The WE25M87 GE Washer LP Conversion Kit is a conversion kitā intended ātoā modify a compatible GE gasā£ appliance to operateā on liquid propane (LP) instead of ā¢its factory gasā¤ type.as aā component-level accessory, a ā¤conversionā kit typically contains items such as replacement burner orifices, regulator orifice ā£springs or inserts, adjustment instructions and labels; itā¤ is not ā£an electronic control but a set of hardware andā¤ settings that change how ā¤the appliance meters and regulates ā¢fuel to theā combustionā system.
Within the appliance,ā¤ the conversionā kit interfaces with the fuel delivery and combustionā subsystems: it alters orificeā¢ flow rates and can require regulator adjustments ā¤so that the gas valve,ā¤ burners, ignition system and flame sensing devices receive theā¤ correct pressure and fuel ā¢volume for LP. ā¢Proper conversion affects flame ā£shape, combustion efficiency, heat output āandā¢ safety interlocks; incorrectā¤ or incomplete conversion ācan lead to ignition problems, sooting, elevated carbon monoxideā risk or improper temperatureā¤ performance. The kit ā¤is applied ā¢at theā burner/gas valve assembly and requires verification of āsupply pressure,ā leak testing and relabelling to reflect the new fuelā type.
In this article readers willā find aā technical description of how the WE25M87 ākit changes fuel metering and āregulator settings, ā£guidance on checking ā¤model compatibility āand required safety markings,ā¤ common failure symptoms and diagnostic steps when combustion orā£ ignition issues ariseand practical ā¢considerationsā£ for āreplacement or reinstallation. ā£The coverage will emphasize inspection points, pressure and orificeā¢ verification, limited troubleshooting procedures a technician or informedā appliance ā£owner can performand ā¤when to defer to qualified āservice or follow local codeā£ requirements ā£for gas-fueled appliance conversions.
Table of Contents
- Function and ā£Role āof the WE25M87ā Conversion Valve and āAssociated LP Conversion Componentsā£ in ā¤GE Gas Washers
- How the WE25M87 GE Washerā¤ LP Conversion Kit Works ā£Inside the Appliance: ā¢Regulator, Orificeand Pilot Adjustment Mechanics
- Common Failure Symptoms of āLP Conversion Components: Ignition ā¢Failure,ā Weak Flameand Pressure-Related Faults
- Compatibility and ā¤Supported GE Washer āModels ā£for the ā¤WE25M87ā GE Washerā£ LP Conversionā Kit Including Gasā Type and Serial Number Ranges
- Replacement Considerations and Installation āProceduresā for the WE25M87 LP Conversion Kit: Seals, Torque Specs,ā and leak Testing
- troubleshooting ā£and Diagnosticsā for WE25M87 conversions: āManometer Measurements, flame Pattern Analysisand electricalā£ Checks
- Q&A
- Theā¤ Way Forward
Function and Role ofā¤ the WE25M87 Conversion āValve and Associated ā£LP Conversion Components inā GEā£ Gas Washers
The ā¤WE25M87 āGE āWasher LP Conversion ā£Kit ā¤contains the replacement ā¤conversion valve and matchedā£ components thatā¢ adapt ā£a GE gas washer from natural gas āto ā¢liquid ā¤propane. The conversion valve in this ākit functions as āthe primary flowā controlā¤ element in the appliance gas train: it routes ā¤inlet gas through the ā¤correct porting and āprovides the interface for the kit’s sized orificesā¢ and regulator adjustments ā¤soā the burner receives the correct volumetric flow at LP manifold pressure. Technically, the ā£valveā itself does not “change”ā fuel chemistry; instead ā¢it providesā the correct mechanical pathways and mounting forā theā£ LP-specific orifice(s), āpressure regulator springā¢ or seating, āand gaskets required toā¢ achieve properā manifold pressure andā¤ stable ignition in models designed for conversion.Practical compatibilityā depends on matching the WE25M87 valveā toā£ the washer ā¢modelā¢ number and using theā¤ accompanying orifice set and regulator parts from ā¢the same kit rather āthenā¤ mixing components from ādifferent kits ā¢or manufacturers.
