WB28K10190 GE Oven Left Front Orifice is a calibrated gas orifice designed for the left front burner of compatible GE ovens and ranges. The part âis a small,⤠precision-machined insert-commonly brass or a⣠similar corrosion-resistant material-with a defined bore diameter that meters gas âŁflow from the appliance manifold to the burner ports, establishing the nominal BTU output and âŁflame â˘characteristics for that specific burner position.
Inside the appliance,the orifice sits⢠between theâ gas manifoldâ and the burner head âand⣠directly interactsâ with âthe gas âvalve,regulator/manifold pressure,burnerâ venturi or mixing passages,and the ignitionâ system. It’sâ bore size andâ seating affect⤠fuel flow rate, flame âshapeand combustion quality; thus⣠it plays a role âin heat distribution on the cooktop and âŁin safe, stable combustion. The orifice⤠also factors into fuel-type conversions (natural gas versus LP) and works in concert with pressure regulation and air/fuelâ mixing to maintain intended performance and safety â˘margins.
In this â˘article readers will find âa technicalâ examination of the âŁWB28K10190 orifice, including how it functions,⣠how to âidentify compatible appliance models and fuel-type requirements, common failure symptoms (for âexample⢠weak or⣠sooting flames, uneven heat, âŁor ignition difficulties), diagnostic checks a⣠technician or informed owner can â¤use⤠to isolate orifice-related issuesandâ practical âŁconsiderations for replacement such as matching boreâ size, seatingandâ sealing requirements. Theâ coverage emphasizes technical âcontext and compatibility considerationsâ to support accurate diagnosis âand correct part selection, while ânoting â¤relevant safety checkpoints that shouldâ guideâ any service decision.
Table of Contents
- Function and Role of the⢠Left Front Orifice in GE Ovenâ Burner Performance
- How⣠the WB28K10190 GE Oven Left Front Orifice⣠works Inside the Appliance – Gasâ Flow, â˘Pressure and Flame Control
- Common Failure Symptoms and Diagnostic Procedures⤠for the âLeft â¤Front Orifice
- Compatibility, â˘Replacement Considerations andâ Installation⤠Procedures for WB28K10190
- Q&A
- In Summary
Function andâ Role ofâ the Left⤠Front Orifice âin GE Oven Burner Performance
theâ WB28K10190 GEâ Oven Leftâ Front Orifice is⤠the small precision jet that metersâ gas to⢠the⤠oven’s left front burner,â establishing âthe âflow rate â˘andâ initial pressure drop â˘before theâ valve and burner⤠mixing⢠air.⢠As a precisely sized aperture, the orifice âŁdetermines the âmaximumâ volumetric flow for a â˘given manifold pressure;â its diameter and condition directly influence flame âheight, stabilityand heat output. This component must match âthe appliance’sâ fuel type (natural gas or liquid propane) and the manufacturer’sâ specified diameter to maintain correct air-fuel ratio âand safe combustion performance.
In operation, the orifice âŁworks âŁtogether⢠with the gas valve⣠and regulator:â if manifold pressure is normal, changes in⣠heat output are controlledâ byâ the⢠valve â˘opening time and the orifice size. Blockage,⢠corrosionor using an⤠incorrect âdiameter results inâ symptoms such as weak or unevenâ flame, yellow tips orâ soot⤠accumulation, delayed ignitionor excessively loud/roaring flames.⣠Technicians should inspect the orifice âfor debris and physical damage and replace it rather thanâ file or enlarge it; verify manifold pressure and valve operation when symptoms persist toâ distinguish orifice issues from upstreamâ problems.
- Primaryâ function: accurately restricts gasâ flow â¤to set burner input.
- Common symptoms of âmalfunction: yellow flame, soot, low BTU⤠deliveryor âflashback/roaring flame.
- Compatibility ânote: use the OEM-specified⣠jet size for the appliance’s fuel type or âthe exact â˘replacement âpart.
- Service â¤tip: clean only âŁif unobstructed and intact; replace âif any burrs, deformation, âorâ corrosion are present.
