240364501 Frigidaire Refrigerator Pan is a molded drain or drip pan designed to capture condensate âand defrostâ runoff beneath a refrigerator cabinet. It is âŁindeed a non-electrical service part-typically made from molded plastic â¤or similarâ corrosion-resistant material-that sits under the evaporator and â¤freezer compartment âŁtoâ collect water routed from the evaporator âŁdrain. as a passive containment component,its âprimary purpose âis to manage moisture and prevent water from reaching the appliance cabinet or floor.
Inside the appliance system the pan interfaces wiht the⤠evaporator drain, drain âŁtubeand the cabinet âmounting framework; itâ also functions in conjunction with the defrost system and the compressor/condenser assembly by âŁprovidingâ a receptacle â˘where defrost water â˘accumulates and later evaporates due to heat from⣠the compressor/condenser area.Common interaction pointsâ include the evaporator drain outlet, anyâ inline drain traps⢠or grommets, mounting clips⤠or âbracketsand inâ some designs, sensors or heating elements nearby that influence evaporation.⣠A compromised or misaligned â˘panâ can lead to leaks, microbial âgrowthor impaired drainage that â¤affect overall appliance reliability and serviceability.
In this article readers will findâ a technical overview âof â¤the pan’s function âŁand â¤typical locations in Frigidaire refrigerator models, âguidance on how to determine compatibility byâ part⣠number and⣠physical fit, common failure symptoms (such âas cracks, punctures, standing waterand overflow), diagnostic checks to isolate drain or pan-related issuesandâ practical replacementâ considerationsâ such as verification of â¤fitment,⣠correctâ routing âof drain â¤lines, securing methods, âand âpost-replacement leak⢠testing. The intent âis to provide â˘technicians, âengineersand appliance âowners with âŁthe contextual data needed âŁto âŁassess,⢠troubleshootand replace âthe pan without extraneous or promotional⢠content.
Table of Contents
- Function âand Role of the âcondensate Drain Pan in â¤Frigidaire Refrigeration Systems
- How theâ 240364501â Frigidaire⤠Refrigerator Pan⤠Controls Condensate Collection,⢠evaporationand Heat âŁtransfer
- Commonâ Failure Symptoms, Leak Patternsand Performance Indicators âŁof a Compromisedâ Condensate Pan
- Compatibility,â Replacement Considerations, StepâbyâStep Installationand diagnostic Troubleshooting for the Condensate âPan
- Q&A
- Concluding âRemarks
Function and Role of the condensate Drain âPanâ in⤠Frigidaire Refrigeration Systems
The condensate drain⢠pan collects meltwater âproduced during normal cooling andâ defrost cycles âŁand routes it away from the evaporator â¤assembly;â the 240364501 Frigidaire âŁRefrigerator âPan is a molded collection tray engineered to align with the evaporator drain boss and direct water âŁeither into a drain âtube â¤or to âan⢠evaporation zoneâ above the compressor. Its molded channels, raised flangesand drain boss control flow and minimizeâ splashing⢠while resisting thermal cycling; âmaterial choice⣠(typically polypropylene âŁor ABS)⤠providesâ chemical and â¤temperature resistance. Fit depends on theâ pan’s footprint, mounting-tab spacing, â¤and drain-boss⢠diameter, so compatibilityâ must be â¤confirmed against⣠the refrigerator modelâ and âŁmountingâ geometry rather â˘than assumed from appearance alone.
- Inspection checkpoints: visible cracks, warped edges, blocked drain⣠bossand whetherâ the pan⢠sits flush under the evaporator.
- Operational symptoms: water⢠under the cabinet, âsaturated â˘insulationor persistent odors indicate panâ failureâ or⢠a clogged drain âpath.
- Installation considerations:⤠ensure correct drain-tube alignment and slope,⤠secure⣠but non-deforming fastenersand verification of OEM mounting âdimensions.
| Item | Description |
|---|---|
| Location | Beneath the evaporator coil; positioned to âsend condensate â˘to a drain tubeâ or an evaporation area above compressor |
| Material | Molded â¤plastic â¤(polypropylene/ABS) selectedâ for âmoisture and thermal resistance |
| Failure modes | Cracks,⣠clogged drain boss, warped flanges or misaligned mounting â˘causingâ leaks |
Service procedures vary by fault: clear or thawâ the evaporator drain line and flushâ with⢠warm water when the drain is clogged, but replace âthe pan when there are fractures, missing or distorted mounting âtabsor⤠a damaged drain⤠boss thatâ prevents a sealed connection to the drain tube. For replacement,verify â˘pan dimensions,mounting-hole spacing,and âdrain-boss diameter against OEM specifications; an incorrect pan may allowâ condensate to bypass the âdrain path,causing repeated water intrusion,insulation damage,or â¤corrosion of âadjacent components.
