39893â Speed Queen Washer Drain Hose-DDP High Flex is a flexible discharge⣠hose â˘assembly âmanufactured for speed Queen washing machines. It is a serviceable plumbing componentâ that âprovides the⤠conduit for wastewater leavingâ the washer tub âand drain pump; âŁthe âDDPâ High âFlexâ designation identifiesâ a highâflex⤠constructionâ intended⤠to⣠resist ârepeated bending and kinking during installation and operation.
Inside⣠the appliance, âthis â˘drain hose âŁconnects the drain â¤pump outlet to â˘the household âdrain, standpipe or building waste system and interfaces directly â¤with the washer’s⢠tub, pump flange, clamping hardware and external drain fitting. Its functional requirementsâ includeâ maintaining an⣠unobstructed â˘internal diameter under mechanical stress, resisting exposureâ to hot⤠water and detergent⢠chemicals,⣠and⤠preserving proper routing to preventâ backflow or siphoningâ that can affect pump load,â drain âŁperformance âand cycle âcompletion.
In the following âarticle you will find â¤a technical â˘explanation⢠of the hose’s âfunctionâ and typical installation locations,⤠guidance on part compatibility âŁand selection, common failure âsymptoms (suchâ as⣠slow draining, gurgling, â˘leaks or⢠residual⢠water), stepâbyâstep troubleshooting checks to âŁisolate hose versus pump or⤠plumbing âŁfaultsand⣠practical⣠replacement⢠considerations such as correct length, internal diameter,â connector type, secure clamping and safe service practices (power and â¤water isolation). â¤This information is intendedâ to helpâ technicians, âengineers and appliance owners âassess, diagnose and replace âŁthe drain hose âcorrectly and reliably.
Table âof Contents
- Function and Role of the Washer Drain Hose âin Water Removal and System Pressure â¤Management
- How⢠the 39893â Speed Queen Washer Drain Hose-DDP⤠High âFlex Operates⣠Within the Pump â˘and â˘Drain Assembly
- Common failure âSymptoms and Diagnostic Tests for Leak,Blockage,and Hoseâ Degradation
- Compatibility,Replacement⤠Considerations,and Installationâ Procedures for the 39893 âDrain Hose in Supported Speed Queen Models
- Q&A
- Key Takeaways
Function and âRoleâ of the Washer Drain Hose âin â˘Water Removal and System Pressure Management
The 39893 Speed Queen â¤Washer Drain Hose-DDP Highâ Flex serves as the primary wastewater conduit between the washer pump and the household drain,engineered to preserve pump flow and control transient pressure events during the drain cycle. Itsâ high-flex elastomer construction and âŁsmooth internal â¤bore âminimize kinking, compressionandâ turbulence that would otherwise âelevate backpressure⢠on the pump and disturb⢠cycle timing. Correct interface geometry (inner diameter, length,⢠andâ outletâ fitting type) is necessary to⣠maintain a sealed connection and to prevent air â¤ingress or siphoning that can alter measured â˘system pressure and⤠trigger diagnosticâ alarms â˘on modern âcontrollers.
Restricted flow, sharp bendsorâ a partially collapsed âsection âof the âhose raises the hydraulic head âagainst the pump⤠and increases motor â˘current draw, âproducing symptoms such as â˘slow drain, elongated⢠drain â˘steps, noisyâ operationor â˘overcurrent trips. Practical troubleshootingâ includes verifying hose routing to avoid⢠low spots thatâ trap water, confirming⢠the hose⤠terminates⤠to the âstandpipe at the manufacturer-recommended height,⣠and ensuring clamps â¤orâ push-fit connections are secure. âWhen⢠replacing a damaged hose,match the 39893⣠Speed Queen Washer Drain Hose-DDP High Flex toâ the washer’s required âID andâ fitting style; cleaning or replacing the hose typically restores expected pump âpressure âŁand⣠drain⣠performance.
