241860810 frigidaire Refrigerator Ice Container Assembly is a replaceable refrigerator component that comprises the ice storage bin and its immediate mechanical interfaces used with Frigidaire automatic ice-making and dispensing systems. As an assembled part it typically includes the molded storage hopper, mounting points for the ice-dispensing auger or chuteand provisions for sensors or actuation linkages as required by the specific refrigerator model. The assembly is designed to receive ice from the ice maker, retain it at low temperature, and present it for dispensing or internal use without obstructing production.
Functionally, the ice container assembly serves as the mechanical and, in some configurations, the electrical interface between the ice-maker module and the user-facing dispenser or interior bin. It interacts directly with the ice maker head (ice drop location), the auger motor or manual release mechanism, door or interior sensors that detect “bin full” or “bin present,” and any surrounding insulation or defrost drainage paths. Proper alignment, clearances and sealing are important to prevent jamming, ice bridgingor water leakage; were the assembly includes motorized components it also requires correct electrical connections and torque limits to function reliably within the refrigeration and control systems.
This article will describe the ice container’s functional design and typical model compatibility, identify common failure modes and symptoms (for example, ice bridging, auger stalling, sensor faultsor leakage), outline diagnostic checks a technician or informed appliance owner can performand summarize replacement considerations such as fitment, necessary tools, handling precautionsand post-installation verification steps. the goal is to give practical technical context that supports accurate troubleshooting, safe replacementand integration with the refrigerator’s ice production and dispensing systems.
Table of Contents
- Functional Role and Design Specifications of the 241860810 Frigidaire Refrigerator Ice Container Assembly
- How the 241860810 Frigidaire Refrigerator Ice Container Assembly Works Inside the Appliance: Internal Components and Ice Management Workflow
- Common Failure Symptoms and Diagnostic Indicators of Ice Container assembly Malfunctions
- Compatibility, Model Fitment, Replacement Procedures and Troubleshooting steps for the Ice Container Assembly
- Q&A
- The Conclusion
Functional Role and Design Specifications of the 241860810 Frigidaire Refrigerator Ice Container Assembly
The 241860810 Frigidaire Refrigerator Ice Container Assembly functions as the primary collection and staging container for ice produced by the icemaker. It is a rigid molded housing that positions directly beneath the ice mold and guides cubes into a storage bin or dispenser interface while protecting the icemaker fill and harvest mechanisms from mechanical interference. The assembly incorporates alignment tabs, mounting bosses and a discharge opening designed to mate with the refrigerator’s dispenser chute or auger assembly on models that dispense ice, and may include a small drain or channel to prevent pooled meltwater from contacting electrical components. When replacing this assembly, verify that the part’s mounting geometry and discharge orientation match the refrigerator’s keyed rails and actuator linkages to avoid feed jams or sensor misalignment.
In normal operation the container’s internal shape controls ice flow to minimize bridging and jamming; tho, environmental and user factors such as freezer temperature fluctuations, frequent door openings, or crushed/partially thawed ice can cause clumping at the discharge area. Technicians should inspect the seating surfaces, engagement hooks and any integrated gate or lever for wear or deformation during diagnostics. Practical checks include removing the bin to visually inspect for cracked walls, obstructions at the outletand proper clearance to the icemaker stirrer or auger. For routine service, clean the bin with mild detergent and verify that components engage smoothly when the bin is reinstalled; if ice delivery or dispensing fails after these checks, confirm actuator alignment and run a controlled harvest cycle to observe ice ejection behavior.
- Primary features: molded housing, mounting tabs, discharge opening, optional drain channel.
- Common failure modes: discharge jams from bridged ice, cracked bin walls, misaligned mounting tabs, worn or stuck gate/lever.
- Troubleshooting tip: remove and manually cycle the bin to check clearance and gate/auger engagement.
| Item | Description |
|---|---|
| Material | Durable molded thermoplastic (typical ABS or similar) resistant to low-temperature brittleness |
| Function | Receive ice from icemaker, storeand deliver to dispenser or door interface |
| Mounting | Keyed tabs and slide bosses to match specific refrigerator frame geometry; confirm before replacement |
| Compatibility | Used as an OEM replacement for designated Frigidaire models; verify part number and fridge model for fit |
How the 241860810 Frigidaire Refrigerator Ice Container Assembly Works Inside the Appliance: Internal Components and Ice Management Workflow
The 241860810 Frigidaire Refrigerator Ice Container Assembly is a molded ice storage and delivery component that collects frozen cubes from the icemaker, holds them at freezer temperatureand presents them to either an internal compartment or a door-mounted dispenser. Internally the assembly typically comprises the ice bin, a drive interface (auger or paddle coupling), mounting tabs and alignment railsand a small drain or melt channel; some refrigerator models also use a mechanical float or electronic sensor that signals the icemaker to pause production when the bin reaches capacity. Compatibility depends on the bin geometry and drive-coupler design-replacing this assembly requires matching the part number to the refrigerator model or verifying that the mounting features and auger engagement match the original to avoid fit and drive issues.
