297216600 Frigidaire Refrigerator Defrost Thermostat is a temperature‑activated switch used in automatic defrost refrigeration systems. It is a small, typically bimetal or temperature‑sensing device that monitors the evaporator coil temperature and closes or opens an electrical circuit to control the defrost heater based on a predetermined cutoff temperature.
Installed against the evaporator coil or its mounting bracket, the defrost thermostat completes the heater circuit during a defrost cycle and opens the circuit once the coil has warmed to the safe cutoff temperature. It thus operates in series with the defrost heater and in coordination with the unit’s defrost control (mechanical timer or electronic control board). Proper function of this thermostat prevents heater overrun, limits unnecessary energy drawand ensures ice accumulation on the evaporator is periodically removed so evaporator airflow and refrigeration performance remain within design parameters.
In this article you will find a technical overview of the 297216600 defrost thermostat’s function and typical installation locations, guidance on compatibility and how to verify the correct replacement part, common failure symptoms to recognize (for example, persistent frost buildup or continuous heater operation), practical troubleshooting checks a technician can performand replacement considerations such as electrical ratings, mounting method and connector type. The data is presented for technicians, engineersand informed appliance owners seeking a clear, service‑oriented understanding of the component.
Table of Contents
- Function and Role of the Defrost Thermostat in Refrigerator Frost Control and cycle Management
- How the 297216600 Frigidaire Refrigerator Defrost Thermostat Works inside the Appliance: Sensing, Contactsand Control integration
- Common Failure symptoms and Electrical/Mechanical Indicators of a Defective Defrost Thermostat
- Replacement Considerations and Installation Procedure for defrost Thermostat Units, Wiring, and Calibration
- Q&A
- The Conclusion
Function and Role of the Defrost thermostat in Refrigerator Frost Control and Cycle Management
The 297216600 frigidaire Refrigerator Defrost Thermostat is a temperature-activated switch mounted to the evaporator coil that permits the defrost heater to energize only when the coil temperature is below a specified threshold. In operation the device is typically a normally closed sensor at low temperatures: it closes the heater circuit during a timed defrost initiated by the control board or mechanical timer and then opens once the coil warms to the thermostat’s cut-out temperature, terminating the heater. Proper function depends on correct placement (clipped directly to the evaporator tubing), secure electrical connectionsand a thermostat temperature rating that matches the refrigerator’s defrost design; mismatches in mounting style or rating can cause incomplete defrost or unnecessary heater run time in service replacements.
in the refrigerator’s cycle management the defrost thermostat works as a safety and control point that prevents overheating of the evaporator and limits defrost duration to the temperature needed to remove frost. If the thermostat fails open,the defrost heater will not be allowed to run and frost will build on the evaporator,reducing cooling efficiency; if it fails closed or is improperly positioned,the heater may remain enabled longer than intended during defrost intervals,stressing components and potentially warming the compartment. Technicians commonly verify the part by checking continuity with a multimeter at cold temperatures (placing the sensor in an ice water bath) and by confirming the clip location and terminal type match the replacement; swapping or bridging the thermostat temporarily can also isolate whether the control board or heater circuit is at fault.
- Common symptoms: excessive frost accumulation, decreased cooling capacityor irregular defrost cycles.
- Compatibility checks: terminal style, mounting clipand temperature cut-in/cut-out specifications.
- Diagnostic tip: continuity present at low temperature and open at warm temperature indicates correct basic operation.
| Item | Description |
|---|---|
| Type | Normally closed temperature-activated switch mounted to evaporator |
| Function | Enables defrost heater during timed defrost; opens to terminate defrost at set temperature |
| Diagnostic test | Multimeter continuity in ice bath; open when warmed above cut-out |
| Replacement note | Match mounting clip, terminal styleand temperature rating to OEM 297216600 request |
How the 297216600 Frigidaire Refrigerator Defrost Thermostat Works Inside the Appliance: Sensing, Contactsand Control Integration
The 297216600 Frigidaire Refrigerator Defrost Thermostat is a temperature-actuated, two-state switch used in the defrost circuit to protect the evaporator and defrost heater from excessive temperature. Mechanically it is a bimetal thermostat mounted in thermal contact with the evaporator coil or a sensor well; when the coil is at refrigeration temperatures the thermostat remains closed so the control can complete the defrost heater circuit, and as the heater raises the evaporator assembly the bimetal opens at its preset trip point to interrupt power. In practical installations this thermostat is wired in series with the defrost heater and controlled by either a mechanical timer or an electronic control board,so its open/closed state directly enables or disables heater operation during a defrost cycle.
