137311900 Frigidaire âWasher Pump is a motor-driven pump⤠assembly designed for use âin Frigidaire residentialâ washing⣠machines. Asâ a compact electromechanical component, it typically includes an electric motor, impeller, housing with inlet and outlet portsand electrical connectors âor a wiring harness. the part isâ intended as a replacement⢠pump for the washer’sâ drainage system and âisâ manufactured to match the form, fitand function required by â¤those appliance models.
Inside the appliance, the âpump’s primary role is to evacuate⣠wash âand rinse water from the tub and âdirect it into the household drain âŁduring drain â¤and spin â˘cycles.It interfaces mechanically with â¤the tub drain and drainâ hose and electrically with the machine control board, door lock âinterlocks and anyâ water-level or flow sensing circuits. Proper operation of âthe pump isâ essential â˘for completingâ cycle â˘sequences,preventing âwater retention or overflow,and allowing the âwasher to â¤transition between wash,rinse and spin phases without error conditions caused by insufficient drainage.
In this article readers will find a technical âŁdescription of the pump’s function and construction, guidance on checking compatibility withâ specific â¤Frigidaireâ models, common failure symptoms toâ watch for (for example, no drain, persistent water in the tub, loud âor unusual noisesor leakage), practical troubleshooting and diagnosticâ checks âa technician can performand considerations for safe and âŁeffective replacement. Coverage will include electrical and⣠mechanical tests â¤to⣠isolate pump faults, typical âŁcausesâ of pump failureand installation notes to ensure âcorrectâ sealing, mounting and connector orientation when⤠fitting aâ replacement unit.
Table of Contents
- Function and Role of the Washer â¤Drain Pump in Frigidaire Laundry Systems
- how⢠the 137311900 Frigidaire Washer âŁPump Works Inside the âAppliance: âMotor,Impeller,and â˘Seal Dynamics
- Common Failure Symptomsâ and Performance Indicators of the Pump Assembly
- Replacement Considerations,Model âŁcompatibility,and Installation procedures⢠for the 137311900 Pump
- Q&A
- Closing Remarks
Function and â˘Role â˘of the Washer âDrain Pump in Frigidaire laundry Systems
The 137311900 Frigidaire Washer Pump is an electromechanical drain âpump assembly that evacuates wash water from theâ tub to the household drain. The pump uses a âsmall motor to drive â˘a molded impeller that⤠forces water â¤through the drain hose;⣠the washer’s main control board âsupplies power to the pump only⣠during drain and certain diagnostic cycles. In ânormalâ operation the âŁpump âwill run âfor âdefined drain intervals,⣠stop when the water âlevel sensor indicates empty or when the control logic completes⣠a drain stepand is designed with thermal âprotection and âmolded â˘mounts â˘to withstand⣠vibration and âintermittentâ runs typical of âlaundry cycles.
- Water fails to evacuate or slow draining
- Pump hums âbut impeller does not turn (possible jam)
- Continuous running or intermittent runs without completing drain
- Visible leakage at pump housing or â˘hose connections
| Item | Description |
|---|---|
| Electrical supply | Nominal 120 VAC on standardâ US models; driven by⢠washer control board âduring drain |
| Mount/connector | Snap-in â˘or bracket mount with⣠two-pin â¤power connector; verify harness âcompatibility⢠before replacement |
| Mechanicalâ features | Molded plastic impeller⢠and sealed⤠housing; designed to âpass small debris but susceptible to jamming by coins,⤠buttonsand âŁfibrous lint |
For service, inspect the â˘pump â¤impeller for obstructions and verify voltage is present at âthe â˘pump terminals during âŁa drain command; âŁif supply voltage appears andâ the impeller is free⤠but the motor does not turn, replacement of the assembly is appropriate. When fitting a replacement⣠suchâ as the 137311900 Frigidaireâ Washerâ Pump, â˘confirm matching mounting points, connector⢠type,â and âŁdrain⤠hose orientation; also check adjacent components (drain hose, tub outlet, â˘and water level sensing) because â˘restrictions or control faultsâ can mimic pump failure. Practical field checks include âspinning the impeller by hand to confirm freedom of movement, checking for leaks at â¤the gasketand monitoring current draw or control board output to isolate electrical⣠versus mechanical faults.