- Features: high-flex material, smooth⢠bore for consistent⤠flow, OEM-compatible fittings
- Behavior: resists âkinking under ârepeated â˘motion, reduces pump backpressure when properly⢠routed
- Practical âchecks: âinspect for crimps,⢠measure ID/length, âsecure clamps at âŁpump⢠outlet
| Item | Description |
|---|---|
| Typical properties | High-flexâ thermoplastic elastomer; smooth internal bore â¤to preserve flow and reduce âturbulence;⤠available in OEM-compatible âlengths and fittings-confirm exact ID and coupling type for your model. |
How the â39893 Speed âQueen Washer Drain âŁHose-DDP High Flex Operates Within â¤the Pump and Drain Assembly
The 39893 Speed â¤Queen âŁWasher Drain Hose-DDPâ High Flex functions as theâ flexible discharge conduitâ between the⢠washer’s drain pumpâ outlet and⣠the household drain, â˘carryingâ the pump’s intermittent high-flow pulses while maintaining aâ sealed path. âitsâ high-flex polymer constructionâ permitsâ tight routing through theâ pump and cabinet area without â˘transmitting excessive vibration to theâ pump housing;â the hose⢠mounts to â¤the pumpâ via a barbed discharge âand isâ secured âwith⣠a clamp, so properâ seating on theâ barb and â˘correct clamp torque â are required to prevent â˘leaks underâ pressure cycling.
Withinâ the pumpâ and⣠drain assembly the hose reduces â¤strain atâ theâ pump outlet,â accommodates minor misalignmentâ between the pump and cabinet exitand⣠helps prevent â˘kinking when routed around internal components. âCompatibility depends on matching the OEM barb diameter and connector style-using â¤an undersized or overly long replacement â˘can introduce stress points that produce â¤cracks or restricted flow. Practical examples: âa hose routed tightly over a sharp cabinet edge can develop a crush point that slows draining, while â¤a⢠clamp that ridesâ off the barb⢠will⣠allowâ pressure-driven âleakage duringâ the pump’s discharge⢠cycle.
- Functional characteristics: flexible, smooth-bore flow path, âŁresists moderate bending without âcollapse
- Installation considerations: âŁmatch barbâ diameter and length, seat hose fullyâ on the barb, use â˘an appropriate clamp type
- Common symptoms of failure: leaks atâ the clamp, hairline cracks near tight bends, reduced flow from pinched â¤routing
| Item | Description |
|---|---|
| Material | High-flex elastomer with chemical âresistance to detergents and temperature âcycling |
| Connection | barbed⤠pump discharge; â¤securedâ with âworm-gear or crimp clamp |
| service guidance | Replace with same barbâ diameter and âŁsimilar length;â inspect routing for kinks and clamp seating during service |
Common Failure⢠Symptoms and Diagnostic Tests âfor Leak, Blockageand Hose Degradation
The drain hose is the last fluid conduit betweenâ the washer pump and the household âdrain, carrying the entire pump âdischarge âincluding loose lint,⤠soapy water andâ heavierâ particulates. The 39893 Speed Queen Washer Drain Hose-DDPâ High Flex is a flexibleâ discharge hose designed to reduce stress âatâ the pump outlet and to accommodate tight installation paths; though,flexibility can â˘mask⤠collapsed segments or internal abrasion that reduceâ flow. Common âmechanical⣠failure⣠modes âare external splits at clampâ locations,â materialâ embrittlement fromâ heat or chemicals, inner-liner collapse from suction or âŁkinking,â and⣠partial blockage⣠from accumulated debris. Compatibility depends on âinner diameter, fitting style and length-using a â˘hose with a mismatched ID or âincompatible barb⢠fitting⢠can cause poor pump performance or siphoning during fill cycles, so âconfirm fit with âthe washer pump outlet and drain connection before reuse.
Diagnosing leaks, blockages and hose degradation requires a combination of static visual inspectionâ and dynamic flow testing. Start â¤with a âthorough visual inspection for cracks, soft⢠spotsor crushed sections and â¤verify âclamps âand barb fittings are tight and âseated;â than perform a flow âtest by⣠directing the pump discharge⣠into a bucket or by backflushing the hose to verify unobstructed flow and to dislodgeâ trapped â˘debris.For suspected internalâ collapse, pinch the hose while â˘pressurizing itâ with a garden hose or observe âflow â˘whileâ the washer drains; loss of âŁfull-diameter⢠opening⤠under slight compression indicates permanent⢠deformation andâ replacement. Use a â˘wet/dry vacuum⤠or a plumber’s snakeâ to confirm and clear partial blockages,â and⢠inspect the hose during â˘an actual drain⢠cycle to catch intermittent⣠leaks or hose movement that âmay abrade the material against chassis edges.
- Slow or incomplete draining -⤠check⤠for partial blockage,collapsed liner,or pump âŁobstruction.
