WB16K10070 GE Oven Gas Stove/Range Cooktop Small Burner Head is a â¤replacement burner head component used⣠on GE gas cooking appliances. âIt is a discrete gas distribution and flame-shaping element of the âcooktop âburner assembly, âtypically formed from âstamped or machined âmetal, that mates wiht the burnerâ base, cap and orifice too create⢠the controlled flame used for⢠low- and medium-heat cooking on the small burner â¤position.
Within the appliance the small burner âhead âgoverns the âimmediate delivery andâ patterning of the gas/air mixture at a single burner port and thus interfaces directly with the gas orifice, burner cap, ignitor/spark system and theâ burner mounting⣠hardware. It âaffectsâ combustion characteristics (flame size, stability â˘and uniformity), heat â¤transfer to cookware and combustion âŁexhaust; as such it is installed on the range or cooktop surface in⢠the small-burner location and âis important for consistentâ cooking performance, fuelâ efficiency âand safe ignition and â˘burn behaviour.
in this article readers will⣠find a technical overview ofâ the WB16K10070 part including it’s âintended function⣠and typical installation locations,guidance on âverifying compatibility with specific GEâ ranges and cooktops,common failure symptoms (such as â¤uneven flame,yellow tipping,ignition problems or soot buildup),diagnosticâ checks âand trimming steps to isolate burner-head related faults,and practical replacement considerations such as fitment,orifice/gas-type â˘matching,reassembly alignment and post-replacement inspection âand leakâ testing. The focus is on providing⢠technicians, engineers and appliance owners with the context needed to assess, troubleshootâ and properly replace âthe component⤠inâ theâ appliance system.
Table of â¤Contents
- Function and Role of the⤠Small âBurner Head in GE Gas Stove/Range Cooktops
- How âŁthe WB16K10070 GE Oven Gas Stove/Range Cooktop Small Burner Head Works Inside âthe Appliance
- Common Failure Symptomsâ and âŁDiagnostic Indicators for Small Burner Head Degradation
- Compatibility, Replacement Considerationsand Installation Procedures for âWB16K10070 and Equivalent Small â¤Burner Heads
- Q&A
- Wrapping Up
Function and Role ofâ the Small Burner Head in GE⤠Gas Stove/Range Cooktops
The WB16K10070 GE â˘Oven Gas âŁStove/range Cooktop Small âburner⣠Head is the combustion interface that meters and shapesâ the gas exiting â¤the burner orifice to produce a controlled flame for low- to â˘medium-heat cooking.â Its machined ring of ports and mating surface establish the⢠flame pattern â˘and âposition the flame relative to the ignition electrode⢠and⤠burner cap; correct port â˘geometry and seating are critical for consistent flame size, stable combustionand efficient heat âŁtransfer. The part does not regulate gas âŁflow â(that function is performed by the valve and orifice), but variations âin the head’s port size,â alignmentor seating will change flame behavior, ignition timing, âand heat distribution⢠across cookware, soâ only the correct OEM head should â¤be used to⣠restore factory performance â˘on affected GE ranges.
Technicians and appliance owners âcan diagnose small burner head âŁissues by observing⣠symptoms such as uneven flame ârings, yellow tipping, delayed ignitionor âŁflame lift-off, which âtypically indicate⤠blocked ports, distorted seatingor misalignment with â˘the âŁigniter electrode.routine service consists of careful port⣠cleaning with a softâ tool, inspection for warping or⤠corrosionand correct reseating so⣠the âflange compresses âŁuniformly; avoid enlarging ports or⣠reshaping theâ head, â¤as that âalters combustion characteristics. When replacing the component,⤠verify⢠model compatibility and ensure the head seats flat and aligns with the burner⤠cap and electrode to⢠re-establish the intended flame pattern and âŁsafe ignition behavior.
- Port geometry: âŁdeterminesâ flame shape and heat distribution.
- Seating fit: ensures consistent air-gas mixing and ignition.
- material/finish: resists corrosion and maintains port dimensions.
