240385201 Frigidaire Refrigerator Ice Container is a molded ice storage bin designed to receive, contain and deliver ice produced by an automatic ice maker in compatible Frigidaire refrigeration units. As a physical receptacle, the component typically consists of a rigid plastic bin shaped to fit the freezer cavity, an interface area for the ice maker and dispenser mechanismsand features such as an auger channel, sensor mounts or a removable scoop access depending on the refrigerator model.
Functionally,the ice container serves as the intermediate storage and handling point between the ice-making module and the user-facing dispenser. It interacts directly with the ice maker’s ejector mechanism, the dispenser drive/auger (if the appliance dispenses ice through a door), level-sensing devices or bail armsand the freezer surroundings that governs ice temperature and quality. Proper seating and sealing of the container affect ice feed, prevent jams and limit warm-air intrusion that can cause clumping or premature melting; the container can also influence load on the dispenser motor and signal circuits when equipped with sensors or switches.
In the following article readers will find a technical overview of the ice container’s design and expected behavior, guidance on checking compatibility with refrigerator models and part numbers, common failure symptoms (for example jamming, overflow, sensor faults, cracks or leakage), diagnostic steps to isolate container-related issues from ice-maker or dispenser faultsand practical considerations for replacement and installation such as verifying fitment, handling to avoid contaminationand checking associated components (auger, motor, sensors and fasteners) during service. The content is intended to help technicians, engineers and appliance owners make informed service decisions while avoiding unnecessary component swaps.
Table of Contents
- Function and Role of the Ice Container in frigidaire Refrigeration and ice Production Systems
- How the 240385201 Frigidaire Refrigerator Ice Container Operates and Interfaces with the Ice Maker Assembly
- Diagnostic Indicators and common failure Symptoms of the Ice Container Assembly
- Compatibility, Replacement Considerations and Installation Procedures for the 240385201 Ice Container
- Q&A
- The Conclusion
Function and Role of the Ice Container in Frigidaire Refrigeration and Ice Production Systems
The 240385201 Frigidaire Refrigerator Ice Container is a molded storage assembly that receives ice from the icemaker harvest cycle and presents it for dispensing or manual retrieval. Functionally it provides a controlled volume for ice accumulation, guides cubes away from the icemaker’s ejector mechanismand houses the mechanical or optical sensor interfaces that signal “full” to the control board. Constructed from food-grade plastic with reinforced mounting tabs, the container must align precisely with the ice maker and door or dispenser opening to prevent jamming, improper sensor actuationor ice bridging that can interrupt production.
- Storage and guide surfaces shaped to minimize cube adhesion and allow complete ejection during harvest.
- Mounting features and sensor cutouts that determine model-level compatibility.
- Common failure modes include cracked walls, warped mounts, and frost accumulation that reduce usable capacity.
- Replacement typically requires matching mounting geometry and sensor location rather than only matching capacity.
| Item | Description |
|---|---|
| Part number | 240385201 – ice storage and guide assembly |
| Function | Collects harvested ice, aligns cubes for dispensingand provides sensor/mount interfaces |
| Material | Food-grade ABS or similar thermoplastic with reinforced mounting tabs |
| Compatibility | Direct-fit on specified Frigidaire models; verify mounting tab spacing and sensor cutouts before purchase |
In service, technicians should inspect the container for hairline cracks, distorted mountsand excess frost that indicate airflow or door-seal issues upstream. For example, a warped container that sits slightly forward can block the ejector and cause the icemaker to repeatedly cycle without delivering ice; replacing it with a correctly indexed 240385201-framed unit restores the intended clearances and sensor alignment. During maintenance, remove and rinse the container, verify that sensor actuators operate smoothlyand compare physical dimensions and tab locations to the old part to ensure proper fit rather than relying on capacity or color alone.
How the 240385201 Frigidaire Refrigerator Ice Container Operates and Interfaces with the Ice Maker Assembly
The 240385201 Frigidaire refrigerator ice Container functions as the receiving and storage bin for ice produced by the refrigerator’s ice maker assembly. It is indeed molded to position directly beneath the ice maker’s harvest zone so cubes drop into a guiding ramp or chute and settle in the bin; correct alignment prevents impact damage and reduces cube bridging. the container also provides the mechanical and, in dispenser-equipped models, the drive interfaces: molded mounting tabs and slide rails that lock the bin in place, a plunger or microswitch engagement point that tells the dispenser/ice-maker when the bin is presentand an auger socket or paddle clearance that allows a motor-driven auger or scraper to access stored ice. In practice, improper seating of the bin (broken tabs, rotated mountor debris on the rails) commonly causes jams or prevents the auger from engaging, so technicians should verify that the bin’s rails and latch points are intact and that the disposal path is unobstructed after installation.
- mounting tabs/rails: secure the bin under the ice maker and maintain alignment.
- Dump ramp/chute: directs harvested cubes into the storage area to minimize impact and breakage.