- Visible leak⤠at clamp⢠– inspect⢠clampâ torque and â¤seating; replace gasket â˘or âhose end â˘if damaged.
- Intermittent drainage or gurgling – test for siphoning dueâ to incorrect hose height â˘or ID.
- Cracks or brittle sections â- replace hose; temporary patching is not⤠a long-term fix.
| Item | Description |
|---|---|
| Visual inspection | Look â˘forâ cracks, abrasions, crushed âsectionsand secure clamping âatâ pump âŁand â¤drain connections. |
| Flow test | Run pump discharge into aâ container or backflush⤠to verify âsteady,full-diameter flow and to âŁlocate restrictions. |
| Pinch/compression check | Compressâ hose while â¤pressurizing; â˘permanent deformation under light compression âindicates⢠collapseâ and need âfor replacement. |
| Operational observation | Monitor an⢠entire drain cycle to detect intermittent âleaks, siphon behavior, âor hose movement causing abrasion. |
Compatibility, Replacement Considerationsandâ Installation Procedures for the 39893 Drain Hose in â˘Supported Speedâ Queen⣠Models
the 39893⤠Speed Queen Washer Drain Hose-DDP High Flex is âŁa replacement discharge hose âdesigned to carry the âwasher pump’s âoutflow to a⣠standpipeâ or household drain. The DDPâ high-flexâ construction resists kinking and temporary âcollapse under suction âŁpulses âfrom the drain â˘pump, maintaining consistent flow ârates during high-volume âdrain cycles. The hose terminates in standard pump-barb or clamp-ready ends and is intended for Speed Queen machines that âaccept a âŁflexible hose replacement; verify that the hose⣠length, ârouting⣠pathand end-fitting style âmatch the serviceâ manual or the âoriginalâ equipment before installing.
replacement and installation focus on preserving pump outlet â¤alignment, sealing integrityand â˘unobstructed flow. typical service âpractice includes isolating power and â˘water, drainingâ residual⤠water from⢠the tub, removing the â¤old hose atâ the pump and drain connectionandâ fitting â˘the⢠newâ hose with an âappropriate clamp⢠or quick-connect. Secure routing to avoid abrasion, excessive bending,⢠heat sourcesor contact with⢠moving suspension parts; improper routing or undersized⣠clamps can cause leaks or premature⤠hose wear. After installation, run a⤠drain-only or short wash cycle while observing for leaks⤠and verifying âŁthat theâ hose remains free of kinks and retains â˘its full internal diameter âunder pump discharge.
- Power and⤠water âoff: disconnect power and shut off water before service.
- Confirm fitment: compare end âfittings and hose length âto the original hose or âservice diagram.
- Remove old hose,⣠inspectâ pump outlet and â¤clamp seating surfaces⤠for damageâ or burrs.
- Install new hose, position clamps correctlyand maintain smooth radii in routing.
- Test: run a âdrain cycle and inspect forâ flow restrictions,⤠leaks, âor movement.
| Item | Description |
|---|---|
| part | 39893 Speed Queen Washer âŁDrain Hose-DDPâ High â˘Flex |
| Construction | DDP high-flex polymer designed for repeated flexing and crush resistance |
| Intended⣠fit | Speed Queen models that accept clamp- or⤠barb-style pump discharge⢠hoses; confirm end style and âŁlength |
| Installation checks | Verify clamp type and torque, maintain bend radius, avoid â˘heat and âabrasion, perform a drain test |
Q&A
What is the 39893 Speed Queen Washer âŁDrain Hose – DDP High Flex and⢠what does “High Flex”â mean?
The 39893 is â¤a replacement drain hose sold for Speed Queen âŁwashers. “High Flex” âindicates the hose material⤠and construction are designed⤠to be moreâ flexibleâ and resistant âto kinking and âfatigue compared with a stiffer, standard drain hose. That flexibility makes â˘routing easierâ during installation and reduces stress at connection â˘points that can cause leaks over time.
How do Iâ confirm this⣠hose fits⤠my Speed Queen washer?
Confirm fit âby matching the âŁpart number (39893) with your washer’s partsâ list or owner’s manualor by checking Speedâ queen’s official parts lookup using your model and serial number. If âyou purchase from â˘a parts dealer, provide the washer âmodel to verify compatibility. avoid assuming fit âsolely âŁbecause it is labeled “Speed Queen”-someâ models âuse different hose ends or lengths.
How do I install â¤the 39893 drainâ hose safely?
