241860801 frigidaire Refrigerator Ice Container Assembly is a dedicated replacement ice storage and interface component designed for compatible Frigidaire â¤freezer/ice dispenser models. As an ice container assembly, it â˘typically comprises the ice binâ that collects cubes from the ice maker, the mating surfaces that interface with the dispenser or auger mechanismand the mechanical features required for secure mounting and alignment âinside the freezer compartment.
Within âŁthe appliance, the ice container assembly serves as the intermediary between the ice-making module and the user-accessible dispenser or⣠manual access point. It interacts mechanically âŁwith the ice maker chute and augerâ or paddle driveand it âmay interface with electrical or optical level sensors, door interlocksand the dispenser motor coupling. Proper â¤fit and alignment⤠of the assembly affect ice feed, dispensing reliabilityand thermal isolation inside the freezer cavity; poor⢠sealing, âŁmisalignmentor⣠damage can lead too⢠ice bridging, motor âŁstallsor unintended sensor signals.
In this article readers will find a technical overview ofâ the⤠assembly’s functionâ and its common points of compatibility, a list of typical failure symptoms (for example, ice jamming, reduced dispensing, leaksor â˘sensor faults), â¤step-by-stepâ troubleshooting⣠checks âto isolate mechanical versus control issuesand âpractical â˘considerations for replacement (including âŁfitment âverification, inspection ofâ mounting features and seals, electrical connector checksand basic safetyâ precautions such as disconnecting power and water). The intent is to âprovide â¤technicians, engineersand experienced appliance owners with the diagnostic context needed to assess, repairor replace â¤the ice container assembly⤠correctly and safely.
Table of Contents
- Function and Role ofâ the Ice Container Assembly âŁin the âŁRefrigeration and Ice-Delivery System
- How⢠the â˘241860801 Frigidaire Refrigerator Ice Container Assembly Interfacesâ with the Ice Maker, Auger Motorand â¤Door Dispenser
- Common Failure symptoms and Diagnostic Indicators of⢠Ice âContainer Assembly Malfunction
- Compatibility, replacement Considerationsand Step-by-Step Installation and âTroubleshooting Procedures⤠for 241860801 Frigidaire â¤Refrigerator ice Container Assembly
- Q&A
- In Summary
Function and Role of the Ice Container âŁAssemblyâ in âthe Refrigeration and Ice-Delivery System
the 241860801 Frigidaire Refrigerator Ice âContainer Assembly serves as the intermediate storage and delivery interface between the ice maker module and the user-accessible dispenser or ice bin. It âis indeed a molded thermoplastic housingâ sized to accept ice from the maker, maintain a âlow-temperature habitat that minimizes melting and refreezingand present ice to the dispenser âmechanism⣠or door â˘chute. The assembly oftenâ integratesâ alignment tabs, a bearing surface or augerâ interface â¤(depending on model)andâ a sensor mount or mechanical⤠shutoff arm; correct fitment and orientation are required for reliable operation and forâ sensors and switches to register bin fullness accurately.
Functionally, the ice container directs⢠the âflow ofâ discrete cubes or crushed ice while minimizing bridgingâ and jamming. In normal operation the ice maker dispenses cubes into the container then a âfullness sensor halts production when capacity is âreached; during dispensing the container either rotates (auger-driven systems) or uses a gravity feed⣠with⣠a gate. Common failure modes include cracked housing, deformed mounting tabs, misaligned sensorsand â¤cold-air loss â˘at the door seal – each can produce symptoms such as continuous ice production, no-dispenseor frequent⢠clumping. â˘Practical service steps include verifying mechanical engagement of the bin withâ the ice maker, checking⣠the sensor⣠or micro-switch continuityand confirming that the container seats fully to prevent air infiltration.
- Primary features: molded âŁbin,mounting tabs,sensor/micro-switch interface,discharge gate âor auger interface.
- Behavioral notes: prevents bridging, supports full/empty sensing, routes ice to âdispenser.