- Dispenser interfaces: plunger/switch and auger socket allow electrical/mechanical interaction with dispenser modules.
- Material and serviceability: molded thermoplastic designed for repeated removal and cleaning; common wear points include tabs and the auger socket.
Compatibility is determined by the geometry of these interfaces rather than brand alone; the 240385201 container is intended to mate with Frigidaire ice maker layouts that share the same locating features and dispenser clearances. When assessing a replacement, compare the bin’s mounting-tab spacing, auger/paddle opening diameterand presence/location of the interlock plunger with the original part or the refrigerator model’s parts list. Typical failure modes observed in service are cracked or worn tabs, deformed ramps from ice bridgesand frost accumulation that impedes the auger-remedied either by replacing the container or correcting the underlying cause (e.g.,door-seal leaks or blocked airflow). After installing a replacement, run a manual harvest or dispensing cycle to confirm the bin seats correctly, the interlock engages, and cubes move freely through the chute to the dispenser.
| Item | Description |
|---|---|
| Mounting tabs/rails | Locate and lock the bin under the ice maker; failure causes misalignment and jams |
Diagnostic indicators and Common Failure Symptoms of the Ice container Assembly
The 240385201 frigidaire Refrigerator Ice Container is the molded receptacle that receives and stores ice from the icemaker while providing the mechanical interface to the auger/dispenser assembly and any presence or temperature sensors mounted to the bin. Its primary function is passive containment with designed geometry to guide ice toward the auger and to maintain a controlled clearance so cubes do not bridge or jam; compatibility depends on the mating tabs, mounting flangesand sensor connector locations of specific Frigidaire models.Technicians should inspect fitment and retention features first during a diagnosis because a container that is deformed,cracked,or installed off‑axis will cause predictable mechanical faults such as auger binding,premature motor current trips,or intermittent sensor activation even though the icemaker itself may be operating normally.
Common failure symptoms are a mix of mechanical, thermaland electrical cues that point back to the bin rather than the icemaker. Look for visible signs (cracks, warped walls, frost or water pooling), audible indicators (grinding or high‑load hum from the auger)and functional behaviors (slow or no dispensing, frequent dispenser motor overloads, or ice bridging/clumping). Simple diagnostic steps include manually rotating the auger to verify free travel, checking for ice bridges after a thaw cycle, confirming sensor continuity and placementand verifying clearance between the bin and dispenser chute; replacing the container is warranted when physical damage or persistent obstruction cannot be corrected by clearing or repositioning.
- Ice bridging: Cubes compact across the bin lip preventing ice drop to the auger.
- Cracks or leaks: Water accumulation, wet insulation, or uneven melting inside the bin.
- Sensor faults: Intermittent dispenser operation or false “empty” signals from misaligned sensors.
- Auger jam/high current: Mechanical interference from deformed bin walls or foreign objects.
| Item | Description |
|---|---|
| Ice bridging | Compressed ice formation that stops flow to the auger; often resolved by thaw or replacement if geometry is compromised. |
| Bin crack | Leads to leaks and frost buildup; inspect for hairline fractures near mounting points. |
| Sensor mounting | Misalignment causes false empty/full readings; verify connector seating and optical/thermostat position. |
| Auger clearance | Insufficient clearance causes binding and motor overload; check fit and rotate auger manually. |
Compatibility, Replacement Considerations and Installation Procedures for the 240385201 Ice Container
The 240385201 Frigidaire Refrigerator Ice Container serves as the receptacle and interface between the refrigerator’s automatic ice maker and the door dispenser or interior storage. Technically, the bin both contains harvested ice and provides mechanical engagement with a sensor or actuator that stops production when the bin is full; differences in bin depth, latch locationand actuator geometry determine whether a given bin will operate correctly in a particular cabinet design. For example, some Frigidaire side‑by‑side and bottom‑freezer refrigerators use a shallow, slide‑in bin with a mechanical interlock tab, while other layouts require a deeper, rear‑mounted container; matching the bin’s mounting features to the cabinet rails and the ice maker actuator is necesary to avoid dispenser jams or false full‑sensor conditions.
When replacing and installing the container, first verify model compatibility and physical fit rather than relying solely on part number matching: check clearance to the dispenser chute, alignment of the actuator taband that any built‑in fill lips or deflector panels seat against the evaporator cover as designed. Typical installation steps are to remove power or disable the ice maker harvest cycle, slide out the old bin, inspect guides and the actuator plunger for wear or obstruction, install the new bin ensuring the actuator engages the bin stop, then restore power and run a manual harvest or dispense test to confirm the sensor and dispenser operate without binding. If the dispenser lever does not trigger or ice production does not stop, re‑check seating and guide alignment; replace damaged guide clips or actuator components rather than forcing fitment, which can cause persistent jams or inaccurate fullness sensing.
- Compatibility checklist: cabinet clearance, actuator engagement, rail/mounting styleand dispenser chute alignment.
