role of the Ignitorâ Mounting Screw in Frigidaire gas Oven Ignition Systems
- How the 316240600 Frigidaire Ignitor Mounting Screw Works Inside the Appliance
- common Failureâ Symptoms â¤and Diagnostic Indicators for Ignitor âŁMounting Screw Issues
- Replacement Considerations, Compatible Appliance Modelsand Installation Procedure
- Q&A
- Wrapping Up
Function âŁand Role âof⤠the Ignitor Mounting Screw in Frigidaire âGas Oven âIgnition Systems
The 316240600 âfrigidaire âŁIgnitor Mounting Screw serves asâ the primary mechanical fastener that secures the ignitor assembly to the burner box or mounting bracket âinâ Frigidaire gas ovens. Its role is notâ only to holdâ the⤠ignitor⢠in the correct position relative to the gas orifice and flame sensor, âŁbut also to maintain stable alignment under thermalâ cycling andâ vibration so the ignitor can â˘reliably reach ignition temperature and permit consistent flame sensing. Because the ignitor element and its ceramic or âglass substrate are brittle, the mountingâ screw must provide âsecure â¤clamping âŁwithout inducing stress concentrations; technicians commonly replace this part if â˘threads are stripped, the screw is corrodedor the installed fastener is too long or âtoo short toâ seat theâ ignitor properly.
From a compatibility and service perspective,⤠the mounting screw should match the original fastener’s length, head styleand thread engagement to avoid movement or mechanical damage to âthe âŁignitor during operation. Practical inspection includes checking⢠forâ loose or⤠missing screws, evidence of mechanical cracking at the ignitor baseand corrosion that can impede secure âŁfastening; symptoms â˘that point to mounting-screw related â¤problems include â˘intermittent ignition, misaligned flameorâ repeated ignitor breakage after installation.⤠For routine replacement and troubleshooting, secure the ignitor with⤠the correct screw and washer, tighten âŁonly until the ignitor â˘is firmly seated-do notâ overtighten-and verify that the ignitor maintains its⢠positionâ when the oven âdoor is closed andâ during a heatâ cycle.
- Common â˘symptoms: intermittent lighting, ignitor breakage, visibleâ movement of â˘ignitor when touched.
- Inspection points: thread⢠condition, screw length/head clearance, corrosionand seating against the ignitor base.
- Service tip: replace the fastener if threads are damaged or if the screw does notâ provide â˘secure, stress-free seating.
| Item | Description |
|---|---|
| Part | 316240600 Frigidaire Ignitor Mounting Screw |
| Function | Securely mounts ignitor to burner box and maintains alignment under thermal cycling |
| Material | Typically corrosion-resistant plated or stainless steel âfastener |
| Service â˘note | replace if corroded, strippedor causing stress to ignitor; âavoidâ overtightening |
How the 316240600 frigidaireâ Ignitor Mounting Screw Works Inside the Appliance
The 316240600 Frigidaire Ignitor Mounting Screw secures the oven or â˘stovetop ignitor assembly to âits bracket and maintains â˘precise alignment between the ceramic ignitor element and â¤the gas burner or burner port.By clamping theâ ignitor at a controlled point, the screw prevents movement from vibration and thermalâ cycling that would change the gap or â¤angle requiredâ for⣠consistent ignition and flame sensing.⤠In typical Frigidaire assemblies the mountingâ screw also serves as a mechanical ground point or clamp âŁfor the ignitorâ bracket,â so correct seating and corrosion resistance of the fastener are critically important for long-term reliability.
During service, technicians should treat the mountingâ screw as a precision fastener: overtightening can crack theâ brittle ceramic or âŁdistort the ignitor bracket, while a loose or stripped screw will allow misalignment and intermittentâ lighting or sensor⤠faults. Replacement with the designated 316240600 part ensures thread form,â head type and length match OEM geometry; when the exact part is unavailable, match screw thread, length and head clearance and⤠verify that the replacement does⢠not contact live electrical terminals.â Common practicalâ checks are verifying that the ignitor surface sits flushâ to its bracket, confirming no insulation is pinched under the headand performing âa light functional test after reassembly to confirmâ stable ignition timing and flameâ detection.