- Compatibility considerations: must match model-specific mounting geometry and sensor positions to operate correctly.
| Item | Description |
|---|---|
| Capacity | holds a⢠model-specificâ volume of ice (varies by â¤refrigerator model) |
| Mounting | Model-specific tabs and slotsâ that align the bin with the ice maker and dispenser |
| Sensor⣠Interface | Mounts mechanical or optical sensors that detect bin fullness and âstop production |
How the 241860801 Frigidaire Refrigerator ice â¤Container Assemblyâ Interfaces with theâ Ice Maker, Auger Motorand Door âŁDispenser
The 241860801â Frigidaire Refrigerator Ice Container Assembly functions as theâ mechanical and sensing interface between the⣠ice maker harvest cycle, the auger motor driveand âthe door-mounted dispenser.⣠During a⣠harvest, the⢠ice maker dumps cubes into the binS collection well; the â˘bin provides a guided discharge throat and a recessed coupling socket â¤that âŁaccepts theâ auger motor’s splinedâ drive. Integrated mounting bosses â˘and alignment ribs locate the ice maker chute andâ the auger assembly toâ maintain axial and angular tolerance; the âcontainer also incorporates a sensor mounting point (optical window or micro-switch surface) used by the refrigerator control to detect low or full â˘conditions. Correct operation depends on consistent clearances so the auger can convey intact cubes without stallingand on accurate engagement of the motor â¤coupling â˘to transmit torque⢠without⤠gear slipâ or tooth damage.
Compatibility andâ practical âservicing âŁconsiderations focus on mechanical fit and unobstructed sensing: the â˘auger motorâ must match the container’s couplingâ geometry (spline count/diameter and depth), the discharge throat must align with the⤠door dispenser chute⤠to â¤avoid pinch points, âŁand theâ sensor aperture must be free of frostâ or ice build-up to report bin status reliably.⤠Common field checks include rotating the auger by â˘hand to verify free movement, confirming the drive coupling fully seats intoâ theâ bin socket, inspectingâ for cracks or warped flanges that introduce radial offsetand cleaning the sensor⤠window. âŁExamples: a 1-3⢠mm radial⣠misalignmentâ betweenâ a âreplacement bin and the auger shaft â¤commonly produces repeated motor overload trips; a⤠blocked sensor lens will prevent the dispenser from activating even if the auger and motor⤠areâ functional.
- Coupling fit: verify spline match andâ engagement depth
- Clearance: âensure axial and radial clearanceâ for whole-cube transport
- Sensor condition: check lens âor switch actuation path for frost/debris
- structural integrity: inspect for cracks, warped mounting tabsor deformations
- Dischargeâ alignment: confirm throat to door⢠chute alignment to prevent jams
| Item | Description |
|---|---|
| Ice maker interface | Mounting ribs and chute pocket position the harvest outlet over the collection well. |
| Augerâ motor interface | Recessed splined/socket coupling⤠and bearing surface transmit torque to the auger rotor. |
| Door dispenser interface | Dischargeâ throat geometry⤠and seal alignment â¤guide cubes into the door chute and affect dispenser reliability. |
Common Failure Symptoms and Diagnosticâ Indicators of Ice⢠Container Assembly Malfunction
The â˘241860801 Frigidaire Refrigeratorâ Ice Container Assembly serves as the receptacle and⢠mechanical interface between the ice maker module and âthe dispenser/auger system; it locates the ice,provides structural support,and presents an optical â˘or mechanical switch signal used by the â¤ice maker controller. âWhen fitted to the⢠intended⤠Frigidaire models,the assembly aligns the auger drive,bin microswitch,and any integrated sensors âso the â˘ice harvest,transport,and dispense⢠cycles occur without binding. Compatibility issues or physical â˘damage (cracks, deformed mounting tabsor â¤worn guide â˘rails) changeâ alignment⢠tolerances and commonly produce symptoms that resemble electrical or control module failures even though the root cause is mechanical misfit or obstruction.
Diagnosing functional failures of the ice container assembly requires⣠correlating observed behavior with likely component-level faults: for example,reduced yield or repeated partial harvests often indicates a frozen fill tube,failing water inlet valve,or an obstructed bin causing ice bridging; grinding noises during dispense point to auger âŁmotor wear or ice jamming; and persistent âŁerror codes or intermittent motor drive suggest poor switch engagement âor damaged wiring at the bin microswitch. Practical checks include âa visual inspection for ice bridging or cracked walls, confirming that âthe bin seats flush to the auger housingand verifying â˘that⤠the bail âŁarm or sensor trip engages consistently when the bin isâ placed. These targeted observations narrow the âtroubleshooting path and prevent unneeded â˘replacement âŁof the ice maker moduleâ when theâ containerâ assembly or its mountingâ is the primary cause.
