1129313 Whirlpool Refrigerator Ice Makerā Kit Round Plug is a round electrical/mechanical āinterface component supplied with certain Whirlpool iceā¤ maker retrofit adn replacement kits; it is used to connect or terminateā¤ the ice maker assembly at the refrigerator wiring harness ā¢and āto provide a sealed, strainārelievedā¤ junction ā¤at the ice maker āmounting location. As a component type, it ācombines connector features-such as pin alignment and insulation-with a form factor intended to fitā a circular access or mountingā£ opening onā¤ the iceā maker housing or cabinet.
Inside the appliance, āthe round plug functions as the physical and electrical bridge between theā iceā maker module and the refrigerator’s control ā£and supply systems. It carries lowāvoltage power ā¤and signalā¤ conductors that control the ice ā¢maker motor, harvest heater (if present), āfill ā¢valve actuation and diagnostic feedback to the āmain control ā¢board, while also providingā£ environmental protection against moistureā¤ and mechanical strain at the wiring ātermination point. Because it sits at ā¢the interface of the ice maker, wiring harnessand cabinet, it affects electrical continuity, groundingand sealing between the freezer compartment and the chassis wiring that routes to theā primary controlā and water valve assemblies.ā
In this articleā readers willā¤ findā£ a technical overview āof the part’s intended ā£function and where āitā isā¤ typically installed, guidance onā compatibility considerations (mechanical fit, āpinā¢ count ā¤andā terminal ā£type), common failure symptoms to watch for (intermittent ice maker cycles, ā¢no powerā toā the ice maker, corroded or looseā¤ terminals, ā£water ā¢intrusion), basic troubleshooting stepsā (visual inspection, continuity checks, harness āisolation) and practical replacement considerationsā¢ (matching OEM ā¤form factor, ensuring proper sealing and strain reliefand safe deāenergizedā installation procedures). The ā¢focus is on providingā£ technicians, engineers and appliance owners with the context needed to diagnoseā connectorārelated issues and select an appropriate replacement orā repair approach.
Table of Contents
- Function āandā£ Role of the Ice Maker Roundā plug inā Whirlpoolā£ Refrigeration Systems
- How the 1129313 Whirlpool āRefrigerator Ice Maker Kitā Round ā¤Plug Operates Within the Ice-Making Assembly
- common Failure Symptoms and Diagnostic Indicators ofā¤ Roundā Plug and Ice Maker Faults
- Compatibility Across Whirlpool Appliance Models, Replacement Considerationsand installation Procedures
- Q&A
- In āSummary
Functionā£ and Role āof theā£ Ice Maker Round āPlugā¤ in ā¤Whirlpool Refrigeration ā¤Systems
the 1129313 Whirlpool ā¢Refrigerator Ice Maker Kit Round Plug functions as the primary electrical interconnect between theā ice maker module āand the refrigeratorā wiringā harness.Its multiāpin round designā¢ routesā¢ the ā£power feed and control circuits that operate the water inlet valve, the heater/harvest cycleand theā¢ iceā¤ maker’s ā¢internal thermostat or switch. Mechanically itā provides a keyed mating and a retention feature to resistā£ vibration and accidental disconnection; electrically it concentrates the contact points that techniciansā¤ check when diagnosing ā¤ice production āor fill failures.ā In retrofit or repair situations the ā1129313ā¤ plug is used to replace damaged OEMā connectors or to adapt an ice maker kit toā an existing harness, ā¢restoring the intended signal and power paths without altering the appliance wiring layout.
Compatibility requires that the plug’s pinout match āthe refrigerator harness and ā£that the connector mates fullyā£ with no bent pins or corrosion; mismatchedā pin assignments or aā¤ partially seated plug willā¢ produce symptoms such as no fill, no harvestorā intermittent operation. field diagnostics typically include a visual inspection of contact condition, a continuity check on harness conductorsand a voltage check during an active cycle (e.g., āverifying the supply voltage at the connector when the iceā£ makerā calls for water). During installation confirm the plug isā£ fully engaged, theā retaining mechanism is lockedand any strain ārelief is restored so that vibration ā£or door movement does not stress the terminals.
- Keyā features: keyed round housing, retention latch, corrosionāresistant contacts.
- Common symptoms of connector failure:ā¢ intermittentā¤ iceā production, no water fill, erratic harvest cycles.