How âthe 240364501⢠Frigidaireâ Refrigerator Pan⤠Controls Condensate Collection, Evaporationand Heat Transfer
The 240364501 âFrigidaire Refrigerator pan functions as the dedicated condensate â¤collection and evaporation tray positioned beneath the freezer evaporator and âabove the compressor compartment. It is⤠a molded thermoplastic â˘pan â˘shaped toâ intercept defrost âand drip water, âchanneling liquid âthrough â˘an internal trough into a shallow âreservoir where â˘surface â˘area â˘and proximity toâ heat sources promote evaporation.The pan’s geometry-integralâ drain channels, mounting tabs, âŁand an overflow⢠lip-controls liquidâ routing âduring normal operation and defrost cycles,⤠preventing unintended pooling within âŁthe cabinet and directing water toward the designed evaporation zone.
Evaporation and heat transfer â˘fromâ the pan occur through âŁa combination â¤of conduction, convectionand increased surface exposure: heat conducted from the compressor and adjacent chassis raises the âpan temperature slightly,â accelerating âŁevaporation;â convective airflowâ from the âcondenser area aids vapor removal; and a â¤smooth, thin-walled pan â¤maximizes thermal couplingâ while minimizing retained volume. Practical technician checksâ include verifying that âŁthe drain path into the pan is unobstructed, â˘that⤠the pan âis properly seated âunder its clipsand⣠that â˘there⢠are no cracks or warped sections that change flow behavior. â˘Symptoms âof â¤a failing or âimproperly âinstalled pan include persistent cabinet- âor floor-level moisture,excessive âice build-up⢠in the evaporator compartment,orâ unusual compressor â˘load â˘linked to trapped water.
- Primary features: molded reservoir,drain channel,mounting⤠tabs,overflow protection
- Thermal behavior: relies on nearby compressor heat and airflow âfor evaporation
- Common issues: cloggedâ drain,deformation,cracks thatâ lead to leaks
| item | Description |
|---|---|
| Material | Moldedâ thermoplastic designed for low thermal âmass and corrosion resistance |
| Location | Under âevaporator assembly / above compressor compartment |
| Function | Collects defrost â¤condensate and provides an evaporation surface using chassis heat |
| Maintenance | Clear drain lines,reseat âpan clips,inspect for cracks or warping |
Common âFailure Symptoms,leak Patterns,and Performance Indicators of a âCompromised Condensate Pan
The condensate pan collects defrost and evaporator âcondensate and routes it to a drain or evaporation area; a compromised pan changes the intended âdrainage path and creates external âleaks. Replacement parts such as the 240364501 Frigidaire âRefrigerator Pan ⢠are designed to match⤠the OEM drain boss⣠location, mountingâ pointsand overflow âgeometry for compatible Frigidaire âassemblies, so incorrect fitment can leave âgaps or restrict⣠flow. Typical pans are molded polymer or stamped metal with integrated â¤mounting features; failure often originates at stressed corners, thin sections,⣠or the drain â¤boss where fractures, deformationsor clogged â˘drain ports alter theâ pan’sâ capacity and sealing against the chassis.
- Visible â¤pooling: water accumulates under or beside the refrigerator rather than âin the pan.
- Intermittent drippingâ tied â˘to defrost⢠cycles, indicating overflow or âpartial blockage.
- Musty odors or biological⣠growth in âthe pan caused â˘by standing water⣠and organic⢠debris.
- Rust staining, corrosion (on metal pans)or hairline âcracks visible on inspection.