How the 137311900 Frigidaire â˘Washer Pump Works Inside the âAppliance: Motor, â˘impellerand Seal Dynamics
The 137311900 Frigidaire⤠Washer Pump uses a compact â¤singleâspeed electric motor âdirectly coupled to âa âmolded centrifugal impeller to evacuate wash water through â˘the drain path. The motor⢠produces rotational torque at a fixed speed,and theâ impeller⢠converts that rotationâ into radial flow; this arrangement yields reliable flow rates for standard drain cycles while âkeeping the assembly compact and serviceable.A mechanical shaft seal and rubber elastomericâ components isolate the motor windings from⢠the pumped water-this âseal interface â¤is â˘the primary water-retention element and is designed to âtolerate the typical particulate load âfound âin householdâ laundry applications. The pump isâ supplied as an OEM replacement for matching Frigidaire models and is engineered to mate with the factory housing, â¤drain⣠hoseand âelectrical connector patterns used onâ those machines.
The operational â˘behavior becomes apparent during diagnostics: âŁa worn or clogged ⣠impeller âreduces⤠flowâ and causes âthe motor to drawâ higher âcurrent and hum, while a compromised seal typically presents as external âleaks, corrosion on⤠the motor bodyor âsudden â¤motor failure after water intrusion. Practical troubleshooting steps for technicians include checking for trapped debris at the impeller inlet,measuring⣠motor resistance and current during a⣠drain cycle,and âverifying free impeller rotation by hand withâ power removed. â¤Common field symptoms and inspection checkpoints include:
- Humming â¤without flow – suggests jammed impeller or high⤠current draw.
- Slow or âincomplete drainage – indicates partial blockage or impeller wear.
- Visible leaks or rust at the pump âbody⢠– points â¤to seal failure.
- Intermittent operation – may be electrical⤠connector or motor winding⢠issues.
| Item | Description |
|---|---|
| motor | Compact singleâspeed electric motor, directâcoupled to impeller for drain cycles. |
| Impeller | Molded centrifugal vanes (typically plastic)⤠that produceâ radial⤠flow; sensitive to lint andâ debris. |
| Seal | Mechanical elastomer/faceâ seal at the shaft to prevent waterâ ingress â˘into motor cavity. |
Commonâ Failure Symptoms â˘and Performanceâ Indicators of the Pump Assembly
The 137311900 Frigidaire Washer Pump is the drain assembly âresponsible for evacuating wash water at âthe end of fill and during spin cycles; it combines â˘a⤠small motor, impeller andâ housing tailored to the â¤washer’s plumbing and electrical interface. Functionally, the pump must provide a sudden high-flow discharge â¤while resisting brief dry-run and debrisâ exposure. Common mechanical and electrical âbehaviors that indicate degradation include increased rotational friction (bearing âŁor âdebris contact), loss⢠of⣠hydraulic performance⤠(wornâ or â¤broken impeller vanes), water ingress intoâ the motor housing (failed seals)and intermittent electrical faults âdue âŁto winding damage or connector corrosion. These failure modes â¤change measurable outputs – reduced flow rate, elevated motorâ currentor abnormal acoustic signatures – and can also present as symptoms that mimic control board or door-interlock faults on compatible Frigidaire models.
- Slow or incomplete drain resulting â˘in standing water or â¤failed spin.
- Loud grinding, rattlingor â˘high-pitched whine during the drain cycle.
- Humming⣠motor with no water movement (motor energized but impeller stalled).
- Visible leakage at the pump housing or electrical connector.
- Tripped circuit protection or blown fuses â¤correlated to pump activation.
Technically useful diagnostics include visual inspection for âforeign objects in the pump trap, measuring continuity and insulation resistance of⢠the pump motor windingsand verifying⣠that the â˘correct supply voltage is present atâ theâ pump connectorâ during the drain phase. If voltage â˘isâ presentâ and the impeller does not rotate â¤freely,â the fault is mechanical (jammed debris,â seized bearings or broken impeller) or the motor has internal⤠damage; if no voltage is supplied, the⤠issue is upstream âŁ(control,â door/lid switch, harness). Use a clamp meter to compare inrush andâ running current against the service specification for the washer⤠model; abnormallyâ highâ running current⢠with slow rotation indicates mechanical binding, while an open winding or zero currentâ indicates electrical failure. Confirm compatibility âand âfitment of replacement pumps against⢠the appliance model number before⣠installation,and clear evidence such asâ persistentâ leaks or insulation failure generally warrants pump replacement rather than repair.
