5303935067 Frigidaire âŁRange Flat Oven ignitor 3-1/4″ is a flat hot-surface (glow) ignitor⢠designed for âuse in Frigidaire gas ranges; it is a replaceable oven burner âignitionâ element whose⣠physical length,mounting configuration and electrical connections âŁare specified to match the oven â¤burner assembly.The component is a high-temperatureâ resistive elementâ enclosed inâ a heat-resistant substrate and housing, â¤intended⣠to reach a redâhot⢠temperature quickly to provide the thermal âenergy required to ignite the main oven âburner.
Inside the appliance the âignitorâ serves bothâ as the ignition source âŁand as an integral part â¤of⣠the gas-safety âcircuit: when⣠powered it â˘heats to a specified operating temperature and draws theâ current necessary for the gas valve control circuit to â¤allow â˘fuel flow to the burner. It interfaces electrically with the oven control and â¤gas valveand mechanically⢠with⤠the burner âbox and mountingâ brackets; â˘it is exposed âto combustion byproducts and repeated thermal âcycling, which are⢠primary â˘factors â¤in end-of-life failure. Its electrical characteristics (operating voltage, current drawand cold resistance), connector type and physical dimensionsâ determine âcompatibility and safe operationâ within theâ appliance system.
In this article readers willâ find a technical overview of the 5303935067⤠ignitor covering its functional role, the critical specifications that⢠determine compatibility with specific Frigidaireâ models, common failure â˘symptoms⣠(no glow, slow heat-up,â extended âŁignition timeor safety lockouts), diagnostic checks commonly used by technicians â˘andâ appliance owners (visual inspection, resistance and â˘current measurementsand verification of control voltage)and practical replacement âŁconsiderations suchâ as matching length, mounting⤠style,â connector type and rated electrical characteristics.Theâ goal is âto provide the technical context needed to â˘evaluate âperformance,identify likelyâ failure modes,and select an appropriate replacement while observing standard safety and service practices.
Table of Contents
- Function and Role of the Flat Oven Ignitor in Frigidaire Range Heating Systems
- How the 5303935067 Frigidaire Range Flat Oven Ignitorâ 3-1/4″ Operates Within the Oven’s Ignition circuit
- Common⣠Failure Modes and Diagnostic Symptoms of a Faulty flat âOven âIgnitor
- Compatibility,Replacement âConsiderations,and Troubleshootingâ Procedures for 5303935067 Frigidaire Ignitor
- Q&A
- To Wrap It Up
Function â¤and Role âof the Flat Oven Ignitor in Frigidaire Range Heating Systems
The 5303935067 Frigidaire⢠Range Flat oven Ignitor 3-1/4″ is a â¤flat,resistive heating element engineered⤠to reach a specific operating temperature quickly so the oven’s gas safety valve can open andâ allow combustion. In technical terms⣠the ignitor⤠functions⢠as âaâ current-limiting heater: when⤠energized it must glow hot enough and draw the required coil âŁcurrent to permitâ the gas valve to actuate. Performance âcharacteristics âtechnicians⢠watchâ for are glow intensity and warm-up â˘time; â¤a dim⤠or slow-glowing âŁignitor will not permit sufficient âvalve current even though âit⣠may still⤠show continuityâ onâ a meter, âso visual behavior under â¤power is as important as electrical checks for correct âoperation and compatibility with the oven’s âcontrol sequence.
Compatibilityâ depends â¤on âphysical dimensions, mounting flange geometryand connector⣠type – the specified 3-1/4″ length â˘should âmatch the⣠oven’s bracket clearance and â¤harness reach to ensure correct flame timing and safe seating. Practical service checks⤠include âconfirming the replacement matches the original’s âwire terminals and bracket, observing the ignitor during a call for âheat to â¤verify prompt, even glowand replacing the unit if glowâ is weak or ignition cycles fail repeatedly. Common service considerations and checks are summarized below.