- Compatibility: âŁmust match valve/orifice and burner cap âdesign.
| Item | Description |
|---|---|
| Part | WB16K10070 – small burner head for specified GE cooktop models |
| Primary function | Shape and direct gas flow from the âŁorifice into a stable,⢠usable flame |
| Common⣠symptoms of failure | Uneven or yellow â¤flame, delayed ignition, noisy or âunstable combustion |
| Service ânote | Clean ports without enlarging; confirm seating and electrode alignmentâ when reinstalling |
how the WB16K10070 GE Oven Gas Stove/Range Cooktop Smallâ Burner Head Works Inside the Appliance
WB16K10070 GE Oven Gas Stove/Range Cooktopâ small Burner Head functions as theâ meteringâ and flame-shaping element between the appliance orifice and the visible⤠cooking flame.The component mounts onto the⣠burner âbase so its internal mixing chamber â˘aligns âwith the gas orifice; gas flows⢠into â¤that chamber and is expelled through a circumferential series âofâ ports. Port geometry (diameter⢠and count), rim profileand internal passage sizing set the device’s â¤effective BTU output⤠and flame distribution.â Proper operation ârequires âcorrect âseating, a clean⤠port patternand the correct electrode-to-flameâ gap so the surface igniterâ or spark reliably lights the gas and sustains an⣠even blue flameâ under normal manifold â˘pressure.
The â˘burner âhead’s behavior affectsâ ignition reliability, simmer control and cross-compatibility withâ LP versus natural gas systems. A clogged or eroded âhead produces yellow,⢠lifting,â or uneven flames indicating incomplete combustion or air/gas imbalance; conversely, installing a⣠head with larger⣠ports than the appliance âorificeâ permits â˘raises heat outputâ butâ can overload the burner valve or change combustion characteristics. Technicians commonly â˘verify compatibility⣠by matching the part number and confirmingâ orifice size â¤and regulator â¤settingsand⢠by inspecting⢠flame pattern during a â˘staticâ test. Routine maintenance is limited â¤to removingâ carbon âŁdeposits from ports with a soft âŁbrush and replacing the head if ports are deformed or corroded, ratherâ than enlarging ports which alters factory calibration and can create unsafe⢠conditions.
- Function: distributes gas from orifice⢠to flame⢠ports for uniform heating
- Key parameters: port count/size, internal â¤mixing volume,⤠mounting âŁalignment
- Compatibility checks: match part number to âŁmodel,⢠confirm orifice⣠type (LP/Nat) and valve pressure
- Common faults: clogged ports, â˘misalignment, corrosion, âincorrect âignition gap
| Item | Description |
|---|---|
| Material | Typically stamped or machined steel/aluminum with heat-resistant coating |
| Typical BTU⢠influence | Determined by port geometry andâ orifice-small âŁburner heads produce lower BTU⤠for âsimmer tasks |
| mounting | Press-fitâ or screw alignment to burner base; must align âwith â˘electrode and orifice |
Common â¤Failureâ Symptomsâ and Diagnostic Indicators for Small Burner âHead âŁdegradation
The WB16K10070 GE Oven Gas Stove/Range Cooktop⢠Small Burner Head is the metal component that meters and distributes gas through a ring of ports to produce the small⣠burner’s âflame pattern. In normal operation the burner head produces a uniform blue⤠flame ring and consistent âheat output; degradation âŁfrom corrosion, accumulated carbon⣠depositsor mechanical deformation changes the portâ geometry and interrupts âlaminar âflow, causing uneven heat and inefficient â˘combustion. This part â˘is designed to fit specific GE cooktop assembliesand while âfitment tolerances are⤠small, symptoms of degradation⢠can be identical to issues caused by a dirty âor misaligned burner cap, a partially blocked orificeor an ignition electrode that is out of position, so diagnosis should separate â˘head condition⢠from upstream valve andâ ignition faults.
Technicians identify small burner â¤head degradation âby combining visual inspection with simple functional checks.Common diagnostic⢠steps â˘include removingâ the âburner cap⢠and head to inspect for clogged or enlargedâ ports, comparing flame shape after âŁa⤠carefulâ cleaning or swapping the⢠headâ with a known-good âŁsmallâ burner (if compatible)⢠to see whether the âproblem follows âthe partandâ observing ignition behavior and â¤flame color during steady state. Practical⤠indicators include â¤persistent yellow tipping orâ sooting on cookware, slow or delayed âŁignition even when the electrode sparksor a noticeably â˘weak and uneven flame that does not improve⢠after cleaning -â these point toâ physical port damage or corrosion of the WB16K10070⢠headâ rather than an upstream pressure issue.
- weak or uneven flame: âIrregular port flow âfrom âclogging or deformation reducesâ heat â˘output on âportions of the ring.
- yellow âor sooty flame: âincomplete combustion due to restricted âair/gas mixing at the ports.
- Delayed ignition or cross-lighting: Misrouted gas âflow or partiallyâ blocked ports cause â¤flame to spread unpredictably.