From a service standpoint the device’s compatibility is straightforward: it replaces defective thermostats in Frigidaire systems that use the same mounting and connector style, but always verify the OEM number before ordering. Common failure modes include a thermostat stuck closed (defrost heater runs until excessive warming or component damage) or stuck open (defrost never completes and the evaporator accumulates frost). Technicians commonly verify operation with an ohmmeter-continuity at low coil temperatures and an open circuit after warming the thermostat-or by confirming connector fit and the thermostat’s position at the evaporator. Below are typical signs and a quick test checklistand a compact reference table summarizes the thermostat’s role and test method.
- No continuity when evaporator is cold: thermostat likely open/faulty – results in persistent frost.
- Continuity at warm temperatures: thermostat likely stuck closed – defrost heater may overheat parts.
- Test method: measure continuity cold, then apply gentle heat (hair dryer) to confirm it opens as temperature rises.
| Item | Description |
|---|---|
| function | Series temperature switch that interrupts the defrost heater circuit when the evaporator reaches its trip temperature. |
| Type | Bimetal temperature thermostat (normally closed at low temperatures, opens when warmed). |
| Location | Mounted in contact with evaporator coil or sensor well, frequently enough on the evaporator bracket. |
| Test method | Continuity check cold (closed), warm to verify it opens; inspect connector fit and physical mounting. |
Common Failure Symptoms and Electrical/Mechanical Indicators of a Defective Defrost Thermostat
The 297216600 Frigidaire Refrigerator Defrost Thermostat is a temperature-actuated switch that allows the defrost heater to energize only when the evaporator temperature is sufficiently low. Installed on or near the evaporator coil, the device is typically a bimetal or disc-style thermostat that is normally closed at low temperatures and opens as the evaporator warms during a defrost cycle to terminate heater current. Compatibility depends on trip temperature, terminal styleand mounting; technicians should verify these mechanical and electrical details against the appliance model before installing a replacement to ensure correct cycling and fitment.
Common failure modes produce observable electrical and mechanical indicators: persistent frost or ice buildup on the evaporator, a warm freezer compartment despite compressor operationor the defrost heater never receiving power. A practical diagnostic workflow includes a visual inspection for corroded or broken leads and a multimeter continuity test with the thermostat removed and the refrigerator unplugged. Expected behavior is continuity (near 0 ohms) when the sensing element is cold and an open circuit when the element has warmed above its trip point; if the device shows continuity regardless of temperature or remains open when cold, replacement is warranted.
- Excessive ice accumulation on evaporator or evaporator cover
- Freezer warm while compressor runs normally
- Defrost heater never energized during scheduled defrost
- Physical damage: cracked housing, melted terminals, or frayed leads
| Item | Description |
|---|---|
| Normal electrical behavior | Closed (continuity) at low evaporator temperatures; opens as temperature rises during defrost |
| Diagnostic test | Measure continuity with thermostat removed and power disconnected; simulate cold to confirm closure |
Replacement Considerations and Installation Procedure for Defrost Thermostat Units, Wiringand Calibration
The 297216600 Frigidaire Refrigerator Defrost Thermostat senses evaporator temperature and directly controls the defrost heater circuit by providing a closed contact while the evaporator is below its defrost termination threshold and opening as the evaporator warms. For replacement, select a unit with the same electrical rating, lead length, connector type, and mounting clip style; mismatched lead routing or a thermostat that sits away from the evaporator tube will either stop defrosts prematurely or allow the heater to run without proper termination. The thermostat is a temperature-actuated switch (typically a normally-closed element that opens at the designed termination temperature), so proper mechanical placement in the evaporator pocket and correct mating to the service harness are as critical as electrical compatibility when diagnosing intermittent defrost failures versus a failed thermostat element.
- Verify symptom and continuity first (cold = closed; warm = open) with a multimeter before ordering the replacement.
- Disconnect power and document wire locations, then remove the evaporator cover to access the sensor pocket.
- Fit the new thermostat in the same pocket or clip location, route and secure leads with heat-resistant sleevingand use the correct connector or spade terminal.