- Conversion valve (WE25M87) – main gasā path and ā£mounting āfor LP components
- Orifice setā – controls burner flow rate for LP
- Regulatorā spring/seat or adjuster – establishes LP manifold pressure
- Seals/fasteners and conversion label – ensureā¤ leak-free assembly and documentation
| Item | Description |
|---|---|
| Conversion ā¤valve | Provides correct porting and āmechanical interfaceā¤ for LP orifices and regulator components |
| Orifice | Restricts flow to achieve target mass āflow appropriate for āpropane āat specified pressure |
When installed, the āvalve behaves as part of the pressure-regulated gas supply: theā regulator portion setsā theā¢ upstream/downstream pressure differential while the āorifice determines flow for givenā burner demand, so technicians must verify manifoldā pressure and flame characteristics after āconversion. Typical verification āstepsā include leak-checking all ājoints, measuring manifold pressure under steady burner āload to confirm itā£ matches the washer’s LP ā£specification, āand inspecting flame shape and stabilityā£ (clean ā£blue flame,ā no lifting or excessive yellow tipping). ā¢Incorrect combination of valveorificeor regulatorā settings can produceā symptoms suchā as delayed ignition,ā¢ weak or ālifting ā¤flame, so use the model-specific data sheet and the ākit’s labeled parts to ensure the WE25M87 conversion valve ā¢and associatedā¤ LP componentsā¤ are installed and tested as an integrated system.
How the WE25M87 GE āWasher LPā¤ Conversion ā¢Kit Works Inside theā¢ Appliance: Regulator, Orificeand pilotā£ Adjustment Mechanics
Theā¤ WE25M87 GEā¢ Washer LP conversionā Kit ā¤changesā¤ theā£ gas-delivery componentsā¢ inside ā£the appliance so the valve and āburners operate correctly āon propane ā(LP) instead ofā natural gas. The kit provides LP-sized ā£mainā¢ and pilot orificesā and the parts āor springs āneeded to alterā¢ regulator ābehavior; together these components reduce volumetric flow throughā£ the burner āwhile matchingā¢ the higher manifold pressure ā£typically usedā¢ with āLP.Compatibility depends on the washer’s gas valve ā¢family and burner geometry, so the kit is intended for specific GEā¤ models and valve assemblies ā¢that acceptā¢ the supplied orifices ā¢and regulator partsā rather thanā¤ global retrofit on everyā£ valve design.
Inside the applianceā the conversion balances three mechanical elements:ā¤ theā¤ regulator sets the downstream āmanifold pressure, the orifice limits volumetric flowā at that pressureand the ā pilot āorifice/adjustment ensures a stableā ignition āsource and reliable thermocouple heating.if the regulator isā left in its natural-gas setting āwhile using LPā orifices, manifold pressure and flame characteristics willā be incorrect; conversely,ā¤ using LP regulator settings withoutā changing the āmain āorifice āwill overfuel ā¢the burner. Typical āpractical checks after installing the kit include verifying manifold āpressure in inches of water column andā observing pilot flame shape and thermocouple response – a weak pilot will cause intermittent valveā£ dropout, while a yellow, ā¢sooty main flame indicates excessive fuelā¤ or poor ā£mixing. A concise checklist ofā¢ the kit’s mechanical roles and observable outcomes is ā¢below.
- Regulator: converts inlet pressure to the correct āmanifold pressure āfor LP operation.
- Main orifice: reduces cross-sectional area to limit flow at the LP manifold āpressure.
- Pilot assembly: ā£changes orifice size and ā¢needleā adjustment to secure stable ignition and thermocouple āheating.
- Testing: measure manifold pressure and confirm clean, steady blue flameā forā¢ both pilot and main burner.
| Item | Description |
|---|---|
| Regulator ā¢setting | LP manifold pressure typically ānear 10″ w.c.; natural gas typically 3.5″ā w.c.;ā¢ conversion partsā¢ adjust regulator response. |
| Main orifice | Smaller diameter for LP to achieve equivalent heat release at higher manifoldā pressure; sizes vary by valve and burner. |
| pilot orifice/adjustment | Smaller pilotā orifice andā fine āadjustment ensure sufficientā¢ flame to keep thermocouple/thermopile within operating ārange without āoverfiring. |
Common Failureā¢ Symptoms of LPā¤ Conversion Components: Ignition āFailure, Weak Flameand Pressure-Relatedā Faults
The āWE25M87 GEā¢ Washer LP Conversion Kitā modifies the gas ā¤delivery components ā¢that control flame formation andā£ pressure regulation āduring conversion toā¢ liquid petroleum ā¤(LP) fuel. āThisā¤ kit typically replacesā¤ orifice jets, regulator springsand ā¤related fittings so the burnerā sees the correct orifice sizeā andā¤ spring tension for LP. ā¢If components āfrom theā¢ conversion kit are missing, āmismatchedor installed on an incompatibleā valve body, the burner assembly willā¢ notā¢ achieve the intended air-gas ratio or manifold pressure, ā¢producing ignition failure, unstable ā¢flameor pressure-related faults ārather than a clean, stable āLP flame.