How the⤠WB28K10190 GE âOven Left Front âOrifice Works Inside the Appliance – âGas⣠Flow,â Pressure and⤠Flame⤠Control
The⢠WB28K10190 GE Oven⢠Left âfrontâ Orifice is⤠a precision-machined jet âthat meters⢠gas flow âfrom the oven manifoldâ into the left front burner tube. Located â¤at the âburner inlet,the orifice creates⤠theâ required pressure drop between the⤠manifold and the burner ports âso â˘that a controlled volumetric flow and jet velocity are delivered⤠to âthe mixing/combustion âarea. Itsâ bore diameter and thread/specification are matched to GE’s burnerâ geometry and âexpected manifold pressure; together these parameters set the stoichiometric⢠air-fuel âratio, flame heightand heat output for the left-front cooking zone. âInâ practice, âthis means the orifice works in âconcert withâ the appliance regulator âand burner⢠tube⣠ports-if âany single element (orifice size, regulator setting, tube port condition) is⢠out of spec, flame shape and âtemperature control will⣠be âŁaffected.
Operational behaviour changes predictably with pressure and condition: a partially clogged â˘orifice âreduces âflow and⤠produces low, unstable flames âand long preheat âtimes; an orificeâ withâ a⤠larger-than-specified⤠bore (or the wrong fuel type installed)⢠gives overly large, noisy flames and can cause sooting or regulator hunting. Technicians should verifyâ the stamped â¤part â¤number âand confirm fuel type â¤(natural gas vs. LP) before replacementand measure â¤manifold pressure and observe flame âcharacteristics afterâ fitting. Practical checks include⢠visually inspecting the flame color and âlift, performing a âpressure â¤test⣠at the⤠manifoldand ensuring âŁthe orifice â˘seats cleanly â¤in the burner body; replacing the WB28K10190 with⣠the correct equivalent restores designed flow and â¤flame control withoutâ adjusting other âcomponents.
- Key âinspection points: orifice bore cleanliness,⣠part-number match, seating/threadsand manifold pressure measurement.
- Common symptoms of orifice issues:⤠weak flame,â uneven heating, yellow tipping/sootor burn-back/noise.
- Compatibility:â match fuel type and OEM specification;⢠conversions⣠require specific orifice âsets âŁand regulator adjustments.
| Item | Description |
|---|---|
| Function | Restricts and meters gas flow from manifold âŁto burner â˘to set flame⢠size and âŁheat â¤output. |
| typicalâ symptom when restricted | Lowâ flame,slow heat-up,uneven cooking on the left-front⣠zone. |
| Compatibility note | Buy orifice matching OEM part number âand â˘fuel type; conversion âŁbetween⣠NG and LP âŁrequires different jet sizes and/or regulator change. |
Common failure Symptoms and⤠Diagnostic Procedures for the Left Front Orifice
The⤠WB28K10190 GE Oven Left Front Orifice is a precision metering âport that⣠determines the gas flow to the left-front burner; âits internal diameter âŁand seat geometry directly affect flame size, stabilityand âheat output. A partially blocked orifice restricts âŁflow and produces weak, âliftingor intermittent flames andâ delayed ignition,â while anâ eroded or oversized aperture results⣠in âŁhighâ flames, yellow tippingand sooting. Compatibility âwith the oven’s manifold pressure and burner design isâ critical: installing an orifice with the wrong⣠orifice⤠bore âor thread canâ produce incorrect BTU delivery and unsafe combustion characteristics, âso⤠verify model-specific fit and thread âtype beforeâ replacement.
Diagnosing orifice-related â¤issues begins with⢠a visual inspection of the burner ports andâ orifice for carbon, greaseor corrosionand⢠progresses to measured checks: â¤verify manifold gas âŁpressure âŁwith a manometer, observe flame pattern under loadand compare against a known-good â¤orifice or factory specification. Typical diagnostic actions include cleaningâ with âŁappropriate solvents and low-pressureâ air,testing ignition timing and electrode spark pattern,and performing a⤠controlled swap test; âŁalwaysâ shut off â¤the gas supply and depressurize âthe line before removing the orifice. Practical troubleshooting âstepsâ and âcommon indicators are listed below to help â˘narrow failures to the orifice âversus âŁupstream âŁcomponents.
- Symptoms: weak or uneven âflame,⢠yellow or sooty flame âtips, delayed âignitionor â¤flame âŁlifting near the burner head.