The operational workflow begins when harvested ice drops from the icemaker into the container, where it accumulates until the capacity sensor interrupts icemaker cycles. When ice is demanded through the dispenser, the refrigerator’s auger or paddle drive engages the bin’s coupling, conveying ice through the chute; correct seating of the bin is required for the coupling teeth to mesh and for the sensor actuator to register bin presence. Practical diagnostic checks include observing whether the dispenser motor stalls (suggesting a stripped coupling), ice clumping or melting (indicating temperature, door-sealor drainage problems)and leaks or frost build-up around the container (pointing to cracked plastic or misalignment).
- Common symptoms and checks: ice clumping, dispenser grinding, bin not seating, sensor not triggeringand visible cracks or meltwater.
| Item | Description |
|---|---|
| ice bin | Molded storage cavity that contains ice and directs it to the outlet chute. |
| Agitator/auger interface | Coupling point where the dispenser motor transfers torque to move ice; requires precise alignment. |
| Capacity sensor / actuator | Mechanical float or switch that signals the icemaker to stop when bin is full. |
Common Failure Symptoms and Diagnostic Indicators of Ice Container Assembly Malfunctions
The 241860810 frigidaire Refrigerator Ice Container Assembly functions as the intermediate storage and delivery interface between the icemaker and the dispenser or internal access bin. Mechanically,the assembly must align with the refrigerator’s mounting rails,engage any integrated drive or auger features,and maintain a light seal to limit airflow and frost migration; electrical interfaces may include a low-ice sensor or switch. Compatibility requires matching the container geometry, mounting pointsand sensor connectors to the specific Frigidaire chassis-incorrect fitment commonly causes misalignment of the auger or prevents the sensor from actuating even when the ice level is adequate.
- Ice jams: Visible blockage or irregular-shaped ice indicating hopper geometry damage or a misaligned auger shaft.
- Intermittent or no dispensing: Actuator not engaging due to broken teeth on the auger coupling, stripped drive, or a failed sensor/switch.
- Excess frost or wet ice: Seal failure or cracked housing allowing warm, moist air into the container.
- Unusual noise: Excessive grinding or clunking from worn bearings or debris in the auger path.
- Electrical faults: Open/shorted sensor circuits or inconsistent continuity at connector leads.
Diagnostic indicators begin with a visual inspection for cracks, deformationor foreign objects in the bin; manually rotating the auger (with power off) checks for smooth movement and engagement. use a multimeter to verify continuity of any sensors or switches and confirm voltages at the connector during a dispense cycle. A practical test sequence: remove the container, inspect for mechanical interference, manually operate the drive interfaceand then measure sensor response while simulating an ice level change. If the housing is cracked, mounting tabs are broken, or sensor outputs are outside expected ranges, replacement of the 241860810 assembly is typically the most reliable corrective action rather than attempting field repairs.
| Item | Description |
|---|---|
| Fitment | Match mounting tabs, electrical connectorand auger profile to the refrigerator model. |
| Swift test | Visual inspection, manual auger rotation, sensor continuity check with multimeter. |
Compatibility, Model Fitment, Replacement Procedures and Troubleshooting Steps for the Ice Container Assembly
the 241860810 Frigidaire Refrigerator ice Container Assembly is the removable storage and dispensing interface that captures ice from the icemaker and routes it to the dispenser or door bin. Functionally it provides a guided chute or auger housing, a mechanical coupling for the auger or dispenser armand surfaces that actuate bin-full or position sensors; any mismatch in rail geometry, latch location or sensor actuator position will prevent proper fitment even if the external dimensions appear similar. For technicians, confirm compatibility by comparing the container’s mounting tabs, bayonet-style latchand dispenser interface to the refrigerator’s mating features rather than relying solely on model family names – for example, a container from a top-freezer Frigidaire may share overall shape with a side-by-side unit but differ in the location of the auger coupler and sensor boss.
Replacement is a straightforward mechanical procedure when the components are accessible: drain or remove loose ice, release the retaining clips or bayonet lock, disengage the container from the icemaker discharge chute, inspect seals and the auger coupler for wear or damage, then seat the replacement so rails and sensor actuators align and the latch engages. Common troubleshooting steps include checking for physical obstructions (ice bridges,broken fins,or foreign debris),manually rotating the auger to verify free movement,and confirming that the bin-full switch or door sensor is contacting its actuator; if ice dispenses intermittently,inspect the auger coupler for stripped spline teeth or the container for warped mounting surfaces. Rapid diagnostics and typical checks are listed below to assist repair decisions.
- Symptom: No dispense – Check auger rotation and electrical connection to the dispenser motor.
- Symptom: Jammed or crushed ice – Inspect for ice bridging and manually clear before testing auger engagement.
- Symptom: Leaking or frost buildup – Examine container shell for cracks and check door seal and defrost function.
- Fitment check: Compare mounting tab spacing, bayonet latch positionand sensor actuator location before installation.
| Item | Description |
|---|---|
| Function | Stores dispensed ice, guides ice to auger/dispenserand actuates bin/full or position sensors |
| Common failure modes | Cracked shell, stripped auger coupler, warped rails, obstructive ice bridging |
| Fitment checks | verify mounting tab spacing, latch typeand sensor actuator alignment with the refrigerator unit |
Q&A
What refrigerators is the 241860810 Frigidaire ice Container Assembly compatible with?