Unplug the washer and, âif applicable, âŁturn offâ water supply. Remove any panels⣠required to access the âdrain connection â(consult the âservice manual).â Loosen theâ clamp on⤠the â˘old hose, detach it from the pump outlet,⤠then attach the new hose fully onto⣠the pump barb âŁor drain fitting and secure âit with â¤a corrosion-resistant worm-gear (stainless steel) clamp.â Route the hose âwithout tight bends or âkinks, secure itâ with â¤clips orâ zip ties to prevent vibrationand reconnect any chassis panels. Run a short âtest cycle and check for leaks.
What tools⤠and âsupplies âwill⤠I need to replace â˘the hose?
Typical tools: screwdriver or⢠nut driverâ for hose clamps, pliers, â˘work glovesand possibly a socket set to⤠remove access panels. Supplies:â the replacement â39893 âhose, one or two stainless-steelâ worm-gear hose clamps sized for theâ hose diameterandâ zipâ ties or mounting clips to secure the hose. Have a towel or âsmall bucket â˘handy to catch anyâ residual water.
Can I shorten the hose if it’s too long,and is â˘it safe⤠to use after shortening?
You⤠can⢠shorten⢠the âhose if necessary,but make a clean,squareâ cut and ensure the⤠remaining âhose slips â˘fully ontoâ the âpump or drain fitting with a proper clamp securing it. Excessively shortening a â˘hose can place â¤the â¤fittings too close toâ moving parts or create⢠stress points; always⣠leave⤠enough length for âŁsmooth routing and to â¤prevent tension when the washer â˘moves⤠slightly during spin cycles.
What âare common reasons this âŁdrain hose âwould leak âor⣠fail?
Common causes are â¤improper seating onâ the pump âŁor drain fitting, loose or corroded clamps, â¤kinks or crush⤠damage in⢠theâ hose, â¤abrasion against sharp edges, âor internal degradation fromâ age/chemicals. âLeaksâ can â¤also occur where⣠the hose âŁconnects â¤to a standpipeâ or utility sink if not properly⢠secured.Inspect both ends and the full â¤length of the hose âŁfor cuts, soft spotsor collapsed sections.
How â¤do I clean or maintain the drain âhose to prevent clogs and odors?
To âreduceâ clogs and odors periodically⤠run âa maintenanceâ cycle with âan appropriate washing machine cleaner âor a diluted⣠vinegar âŁsolution âperâ the washer manufacturer’s guidance. Ifâ accessible, disconnect the hoseâ and flush it withâ water⤠to remove obstructions. Avoid âharsh solvents âŁthat can damage the hose material.⤠Check the hose and clamps for wear â˘during any maintenance and âreplace the hoseâ if you find hardening,â cracking, âŁor bulging.
Is the âŁ39893 âan OEM part â¤and are there acceptable aftermarket⤠alternatives?
Speed âQueen-branded 39893 hoses are OEM⢠replacements; OEM parts ensure correct⢠fit and material specificationsâ for â˘Speed Queen âwashers.Aftermarket hoses might potentially be available and â¤can be âacceptable if they match the âŁcorrect⢠part number, dimensionsand âconnectionâ types. when choosing an aftermarket option, verify â˘material âŁcompatibility, clamp size, âand flexibilityandâ prefer reputable â¤manufacturers with return policies in case of fitment issues.
Key Takeaways
The 39893 Speed âŁQueen Washer⣠Drain Hose-DDP High Flex â¤plays a essential â¤role in â˘channeling wastewater âsafely and efficiently away from the âwasher⤠tub. âIts high-flex âdesign and compatible fitâ help⣠maintainâ proper drainage⢠performance, reduce stress from repeated movementand minimize the risk of leaksâ or kinks that can impair operation or⤠cause water damage.
Timely and â¤accurate diagnosis of drain-hose⣠issues is essential: visible cracks, â¤bulging, persistent leaksor slow draining are clearâ indicators that inspection and corrective action are required. When replacement⢠is necessary, using a correctly specified hose and confirmingâ secure connections and routing are â¤importent steps to restore reliable âŁoperation âand avoidâ recurring problems.
Maintaining theâ drain hose as part of routine washer service⤠supports long-term performance â˘and âŁsafety.⣠When in doubt about compatibility, installationor the extent of damage, âconsult â˘equipment documentation or seek professional â˘assistance to ensure the replacement is performedâ correctly andâ theâ appliance returnsâ to safe, effective⢠operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