- Gas odor or hissing near head: ⢠Physical cracks or poor seating⢠can âleak before âignition; shut off and inspect.
| Item | Description |
|---|---|
| Flame color | Blue and steady indicates âgood port geometry;â yellow or lifting indicates flow âdisruption or sooting. |
| Port condition | Visible âpitting, deformation, â˘or carbon build-up is âa direct indicator the â¤smallâ burner head â˘needs cleaningâ or replacement. |
Compatibility, Replacement âŁConsiderationsand Installation âProcedures for WB16K10070 and Equivalent Small burner Heads
The WB16K10070 GE â¤Ovenâ Gas Stove/Range Cooktop Small Burner Head functions asâ the low-BTU distribution component that⢠produces the simmer and low-heat âflameâ on compatible GE cooktops.⤠Its âŁmachined burner ring directs gas through multiple âradial ports to create âan⢠even flameâ pattern; performance âdepends on port size, port⤠countand âproper sealing â˘against the cooktop⤠surface. Many aftermarket or âŁOEM-equivalent heads will⣠physically interchange âŁif mounting⤠flange dimensions, center-to-center spacingand the orifice diameter matchâ theâ original, but differences in manifold pressure, â˘valve seat geometryor port sizing will â¤change flame shape⤠and heat output, so visualâ flame pattern and measured âmanifold pressure shouldâ be checked after replacement.
When âŁreplacing a⢠small burner head, â¤verify mechanical fit and âthe orifice designation âbefore installationand follow⣠controlled installation stepsâ to âŁpreserve safe operation.⢠Begin by ensuring the⤠gas supply is turned off âand components are cool, remove grates and caps, then lift the burner head âoff its locating pins⣠(or unscrew⣠retaining hardware) to inspectâ for clogged ports, damaged gasketsor â¤warped seating surfaces; clean or replace as needed. â¤Reinstall â˘the matched âhead,â ensure correct alignmentâ with the ignitionâ electrode and thermocouple/pilot where applicable, tighten fastenersâ to hand +⤠quarter-turn to avoid distortion, then restore âgas and perform a thorough⤠ignition and leak â¤test while observing flame pattern at low⤠and⣠medium settings; âif flame lifts, sootsorâ flashes âback, re-evaluate orifice size and manifold pressure andâ consultâ service documentation rather than attempting regulator adjustments in the âfield.
- Verify: mounting flange dimensions,â center-to-center spacingand orifice diameter.
- Inspect: port cleanliness, electrode gapand⣠seatingâ gasket âcondition.
- Install: secure without over-torquing âand align ignition components.
- Test: confirmâ stable flame pattern, correct flame heightand perform a leak test.
| Item | Description |
|---|---|
| Port⤠count /⤠diameter | Determines flame shape and BTUâ distribution; âmust match original orâ be compensatingly adjusted. |
| Materialâ / finish | Cast brass or stamped steel with⤠plating; âaffectsâ corrosion resistance and thermal expansion. |
| Orifice size | Specifies gas flow at âŁgiven âŁmanifoldâ pressure; mismatches cause weak âorâ sooty flames. |
Q&A
What⣠isâ the WB16K10070â small â˘burner head?
WB16K10070 is an OEM small âburner âŁhead sold for some GE â˘gas ranges/cooktops.â Itâ is the cast âmetal component that sits underâ the removable burner⤠cap and⤠contains the gasâ portsâ that âcreate âthe burner⣠flame. It is indeed a direct-replacement part – check your stove’s modelâ number âand theâ GE parts diagram to⢠confirm compatibility before ordering.
How do â¤Iâ remove and âŁreplace the WB16K10070 âburner âhead?
Basic⤠replacementâ steps: 1) Turn offâ the â¤cooktop âgas supply and the appliance â˘power. 2)â Remove the âgrate(s) and the burner cap. 3) If present, âremove any retaining screw or⤠clip that secures the burner headâ to⤠the top. â4) Lift theâ old burner head straight up off the burner base (take care around the igniter).⤠5)â Cleanâ theâ seating âarea,â place the â¤new âWB16K10070 in theâ same orientation, reinstall retaining hardware â˘and the burner capand replaceâ the grate.⣠6) Restore gas/power and test ignition. ifâ you smell gas âor the burner does â˘not light properly,shutâ the gas off and âcall a qualified technician.
Whatâ tools âand supplies will I⣠need âto replace the⢠burner âhead?