- Ignition āfailure -ā¤ continuous sparking or noā£ ignition despite correct electrical operation ofā the igniter/ignition module, āfrequently enoughā¢ caused by blocked or ā£under-sized orifices, incorrect pilot/igniter alignmentor insufficient manifold pressure after conversion.
- Weak flame – low flame ā¢height or yellow,sooty flame from improper ā£orifice size,restricted gas passages,or incorrect air shutter/venturi settings for LP.
- Pressure-related faults – cycling, sudden flame interruptionorā¤ loud, sputtering flames resultingā from incorrect regulator spring, a stuck regulatoror leaks in the downstreamā fittings.
| Item | Description |
|---|---|
| Orifice jet | LP jetsā in the kit reduce flow to āmatch higher energy contentā£ of LP; incorrect jet size causes weak ā¤or over-rich flame. |
| Regulator spring | Sets outlet/manifold pressure forā LP; wrong spring or improper seatingā changesā¢ regulator setpoint and causes pressureā£ faults. |
| Solenoid/valve assembly | Requires full port opening and rated coil voltage; partial lift or debris reduces flow and āprevents reliable ignition. |
Compatibility and Supported GE Washer Models āfor ātheā WE25M87 GE Washerā£ LPā¤ Conversion Kit Includingā£ Gasā¢ Type and Serial Number Ranges
The WE25M87 GE ā£Washer LP Conversion Kit āisā¤ intended to adapt factory-configured gas components to āoperate on liquefiedā¤ petroleum (LP) gas by changing orifice sizes and regulator settings and by providing anyā gaskets or fittings required forā safe operation. Compatibility is resolute by the appliance model number,gasā type printed on the āappliance data plate,and theā serial-number production āranges published in GE service documents; theā£ kit will only function correctly if the washer’s internal gas train andā£ burner geometryā match the ādesign assumptionsā£ of the kit.ā Technicians must confirm the appliance is a user-installable candidate (someā older or ānewer chassis require ā£different conversion hardware) and must re-check manifold pressure and flame characteristics after installation āto verify correct combustion andā safety interlock behavior.
- Locate the appliance ādata plate (model and serial)ā¤ and compareā£ against āthe ākit’s supported-model ālist in the GE service bulletin.
- Verify the factory gas ā¤type and determine whether the kit converts from NaturalāLP orā LPāNatural before ordering.
- Confirmā¤ control and gas-valve part numbers inside theā washer matchā¢ those referenced forā¤ WE25M87ā¢ compatibility.
- After āinstallation, performā a static ā£manifold pressure testā and visual flame inspection per manufacturer procedure.
| Item | Description |
|---|---|
| Gas type | WE25M87 isā supplied to modify components for ā¢LP operation;ā verify original appliance gas type on data plate before āconversion. |
| Identification | Use the ā¤model number and serialā onā the data plate; serial ārangesā¢ in GE bulletinsā indicate whichā production ā¢runs theā kit supports. |
| Verification steps | Compare controlā¤ and valve part numbers,confirm regulator/orifice changes,perform pressure ā¢and flame tests post-install. |
Replacement considerations and installation Procedures for āthe WE25M87ā¢ LP Conversion Kit: Seals,ā¤ Torque Specsand āLeak Testing
The WE25M87 GE Washer LP conversion kit includesā£ the small seals and regulator components that directly affect gas sealing and pressure regulation afterā conversion to liquid propane. Sealsā¢ in the kit are typicallyā Oārings āand flat gaskets that sit at the inlet union, regulatorā portand pressure tap; ā¤their material must be compatible with LP (Viton or equivalent is common) becauseā£ LP has different chemical andā temperature effects than natural gas. During replacement, inspect mating āfaces for nicks or debris, ā¢replace any ā£deformed gasketsand ensure threads āand sealā¢ surfaces are free ofā old compound or paint. Use only gasārated PTFE tapeā£ or pipeā¢ dope on pipe threads where the ākit āinstructions allow;ā¤ avoid excess compound that can migrateā£ into āregulator ports or sensing orifices andā¢ affect regulatorā¤ performance.
Install sealsā£ with even ā£compression,ā¤ handāstart threads and āthenā¤ tighten to the specified torque to avoid ā¢distortion āof the gasket and to ā£preserve regulator āalignment. Typical installation checks include sequentially torquing mounting screws, ā¤securing theā¢ inlet unionand āthenā performing both ā¢a static leak test and a dynamic ā¢testā£ while theā£ applianceā¢ runs. Use a manometer toā verifyā LPā manifold pressureā (commonly around 11ā in. WC for āmany LP appliances) and verify that āpressure remains within the kit’s tolerance under load; ā¤if usingā aā soap solution, apply to āevery joint and observe for bubbles while the system āis āpressurized. If any leak is ādetected or ifā pressures fall outside ā¤the ā£specified range in the kit documentation, stop and correct the fittingā¢ or replace ā¢theā seal before returning the appliance to service.