- Basic checks: visual contactā inspection, continuity of individual pinsand voltage verification duringā£ a callāforāwater or āharvest event.
| Item | Description |
|---|---|
| Connector type | Multiāpin round āplug designed āto ā¤mate with Whirlpool OEM harnesses |
| Signals carried | Power for water valve/heater and lowāvoltage control/thermostat ā¤signalsā to the ice maker |
| Typicalā¢ failure modes | Corroded orā bent contacts, brokenā wires at the crimp, poor retention leading toā intermittent connection |
How the 1129313 Whirlpool Refrigerator Ice Makerā Kit ā¤Round Plug Operates Within the Ice-Making Assembly
The 1129313ā Whirlpool Refrigerator Ice Maker Kit round Plug servesā asā¤ the electrical and mechanical interface between the ā¤refrigerator wiringā harness andā£ the ice-making module. This molded round connector routes power and discrete control signals for the ā£harvest heater, water-fill valveand temperature āsensingā circuit while providing strain relief and environmental sealing to reduce corrosion and intermittent contact. The plugā£ is keyed to āmate with a matching āOEM receptacle ā¢so mating alignment and pin retention restore the original wiring geometryā when repairing āor replacing a damagedā harness.
In normal operation the plug must ā£present low-resistance connections under load; elevated contact resistance or an open terminal will change ā¢theā ice-maker’s behavior (no fill, incomplete harvestor intermittentā cycles). Technicians ā£should inspect ā¤the plug for bent pins, plasticā fatigueor ā¤moisture intrusion and use a multimeter to verify continuity and voltagesā at the connector during commanded cycles. When selecting a replacement,ā¢ matchā¢ the pin ācount ā¤and pin-out toā¢ the refrigerator ā£harness-incorrectā pin āmapping can ā£prevent valve āactuationā¤ or damage controlā circuits. For practical troubleshooting,compare ā£measuredā¢ voltages at the harness and at āthe mating ā¤face ā£of āthe plug during a fill or harvest sequence to āisolateā whether the fault lies in the plug,the wiring,or the ice-maker module.
- Common checks: visual inspection, continuity test, loadā£ voltage during operationand ā£secureā mechanical latching.
- Symptoms of connectorā failure: āintermittent fill, no harvest,ā£ or erratic ice-makerā¢ cycling.
- Replacement guidance:ā£ ensure mating plug has identical pin-out and reliable strain relief.
| Item | Description |
|---|---|
| Connector type | Molded round multi-pin plug with keyed retention forā¤ OEM harness mating |
| Primary signals | Power feed, fill-solenoid control, harvest/heater controland temperature/thermostat feedback |
| Common failure modes | Corroded or bent terminals, cracked housing, poor strain reliefand high-contact resistance |
| Compatibility notes | Use only plugs āwith matching pin count and pin-out to the refrigerator harness to ā£ensure functional interchangeability |
Common Failure Symptoms and Diagnostic Indicatorsā¤ of Round Plug and Iceā¤ Maker Faults
The round plug included in the 1129313 Whirlpool Refrigerator Ice Maker Kit āRound Plugā£ provides the electrical and mechanical interface betweenā¢ the ice maker module and the ārefrigerator wiring harness. Failures of ā¤this plug commonly manifest as loss of specificā control signals rather than aā¢ total power loss; degraded or corroded contacts can interrupt the heater/harvest āor fill circuits or create high-resistance connections that produce intermittent harvest cycles, partial fillsor no ice production. Mechanical āwear or a looseā fit can also produce erratic behavior when vibration or āthermal cycling changes ā£contact pressure, so a visual inspection of pin alignment and contact oxidation is an immediate diagnostic step.
Technically useful diagnostic indicators include contactā¤ continuityā checks with the harness disconnected,voltage verification atā¢ the connectorā¤ duringā¤ a known ice-maker cycle,and inspectionā£ for ā£signs of moisture intrusion orā heat ā¢damage at the plug body. A technician ā¢can ā£reproduce symptoms byā£ performing a controlled wiggle test while monitoring control signals with a multimeter āor oscilloscope; persistent open circuits, sudden resistance jumpsorā signal dropout during movement point to connector faults.ā For practical troubleshooting, compare readings toā a known-good harness or use the service manual’s connector pin map before replacing the āplug to confirm the issue is connector-related rather than an upstream control or thermostat āfailure.