- Little or â¤no ice production despite proper water supply
- iceâ clumping, bridgingor irregular cube shapes
- Grinding or scraping noises during âdispense
- Water pooling⣠under the bin or leaking âinto theâ compartment
- Intermittent dispenser operation âor false error codes
| Item | Description |
|---|---|
| No ice production | Couldâ indicate frozen fill tube, inlet valve failureor the â˘bin not engaging the harvest switch. |
| Ice clumping / bridging | Usually caused by temperature fluctuations,â misaligned binor lack of regular harvest cycles. |
| Mechanical⤠noise | Auger motor bearings, ice âjams in the binor contact between bin walls and rotating parts. |
Compatibility, Replacement Considerationsand Step-by-Step Installation andâ Troubleshooting Procedures for 241860801 Frigidaire Refrigerator Ice Container Assembly
The 241860801 Frigidaire Refrigerator Ice Container Assembly functions as the ice storage and delivery interface between the ice maker and the dispenser/auger â¤mechanism. It is a molded storage bin with alignment âtabs and gear engagement points that must match the freezer cavity and auger drive of the host refrigerator; mismatched tab geometry or gear pitch will prevent âproper seating or drive engagement even if the outer dimensions appear similar.⢠Technicians should verify the freezer cavity âmounting points, measure tab spacingand confirm whether the unit relies on âa passive storage bin or integrates an auger/gear segment before⢠ordering a replacement. A correct-fit⣠assembly preserves ice flow,prevents jams,and ensures âŁthat any ice-level⢠or door-actuated sensors remain positioned as intended by the manufacturer.
Installation and troubleshooting follow mechanical verification âand basic electrical checks. Disconnect power ⢠before removal to avoid motor actuation or sensor damage. Remove the old container by disengaging retaining tabs and sliding the bin clear; inspect the auger gear, bearingsand the bin for cracks or obstructions. On installation, âŁseat the bin so âalignment tabs fully engage, confirm the auger shaftâ meshes without excessive playand manually⤠rotate the auger to âcheck⢠for free movement.⣠If⢠the dispenser fails to move⤠ice, verify âŁfreezer temperature, clear any ice bridges, check continuity on the auger motor and âice-level sensor with a multimeterand confirm the control board âdrives the motor⤠under test conditions. Forâ persistent issues, document⤠symptoms (e.g., augerâ stalls, ice jamsor sensor faults) andâ compare against mechanical wear or incorrect part fit as the likely⢠root cause.
- Power off and remove the âold bin; inspect tabs, gearsand seal surfaces⤠for â¤wear.
- Align tabs and slide the new bin into position until it âaudibly seats; verify auger engagement.
- Manually rotate the auger to confirm free travel and âno interference from the bin walls.
- Restore power⤠and run a short âdispense/cycle to observe motor behavior and sensor responses.
- If jammed or noisy, clear ice, re-check alignment,⣠and measure motor/sensor continuity before replacing additional components.
| Item | Description |
|---|---|
| Part number | 241860801 â¤- â˘replacement iceâ storage bin designed for specific Frigidaire freezer mounting interfaces; verify fitment before installation |
| Material | High-impact molded plastic with integrated tabs and gear engagement surfaces |
| Mounting notes | Slide-in bin with alignment tabs; confirm tab spacing and auger coupling geometry to avoid mechanical interference |
Q&A
What⤠exactly is âpart 241860801 – the Frigidaireâ refrigerator âice container assemblyâ?
Part 241860801 is âthe ice container (ice bin) â¤assembly⢠used in manny Frigidaire/Electroluxâ refrigerators. It is the removable bin thatâ collectsâ and stores ice produced by the icemaker and, on dispenser models, provides the housing/connection⢠for the auger or dispenser drive.â Depending on the refrigerator model the â¤assembly â¤may include the bin, a cover/door,⢠and the auger housing interface.
How do I knowâ if 241860801 is the âŁcorrect replacement for my refrigerator?
Verify compatibility by matching⢠your refrigerator⣠model number (found⤠on the interior wall or door jamb) with the part compatibility list from Frigidaire or an authorizedâ parts dealer.You can also âcompare the old bin’s shape, mounting âtabsand auger/drive interface to pictures/specs for 241860801. If in doubt, provide your appliance model number to a partsâ supplier to confirm fit.
what are common signs âŁthe ice container assemblyâ is faulty and needs replacing?