- Quickâ checks:⢠visual port cleaning,electrode gap and spark inspection,and swap with aâ verified â¤orifice.
- Measured checks: manifold pressure reading, flame-stability observation under rated⣠heat,â and bore measurement if â˘tools are available.
| item | Description |
|---|---|
| Location | Installedâ at the burner inlet on the left-front burner⤠assembly; accessed by âremoving the burnerâ cap and cooktop components. |
| Compatibility | Designed for specific GE âŁrange families; â˘confirm oven model and âthread style before ordering or replacing. |
| Common failure modes | Cloggingâ from âŁdebris/grease, internal erosion enlarging the bore,⣠and mechanical damage toâ the seat or⤠threads. |
| Diagnostic tools | Low-pressure air, soft-bristle brush, manometer for pressure⤠checksand a known-good orifice for âswap testing. |
Compatibility, âReplacement⢠Considerations⤠and Installation Procedures for WB28K10190
Theâ WB28K10190 GE â¤Oven Left⣠Front â¤Orificeâ is a⣠precision gas metering element thatâ controls the flow of fuel to the left-front surfaceâ burner. The orifice âsize, in combination with manifold pressure and the gas valve â¤flow characteristic, sets the burner input and flame shape; an incorrect orifice will âproduce âlong âor lifting flames, yellow tipping, sootor reduced heat output.Compatibility depends on âŁmanifold thread formâ and the appliance’s â˘fuel type (natural gas or LP). âŁFor conversions orâ cross-replacements, confirm⣠the âŁappliance model and service sheet âŁrather than relying solely on visual similarity, because even âsmall differences in hole âdiameter or thread type change âŁburner performance and safety margins.
- Verify model and âŁgas type ⢠against the service documentation before ordering replacement âparts.
- Isolate⣠the âgas supply⣠and disconnect power to the appliance prior to âstarting work.
- Remove grates, burner⣠caps and heads â¤to⢠access the orifice; use the correct-sized â¤wrench or socket to avoid⣠rounding flats.
- Installâ the ânew orifice⢠hand-tight,then apply minimal additional torque-over-tightening can damage manifold âthreads.
- Perform a âŁleak test⣠with a soap solution âat⢠the valve/orifice⣠junction,â then light⤠and observe a stable, primarily blue flame.
| Item | Description |
|---|---|
| Part | WB28K10190 -â left front â˘burner orifice; precisionâ orifice âŁelement âfor specified GE⢠ranges |
| function | Regulates gas flow⣠to setâ burner BTU âand flame geometry in concert with manifold⣠pressure |
| compatibility | Match appliance â˘model,manifold â¤thread,andâ gas type; consult service sheet for allowable substitutes |
| Installation note | Shut off gas,avoid over-torque,perform âleak testâ and flame observation âafter replacement |
During replacement,seized orifices may require penetrating lubricant or gentle heat âapplied to âthe âmanifold,but take care to protect nearby seals⢠and wiring; if threadsâ are⣠damaged,repair âŁor replace the⢠manifold section rather than forcing a fit. After installation, confirm correct performanceâ byâ measuring manifold pressureâ with a manometer if available and⣠checking burner â¤behavior under â˘a full range âof settings; persistent yellowing or instability after correct â˘orificeâ installation typically indicates a valve, regulatoror âair shutter issueâ rather than the orifice âitself.
Q&A
What is the WB28K10190 and what does the left front âorifice do?
The âWB28K10190⢠is âŁthe factory replacement gas âŁorifice â˘(jet) for the left âfront â˘burner â¤on certain GE gas ranges. The orifice is a small precisely sized hole that controls the flow of âgas âto âthat âburner and thus determines âflame⤠size, heat output and stable â¤combustion for that position.
How do I know if WB28K10190 is the correct part for my range?
Confirm⣠compatibility âby checking your â¤oven/range model number againstâ the GE parts list or âan authorized parts seller. You can âalso compare the part number⣠stamped onâ the existing orifice âor consult âthe owner’s âmanual/parts diagram. Do not assume visually similar â˘jets âareâ interchangeable-use the OEM partâ number or an approved cross-reference.
What symptoms⤠indicate âŁthe left front orifice might be clogged or⣠failing?