- Noā ice production āwhile motor/controls appear powered
- Intermittent or partial fill cycles correlated to vibrationā or door opening
- Visible corrosion, pitting, āor discoloration ā¢on pinsā and receptacle
- High resistance or āopen circuit readings on continuity checks
- Localized melting orā burn marks ā¤indicating arcingā or shorting
| Item | Description |
|---|---|
| power/Control Pin | Supplies the ice maker control voltage; loss hear can stop all cycling functions. |
| Heater/Harvestā£ Pin | Delivers the ā£signal to release ice; interrupted circuits prevent harvest orā cause incomplete release. |
| Fill/Switch Pin | Interfaces with the water fill mechanism or ice-level ā£switch; faults āproduce overfill, no-fillor false full indications. |
Compatibility Across Whirlpool Appliance Models, Replacement Considerations, ā£and Installation Procedures
The 1129313 whirlpoolā¤ Refrigerator ā¢Ice Makerā£ Kit Round Plug provides āthe ā£electrical interface between the ice-making moduleā and the refrigerator harness; the round plug houses āthe power and control conductors thatā¢ operate the motor, solenoid (if present)andā sensingā¢ switches. Compatibility dependsā on the connector’s pin count,physical ā£keying,and the harness wiring colors and functions rather than the cosmetic appearance of the plug. Technicians confirm compatibility by matching pin count and spacing, measuring continuity between theā¤ harnessā and ice-maker terminals,ā£ and verifying that theā replacement ākit’s āmechanical mounting points line up with āthe refrigerator’s āexisting bracket locations.
Replacement and installation require both electrical and mechanical verification steps to avoidā¢ operational faults. Typical practical procedures include powering down the appliance, disconnecting the old unit, visually and electrically confirming the matingā£ connector and pin assignmentsand performing a controlled test after installation. Common āfield considerations: some refrigerators require an adapter harness ifā theā¤ socketā¤ shape differs, mounting tabs ā£can be slightly ā£offset requiringā¢ aā different screw or spacerand diagnostic modesā¢ should be ā£used to ārunā£ anā¢ initialā harvest cycle to confirm āactuator and heater operation.ā Follow these coreā steps during installation:
- Disconnect mains power ā¢andā shut āoff the water supply ā£(if theā£ ice maker uses a fill āvalve).
- Remove the old ice āmaker assembly, note harness color codes and pin positionsand compare directly to ā£theā replacement plug.
- Installā¤ the new kit, secure mechanicalā fasteners, connect the round plug, restore powerand run a manual harvest/test cycle to verify motor, heaterand ā¤fill operations.
| Item | Description |
|---|---|
| connector type | Round multi-pin ā£plug-match pin count and keying to harness |
| Electrical role | Supplies power and control signals for motor, switch detection,ā and fill solenoid |
| Mechanical fit | Mounting tabs and screw locations must align or use compatible bracket/adapters |
Q&A
How can I tell if the ā¤1129313 Whirlpool Ice āMaker Kit (round āplug) will āfit my refrigerator?
Checkā your refrigerator model ānumber ā(usually on a sticker inside the fresh food compartment āor onā£ the wall āof the freezer) andā compare it to Whirlpool’sā¢ parts crossāreference for partā 1129313. Physically verify the connector shape (the circular/āroundā plug), mounting holes, ā£and the ā¤ice maker’s footprint against āthe part you are ā¢replacing.If you are unsure, supply your refrigerator model and serial number to an authorized Whirlpoolā parts dealer āorā¢ Whirlpool customer ā¢service āto confirm compatibility.
Whatā typically comes in the 1129313 ice maker kit?
Contents can vary ā¢by seller, but anā OEM ice maker kit likeā 1129313 normally includes ā¢the ice maker assembly ā¢(ice mold and housing), theā£ electrical connector/harness as requiredand basic mounting ā£hardware. Some kits include a āfill tube or instruction ā¢sheet; some do not. Confirm the ā£exact contents with the seller or packaging beforeā beginingā the ārepair.
What are theā¤ safe, general steps to install theā 1129313 āice maker ā¢(round plug)?
General safe steps: 1) Unplug the refrigerator or switch off the breaker and shutā off the waterā£ supply. ā¢2) Removeā the ice bin and any trim to access the oldā ice maker.ā¤ 3) Take a ā¤photoā of the old iceā makerā and wiring for reference.ā¢ 4) Remove mounting screws and unplug the round connector andā any harness clips. 5) Install ā¢theā¢ new unit by mountingā£ it securely, reconnecting the round plug/harnessandā£ restoring any removed trim. 6) Turn ātheā water and ā¤power back on,ā then run a test/diagnostic cycle.Always follow the refrigerator’s service manual for modelāspecific instructions and wear safety gear as needed.
