316272000 Frigidaire Igniter and Orifice Holder is a combined ignition and gas metering component used on Frigidaire gas ranges and ovens. The assembly typically consists of a machined orifice holder that secures the gas orifice and an igniter/spark electrode or hot-surface element positioned relative to the burner ports. Constructed from heat- and corrosion-resistant materials and fitted with electrical connectors and mounting points, this part locates the gas jet and ignition source to ensure consistent ignition at each burner.
Inside the appliance the igniter and orifice holder interfaces directly with the gas manifold and the burner assemblyand it is indeed functionally linked to the gas valve, control moduleand any flame-sensing devices. by holding the orifice in the correct position and maintaining the ignition element gap or proximity, the component helps establish the correct flow geometry and ignition energy needed for reliable combustion. Proper installation and condition of this assembly affect flame shape, combustion efficiencyand safety (preventing gas accumulation or delayed ignition), so it is a critical element for safe appliance operation.
This article will explain the component’s detailed function and how it integrates with the appliance’s gas and electrical systems, list typical model compatibility and identification tipsand describe common failure symptoms such as no ignition, delayed ignition, continuous sparking, gas odoror abnormal flame characteristics. It will also provide practical troubleshooting steps – visual inspection, electrical continuity checksorifice cleaning, gap measurement, and verification of gas valve operation – and outline replacement considerations including part matching, correct orientation and sealing, connector typesand post-replacement safety checks to restore reliable operation.
Table of Contents
- Function and Role of the Igniter and Orifice Holder in Burner Ignition and Gas Flow Control
- How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance and Interfaces with control Electronics
- Common Failure Symptoms and Diagnostic Indicators for Ignition and Fuel Delivery Issues
- Compatibility, Replacement Considerationsand Installation Best Practices for the Igniter and Orifice Holder
- Q&A
- In Summary
Function and Role of the igniter and Orifice Holder in Burner Ignition and Gas Flow Control
The 316272000 Frigidaire Igniter and Orifice holder combines the ignition element and the gas-jet mounting into a single service component that establishes the spatial relationship between spark/hot-surface ignition and the metered gas flow. The igniter provides the energy to initiate combustion while the orifice holder secures the jet and creates a sealed passage for downstream gas pressure; together they determine ignition timing, flame stabilityand repeatable burn characteristics. Mechanical damage to the ceramic insulator, electrode erosionor a displaced orifice directly alters flame shape, causes delayed ignition or intermittent sparkingand can change heat delivery to the cookware.
Technicians should treat the assembly as both an electrical and fluid-control component: confirm igniter continuity and correct operating waveform, verify the orifice size and seatingand inspect the holder mounting and sealing surfaces for distortion or carbon buildup.In practice this means checking resistance or spark timing with manufacturer procedures, clearing or replacing blocked jetsand using the exact orifice geometry or OEM 316272000 replacement to maintain correct gas flow. Common service checks include:
- Measure igniter continuity and look for cracked ceramic or corroded electrode tips.
- Verify orifice seating and cleanliness to prevent reduced flow or flashback.
- Confirm mechanical alignment so the ignition source is positioned correctly relative to the gas jet.
- Ensure mounting hardware and gaskets provide a gas-tight seal to avoid leaks and unstable combustion.
| Item | description |
|---|---|
| 316272000 | Igniter and orifice holder assembly for compatible Frigidaire burners; positions the gas orifice and supplies the ignition element to ensure consistent ignition and gas metering. |
How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance and Interfaces with Control Electronics
The 316272000 Frigidaire Igniter and Orifice holder is a combined mechanical and electrical assembly that positions the burner orifice, seals the manifold connection, and presents the igniter element to the combustion zone so the appliance can start a stable flame. In normal operation the control system energizes the igniter element so it either reaches a high temperature (hot-surface style) or provides an electrode for spark ignition; once the igniter demonstrates the expected electrical or thermal behavior the gas valve is permitted to open. The orifice holder portion maintains consistent spacing and alignment of the orifice to the burner ports, which directly affects flame geometry and combustion efficiencyand it can accept orifice inserts sized for natural gas or LP conversions.
The assembly interfaces to the appliance via the wiring harness and the appliance control or ignition module,which supplies power and monitors the igniter for the correct response before actuating the safety gas valve. The control electronics typically use either current-sensing of the igniter element or flame-detection circuitry to confirm ignition; a failing or weakened igniter will not meet the control board’s acceptance criteria and the valve will remain closed. For practical service work, verify harness voltages, continuity of the igniter, seating and orifice size, and the mechanical mounting; common field symptoms tied to the part include long ignition delays, absence of flame, yellow or lifting flames from misalignment, and gas smell from a leaking seat.