- No flame or⤠repeated ignition attemptsâ (weak or⣠delayed âglow)
- Verify physical length, mounting tabsand two-wireâ connector match
- Observeâ glow under power and confirm electrical continuity before replacement
| Item | Description |
|---|---|
| Part | 5303935067 Frigidaire Range Flat Oven Ignitor 3-1/4″ |
| Function | Resistive glide-typeâ ignitor that heats to enable gas valve opening |
| Key dimension | 3-1/4″ nominal face-to-face âŁlength; verify against⤠ovenâ bracket |
| Service⢠indicators | Slow/dim glow, âextended preheatorâ no flame despite valve actuation signal |
How the 5303935067 Frigidaire Range âŁFlat Oven Ignitor 3-1/4″ âŁOperates Within theâ Oven’s Ignition Circuit
The 5303935067 Frigidaire Range Flatâ Oven Ignitor 3-1/4″ is âa hot-surfaceâ ignitor designed toâ be the current-carrying element in a gas oven’s ignition circuit.â When the range controller applies voltage, this flat⣠ceramic/metal element heatsâ until it emits visible orange glow; â¤at âthat point the oven control energizes the gas âsafety valve and gas flows to the burner where the glowing surface ignites âthe mixture. Compatibility depends on the ignitor’s mounting style, lead lengthand connector type-the⤠3-1/4″ nominal âlength⢠refers â˘to the⣠element dimension that must match the oven’s bracket âand clearance.In practical service, technicians replace this âpart when an ovenâ exhibits long glow times before flame, intermittentâ ignitionor âno⤠gas flow with a visibly intact valve, since a physically similar ignitor withâ mismatched length or connector can fit but still fail electrically orâ mechanicallyâ in the circuit.
Electrically, the ignitor â˘behaves as aâ resistive heating element: a cold resistance measurement (ohms) and an⣠in-circuit current draw at â120â V are the two primary diagnostics. Typical cold-resistance⢠values for flat oven ignitors frequently enough fall into aâ modest tens-of-ohms range and corresponding operating current during â¤theâ glow âphase is commonly in the low amperes; a value⤠significantly higher or an open circuit⤠indicates a degraded âŁor â˘failed element. Common failure modes include cracked ceramic, â˘internal open⢠circuitor âresistance drift causing slow warm-up; these produce symptoms such as extended pre-ignition glow â¤times or the oven âcontroller cycling without lighting. Use a multimeter to check cold resistance and, when âŁsafe and competent⢠to âdoâ so, measureâ current under power to âconfirm⤠the ignitor draws sufficient amperage to satisfy the oven’s gas valve interlock.
- Ignition sequence: control applies voltage â ignitor âglows â gas valve energized ââ flame established.
- Common symptoms âof failure: long glow time, no ignitionor âoven cycling without heating.
- Quick tests: cold-resistance check and an amp âŁdraw measurement under⢠operating voltage.
| Item | Description |
|---|---|
| Part | 5303935067 Frigidaire range â¤Flat Oven Ignitor 3-1/4″ |
| Nominal element length | 3-1/4″ â(matching bracket clearance) |
| Typical cold resistance | Roughly tens of ohmsâ (model-dependent) |
| Operating behavior | Resistive heating â˘element that âglows and allows gas valve sequencing |
Common Failure Modes and Diagnostic⤠Symptoms of a Faulty â¤Flat Oven Ignitor
The flat oven⣠ignitor in a gas range converts electrical energy into heat to⤠thermallyâ open⢠the âgas âŁvalve;⢠the 5303935067 Frigidaireâ Range⤠Flat Oven Ignitor 3-1/4″â is a replacement hot-surface type⢠designed to fit specific Frigidaire range models where a short, flat element is required.Functionally, a âhealthy ignitor must reach a luminous, consistent glow and draw âŁsufficient âcurrent to allow the safety gas valve to energize. â˘Physical fit and lead routing matter: the 3-1/4″ elementâ length⢠and mountingâ tabs âŁdetermine alignment with the gas ports and the safe distance fromâ surrounding metal, so a âŁmismatched ignitor⣠can exhibit the same symptoms as a failing unit even if â¤the element âŁitself is â¤electrically sound.
Diagnostic â¤work focuses on corroborating observed symptoms with simple electrical and visual checks before replacing the ignitor. Visually inspect for cracks, blisteringor a blackened coating that reduces emission; use a clamp ammeter to measure current âdraw at start-up or a multimeter to check continuity-an open circuit indicates a failed element, while a significantly reduced current draw⢠under load indicates aging.â For practical troubleshooting, verify the gas valve coil âand controlâ sequence as⤠well: an⢠ignitor that glows but never âŁopens âthe âvalve⤠suggests either insufficient âcurrent or a separate valve/control fault. Always disconnect power and gas before performing âelectricalâ measurements or removing the â˘ignitor;â if measurements areâ borderline,comparing readings to⣠a known-good unit or consulting theâ appliance’s service âdata will help â˘determine whether replacement is warranted.