How do Iā test theā¢ new ice maker after installation to make sure it’s working?
Use the ā£refrigerator’s builtāin diagnostic/test mode if available (refer to the serviceā manual) ā¤or the āice maker’s testā¢ switch if present. A prosperous ātest ā£will runā£ the motor/harvest cycle and then command ā£a ā¢water fill. Listen for āmotor operation and the water valve activating during a fill.If you don’t haveā¤ a service mode,ā restore ā¢power,ā¤ wait for the freezer ā£to reach proper freezing temperature, ā¢and observe whether theā£ ice maker cyclesā and fills over theā next few hours.
My new ice maker is installedā but not making iceā – what should I checkā first?
Check these common items:ā£ 1)ā£ Power to ā¢the ice maker (connector fully seated and no blown āfuses/breaker). 2) Freezer temperature (should be ~0Ā°F ā/ -18Ā°C āfor āreliableā£ iceā production).3) Water supply (valve open and ā£supply pressure adequate).4)ā¢ Waterā inlet valveā operationā (listen for a fill or test ā¢for continuity/function). 5) āFill tube not blocked or āfrozen-defrost it if necessary. 6) Ice binā£ placed properly (some models ā£have a bin detect switch). 7) Water filterā conditionā (a clogged ā¤filter can reduce flow). Ifā¤ those are OK, run the ice maker test cycle and consult the serviceā¢ manual orā a technician for further diagnostics.
Whatā¢ doesā¢ āround plugā mean and how can I check the wiring/pinout for the ā¢connector?
āRound plugā refers to the shape of the electricalā connector on the ice maker harness (a circular plastic connector rather than a flat blade plug). Wiringā pinouts ā¢can vary ā£by refrigerator model, so do not assume pin functions. To verify pinout,ā consult the refrigerator’s wiringā£ diagram/serviceā£ manual. If needed, use a multimeter ā¤to check for signals āduring a test cycle or measure continuity to the control board. If you are notā comfortable with electrical ā£testing,ā have a qualified technician perform the checks.
Can I use the 1129313 kitā¢ to replace a ā¢different style ice āmaker,or are adapters available?
Typically you should ā£replace an ice maker withā the āsame part type (same connector/mounting) – ā£the 1129313 is intended for units that use the round plug configuration.Adapters āare uncommon andā¤ not ārecommended because pinouts and control signals may differ. If your refrigerator has ā£a ādifferent connector or differentā mounting, āobtain the correct OEMā¢ part for your model to avoid electricalā¤ or mechanical ā£incompatibility.
Are there maintenance tips or warranty considerations for the 1129313 iceā maker kit?
maintenance: keep the freezer at the recommended temperature, replace the water filter per the manufacturer’s schedule, periodically clean/sanitizeā¤ the ice bin and mold with a mild ā¤solutionā (followā Whirlpool’s instructions)and keep the fill tube clear. Warranty: āOEM parts usually carry a limited warranty from the manufacturer or the ā¤seller – keep your receiptā and part number. If you suspect a ā¤defective part, contactā¤ the parts vendor or Whirlpool support for warranty āserviceā£ and follow their return/installation instructions.
In Summary
The 1129313 Whirlpool Refrigerator Ice maker Kit āRound Plug āserves as ā£a dedicated āconnectionā point that āenables reliable electrical and functional integration of the ice maker within ā£compatible ārefrigerator models. Byā restoring the intendedā interfaceā£ and maintaining secure wiring connections,ā¤ the kitā¤ helps preserve āconsistent āice production, supports appliance performance, āand contributes to āsafe, uninterrupted operation whenā¢ installed correctly and matched to the appropriate āmodel.
Accurate diagnosis and timely replacement are vital to avoid unnecessary downtime or secondary damage. Confirming the underlying cause of anā ice-maker failure-through visualā¢ inspection, electrical testing and reference toā£ the āmanufacturer’s āguidance-ensures that replacement of the 1129313 kit isā the ā¤appropriate corrective step. Whenā replacement isā required,using the correct part and following recommended installationā¤ and safety procedures,or engaging qualified service ā£personnel,helps maintain appliance ā¤reliability ā¤and reduces the risk of repeatā£ issues.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