- function: secure â¤and align âŁignitor to â˘burner/bracket⤠under thermal âand vibrational âloads
- installation tip: hand-start threads,than tighten toâ hold without deforming the ignitor; avoid excessive torque
- Compatibility check: match thread size,length,and head⤠clearance to the original part
| Item | Description |
|---|---|
| Typical âlocation | Ignitor bracket on⣠oven âfloor,ceiling or burner⢠assembly depending onâ model |
| Material | Corrosion-resistant metal (OEMs âŁcommonly use stainless or plated steel) |
| Role | Maintain alignment,resist thermal cycling,prevent movement that causes ignition faults |
Common Failure Symptomsâ and Diagnostic indicators for Ignitor Mounting Screw Issues
The 316240600 Frigidaire Ignitor Mounting Screw functions as the primary mechanical⣠fastener that holds the ignitor assembly rigidly against the⢠burner bracket. Its roleâ isâ positional accuracy and vibration control: correct thread engagement,â lengthand headâ seating maintain the ignitor’s gap and clearance so the ceramic element does not contactâ other⤠metal parts or experience bending stress. Because the fastener does not carry âŁignition current, failure modes are typically mechanical (looseness, âstripped threads, âor thermal degradation of surrounding materials) rather⣠than âŁelectrical, but those mechanical failures frequently produce âŁelectrical symptoms by misaligning or fracturing âthe fragile ignitorâ element.⢠Using the correct OEM-style screw⣠or an exact-compatible replacement âŁprevents axial play and concentrated heat paths that âŁaccelerate ignitor wear.
- Visible looseness⤠or wobble of the ignitor assembly
- Discoloration, charringor melted insulation at the screw or⣠adjacent bracket
- Intermittent â¤ignition, continuous clickingor â˘delayed ignition⤠despite a glowingâ ignitor
- Stripped screw head or threads that prevent proper torque and⢠seating
- Cracks in the ceramic ignitor at the mounting point
Diagnosing mounting-screw issues requires a combined visual, âmechanicalandâ functional check: âperform a close visual⣠inspection for thermal damage and check for any axial or rotationalâ play by gently rocking âthe ignitor; any detectable movementâ identifies⣠inadequate fastening. Verify that replacement hardware âmatches⣠the original thread profile and length so theâ ignitor⢠sits at the factory-specified distance from the burner; an overlongâ or wrong-thread screw can stress the ignitor or shift its â˘position. Practical â˘troubleshooting examples include: if âthe ignitor glows but the burner fails â¤to light, confirm the screw is securing theâ ignitor⤠without cracking the ceramic; if the â¤unit clicks continuously, rule out loose mounting before replacing electronic components.when replacing âthe screw, hand-tighten to a secure fit and avoid excessive torque â¤that can fracture⢠the ignitor body.
| Item | Description |
|---|---|
| Mechanical play | Wobble or movement at the ignitor base indicates insufficient thread engagement orâ stripped threads. |
| Thermal damage | Charring or discoloration near the screw points to concentrated heat or poor contact and may indicate misalignment. |
| Functional symptom | Intermittent ignition, continuous clicking,⢠or delayed flameâ often trace âback to â˘misalignment caused by an improper or failed mounting screw. |
Replacement considerations, Compatible Appliance Modelsand Installation Procedure
The 316240600 âFrigidaire Ignitor Mounting Screw secures the oven ignitor assembly â¤to the burner box and maintains âŁalignment underâ thermal âŁcycling⢠and vibration. In practice this⤠screw â˘establishes the mechanical âground and spacing that keeps the ignitorâ element positioned relative⣠to âthe gas orifice; a loose, missing,⤠or incorrect-length screw can allow theâ ignitor to shift, causing intermittent ignition, extended â˘glow⤠time, âŁor premature element failure. â¤Technicians should treat this asâ a precision replacement part rather â˘than a generic âfastener: fit, thread form, â¤and overall length affect how the â˘ignitor mates to the mounting boss and how heat transfers â¤away from the element mounting plane, which in turn âinfluences ignition reliability across compatibleâ Frigidaire and some sister-brand gas ranges and ovens.
When replacing the screw, verify mating-hole condition and wire routing beforeâ final torqueing: stripped threads in⣠the mounting boss may require a heli-coil or âboss repairand contact between the screw head and ignitor leads can abrade insulation.â Follow a controlled procedure that preserves component geometry and electrical isolation; use the OEM 316240600 part wereâ possible, hand-start âŁthreads to avoid cross-threadingand tightenâ to a firm, snug engagement rather than âexcessive force to prevent cracking the â˘ignitor base. After installation, verify ignitor gap, secure wiring away from the screw head,⢠restore powerand observe âseveral start cycles to confirm consistent glow time and successful ignition.
- Power off and disconnect appliance â¤before service.
- Remove access panel and visually inspect ignitor mounting bossâ and⤠wires.
- Remove old screw, check thread integrity, hand-start replacement screw.
- snug screw to firm engagement; avoid overtightening and verify ignitor position.