- Longer⤠compressor âor defrost cycles caused by evaporator icing downstream⣠from â˘poor drainage.
| Item | Description |
|---|---|
| Typical material | Molded polymer or âŁcoated metal with integrated drain boss âŁand mounting tabs |
| Common â˘failure mode | Cracks at the drain âboss, clogged drain outlet, deformation from impact âor â˘heat |
| Field observation | Water on floor after defrost, stainingor smell;⢠visible misalignment of pan⤠to chassis |
| Recommended âŁaction | Clear drain âtube and clean pan; if cracked or deformed, replace with correctly fitted part such asâ the 240364501 Frigidaire refrigerator Pan |
Diagnostic verification includes⣠a visual inspection, a functional â˘drain testand a controlled fill test: withâ the refrigerator âoff,â introduce a⤠smallâ volume of water intoâ the â˘drain inlet and observeâ whether it reaches the intended âevaporation area without bypassing the pan.Check âthe drain â¤line for obstruction â˘by running a narrow flexible tool or pressurized waterand confirm⣠the âpan sits flat and is not⤠sagging⣠or misaligned; â˘even small â˘tilts permit overflow during â¤heavy defrost â˘cycles.⤠For temporary containment, a technician can use a âdirected drip pan and âclear âthe drain, but⢠long-term âreliability requires restoring correct sealing âand geometry-replace â¤panels withâ an OEM-compatible unit whenâ cracks, permanent deformationor recurring biofouling persist.
Compatibility, Replacement Considerations, â˘StepâbyâStep Installationand Diagnostic Troubleshooting for the Condensate Pan
Theâ 240364501 Frigidaire Refrigerator âPan is the condensate collection â¤tray positioned beneath the âevaporator; its primary function is to collect defrosted water and direct it â˘to the âdrain tube or â˘evaporator heater/evaporation area. Compatibility depends on âfootprint, drainânipple location, â¤and whether the pan includes an integrated heater or sensor mounts. technicians replacing the pan must verify mounting tab â¤spacing, âpan depth, âand âconnector âtype-differences in any⢠of these⢠can prevent⢠proper seating, create siphon trapsor leave the drain misaligned.â For example, installing âa âŁnonâheated aftermarket⢠pan into a model that expects a heated pan may allow residual water⣠to freeze under⤠low ambient âŁconditions, producing recurring drain clogs even⣠though âthe pan itself âappears intact.
Follow a controlled âremoval and install procedure andâ use simple⤠diagnostic tests to confirm âcorrect operation: disconnect power, clear theâ drain pathand confirm that water poured âinto the evaporator drain reaches and exitsâ the replacement pan âwithout pooling. Common failure âmodes are⤠blocked drain â¤tubes, hairline cracks in the pan, displaced drain grommetsor âfailed heater elements⤠on heated pans; âŁmeasure â˘heater continuity âŁwith a multimeter and inspect âseals visually. The checklist⣠belowâ condenses typical⢠installation and troubleshooting actions⢠into discreteâ steps technicians can âfollow during service.
- Disconnect power and remove the toe kick or rear access âpanel to accessâ the âŁevaporator and pan.
- Empty standing water,remove evaporator cover if required,and inspect the drain tube âfor debris⣠or â˘ice blockage.
- Unfasten â˘mounting tabs and lift the old pan;⢠inspect the â˘drainâ nipple, grommetand â˘any heater connector.
- Install the replacement pan making sure the drain outlet aligns âand any â˘heater/sensor connector is â¤properly â˘seated.
- Reassemble covers, restore power, then pour 250-500 ml ofâ water⣠into the evaporator⢠drain to verify unobstructed flow and⣠no leaks.
- If water fails to drain, check for misalignment, crushed tubingor frozen â˘blockages;⣠test heater resistance where applicable.
| Item | Description |
|---|---|
| Material | Typically molded ABS or⤠polypropylene for chemical and thermal resistance; verify OEMâ specification for heated variants. |
| Key compatibility checks | Mounting tab spacing, drainânipple position, pan depth, â˘and⣠presence/connector type⣠of any heater or sensor. |
| Diagnostic indicators | Floor puddling, âfrost âon evaporator, intermittent drippingâ at baseor high âresistance/no continuity on heater circuit. |
Q&A
Is part 240364501 the⤠correct replacement pan for my Frigidaire â˘refrigerator?
Possibly – 240364501 is a Frigidaire⤠replacement pan intended for specific models. The âonly reliable way to confirm fit is to check âŁyoru refrigerator model number (usually on a tag inside the fresh food compartment or â˘on the back) and search that model against Frigidaire’s⣠parts lookup or an authorized âparts dealer. Do not ârely solely on âŁphysical âappearance; âdimensions and mounting points vary between â˘models.
How canâ I identify the existing âpan⢠to know whether it’s 240364501?
Turn off and unplug the â¤refrigerator,remove the toe â¤grille or access panel at the base,and visually inspect theâ pan.Some pans are â¤stamped with a part number on the underside or edge.if no number is visible,⢠note â¤the fridge model number and compareâ with âthe manufacturer’s parts diagram or contact Frigidaire/authorized parts sellers for confirmation.