The 241860810 is an OEM Frigidaire ice container assembly intended for specific Frigidaire/Electrolux/White-Westinghouse models that use that part number. Compatibility varies by refrigerator model and serial number. To confirm fit, compare the part number on yoru old ice bin, check the refrigerator model number (usually on a plate inside the fresh food compartment)and verify with Frigidaire parts diagrams or a parts reseller listing. Do not rely on appliance age alone-always confirm with the model number.
Does this part include the auger/motor or is it just the plastic ice bucket?
Descriptions vary by seller, but the OEM designation “ice container assembly” commonly means the assembly may include the bucket and internal components such as the auger and drive motor. Some listings are just the plastic bin. Always check the product description and parts diagram for the exact listing you are buying. If the motor/auger is required for your dispenser and not included, you will need to order that component separately.
How do I remove and replace the 241860810 ice container assembly?
General replacement steps: 1) unplug the refrigerator or switch off its breaker. 2) Empty the ice from the container and remove any nearby shelves or door bins that obstruct access. 3) If the container is held by a latch or screws, release the latch or remove fasteners. 4) If the assembly has an electrical connector for the auger motor or heater, unplug it (note the connector orientation). 5) Slide or lift the old container out carefully. 6) Position the new container, connect any electrical plugs, seat it into the guides/latchesand reinstall screws or clips. 7) Restore power and run a test or force an ice harvest cycle to ensure proper operation. Consult the refrigerator service manual for model-specific steps and torque/fastener locations.
My ice dispenser is jamming. How can I tell if the ice container assembly is the problem?
Common container-related causes: cracked or warped bin allowing ice to bridge, damaged or seized auger, worn auger motor couplingor excessive ice clumping from frost buildup. diagnose by: removing the bin and inspecting for cracks or warped surfaces, manually turning the auger (with power off) to see if it rotates freely, and checking for large fused ice chunks. If the bin is damaged or the auger/motor does not turn, the container assembly or its drive components are likely at fault. Also check the ice maker’s harvest/heater function and freezer temperature-overly cold/freezing cycles can cause clumping that mimics container failure.
what is the safest way to clear a frozen/blocked ice container without damaging it?
Turn off the ice maker or unplug the refrigerator, then remove the ice container.Allow the ice to thaw naturally at room temperature or speed thawing with a bowl of warm (not boiling) water poured over the stuck ice. Avoid using metal tools to chip ice-sharp objects can crack the plastic container or damage the auger. A hair dryer on low heat can be used cautiously to melt ice, keeping it moving and avoiding prolonged heat on any single spot. After clearing, dry the container completely before reinstalling to prevent immediate refreezing.
How should I clean and sanitize the 241860810 ice container assembly?
Use warm water and mild dish soap to wash the container and auger (if removable). Rinse thoroughly to remove all soap residues. For sanitizing, use a solution of 1 tablespoon of household bleach per gallon of water or a commercial food-safe sanitizer, rinse with clean waterand air dry. Do not use abrasive pads,strong solvents,or scouring powders that can scratch plastic. Avoid dishwashers unless the manufacturer explicitly states the part is dishwasher-safe.
After installing a new ice container, do I need to reset the ice maker or run a special cycle?
Often you should run a diagnostic or harvest cycle to confirm the auger and dispenser operate and to clear any old ice. Many Frigidaire units will resume normal operation once power is restored; others require a manual reset by pressing a specific control combination or toggling the ice maker’s power switch. If uncertain, unplug the fridge for 30-60 seconds to reset electronics, then consult your refrigerator’s user/service manual for the proper diagnostic or test cycle for your model.
Is it better to buy the OEM 241860810 or an aftermarket replacement?
OEM parts guarantee fit and match the original specifications (dimensions, mounting pointsand any integrated components). Aftermarket parts can be less expensive but may require modifications or may not include components like the motor/auger. For reliability-especially for a part that must align precisely with dispenser and motor coupling-OEM is generally recommended. If you choose aftermarket, verify return policy, warrantyand that the part is explicitly listed as compatible with your refrigerator model number.
The Conclusion
The 241860810 Frigidaire refrigerator ice container assembly serves a central role in ice production and storage, providing a secure, hygienic receptacle for ice and interfacing with the ice maker and dispenser systems. Proper fit and condition of the assembly help maintain consistent ice quality, prevent spills and jamsand contribute to the overall reliability and user convenience of the refrigerator.
Because signs such as inefficient dispensing, ice buildup, leaksor unusual noises can indicate container wear or misalignment, accurate diagnosis is important to determine whether cleaning, adjustment, or replacement is required. Timely replacement with a compatible or manufacturer-recommended assembly restores function, supports safety and sanitationand helps avoid secondary damage to the ice maker or dispenser. When uncertainty exists, following the manufacturer’s guidance or consulting a qualified technician ensures correct part selection and installation, protecting performance and longevity.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
