241734001 Frigidaire Refrigerator Ice Bucket is a replacement ice storage assembly designed for select Frigidaire freezer compartments; it is indeed a molded ice bin that receives, contains and meters ice produced by the refrigerator’s automatic ice maker. As a discrete mechanical component, the ice bucket typically comprises a food‑grade plastic receptacle shaped to interface with the ice maker output, any associated chute or dispenser mechanismand the freezer shelf or cabinet mounting points.
Within the appliance the ice bucket functions as the immediate storage and dispensing interface between the ice maker and the user or dispenser system.It interacts directly with the ice maker’s harvest cycle and auger or paddle mechanism where present, aligns with the dispenser chute or door opening, and frequently enough houses or positions level indicators and guides that prevent ice bridging. Installed in the freezer compartment beneath or adjacent to the ice maker module, the bucket contributes to reliable ice flow, minimizes ice packing and frost accumulation in the dispenser path, and preserves hygienic separation between produced ice and the surrounding cabinet habitat.
In this article readers will find a technical overview of the ice bucket’s function and design features, guidance on model compatibility and how to confirm that 241734001 is the correct part for a given refrigerator, common failure symptoms (cracks, misalignment, ice jamming, level switch faults)and step‑wise troubleshooting checks to isolate bucket‑related issues. The piece also covers practical replacement considerations, including inspection points, required tools and fastenersorientation and seating requirementsand safety precautions to take before removal and installation.
Table of Contents
- Function and Role of the Ice Bucket Assembly in Ice Production, Storageand Dispensing
- How the 241734001 frigidaire Refrigerator Ice Bucket Integrates with the Ice Maker, Sensorsand dispenser Mechanisms
- Common failure Symptoms and Diagnostic Indicators for Ice Bucket Jamming, Breakageand Seal Degradation
- Replacement Considerations and Step‑by‑Step Installation procedures for the Ice Bucket Assembly
- Q&A
- To Wrap It Up
Function and Role of the Ice Bucket Assembly in Ice Production, Storageand Dispensing
The 241734001 Frigidaire Refrigerator Ice Bucket serves as the intermediate storage and mechanical interface between the ice maker’s harvest cycle and the dispenser/auger that delivers ice to the user. Functionally, the bucket collects cubes or flakes after the ice maker releases them, provides a controlled-volume buffer to prevent backflow into the maker, and presents the ice to the auger or dispensing mechanism via a molded feed well and sloped floor. Its geometry-ramped walls, ribbed surfacesand a specific feed pocket-directs cubes toward the dispenser and reduces bridging; the part’s mounting tabs, sensor notchesand engagement points are designed to match Frigidaire actuator arms and optical or mechanical level sensors so that harvest cycles and dispense motors operate in correct sequence. Using the correct bucket ensures proper alignment of the sensor and auger; an incorrect or aftermarket bucket can cause misreads, jamsor premature wear of the dispensing components.
In operation the bucket behaves as both a passive container and an active component of the ice delivery system: its material properties (rigid food-grade polymer) minimize thermal conduction that would accelerate melting,while the internal contours reduce cube interlock and sticking.Typical failure modes that affect ice production and dispensing include cracked walls or warped mounting surfaces (leading to leaks or misalignment), clogged feed pockets from refrozen slushand damaged sensor notches that produce false “full”/“empty” signals. Practical service examples: if ice does not dispense, check bucket engagement and auger clearance first; if the ice maker fails to harvest, inspect the sensor notch and mounting clips. Key features and interfaces are summarized below.
- Capacity and geometry: defines buffer volume and feed profile for the dispenser.
- Mounting interface: tabs, clips, and stops that align with the ice maker and door assembly.
- Sensor compatibility: notches or windows for optical/level switches to detect ice quantity.
- Material and finish: low-friction surfaces and rigid polymer to limit sticking and deformation.
| Item | Description |
|---|---|
| Capacity | Holds the manufacturer-specified number of ice cubes to balance production and dispense cycles. |
| Mounting | Specific peg and clip arrangement for Frigidaire models to ensure correct auger and sensor alignment. |
| Sensor interface | notch or window that accommodates optical or mechanical level sensors used by the refrigerator control board. |
How the 241734001 Frigidaire Refrigerator Ice Bucket Integrates with the Ice Maker, Sensorsand Dispenser Mechanisms
The 241734001 Frigidaire Refrigerator ice Bucket functions as the mechanical and sensor interface between the ice maker’s harvest cycle and the dispenser mechanism. It provides the receptacle for cubes released during the harvest, aligns with the auger or dispensing chuteand incorporates molded features that engage the ice maker’s ejector and the refrigerator’s ice-level sensing system. Proper alignment of the bucket’s mounting tabs and the auger coupling is critical: misalignment can prevent the auger from engaging, allow cubes to jam at the chuteor cause the ice-level sensor (mechanical bail arm, optical windowor magnetic/reed switch) to register an incorrect ”full” condition. Such as,a cracked retainer tab or a deformed sensor notch will frequently present as repeated harvest cycles with no ice delivered to the door dispenser,or as the dispenser motor running but turning freely because the auger spline is not engaged with the bucket coupling.