- Confirm operation by initiating a service-mode defrost or applying controlled heat to the thermostat to observe opening of the contact as the sensor warms; no user adjustment is typically available.
| item | Description |
|---|---|
| Part | 297216600 frigidaire Refrigerator defrost Thermostat - temperature-actuated switch for defrost termination |
| Mounting | clip or pocket on evaporator tubing; must mirror original position for accurate sensing |
| connector | Two-wire spade/harness connection; match polarity and terminal type to factory harness |
| Test method | Multimeter continuity: closed at low evaporator temps,opens as unit warms; verify during a controlled defrost |
Installation validation and calibration are functional rather than mechanical adjustments: because most defrost thermostats are fixed-set devices,calibration consists of verifying the thermostat transitions at the expected temperatures and that the defrost heater is de-energized when the thermostat opens. If the thermostat does not change state under the expected conditions,re-check thermal contact (ensure it contacts the tube,not ice or insulation),confirm the heater circuit and control board are supplying the correct voltage during a forced defrost,and re-test with a known-good thermostat or bench test. For long-term reliability, secure leads away from moving parts, avoid sharp bends at terminalsand use dielectric grease on spade connections in high-moisture environments to reduce corrosion-related failures.
Q&A
What is the 297216600 Frigidaire defrost thermostat and what does it do?
The 297216600 is an OEM defrost thermostat (a bimetal thermal switch) used on many Frigidaire refrigerators.It monitors the evaporator temperature and completes the circuit to the defrost heater only while the evaporator is cold during a scheduled defrost cycle. When the evaporator warms above the thermostat’s trip point the switch opens to shut off the heater and prevent overheating.
What symptoms indicate the defrost thermostat may be failing?
Common signs include excessive frost or ice buildup on the evaporator or in the freezer, a fridge that runs continuously and becomes too warm, or the refrigerator not cooling properly. If the thermostat is stuck closed, the defrost heater may run too long causing warm temperatures; if it’s stuck open, the defrost heater will never energize and the evaporator will frost over.
Where is the defrost thermostat located and how do I access it?
The thermostat is mounted on or clipped to the evaporator coil behind the freezer’s evaporator cover (back wall of the freezer). Access requires unplugging the refrigerator,removing shelving and drawers,and taking off the back evaporator cover panel. always disconnect power before working inside the freezer.
how do I test the 297216600 defrost thermostat?
With power disconnected, remove the thermostat and test it with a multimeter for continuity.At room temperature the switch may be open; to force it closed, place the thermostat in ice water (or a cold source) so it becomes cold and should show near-zero ohms/continuity. If it fails to close when cold or never opens when warmed, it’s defective and should be replaced.
Can I bypass the defrost thermostat to get the refrigerator working?
You can temporarily jumper the thermostat for diagnostic purposes, but bypassing it permanently is unsafe and not recommended. The thermostat protects the system from overheating during defrost; bypassing can damage components or create a fire hazard.Replace the part with the correct OEM replacement instead of running without it.
what are the electrical and temperature specifications for this thermostat?
The defrost thermostat is a simple bimetal switch rated for the refrigerator’s defrost circuit voltage and current (matching OEM heater circuit requirements). It is normally closed at low evaporator temperatures and opens above its designed trip temperature. Exact trip points and current ratings can vary by model; consult the refrigerator’s service literature or parts list for the precise spec for your model if you need exact numbers.
Is 297216600 compatible with my Frigidaire or other-brand refrigerator?
297216600 is an OEM Frigidaire part used on many Frigidaire/White-Westinghouse/Kenmore models,but compatibility varies by model and production date. Always verify fit by checking the refrigerator’s model number against the parts list or cross-reference lookup before purchasing. use OEM part sellers or the manufacturer parts database for confirmation.
How do I replace the defrost thermostat and any precautions I should take?
Turn off and unplug the refrigerator. Remove freezer shelves/drawers, take off the evaporator cover to access the thermostat, note or photograph wiring, disconnect the thermostat and remove any clips, and install the new thermostat in the same location and orientation (clip it to the evaporator coil). Reconnect wiring, reassemble panels, restore powerand verify normal defrost operation. Take care not to damage the evaporator fins, and always observe electrical safety-if unsure, hire a qualified technician.
The Conclusion
The 297216600 Frigidaire refrigerator defrost thermostat plays a central role in maintaining proper appliance operation by sensing evaporator temperature and controlling the defrost cycle.By initiating defrost when the evaporator reaches a predetermined temperature and allowing cooling cycles to resume once ice is removed, this component helps prevent excessive frost buildup, supports efficient heat transferand contributes to consistent temperature control and energy-efficient performance.
Because symptoms of a failing defrost thermostat can mimic other refrigeration faults, accurate diagnosis is important to avoid unnecessary repairs and to restore reliable operation. when testing confirms a defective unit, timely replacement with the correct part number ensures compatibility and preserves the intended functionality of the defrost system.For complex diagnoses or installation concerns, consulting a qualified service technician helps ensure safe, proper replacement and verification of the refrigerator’s overall performance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