- Mounting and alignment: secures the orifice at the correct distance from burner ports.
- Fuel metering: accepts specific orifice sizes for natural gas or LP service.
- Electrical interface: connects to the control harness for power and monitoring.
- Safety interaction: control board only opens gas valve after expected igniter response.
- Diagnostics: symptoms include weak glow, no spark, ignition delay, or abnormal flame shape.
| Item | Description |
|---|---|
| Function | Position orifice, seal manifold, and provide ignition energy to the burner. |
| Electrical interface | Wiring harness to control/ignition module; monitored for current or flame signal. |
| Compatibility | Matches Frigidaire burner geometry and accepts specific orifice sizes for gas type. |
| Service check | Inspect connector, measure continuity/voltage, confirm orifice sizing and seating. |
Common failure Symptoms and diagnostic Indicators for Ignition and fuel Delivery Issues
The 316272000 Frigidaire Igniter and Orifice Holder combines the ignition electrode and the gas-orifice mounting in a single assembly that locates the metering orifice relative to the burner and provides the spark path required to ignite the gas. in normal operation the electrode must maintain a clean, correctly spaced spark gap and intact ceramic insulation while the orifice holder must seal and align the orifice so that the gas jet produces a stable flame. Mechanical wear, ceramic cracking, carbon tracking, corroded contacts, or a misaligned orifice will change the ignition characteristics or gas flow; matching replacement parts must replicate the original orientation, mounting threads, and electrode position to restore reliable function on the affected Frigidaire range model.
- No ignition: clicking without a visible spark or flame, frequently enough caused by open electrode wiring, ceramic insulation failure, or a faulty ignition transformer.
- Slow or delayed ignition: persistent sparking before flame establishment, commonly due to a partially clogged orifice or weak spark energy.
- Weak or yellow flame: reduced gas flow from a partially blocked orifice or incorrect orifice seating causing incomplete combustion.
- Intermittent operation: ignition works sometimes but fails at other times, indicating loose connectors, moisture/contamination on the electrodeor thermal cycling damage.
- Gas odor without ignition: gas flow without lighting points to valve or orifice issues and demands immediate gas shut-off and leak testing.
| Item | Description |
|---|---|
| Primary function | provide ignition spark and accurately position/seal the gas metering orifice for stable burner combustion |
| Speedy diagnostic checks | Visual electrode inspection, continuity check on wiring, observe spark pattern, blow out orifice and inspect for debris |
| Compatibility note | Intended for select Frigidaire gas ranges; confirm appliance model and part number before replacement |
Diagnosing problems combines visual inspection and simple electrical checks: verify continuity through the igniter circuit, inspect the electrode ceramic for hairline cracks or carbon trackingand confirm that the orifice sits squarely in the holder and is free of deposits. Observe the spark: a small, consistent blue-white spark at the intended gap suggests the electrode and transformer are functioning; a weak, intermittentor off-center spark suggests grounding or alignment faults. Practical repair workflow for a technician includes isolating the appliance power and gas, performing a continuity test with a multimeter, cleaning or replacing a clogged orificeand performing a controlled functional test after reassembly to confirm proper ignition timing and flame shape.
Compatibility, Replacement Considerationsand Installation Best Practices for the Igniter and Orifice Holder
The 316272000 frigidaire Igniter and Orifice Holder is a combined mechanical and electrical component that secures the gas orifice and positions the ignition element relative to the burner port. In operation the orifice holder aligns the metering orifice with the burner throat while the igniter provides the required energy-either a hot surface or spark-to initiate combustion. Compatibility depends on manifold thread sizeorifice diameter (natural vs LP), and mounting flange dimensions; technicians should cross-reference appliance model numbers and manifold specifications rather than assuming interchangeability across different Frigidaire ranges or ovens.
Replacement decisions are driven by observable symptoms (failure to ignite, delayed ignition, visible cracks in the igniteror gas leakage at the orifice joint) and by simple bench tests such as continuity and secure electrical grounding checks. Proper installation practices include isolating gas and electrical supplies, verifying the correct orifice for the fuel type, aligning the igniter tip at the OEM-specified location relative to the burnerand performing a pressure- or soap-bubble leak test after reassembly. Service technicians should follow manufacturer torque and clearance specifications, replace any degraded gaskets or sealing washersand document the orifice size used so the appliance maintains designed combustion characteristics and safety margins.
- Confirm fuel type and orifice sizing before installation.