- Physical interfaces: mounting tabs, auger coupling, chute alignment
- Sensor interfaces: locations for mechanical bail arm, optical windowsor magnet pockets
- Common failure modes: broken tabs, frost/ice accumulation, sensor misreads, auger disengagement
| Item | Description |
|---|---|
| Mounting tabs | Locate and secure the bucket to the freezer liner; wear here causes misalignment |
| Sensor interface | Notch or window where the refrigerator’s level sensor contacts or views the ice level |
| Auger coupling | splined receptacle that must engage the dispenser motor shaft to rotate ice toward the door |
Technicians diagnosing delivery or sensing issues should inspect the bucket for dimensional integrity, check that the auger spline and chute are free of obstructionsand verify sensor operation by removing the bucket to observe the ice maker and sensor actuator movement directly. Compatibility is determined by the bucket’s molded geometry and sensor cutouts; replacement buckets manufactured to OEM specifications will match the location and shape of tabs and sensor features, while generic buckets can fail to engage sensors or augers correctly. Practical maintenance steps include clearing compacted ice from the bucket and chute, replacing damaged mounting tabs to restore alignment, and using a multimeter to test continuity or switching action on the associated sensor while exercising the ice maker and dispenser.
Common Failure Symptoms and Diagnostic Indicators for Ice Bucket Jamming, Breakageand Seal Degradation
The 241734001 Frigidaire refrigerator Ice bucket is a molded storage and dispensing interface that transfers ice from the freezer bin to the dispenser; it must align with the auger drive, mounting tabs, and discharge seal to function correctly. Common mechanical failures manifest as bucket jamming (binding against the housing or auger), structural breakage (cracked or sheared mounting tabs or bucket wall), and seal degradation (compression set, tearsor loss of elasticity at the discharge lip). These faults change the relative geometry between the bucket, augerand door seal so that the auger either stalls, grinds, or allows ice and meltwater to bypass the discharge path. Practical examples include a dropped bucket that fractures a drive tab and causes intermittent rotationor long-term exposure to low temperatures that embrittles the rubber seal and produces water leakage and excessive frost downstream of the dispenser chute.
- Bucket resists manual rotation or produces grinding/scraping noises during dispense cycles.
- Visible cracks or missing material at drive coupling, mounting tabsor bearing surfaces.
- Pooling of water under the bucket, frost accumulation at the dischargeor ice clumping indicating seal failure.
- Excessive radial or axial play between bucket and housing suggesting wear or deformation.
- Dispenser motor stalls or shows elevated current draw under normal load, indicating mechanical binding.
effective diagnosis combines a targeted visual inspection with simple mechanical checks: remove the bucket and inspect the drive coupling and mounting tabs for wear or fractures, measure radial clearance with calipers to detect deformation, and flex the discharge lip to assess seal elasticity and tear propagation.If the bucket structure is compromised (cracked tabs or warped shell) replacement of the complete 241734001 assembly is the reliable corrective action as restoration of the original mounting geometry is required; if the shell is intact but the seal shows compression set or tearing,replace the seal or the assembly depending on parts availability. After repair or replacement, verify free rotation under load, confirm the dispenser door and seal engage without gapsand run multiple dispense cycles to confirm absence of leaks and normal motor current draw.
| Item | Description |
|---|---|
| Drive coupling wear | Rounded or fractured coupling tabs cause slippage, grindingor intermittent rotation under load. |
| Seal compression set | Flattened or torn discharge lip permits meltwater bypass and frost, reducing dispensing reliability. |
replacement Considerations and Step‑by‑Step Installation Procedures for the Ice Bucket Assembly
The 241734001 Frigidaire Refrigerator Ice Bucket functions as the primary storage and feed interface between the automatic ice maker and the dispenser or door auger. It is an injection-molded component with molded locating tabs and a drive-coupler recess that must maintain dimensional tolerances to prevent binding or ice bridging; even small warpage or a cracked wall will change the ice flow characteristics and can cause jamming or inconsistent dispensing. Compatibility is determined by the bucket’s mounting geometry and the auger/drive interface, so verify that tab spacing and the central coupler recess match the refrigerator model before installing a replacement.
- Disconnect refrigerator power and disable the ice maker before begining work.
- remove the door or freezer shelf obstructing access, then lift the old bucket straight up to disengage the locating tabs.
- Inspect the bucket mating surfaces, auger couplerand retaining clips for wear or deformation; clean any frost or debris.
- Position the replacement 241734001 bucket with the front lip aligned to the guide rails and lower until the locating tabs engage.
- Rotate the bucket slightly while seating to ensure the coupler properly mates with the auger shaft and there is free rotation.