- Reassemble âŁpanels, restore powerand runâ multiple âŁignition cycles to test.
| Item | description |
|---|---|
| 316240600 Frigidaire Ignitor âMounting Screw | OEM mounting fastener for ignitor assemblies; maintains alignment and mechanical stability. |
Q&A
What is the 316240600 Frigidaire ignitor mounting screw used for?
The â¤316240600 âis an OEM replacement screw used âŁtoâ secure theâ ignitorâ assembly⤠(hot⤠surface ignitor or⢠spark module mounting bracket) â˘in certain⤠Frigidaire/Frigidaire Gallery ovens and ranges. It provides theâ mechanical âattachment for the ignitor so itâ sits correctlyâ relative to the burner or gas valve.
How can I confirm this screw â¤is the⤠right part for my⢠oven model?
Verify compatibility by checking your appliance model numberâ (usually on a sticker inside the⢠oven frame, oven dooror âback panel) against the Frigidaire partsâ list or the parts seller’s compatibility chart. You can also remove the existing⢠screw and compare head style, threadâ pitch,â diameter and length to ensure a â˘match before â˘ordering a replacement.
What screwdriver or toolâ do⤠I need to install⣠or removeâ the 316240600 screw?
Use the driver that matches the screw head â¤(commonly a Phillips â˘orâ a small hex/hex-washer head on oven hardware). Alwaysâ use â¤a âŁcorrectly â˘sized bit to avoid stripping. If⤠the âscrew⢠is seized, apply penetrating oil⣠and allow time to soak before attempting removal with âŁsteady, even pressure.
Are âŁthere specific installation or safety steps I should follow when replacing the ignitor mounting screw?
Yes-turn off power to âthe appliance at the⢠breaker and, forâ gas ovens, turn off the gas supply beforeâ working. Handle the ignitor element carefully (it is brittle) and avoid âflexing the ceramic. Seat âŁthe screw straight in the hole to avoid cross-threading. tighten until snug and then give⣠a smallâ additional turn-do not overtighten, which could crack the ignitor or strip⣠the threads.
Can I use a generic screw instead of the 316240600 OEM screw?
A generic screw can be used only if it exactly matches the OEM’s thread size, pitch, length and head style â˘and is⤠made of â˘a suitable material (stainless or similarly corrosion-resistant metal). Avoid usingâ a screw that’s too long, has the wrong thread formor is made of a material that could corrode â˘under high⤠heat. When in doubt,â use the OEM part.
What material should the replacement screw be⣠made of for durability in âan oven environment?
stainless steel or another corrosion-resistant â˘metal is⤠recommended as oven compartments are exposed to heat â¤and occasional moisture.These materialsâ resist rustingâ and will last longer â˘than plain steel in⤠the high-temperature environment of an oven.
How tight should the ignitor mounting screw be? Is âthere a torque specification?
There is generally no high torque âŁrequirement-tighten the screw until the ignitorâ is securely⣠held and does not move,then add âa âŁsmall additional turn. Excessive torqueâ can crack the ignitor or strip the mounting threads.If you⣠prefer a⢠numeric âguideline, many small appliance screws⢠are tightened to a low torque⣠range (roughly single-digit to lowâ double-digit inch-pounds), but the safe practice is âsnug plus a fractional turn.â
What if the screw or mounting hole is stripped or corroded-what are myâ repair options?
If the screw hole is stripped, options include replacing the screw with the correct-size â˘OEM fastener and using a slightly larger/helical insert âŁ(e.g.,a small nut,insert or helicoil) designed for the material,or repairing theâ mounting bracket. If the screw is corrodedâ and stuck, apply penetrating â˘oil, waitand then remove with the⢠correct driver; heat can help but use caution.⢠If the bracket âitself is damaged or corroded, replacing the bracket or assembly with OEM parts is frequently enoughâ the most reliable long-term⢠fix.
Wrapping⤠Up
The⣠316240600 Frigidaire ignitor mounting screw plays aâ small but essential role in⢠safe and reliable appliance⢠operation by securing⤠the ignitor assembly in the correct position. Properâ mounting âpreserves alignment,â minimizes vibration and electrical stressand helps ensure consistent⢠ignition performance. Whenâ theâ screw âis damaged, looseor missing, the⤠ignitor can become misaligned or unstable, which may lead to intermittent ignition, extended bake times, â¤or component wear.
Because symptoms â˘of ignitor⤠or mounting failure can mimic other faults, accurate diagnosis is âimportant before replacing components. Visual inspection,functional testing,and consultation ofâ the appliance manual or a qualified service technician can â¤confirm whether the mounting screw or another part is the source of the problem. When replacement is âneeded, using the correct⣠OEM part and havingâ the repair performed⣠or reviewed by⤠a trained âprofessional helps maintain âsafety, reliabilityand the âintended performance of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