- Quick installation checks: power off, remove old bin, inspect guides, install new bin, re-enable and test harvest/dispense cycle.
- Common symptoms of misfit: dispenser jam,continuous harvest (no full signal),or ice bridging in the chute.
| Item | description |
|---|---|
| Part | 240385201-replacement ice container for select Frigidaire units; verify cabinet-specific fit before ordering |
| Mounting Type | Slide‑in bin with mechanical interlock/tab; must match cabinet rail geometry |
| Interface | Mechanical actuator for fullness sensor and alignment with the dispenser chute |
Q&A
What is Frigidaire part 240385201?
Part 240385201 is the ice storage container (ice bin) used in certain Frigidaire refrigerators. It is indeed the removable plastic bin that collects and stores ice made by the refrigerator’s ice maker.It is not the ice maker assembly or motor – it’s the receptacle that holds and guides the ice to the dispenser or auger in models that have one.
Which Frigidaire models will accept part 240385201?
Fitment depends on the refrigerator model. Some Frigidaire models use this OEM part, but many use different bins or mounts. Always verify compatibility by checking yoru refrigerator model number (usually on a tag inside the fridge or on the door frame) and cross-referencing it with the part number list from Frigidaire or an authorized parts dealer before purchasing.
How do I remove and install the 240385201 ice container?
Typical removal: open the freezer door, remove any shelf in front of the bin if necessary, pull the bin forward on its guides, and then tilt or lift to clear the retaining tabs and remove it.Installation is the reverse: align the bin on the guides, slide it in until it seats and the retaining tabs engageand replace any shelves. If the bin interacts with an auger or dispenser,make sure it is fully seated so the auger and drive engage properly. If you’re unsure or need to work near electrical components, unplug the refrigerator first.
How should I clean and sanitize the ice container (240385201)?
Empty the ice and remove the bin. Wash with warm water and a mild dish soap using a soft cloth or sponge, rinse thoroughly, and air-dry wholly before returning it to the freezer. For odor or stain removal, a solution of 1 tablespoon baking soda per quart of warm water is safe. Do not use bleach, abrasive cleanersor very hot water that could warp the plastic.Most ice bins are not dishwasher-safe unless specified by the manufacturer.
Why is ice clumping or jamming inside the 240385201 bin and how do I fix it?
Clumping and jams are usually caused by: freezer temperature being too warm, frequent door openings/humidity, old or partially melted/refrozen ice, overfilling the binor the bin not seated correctly which misaligns the auger. Start by setting the freezer to about 0°F (-18°C), empty and discard clumped ice, inspect and clear the chute and auger area, reseat the binand ensure door seals are good. If ice still clumps despite correct temperature and proper seating, inspect the ice maker/auger motor and dispenser components for mechanical faults.
The ice bin (240385201) is full but the dispenser won’t dispense – what should I check?
Check that the bin is properly seated and aligned with the auger or dispenser drive – if it’s misaligned the drive won’t engage. Look for obstructions in the chute or frozen blockages at the auger head. Verify the ice pieces aren’t overly large or fused together. If seating and obstructions are fine, test the dispenser motor/auger for power and operation (you may hear the motor running or use a multimeter if agreeable). If the auger motor is not turning, the motor, dispenser switchor control board might potentially be faulty and will need further diagnosis or replacement.
How do I know when the 240385201 ice container needs replacement?
Replace the bin if you find cracks or splits that let ice fall out, warped or melted plastic that prevents proper seating, broken mounting tabs or guides, persistent jams caused by damaged internal features, or notable discoloration/contamination that can’t be cleaned.Also replace it if it’s been exposed to high dishwasher heat and no longer fits securely or aligns with the auger.
Are there any special precautions when handling or storing the 240385201 ice container?
Handle the bin gently to avoid cracking the plastic or breaking tabs. Don’t expose it to hot water or dishwashers unless the manufacturer says it’s safeand avoid harsh chemicals or abrasive pads. Store it clean and dry away from direct sunlight and heat sources to prevent warping. When reinstalling, ensure the bin and surrounding area are dry so ice doesn’t immediately refreeze into clumps that can jam the system.
The Conclusion
The 240385201 Frigidaire refrigerator ice container functions as the primary receptacle for ice produced by the icemaker, providing organized storage, hygienic separation of ice from other compartmentsand proper interfacing with the dispenser and icemaking components. Its correct fit and condition contribute to consistent ice availability, help prevent contamination or clumping, and support reliable operation of the icemaker and dispensing mechanisms.
Timely and accurate diagnosis of container-related issues-such as visible damage, leaks, unusual dispenser behavioror compromised ice quality-is vital to determine whether repair or replacement is required. when replacement is necessary, using the appropriate, compatible part and following manufacturer guidance or qualified service helps restore functionality, avoids further damage to adjoining componentsand maintains safe, efficient operation.
attentive assessment and appropriate replacement of the 240385201 ice container help preserve appliance performance, extend service lifeand ensure consistent, safe ice delivery for everyday use.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