Look for cracked âor brokenâ mounting tabs, warped or cracked plastic, a loose or misaligned auger interface, ice jamming/clumping in the binor inability âof the âdispenser auger to engage. Physical damage preventing the â˘binâ from seating flush or broken features where the ice maker dumps or âŁauger mounts areâ common reasons to replace the assembly.
Can⢠I install 241860801 myself? What are the basic replacement steps?
Yes – a competent DIYer or technician can replace âŁit.⢠Basic steps: 1) Unplug theâ refrigerator or switch âoff power.2) Empty the freezer shelf/area and remove the oldâ ice from the bin. 3) Remove â˘any trim or cover that â¤secures the bin (some models ârequire liftingâ the bin slightly and âŁpulling forward). 4)⣠Inspect the icemaker/auger components for damage. 5) Position the new bin so tabs and auger interface align, slide it into place until it seats/locks. 6) Restore power and⤠run a dispense âor diagnostic test. Follow your model’sâ service âmanual for any model-specific fasteners or clips.
How do I test the new ice container afterâ installation to ensure it’s working properly?
After âinstalling and restoring power, check that the bin sits flush and does not â¤wobble.⣠If the refrigerator has a dispenser/auger, operate the dispenser to confirm the auger âŁengages and dispenses ice⣠without binding. Run the ice maker’s harvest â˘cycle (or enter service diagnostics ifâ available) to ensure ice drops âŁinto the bin correctly and there are no leaks, jams, âor misalignments.
Howâ should I clean and maintain the ice container⢠assembly?
Remove the âbin periodically âŁand wash with warm water and mild detergent; rinse thoroughly. Avoid abrasive cleaners or scouring pads that can scratch âthe â¤plastic. Dry âwholly before reinstalling. Do not use strongâ chemical cleaners or bleach unless the manufacturerâ approves them.If ice âclumping is an issue, check freezer temperature (should be around 0°F / -18°C) and periodically empty/mix the ice to prevent large consolidated blocks.
Is the ice⢠container 241860801 dishwasher-safe?
Most ice bins âare not recommended forâ dishwasher use as high dishwasher temperatures and detergents âŁcan warp or discolor âŁthe plastic. Hand-washing âwith warm water and mild soap is â¤safer. Check the manufacturer’s instructions for âthe specific part if available.
Where can I buy âan â¤authentic 241860801 and should I choose OEM or aftermarket?
Purchaseâ from Frigidaire⢠authorized parts dealers, â˘major âappliance parts âretailersor the manufacturer’s website to ensureâ you get an OEM part. Aftermarket bins might⤠potentially⢠be less expensive but can vary in fitâ and material quality. For reliable fit, proper mounting of the auger interfaceand long-term durability, OEM is usually recommended.
In Summary
The 241860801 Frigidaire Refrigerator Ice Container Assembly serves a central role in the ice production and delivery system of compatible Frigidaire refrigerators. As the receptacle for produced⢠ice,⣠it helps maintain hygienic storage,â supports proper alignmentâ with the dispenserâ and auger âmechanismsand contributes to reliable ice dispensing. A correctly functioning âice container helps prevent jams,spills and contamination,and⣠supports overall appliance performance.
Because symptoms âŁsuch as âice jamming, leaking, unusual noisesâ or visible damage can arise from a range of causes, accurate diagnosis is⢠significant before replacing âthe â¤ice container. Verifying the⣠refrigerator model and part number, inspecting⢠the container for cracks or wearand confirming that the issue⤠is not caused by related components or settings âhelps ensure that replacement is the appropriate⣠correctiveâ action.When replacement is needed, choosing the correct⤠assembly (241860801 for â˘compatible Frigidaireâ units) and following manufacturer guidance restores fit and function more â¤reliably than⣠ad hoc repairs.
Whether handled by a trained serviceâ technician or a knowledgeable owner, proper replacement and post-installation testing maximizeâ the lifespan and safety of the refrigerator’s ice system. Prioritizing accurate diagnosis, correct part selection and careful installation helps minimize downtime and⣠avoid recurring issues, ensuring the appliance continues to operate as intended.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