- Replace all ā¤seals supplied by theā kit; do not reuseā£ old Oārings or gaskets.
- Lubricate Oārings only with approved silicone grease; avoid hydrocarbon ālubricants near sensing orifices.
- Tighten fasteners ā£in sequence and verifyā¤ torqueā£ against the kit or appliance service manual.
- Performā¢ static and dynamic leak tests with āa manometer and soap solution; retest after a ā¤short run cycle.
| Item | Description |
|---|---|
| Inlet ā¢union nut torque | Referenceā torque:ā£ 40-80 inālb (verify kit label); tighten to avoid gasket ācreep,ā then retest for leaks. |
| Regulator locknut /ā£ mounting screws | Reference torque: 15-30 inālbā for small screws; ensure regulator body āremains square to mating flange. |
| Manifold āpressure (LP) | Typical target: ~11 in. WC (useā manometer āand follow kit ātolerances); verify underā steadyā£ load. |
| Leak testā method | Soap solution āat joints + manometerā verification; test both ā£static andā with appliance running. |
Troubleshooting āand Diagnostics for WE25M87 Conversions: Manometer Measurements, Flame Pattern Analysis, āandā Electricalā Checks
The WE25M87 GE Washer LP Conversion Kit changes burner orificeā sizes and may include a regulator or spring to set ā¤higher manifold pressure forā propane;ā confirm āthe kit was installed correctlyā before running diagnostics. Use a manometerā at the appliance ā¤test port to measure staticā¢ (off) and running (on) manifold pressures: āpropaneā£ (LP) systems are typicallyā¢ adjusted to roughly ā¤ 10-11″ WC forā the manifold ā¤while natural gas systems run near 3.5″ WC. If measured ā¢pressures ā£deviateā¤ from theseā ranges, the conversion parts ā(orifice, regulatorā£ spring) may be incorrect or installed improperly, producing weak heat or excessiveā£ flame lift. āWhen checkingā¤ compatibility, verify the conversion orifice dimensions and regulatorā£ settingsā£ match ā¢the applianceā service literature so thatā£ flow ācharacteristics and pilot/ignition behavior align with the washer/dryer assembly’s requirements.
| Item | Description |
|---|---|
| Manometer (LP) | typical ārunningā¤ manifold pressureā ~10-11″ WC; verify bothā static and loaded readings at āthe appliance test port. |
| Flame pattern | Main flame should ābe ā¢a short, well-defined blue ā¢cone; yellow tipping, lifting or sootā¢ indicate air/fuel āimbalance or āincorrect āpressure. |
| Thermocouple / Thermopile | Thermocouple outputsā¤ in the tens of millivolts (ā20-40 mV); thermopile systemsā¢ produce several hundred ā¤millivoltsā (ā350-750 mV);ā compare to component spec. |
| Gas valve coil | Solenoid coilā¢ resistance typically tens āof āohms (approx. 20-100 āĪ©); open or shorted coil indicates ā£valve replacement isā required. |
Visual flame assessment and basic electrical checks quickly narrow faults: a āsmall, unstable pilotā or a pilot that extinguishes under slight draft ā£suggests āa blocked pilot orā¢ a weak thermocouple/thermopile; aā£ large orange, sooting flame suggests either excessive pressure, wrong orifice size, āor insufficient āprimary air.ā Use a multimeter and manometer together during fault isolation – suchā¢ as, confirm the gas valve coil has expectedā resistance and that the thermocouple/thermopile produces ā¤theā minimumā¢ holding voltage while the pilot is lit, thenā verifyā¢ manifoldā¢ pressure while theā main burners are āoperating. practical troubleshooting ā¢steps to ā¤document ā¤during inspection include ā¢symptoms āto note and measurements to capture for parts āreplacement orā adjustment:
- Record static and running manifoldā pressure and compare ā¢to the ā¢conversion kit/appliance specification.
- Photograph the flame: note color,ā length,ā£ and lifting or soot;ā use this to ādetermineā orifice or air shutter issues.
- Measure thermocouple/thermopileā millivolts andā¤ gas valve coil resistance; replace components that are out ā£of spec.
- Checkā¤ continuity of safety interlocks and ignition electrodes/gap to rule out electricalā faults causing intermittent operation.