Common tools: Phillips or â¤flat screwdriver, ânutâ driver or small socket set (if⢠retaining screws use them), needle-noseâ pliers, gloves, â¤and a soft brush or compressed air to clear âports/seat. Optional: penetrating â¤oil⣠for⤠stuck screws, a mirror or flashlight for âŁvisibilityand a soapy-water â˘solution or gas-leak detector to check for leaks after⢠reassembly (if â˘you disturbedâ any gas fittings).
How can I tell if the burner head needs cleaning or full replacement?
Clean the burner head if ports are clogged withâ food, greaseor carbon and you see unevenâ or weak flames. use aâ soft brush,⤠toothpick,â or compressed⣠air to clear ports -â avoid enlarging ports with drills. Replace the âburner head if it is indeed cracked, warped, heavily corroded, missing portsor âstill produces yellow/orsooty âflames after thoroughâ cleaning.Physical damage or deformation usually means replacement is⤠safer and more reliable.
what âshould â˘a correctly operatingâ small⤠burner flame look likeand what do common flame problems mean?
Normal⤠flame: steady, primarily blueâ with a distinct inner cone and a slightlyâ lighter-blue outer cone. Yellow or orange tips, sooting, â˘or very large unstable flames indicate incomplete combustion caused by clogged ports, wrong air/gas mixtureor⤠damaged parts. An intermittent pop or delayed ignition can be caused by misaligned caps or a weak igniter. If you see persistent â¤yellow flames or smell gas, shut off the âŁappliance âand have a qualified technician inspect it.
Can I use theâ WB16K10070 â¤when converting my⤠range between natural âgas and LP (propane)?
The burner head itself is often interchangeable between fuels, but accomplished conversion requiresâ changing the orifice(s)â and possibly adjusting the âair shutter or other components according âto âGE’s conversion instructions and kit. Never attempt aâ fuel conversion âwithout the properâ conversion kit and following manufacturer procedures – âŁincorrect conversion âŁcan cause unsafe combustion. If in â¤doubt hire a certified â˘service technician.
Are there any safety⣠precautions I should follow when workingâ on⣠the burnerâ head?
Yes. Turn off the gas supply and the âappliance’s electrical powerâ before starting.Work âŁin a well-ventilated area and â˘do not light matches â˘or âuse open flames while âworking. Don’t force or damage the igniter or electrode; avoid âaltering the size⤠of the burner ports.After reassembly, check for proper ignition and âstable flame. If you â¤disturbed any gas⤠fittings, perform a âleak check with soapy water or a gas detectorand if⣠you⤠detect âŁa âŁleak or any âuncertainty, âshut off the gas and call a licensed technician.
How â¤do I confirm that â¤WB16K10070 is the correct replacement part for my⢠stove?
Locate âyour appliance’s model and serial number tag (usually⤠on theâ oven frame, behind the door, on the âŁbackor under the cooktop). Use that model number on GE’s parts website âor a reputable parts supplier to view the parts diagram and confirm theâ exact small burner head part number. You can also âcompare the old part⣠visually (shape, portâ pattern, mounting features) and any stamping âon the âold part to ensureâ a match.
Wrapping Up
The WB16K10070 GE Oven Gas⢠Stove/Range cooktop small burner head plays a essential role â˘in âthe safe⣠and efficient operation of a gas cooktop. As the component that â˘shapes and directs the gas flame, it influences ignitionâ reliability,â heat distribution and combustionâ stability; a âproperly functioning burner âhead contributes directly â¤to even cooking performance andâ helps prevent issues such as âirregular flames, â¤incompleteâ combustionor localized overheating.
Accurate diagnosis and timely replacement âŁof a worn or damaged burner â¤headâ are important â¤for maintaining appliance performance and safety. Routine inspection, cleaningâ to remove obstructionsand âverification that the â˘burnerâ headâ is correctly seated can resolve many âproblems, but cracked,⤠corroded or badly warped parts should be âŁreplaced âwith the correct WB16K10070⣠OEM part to ensure fit, function and compliance with manufacturer âspecifications. When in doubt, professional diagnosis and installation are recommended to confirm the⢠underlyingâ causeâ and to ârestore the cooktop to proper working condition.
Maintainingâ orâ replacing the smallâ burner âhead as needed âpreserves â¤cooking efficiency,⤠reduces â¤the risk of âservice-related failuresand helps extend the useful life⣠of theâ range. Prioritizing correct identification and repair âensures theâ appliance âcontinues to operate reliably âand⣠safely over time.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