What are âŁthe common â˘signs thatâ the⤠drain/evaporator pan needs replacing?
signs include visible cracks or splitâ seams, persistent â¤water pooling under or around the fridge, a sour or musty odor âthatâ doesn’t clear after cleaningor a pan that â¤is warped/sagging so âit no longer⣠collects defrost⣠water properly. If the pan is damaged,it should be replaced to prevent floor âdamage and âŁmold growth.
can I install part â240364501 myselfand âŁwhat tools are required?
Many owners⢠with basic mechanical skills can â¤replaceâ a drip/evaporator pan themselves. Typical tools: âscrewdrivers or nut drivers toâ remove the toe grille and any âbrackets, a flashlightand a towel âor small âcontainer â¤to catch residual water. âAlways âunplug the⣠refrigerator â˘before starting. If the panâ is tough to âŁaccess â(built-in cabinets, sealed base)or if you’re not âpleasant âŁmovingâ the appliance, contact a qualified technician.
What⣠are the steps to remove and install âŁthe⣠pan safely?
General steps: unplug the â¤fridge, â˘remove the toe⤠kick âor lower access panel, slide the panâ out from under the evaporator âarea (watch for water),⢠remove mounting clips or screws if present,â replace⢠with the â¤new pan ensuring proper⤠orientation âŁand alignmentâ of⢠drain outlets, reinstall fasteners and access⤠panel, âplug theâ fridge back in. Exact steps can⢠vary by model, so⢠consult your model’s service âmanual or installation instructions for⤠specifics.
What material is⤠the⢠pan made âof and is it âdishwasher-safe?
drain/evaporator pans are⣠typically molded plastic (polypropylene or similar) designed to resist corrosion and collect defrost water.They⢠are⢠usually not dishwasher-safe because the âpan may â˘be large, warped by high dishwasher temperaturesor âhave attached components. Clean by hand with warm â¤water, âmild detergentand a soft brush; disinfect with a diluted vinegar solution if âneeded.
Should⢠I â˘buy â¤the⢠OEM 240364501 part or isâ an aftermarketâ pan acceptable?
OEM parts ensure correct âŁfit, âdrainage alignment, âand material quality for â¤the specified models. Aftermarket â˘pans can be less expensive but may â¤require modification to fit or drain⣠correctly. â˘If exact fit and worry-free installation are crucial, choose the â¤OEM Frigidaire part. If âŁcost isâ a primary concern â¤and youâ can verify fit/modify â˘safely, a reputable aftermarket partâ may be acceptable.
Where can I purchase part 240364501 and what about warranty⢠or returns?
You can buy the part from Frigidaire-authorized dealers, major appliance⤠parts⤠retailersor reputable online marketplaces.⢠Prices and availabilityâ vary.â OEM âparts bought from authorized sellers frequently âenough carry âŁaâ limited parts warranty; third-party sellers and aftermarket parts have thier own return âŁand âŁwarranty policies.Keep your âproof of purchase â¤and confirm the âseller’s return policy before buying in case the part â˘is not âcompatible or defective.
Concluding Remarks
The 240364501 Frigidaire refrigerator pan plays aâ small but essential⣠role in appliance performance by âcollecting and directing condensate and⤠defrost runoff away from internal components. Properly fitted and intact, the⣠pan helpsâ prevent water accumulation and leaks, supports âefficient drainage to the evaporator âŁor condenser area, âŁand contributes to⤠overall hygiene â¤by minimizing standing water and related odors or microbial growth.
Timelyâ and accurate diagnosis is⤠important when symptoms such as persistent pooling,â unusual⢠odors, visible cracks,⢠or âŁrecurring leaks appear. â¤Determining whether an âissue stemsâ from a âŁclogged drain,⤠a misaligned or damaged⢠panor anotherâ component ensures that repairs address the⢠rootâ cause rather than just the symptoms.â When replacement is needed, using⢠the â˘correct 240364501 â¤pan-or an approved equivalent-and following proper installation procedures restores designed drainage performance and reduces the ârisk of further damage to the refrigerator.
Routine inspection and cleaning of the drain âchannel and pan can â˘extend service life â˘and reduce âthe âlikelihood⢠of unplanned repairs, while⢠professional evaluation is advisable âfor complex âor recurrent problems. âBy combining accurate diagnosis, appropriateâ replacementand basic preventive maintenance, owners can âŁmaintain appliance â¤reliability â¤and limitâ water-related damageâ over the long term.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