| Item | Description |
|---|---|
| Slow drain | Partial â˘clog, worn impelleror restriction in discharge hose âŁreducingâ flow rate |
| Humming without flow | Motor energized but âimpeller âstalled due to jam, seized bearings, â˘or broken coupling |
| Leakage | Damaged housing seal or⤠cracks permitting water ingress and potential â¤electrical damage |
Replacement Considerations,â model Compatibilityand Installation Procedures for the 137311900⣠Pump
The 137311900â Frigidaire Washer Pump âŁis a motor-driven drain âassembly that removes wash â¤and rinse water from theâ tub by forcing âŁfluid through the outlet hose and drain system. The unit consists â˘of a⢠small AC motor,⣠an impeller, sealsand a molded housing that interfaces with the washer’s⤠waterway and electrical harness. Operational behavior includes timed drain cycles â˘during spin and occasional brief operation to clear residual water; common failure modes are clogged impeller passages, worn shaft⢠seals leading to leakageor electrical failure of the motor windings. â˘Verify compatibility by matching theâ OEM part number to the washer’s model and service manual and âchecking three physical details: electrical connector type â¤(2-pin, 3-pinor sealed plug), mountingâ flange â˘style (screw-on, clip-in)and outlet â˘hose âŁinner diameter (typically⤠aboutâ 1 in / 25 mm). Replacement requires selecting a âŁpump with the same mechanical interfaces and electrical âcharacteristics rather âthan relying solely on visual similarity.
Follow a controlled, documented installation and test procedure to ensure reliableâ operation and avoid secondary damage. Before starting, disconnect power and close the waterâ supply; drain âresidual water using a bucket or âthe access drain port. During installation, label âor photograph each electrical connector and hose â˘position⢠to preserveâ pinout and routing, replace any corroded â˘clamps or brittle hosesand inspect the sump and trap for⣠debris that can cause repeat failure. After mounting the⤠replacement pump and restoring connections, run a drain cycle â˘while â¤monitoring for âleaks, unusual vibrationor motor noise; verify âmotor⣠continuity with âa multimeter and compare behavior to the manufacturer’s â¤service âŁlimits if available. For safety and longevity, torque âfasteners to the washer manufacturer’s specifications and ensure hose clamps compress â¤evenly to prevent leaks.
- Pre-install checks: confirm OEM part number, connector pinout, mounting flangeand hose ID.
- Requiredâ tools: basic hand tools, pliers for â¤clamps, multimeterand bucket for residualâ water.
- Common diagnostics: check for obstructions, measure âwinding continuityand inspect seals for leakage.
- Post-install tests: run a drain cycle, inspect for leaksand listen âŁfor abnormal motor noise or excessive vibration.
| Item | Description |
|---|---|
| Voltage | Typically mainsâ AC (verify washer service manual for âexact rating) |
| Connector | 2â or 3âpin harness or sealed⢠plug; confirm pinout beforeâ swapping |
| Hose ID | Approximately 25 mm (1 in); match âoutlet hose diameter and clamp style |
| Mounting | Screw-on or clip-in â¤flange;â ensure mechanical⣠fit and gasket/seal seating |
Q&A
What is the Frigidaire part 137311900?
Part 137311900⤠is the drain pump assembly used on a range of âFrigidaire washing machines. It contains the pump motor and impeller that⤠evacuate water from the washer tubâ through the drain hose. Always confirm⢠compatibility by checking your âwasher model number or the part lookup in the service manual or parts diagram.
What are the common symptoms that 137311900 hasâ failed?
Typical signs of a failed drain pump include: washer won’t drain or takes very â˘long to drain, water remains in the tub after âŁa cycle,⢠loud grinding or âhumming noises during drain, leaks coming from the pump⢠area,â and washer âŁerror â¤codes relatedâ to draining âor water level. sometiems the problem is a clogged hose or âcoin trap rather than â˘the pump itself.
How âcan â˘I test whether the pump is â˘badâ before⢠replacing it?