- Restore power, run a manual dispense cycleand observe for binding, leakageor unusual noise during a few ice-dispense operations.
When replacing the ice bucket, plan to verify not only the part number but also surrounding components such as the auger, motor couplingand door seals; a defective coupling or misaligned door can produce the same symptoms as a bad bucket. If the new bucket seats but binding persists, measure tab locations and the coupler recess against the service drawing or the original part to determine whether an adjacent component or frame deformation is the root cause.
| Item | Description |
|---|---|
| Material | Injection-molded ABS with reinforced rim; susceptible to thermal stress cracking |
| Mounting features | Locating tabs, front lip guides, central coupler recess for auger engagement |
Q&A
What is part 241734001 and which refrigerators use it?
Part 241734001 is the OEM ice storage bucket (ice bin) manufactured for certain Frigidaire/Electrolux refrigerators.It is used as the removable container that collects and stores ice produced by the ice maker. It fits specific Frigidaire models – to confirm compatibility check the part number on your old bucket or use your refrigerator model number in Frigidaire’s parts lookup or an authorized parts dealer.
How do I remove and reinstall the 241734001 ice bucket?
Open the freezer door and slide the ice bucket forward until it clears the stop. Many designs have a release tab or hinge that allows the bucket to be tipped down and pulled out. When reinstalling, align the bucket on the rails or hinge pins, slide it back into place and push until it seats; you should hear or feel it engage. If your refrigerator has an auger or motor-driven dispenser, turn the dispenser/ice maker off before removing the bucket to avoid motor damage.
Can I clean the 241734001 ice bucket in the dishwasher?
Most OEM ice buckets are made of plastic that can warp or discolor in high dishwasher heat. to be safe, wash the bucket by hand with warm water and mild dish soap, rinse thoroughlyand dry entirely before returning it to service. Avoid abrasive pads, strong solvents, or bleach that can damage the plastic or leave residues that affect ice taste.
What are common signs the ice bucket (241734001) needs replacement?
Replace the bucket if you see cracks or splits that allow water/ice to escape, warping that prevents it from seating correctly, broken tabs or hinge pins so it won’t stay in placeor persistent odors/staining that can’t be cleaned. Also replace it if the bucket interferes with the auger or dispenser operation due to deformation.
Does the 241734001 include the ice maker motor or auger components?
No – the 241734001 is the ice storage bin only.It does not include the ice maker head,motor,auger,or dispenser components. If you need those partsorder them separately and verify part numbers for your specific refrigerator model.
How do I ensure proper fit when ordering a replacement 241734001?
Check the part number stamped on the old bucket when possible and confirm it matches 241734001. If you don’t have the old part, use your refrigerator’s full model number (found on the interior nameplate) on Frigidaire’s parts website or an authorized parts dealer to verify compatibility. Ordering OEM parts from Frigidaire or authorized suppliers reduces the risk of fitment issues.
Will replacing the ice bucket fix ice dispensing problems?
Sometimes – if the bucket is cracked, warpedor misaligned so the auger can’t engage or ice jams occur, replacing it can resolve dispensing issues.However, dispensing problems can also be caused by the auger motor, broken drive components, frozen clumps, or controls. Diagnose that the bucket is the source before assuming replacement will fix the problem.
Are there installation tips or safety steps I should follow when replacing the ice bucket?
Turn off the ice maker/dispenser before removing the bucket to prevent the motor from operating while the bin is out. Work on a stable surface and avoid forcing the bucket if it resists – check for retaining clips or screws. If the bucket engages a sensor or switch, make sure that sensor is aligned and that wires/connectors are secure when reinstalling. If in doubt,consult the service manual for your model or contact a qualified technician.
To Wrap It Up
The 241734001 Frigidaire refrigerator ice bucket serves a straightforward but essential role in the appliance’s ice-making and dispensing system: it collects, stores and guides formed ice to the dispenser while maintaining sanitary separation from other refrigerator contents. As a purpose-designed component, its correct shape, fit and material help prevent ice jams, reduce spillage and support consistent ice delivery-contributing to overall refrigerator performance and user convenience.
Identifying when the ice bucket requires attention begins with simple observation: visible cracks, warping, persistent ice clumping, misalignment with the auger or dispenser, unusual noisesor evidence of contamination all warrant closer inspection. Proper diagnosis includes confirming model compatibility, isolating the bucket from other potential causes (auger malfunction, water supply issues, or freezer temperature problems)and following manufacturer-recommended troubleshooting steps before deciding on replacement.
When inspection and testing indicate the bucket is compromised, timely replacement preserves hygiene, restores reliable dispensing and helps prevent secondary damage to the ice-making mechanism. Replacing the 241734001 part with a correctly specified unit-installed according to safety guidelines or by a qualified technician when appropriate-supports appliance longevity and consistent operation. A measured,evidence-based approach to diagnosis and replacement ensures functional reliability without unneeded parts changes.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