- Oven fails to ignite but ignitor glows âfaintly or not at all.
- Ignitor glows for â¤an âŁunusually long time âbefore âgas flows âorâ never allows valve to open.
- Visible cracks, flakingor a darkened surface onâ the ceramic/filament.
- Open â˘circuit or abnormally âlow current â¤draw â¤on multimeter/clamp ammeter testing.
- Intermittent âŁoperation correlated with⣠vibration or thermal cycles.
| Item | Description |
|---|---|
| Glow behavior | Should reach âa⢠bright, even glow shortlyâ after power â˘is applied; faint or delayed glow indicates reduced emissivity orâ internal damage. |
| Electrical check | Continuity confirms⢠filament integrity; significantly reduced â¤current⤠under âload indicates aging even if continuity exists. |
| Mechanical fit | Length, tab position, âŁand â˘lead routing affect alignmentâ with the gas ports-incorrect â˘fit can mimic failure symptoms. |
Compatibility, Replacement Considerationsand Troubleshooting Procedures for 5303935067⢠Frigidaire⤠Ignitor
the 5303935067 Frigidaire Range âFlat â¤Oven Ignitor 3-1/4″⢠is a glow-style ignitor designed to reach a âspecific temperature âand current draw that allows the â¤oven gas valve to⣠openâ reliably. In operation this flat âŁceramic-and-filament assembly must present continuity and heat visibly; a properly functioning ignitor will glow bright orange-white and sustain the current necessary for valve actuation. Compatibility is persistent by⤠physical dimensions (the 3-1/4″ plate length and mounting hole spacing), terminal type and wire lead lengthâ – theseâ mechanical andâ electrical â˘attributesâ determine interchangeability âŁbetween Frigidaireâ ranges and other âmodels âŁthat use the same OEM part ânumber. Confirm the âŁpart number, â¤bracket orientationand connector style before⣠installation to avoid mismatches âthat can cause poor seating, âarcingor premature failure.
Replacementâ andâ troubleshooting focus âon verifying continuity, â¤inspecting for cracks or flaking ceramicand confirming the â˘ignitor draws sufficient current under âcall-for-heat; common symptoms âthat indicate replacement are⢠no ignition, long glow time before gas release, âor a dim glowâ compared â¤with a known-good ignitor. Basic diagnostic steps include a visual inspection with power removed,â a continuity check with a multimeterand,⣠if safe and qualified personnel âare available, a live measurement âof current or observation of the glow during an⢠ignition cycle; if the unit is open-circuit,â crackedor noticeably â¤underpowered compared to⢠specification, âreplace âitâ and match the mounting and connector details. Practical⢠examples: swapping âin a visuallyâ identical 3-1/4″ âŁflat ignitor without matching the terminal â˘style canâ leave you with an incompatible harness, âŁand replacing with the correct â5303935067⤠part restores expected ignition timing andâ preheat performance.
- Visual check:⢠look âŁfor cracked ceramic, spallingor burn marks â¤on terminals.
- Continuity: test with power disconnected;â an⢠open âcircuit â˘indicates failure.
- Operational âcheck: observe glow intensity; a weak glow often means âinsufficient current â˘draw.
- fitment: âverify length, mounting holesand connector type before installation.
| Item | Description |
|---|---|
| Length | 3-1/4″ flat ignitor plate â˘- â¤verify⢠mounting hole spacing |
| Common failure⣠symptoms | No ignition, extended preheat time, dim glow |
| Installation notes | Match bracket orientation and terminal/plugâ type; disconnect power andâ gas âbefore â˘service |
Q&A
What is the 5303935067 Frigidaire Range Flat oven Ignitor andâ what does the “3-1/4″”⤠mean?
The 5303935067 is a replacement hot-surface (glow) â˘ignitor designed⤠for certain âFrigidaire ranges and some compatible models from other brands.”3-1/4″” refers to the length of the flat ignitor â¤element (the⣠ceramic/glass heating⤠surface) and is used to identify the correct physical size and fit for your oven’s mounting bracket.
How do âIâ know if the ignitor is bad and needs to be replaced?