First, remove any visible debris fromâ the âpumpâ inlet or coinâ trap.Check the drain hose for clogs. If âthe problem persists, unplug the washer and access the pump wiring harness-use aâ multimeter to check for⣠continuity across âthe â˘pump motor âterminals (no open circuit). If you’re pleasant and the design allows,you can briefly apply the proper supply â¤voltage to the pump to â¤see⢠if it runs,but⢠that should only be done by a qualified âtechnician.Also listen⢠for âŁmotor âŁhum (may indicate jammed impeller) or no âsound at all (possible electrical failure).
How doâ I replace â˘the â¤137311900â pump – what are the⢠basic steps and safety precautions?
Basic replacement steps: unplug⢠the⤠washer and turnâ off water supply; drain any water âremaining in the tub and disconnect the drain hose; access the pump â(usually behind a lower front panel or rear access panel); note or photograph wiring âŁand hose â˘connections, then disconnect harnessâ and hoses and remove mounting âfasteners; install the new pump, reconnect hoses âand wiring,⢠reassemble panelsandâ test with a short drain cycle.⣠Safety: always disconnect⤠mains âŁpower before âworking on the appliance, have towels or a bucket handy for spilled waterandâ if unsure about electrical work, hire a technician.
Is 137311900 an OEM partand can I use aftermarket⣠pumps?
137311900 is an OEM Frigidaire part number. Aftermarket pumps may work and⤠sometimes⣠cost less, butâ quality, fitand â¤connector/hose alignmentâ can vary. â¤For reliable âfit and warranty coverage, OEM â˘is ârecommended. If using aftermarket parts, verify electrical â˘connector type, mountingâ locationand drain hose attachment beforeâ installation.
What tools are typically needed to replace this pump?
Common tools: flathead⢠and Phillips screwdrivers, nut drivers or socket set (often 1/4″ to 5/16″â or 8mm),â pliers for hose clamps, towelsâ or âŁa shallow pan to catch waterand a multimeter for testing. Depending on the model, you may also need a putty knife to release trim clips or specialty tools to remove the âcabinet.
Can I repair theâ pump (e.g., clear debris) ârather of replacing âit?
Frequently⢠enough a clogged impeller⢠or foreign⢠objectâ can be cleared â˘and ârestore function. Remove theâ pump or access the coin trap, clear debrisand inspect the impeller for damage.If the motor hums â˘but the impeller is free,debris âremovalâ can be sufficient.â If the impeller⢠or motor bearings are damaged or the motorâ has an open âŁcircuit, replacement is required.
How much does replacement typically cost including parts and labor?
Part-onlyâ prices vary by seller and region, âbut OEM drain pumps commonly range from about $30 to $100. Labor for diagnosis and replacementâ by a technician varies â˘widely-typically $50 to $200 depending⣠on service rates and complexity. For a more accurate estimate, get quotes from âlocal appliance ârepair⣠services âand check current part prices for your⢠specific model.
Closing Remarks
The 137311900 Frigidaire âwasher pump is a key component in a washing âŁmachine’s drainage system, responsible for removing water âefficiently at the end of each cycle and helping maintain proper wash performance. Its⤠reliable operation supports cycle âtiming, prevents water retention that⢠can lead to mold âor odorsand contributes to overall applianceâ longevity â¤and energy efficiency. Becauseâ the pump directly affects routine functionality,its condition plays an⢠crucial⢠role in user â¤satisfaction and applianceâ reliability.
accurateâ diagnosis is essential before âdecidingâ on repair or replacement.Symptoms such as unusual noises,â persistent⣠water not draining, âvisible leaks, âor error codes can indicate â˘pump failure, blockageor â¤related electrical issues. Careful troubleshooting-combining âŁvisual inspection, exclusion of simple causes (kinks, clogs),â and, when appropriate, professional testing-helps ensure theâ right corrective action is taken and avoids unnecessary parts replacement or expense.
When diagnosis shows the pump â˘is faulty,â timely replacement withâ the correct part, such as the 137311900 Frigidaire washer pump, restores normal operation and reduces the risk of further damage. Proper installation, adherence to safety precautions, â¤and consideration âof warranty or⣠service options will help achieve a durable repair. For âusers âwhoâ areâ uncertain about âŁdiagnosis or installation, consulting a qualified⣠technician is a⤠prudent and professional approach.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