Common âŁsigns include âa weak or⣠uneven flame on the leftâ front âŁburner, yellow/orange (sooty)â flames rather of blueâ flames, difficulty lighting, sputtering or noisy⣠burnersor heat âoutput that’s ânoticeably low.If you smell gas, âŁstop using theâ appliance⢠immediately and â˘contact a â˘qualified⣠technician or gas utility.
Can⢠I clean⤠the orifice or do I need⣠to replace it?
Minor clogs can sometimes⤠be cleared (for example, with âcarefulâ blowingâ of â¤compressedâ air or⤠removal of debris) âŁbut you must not enlarge or damage the hole. If⤠the âorifice is âcorroded,damaged,or the flame problems persistâ after cleaning,replace it with the â˘correct OEM⤠part. When in doubt, replace rather than risk⣠a compromised orifice.
Is WB28K10190 â¤different for natural gas âŁvs. propane⤠(LP)?
Yes. Orifices⢠are sized for the âfuel type: propane (LP) requires⣠a smaller orifice than natural âŁgas. Using âthe wrong âorifice will give incorrect flame and heat and can âbe unsafe. Converting a range between⤠gas types typically requires orifice changes and regulator adjustments â¤and should be performed by a âqualified technician following manufacturer instructions.
Can I replace âŁtheâ leftâ front⢠orifice⢠myself?
Qualified DIYers⤠can replace an orifice if â¤they âare comfortable working on â˘gas appliances, â˘but you must firstâ shut off the gas supply â¤and power,â and follow⤠safe procedures. Becauseâ gas work carries risk (leaks, improper⢠combustion), many manufacturers and technicians recommend âhaving a qualified appliance service âtechnician perform the replacement and any subsequent leak and combustion checks.
How do I identify âŁthe⢠orifice size or â¤markings on the part?
OEM orifices⢠frequently enough have the part⤠number or size stampedâ or printed on them. âIf no marking is present, âuse the appliance model number to âlook up the correct part âin the manufacturer’s parts list or at anâ authorized parts supplier. â¤Do not âŁattempt â¤to drill⣠or re-size âanâ orifice to âchange⣠its size-always use the âcorrect OEM orifice.
Willâ replacingâ only âthe left front orifice affect other burners or the oven?
Replacing the âleft â˘front âŁorifice affects â˘only that burner’s gas â¤flow. It will not change other burners or the oven unless you are performing a gas-type⢠conversion, which âŁrequires changing multiple orifices and possibly the regulator. Make sure all burner orifices and regulator âsettings match the fuel type and âŁmanufacturer’s conversionâ instructions when doing conversions.
Where can⤠I buy a genuine â˘WB28K10190â and how do I ensureâ I get the right part?
Buy from GE factory parts dealers, authorizedâ appliance parts storesorâ reputable online retailers that allow you to confirm compatibility by entering your appliance model number. Verify the part⢠numberâ (WB28K10190) âand check the seller’s return policy. if unsure,contact GE customerâ supportâ or aâ certified service technician to confirm the â¤correct part⤠for your specific model.
In â˘Summary
The WB28K10190 GE âŁoven â¤left⤠front orifice is a small but critical component that⣠regulates the flow âof gas to the left front burner. By âdetermining the rate and pattern⢠of gas delivery,⣠theâ orifice directly influences â¤flame stability, heat outputand overall cooking performance. âŁProper âfit â˘and specification are vital to maintain consistentâ temperature control and efficient combustionâ within the â¤appliance.
Accurate diagnosis and âtargeted replacement of a âfaultyâ orifice preserve both performance âŁand safety. Symptoms such â˘as uneven heating, âŁweak â¤or âirregular flamesor burner⢠instability warrant inspection by âa trained technician whoâ can confirm â¤whether the orifice, related componentsor âsystem settings are the underlying cause.â Using the correctly specified replacement part and following manufacturer-recommendedâ procedures helps avoid unintended issues and restores expected operation.
When identified âŁand âaddressed appropriatelyorifice replacement is a âŁstraightforward way toâ maintain âoven reliability âand efficiency. Prioritizing careful diagnosis,â correct part selectionand professional installation â˘ensures safe, consistent performance and prolongs the service life of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