Common signs of a⤠failing oven ignitor are: the oven takes a long time to light,â the oven âwon’t light atâ all, the bake burner does not stay lit,⢠or the â¤ignitor glows but the burner never opens. A weak âŁignitor may⣠glow⣠dimly or take much longer to reach operating temperatureâ and therefore cannot draw enough current to open âŁthe gas safety valve.
How can I test this ignitor to confirm it’s faulty?
two â˘commonâ tests: (1) Multimeter resistance test:â with âpower off and ignitor âdisconnected, measure⢠resistance across the âignitor leads. A good hot-surface ignitor typically shows low resistance (tens to a⤠few âhundred ohms)â rather â˘than open/infinite. â(2) Amperageâ (load) test:⣠with âthe oven calling for heat, measure amp draw of the ignitor in-circuit – a healthy ignitor commonly draws â¤roughly â¤2-4 amps when hot; a significantly lower current usually indicatesâ weakness.⤠The amperage test âŁis the most definitive because an ignitor â˘can show resistance yetâ still fail âunder load.
Is this ignitor â˘compatible with my Frigidaire or Kenmore range?
Compatibility depends on the oven model â¤and the âignitor’s âphysicalâ mounting,connectorâ type,and length (3-1/4″).Always check your appliance model number against the part number fit⤠list provided by the sellerâ or manufacturer. If uncertain, compare the old ignitor’s mounting holes, terminal connector styleand element length to ensure a match.
Can I replace the ignitor âmyself, â¤and what âsafety precautions should⤠I take?
Many â¤homeowners with⤠basic mechanical skills â˘can âreplace an ovenâ ignitor. Safety steps: disconnect electrical power at the breaker,turn off the gasâ supply,allow the oven âto cool,and âhandle the ignitor carefully âŁ(theâ ceramic/film surface is fragile). avoid touchingâ the âheating surface with bare hands. â¤If you’re not comfortable⢠working⢠with⣠gas or wiring,â hireâ a qualified technician.
How long does a replacement ignitor typically last?
Lifespan⤠varies with use and conditions but generally ranges from several years to over a decade. â˘Heavy use, power surgesand repeated thermal cycling shorten âŁlife. Ifâ your oven is â˘older or the ignitorâ has been cycling on/off frequently, earlier failure⣠is more likely.
Do I need to replace any gaskets or other parts when I change the ignitor?
Not always, butâ check the mountingâ gasket or bracket condition when you âremove⢠the old ignitor.â if â¤the mounting gasket âis damaged or the bracket is corroded, replace âthem for a â¤secure,⣠gas-tight fit. Alsoâ inspect the wiring harness âŁand connector; damaged connectors â¤shouldâ be replacedâ to ensure a reliable â˘electrical connection.
Is⢠this part for a gas or electric âoven,â and willâ it work with all gas ovens?
This is a hot-surface ignitor for gas⤠ovensâ onylâ (it heatsâ to âŁignite the gas). It is indeed not â¤usedâ in electric ovens. Even among gas âŁovens, ignitor designs vary (shape, â¤length, mountingand connector), soâ this 3-1/4″ âflat ignitor will only fit ovens that use that specific style and size. Verify compatibility âŁbefore⢠purchase.
To Wrapâ It Up
The 5303935067 Frigidaire Range Flat âOven Ignitor 3-1/4″ is â¤aâ critical component that initiates the gas flow and ensures reliable ignitionâ in compatibleâ Frigidaire ovens. As the part âresponsibleâ for producing the heat requiredâ for⤠consistent baking and roasting, a properly functioning ignitor directly affects oven performance, energy efficiencyand user safety. â˘Replacing a worn⢠or failing ignitor âŁwith the â¤correct 5303935067 unit âŁhelps restore âŁconsistent temperature control and dependable operation.
Because âsymptoms of a bad ignitorâ canâ resemble âother â¤appliance issues,accurate diagnosis-using safe âtesting methods or consultation with a qualified technician-is essential before ordering⤠replacement parts. When replacement is necessary, â˘selecting the exact â5303935067⢠Frigidaire Range Flat Ovenâ Ignitor 3-1/4″ and following manufacturer installationâ and safety guidelines will ensure proper fit,â functionand long-term reliability. Routine inspection and prompt replacement ofâ failing components â¤help⢠maintain performance and reduce the risk of more significant repairs.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