- Check igniter continuity and inspect for heat or mechanical damage.
- Secure mounting without over-tightening; use OEM torque where available.
- Perform a gas leak test after connecting the orifice holder to the manifold.
- Record orifice identifier and installation orientation for future service.
| Item | Description |
|---|---|
| Orifice size / fuel type | Must match appliance specification (natural gas vs LP); affects flame characteristics and safety. |
| Igniter alignment | tip position relative to burner port determines reliable ignition and prevents impingement on flame. |
| Mounting seal | Use new gasket or washer to prevent manifold leaks; check thread engagement and seal integrity. |
| Common failure modes | igniter cracking, wire/connector corrosion, loose orifice threads, and clogged orifice passages. |
Q&A
What is Frigidaire part 316272000 (Igniter and Orifice Holder) and what does it do?
316272000 is an assembly used on Frigidaire gas cooktops/ranges that combines the spark igniter electrode and the orifice holder (the small fitting that positions the gas jet). The igniter generates the high-voltage spark that lights the gas, and the orifice holder locates and holds the orifice (jet) that meters gas to the burner.
What are the common symptoms that this part is failing?
Common signs include: no spark at the burner or intermittent sparking, continuous clicking with no ignition, weak or uneven flames, visible cracks or carbon tracking on the electrode, or a clogged orifice causing poor gas flow. If the electrode is broken or wiring is damaged you will usually see no spark at all.
How can I test the igniter and orifice holder to confirm it’s defective?
Visually inspect for cracked porcelain or carbon deposits and check for spark by operating the burner (carefully) - you should see a consistent spark at the electrode tip each time the spark module clicks. With power off, you can use a multimeter to check the igniter circuit for continuity; a wholly open circuit indicates a broken electrode/wire. Remove the orifice holder and inspect the jet for clogging. If there is no spark but the igniter wiring is intact and the spark module is known good, replace the assembly.
Can I replace 316272000 myselfand what safety precautions should I take?
Yes, a competent DIYer can replace it, but follow safety steps: turn off the appliance’s electrical power and the gas supply, and work in a well-ventilated area. Remove the burner cap/head to access the orifice holder, disconnect the igniter wire(s), unscrew the orifice holder from the burner tube, install the new assembly, reconnect wiring, restore gas and powerand perform a leak check (soap solution) at threaded connections. If you smell gas or are uncomfortable with any step, stop and call a qualified technician.
Why does the range click but the burner won’t light even though I see a spark?
If you see spark but no ignition, likely causes are a clogged orifice (no gas flow), the wrong orifice size for the fuel type, low gas pressureor a failing gas valve. Other causes include improper burner alignment preventing gas from reaching the spark area. Inspect and clean the orifice, verify correct orifice type for natural gas vs LPand confirm gas supply/pressure; if those checks pass, the valve or regulator may need service.
Does the orifice holder control whether the range uses LP or natural gas?
The orifice (jet) size determines fuel flow for LP versus natural gas; LP uses a smaller orifice than natural gas. The orifice holder holds that jet. When converting fuel types you must install the correct orifice and follow the manufacturer’s conversion kit instructions. Using the wrong orifice can cause poor combustion and safety hazards.
How should I clean or maintain the orifice holder and igniter?
Turn off gas and power first. Remove the orifice holder and blow out the orifice with compressed air or gently clear debris with a fine soft wire or needle – do not enlarge the hole or use a drill. Wipe the electrode and porcelain with a soft cloth; remove carbon tracking with fine abrasive only if necessary. Reinstall carefully and perform a leak test on gas fittings. Regularly keep burner caps and ports clean to prevent debris buildup.
How do I confirm that 316272000 is compatible with my frigidaire model?
Check your appliance’s model and serial number (usually on a plate inside the oven door or storage drawer) and search the Frigidaire/owner’s part lookup or a verified parts supplier for compatibility with part 316272000.Many Frigidaire/Electrolux models use the same part, but always confirm with your specific model number before purchasing.
In Summary
The 316272000 Frigidaire igniter and orifice holder play a central role in gas appliance operation by initiating and directing the burner flame and maintaining consistent fuel delivery. Proper function of these components supports reliable ignition, efficient combustion, and overall appliance safety, contributing to optimal performance and longevity of the range or oven.
Accurate diagnosis and timely replacement when wear or damage is identified are essential to restore safe, efficient operation and to prevent secondary damage. Diagnosing symptoms correctly avoids unneeded part changes, while using the correct replacement part and following manufacturer guidance-or engaging a qualified service technician-ensures the repair addresses the root cause and preserves appliance performance and safety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