Q&A
What is the āWE25M87 ā¢LPā¤ conversionā¢ kit and what does itā¤ do?
The WE25M87 is GE’s conversion ākit used to change a ācompatible gas ādryer from naturalā gas (NG) ā£operation to ā¤liquid āpropane (LP). It supplies the correctly sized orifice(s), conversion labeland any required regulatorā£ adjustment parts plus instructions so the appliance ā£will operate safely ā¢and efficiently on LP.
How ā¤do I know if the WE25M87 kit ā¢is compatible āwith my ā£GE dryer model?
Check ā¢the ā¤dryer’s model and serial number ā¢(usually on the door frame or rear panel) and consult the dryerā£ owner’s manual or GE āAppliances parts lookup.ā¤ The kit is intended āfor specific GE gas dryer families; if inā doubt, contact GE Appliances customer serviceā orā¤ an authorizedā¢ service technician āto confirm compatibility ābefore purchasing.
Can I install the WE25M87 kit ā¢myself, ā¢or doā£ I needā a professional?
Conversion involves workingā on gas connections, burner orifices and the gas regulator and must comply with local codes.GEā and mostā local regulations ārecommendā (and sometimes require) that āa qualified, licensed gas service technician performā theā conversion.Using a trained professional reduces safety and warrantyā¤ risks.
What major changes are madeā during the conversion (high level)?
Atā¤ a high level the technicianā shuts off ā¤and ā¤disconnects the gas, changes theā main ā£burnerā orifice(s) to the LP size, applies ā¤the regulator adjustment or replacementā£ specified in āthe kit, āinstalls the provided conversion label, checks ā£ignition and flame characteristics, performs a gas-leak testand verifies manifold pressure/operation per GE specifications.
Whatā£ parts come in the āWE25M87 ā¢kit?
Typical contents are one or ā¤more LP burner orifices sized for propane, a āconversion instruction sheet,ā and a conversion/self-adhesiveā labelā to place āon the dryer.ā Some kitsā¤ include āa regulator cap or spring and sealing hardware. Exact contents canā varyā£ by kitā revision-confirm theā£ parts list ābefore starting the job.
Do Iā need to āreplace the ā¤gas valve or regulator when āconverting to LP?
Not always.Many GE ā¢dryersā£ are designed to convert using the provided orifice(s) plus a regulatorā¢ adjustment orā plug included ā£in the kit. āIf the dryer’s ā¢regulatorā or valve is damaged,out of specification,or theā¤ model requires different parts,the technician will recommend replacement.ā£ Alwaysā follow the kitā and ā£manufacturer instructions.
How can ā¤I tell the āconversion was done correctlyā£ and the dryer is operating safely on LP?
Afterā conversion aā¢ qualified ā£technician willā¢ check for ā¢no gas leaks (soap solution or āelectronic detector),ā¤ confirm correct āignition and steady flame ā£(typically shorter, blue flames withā minimal yellow tips), verify heat ā¢output āand cycle performance,ā and measure manifold pressure to the manufacturer’s specification. If you smellā gas, seeā sootor the dryer behaves abnormally, stop using it āand have a service technician inspect it.
Will installing the WE25M87 kit affect my warranty or appliance ā£certifications?
using the āmanufacturer’s approved conversion kit and havingā£ conversion performed per GEā¢ instructions by an authorized technicianā generally preserves ā¢the appliance’s certification and warranty. If conversion is doneā¤ incorrectlyā¤ or ā£with nonāapproved parts or by an unqualified person, āit can ā£void the warranty and create safety/code ā¤issues.Always retain proof of parts and service for warranty records.
The Way Forward
The ā¤WE25M87 āLP conversion kit for GE laundry appliances serves an vital role in adapting a ā¢unit to operate safely and efficiently on ā¢liquid propane fuel where natural gasā is not available. Byā£ providing theā£ specific components and āadjustments specified by the manufacturer, the kit helps ensure correct fuel delivery, combustionā£ characteristicsand appliance performance when the conversionā is performed ā£accordingā to the originalā¢ equipment ā£manufacturer’s guidelines and applicable codes.
Proper diagnosis and ātimely āreplacementā ofā¤ wornā or incompatible āparts āare essential to maintainā¢ safety,reliability,and warranty compliance.ā¤ Any decision toā£ convert fuelā£ typeā or toā£ replace conversion components shouldā£ beā based ā¢on an accurate assessment of the appliance’s condition and carried out by aā£ qualified technician āusing approved parts andā¤ procedures. Following ā¢professional ā¤diagnosis, correct installation, ā£and post-conversion testing minimizes risks andā¤ helps preserve the appliance’s long-term performance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
