316558300 Frigidaire oven 9.5L ā¢Sealed Burner āis aā sealed ā¢gas āburner assemblyā¢ intended for use in compatible Frigidaire gas ovens adn range cooktops; it comprises the burner head and cap, mounting flange and sealand āthe ā¢interface for the igniter andā¢ gas delivery orifice. As a sealed-style component,it isā£ designed to minimize ingress of spills and debris into theā burner box while providingā the defined combustion surface and port pattern necessary for stable flameā£ production.
Inside the applianceā theā£ sealed āburner is the primary combustionā element that converts metered gas flow āinto controlled heat; it directly āinterfaces with the ā¤appliance gas ā¢manifold and valve, the ā¢spark or glow igniter, āthe oven temperature sensingā¢ and control systemand the ventilation/flue path. Proper function depends on correct orifice sizing and pressureā¢ at the manifold, intact seals and āmounting for safety and airflowand consistent āinteraction ā¢with the control module or thermostat that governs ignition timing and gas valve ā£actuation.
In this article readers will find a ā¤technical description of theā burner’s function and construction, guidance ā£on compatibility and how to verify fitā¤ with specific Frigidaire models, common failure symptoms (for example unevenā orā£ yellow flames, delayed ignition, soot deposits, gas odoror lossā of heat), practical troubleshootingā steps (visual inspection, port ācleaning, igniter ā£and continuity checksand gas pressure/valve diagnostics)and replacement considerations such as OEM partā cross-references, ā¤correct orificeā selection, sealing ā¢and mounting procedure, postāinstallation leak testingand safety and ā¤calibration checks to restore reliable operation.
Table of Contents
- Function ā£and role of the Sealed Burner āin Frigidaire 9.5L Oven Operation
- How the 316558300 Frigidaire Oven 9.5L Sealed Burner Works withinā£ the gas Delivery and Ignition System
- Common Failure Symptoms and Measurable Performance āIndicators for the Sealed ā£Burner Assembly
- Compatibility, Replacement Considerations, Installation Notes, ā¢and Troubleshooting Procedures for the Sealed burner
- Q&A
- To Wrap It Up
Function andā¢ Roleā of the Sealedā Burner in Frigidaire 9.5L Oven Operation
The 316558300 frigidaire Oven 9.5L Sealed Burner is aā¢ gas burner assembly engineeredā to contain the combustionā¤ zone and deliver a controlled flame pattern for consistent cooking power.ā Its sealed-base design isolates the burnerā£ ports and ignition electrode from ā¤the oven or range internal cavity, which reduces the ingressā¤ of foodā¤ debris and liquids that can alter air-fuel ā¢mixing or impair ignition. Functionally āthe part interfaces with the oven’s gas valve and orifice, positions the spark or hot surface āigniter at a defined gapand routesā¤ the flameā through calibrated ports so that heat output and distributionā remain ā£consistent with the appliance’s design specifications.
Operational behavior for this sealed burner includes āstable ignition, predictable flameā¤ geometryand resistance to corrosion or fouling compared with non-sealed assemblies. āReplacement or serviceā¤ requires matching ā£the burner to the appliance’s orifice size, ā£mounting flangeand igniter location; ā¤incorrect fit canā cause ā¤weak ā£flames, delayed ignitionor improper heat distribution. āTypical maintenance steps for technicians āare cleaning blockedā¢ ports, verifying igniter gap and continuityand performing ā¤a leak test at the gas connection. Examplesā of practical symptoms indicating burner issues include ā£persistent ā¤yellow-tipped flames, ā£intermittent ignitionor soot accumulation under the burner ā- these point toā port clogging, incorrect air mixtureor a failingā igniter rather than a control board fault.
- Primary functions: contain flame, protect ignition components, maintain airflow for correct combustion.
- Service checks: āport cleaning, igniter gap/continuity, secure mounting, gas connection leak test.
- Compatibility concerns: must match orifice size, mounting arrangementand igniter position for the model.
- Common faults:ā weakā flame, delayed ignition, ā£yellow flameorā excessive soot.
| Item | Description |
|---|---|
| Function | Directsā£ and ā¢stabilizesā the gas flame while protecting internal cavities from contamination. |
| Interface | mountsā to appliance flange and connects to the gas manifold and igniter assembly; part-specific fit required. |
| Common indicators | Intermittent ignition, yellow flameā¢ tips, sootor reduced heat output. |
| Service tip | Clean ports with non-corrosive tools, āconfirm igniter gap and resistanceand perform a gas-tightness check after reassembly. |
How the 316558300 Frigidaire Oven ā¤9.5L Sealed Burner Works within the Gas Delivery andā¢ Ignition System
The 316558300 Frigidaire Oven 9.5L ā¤Sealed Burner āis the primary combustionā component mounted under the oven floor that meters gas to ā¢the burner ports while isolating the gas train and ignition ā¤components ā£fromā foodā¤ debris andā£ oven spills. In operation, the oven’sā gas āvalve delivers pressurizedā¤ gas intoā£ the burner tubeā where the sealed burner’s ports distribute ā¢it evenly; ignition is providedā by the oven’s spark āelectrode or hot-surface ignitorā¢ positioned adjacent to the ports. The sealed design does not change theā combustion chemistry but reduces the risk of flame disturbance ā¢from spillsā and limits āsoot and grease accumulation on the manifold and ignitor,which helps ā¢maintain reliable ignition timing and consistent heat output over time.
Functionally, āthis āsealed burner must match the oven’s ā¢gas type, manifoldā pressureand ignition system-manny installations useā¢ it with natural gasā and permit conversion to LP only when the correct orifice and regulator adjustments areā¢ made. Technicians should āconsider gas ā¤flow behavior (adequate manifold pressure, clean orifices) and ignition behavior (correct electrode gap, secure wiringand expected ignitor āresistance) āwhenā diagnosing intermittent lighting or uneven flames. Practical checks include verifying that the burner ports areā unobstructed, confirming theā ignitor reaches the required temperature or spark energy for ignitionand ensuring the burnerā¢ gasket seals the cavity to preventā£ backflow of heat ā£and debris into the manifold.
- Features: sealed construction to ālimit contamination; ported tube for even fuel distribution.
- Compatibility: ā£designed for the oven’s specifiedā gas type; conversion requires correct ā£orifice and regulatorā settings.
- Common service checks: electrode gap and groundingorifice cleanliness, āignitorā continuity/resistanceand manifold pressure verification.
| Item | Description |
|---|---|
| Location | Under oven floor,ā£ attached to manifold and āpositioned with ignitor orā¢ electrode. |
| Primary function | Distribute metered gas to ports and maintain a sealed interface to protect ignition components. |
| Compatibility | Works with the oven’s specified gas type; ā¢conversion to LP requires orifice/regulator change. |
| Troubleshooting cues | Clogged ports,weak ignitionā spark/hotā ignitor,or poor gasket sealing causeā£ misfires or uneven flame. |
Common Failure Symptoms and Measurableā¤ Performance Indicators for the Sealedā Burner Assembly
The 316558300 Frigidaire Oven 9.5L Sealedā Burner is a module that provides the primaryā gas/air mixing and ignition interface for the oven ācavity; its sealed design limits food ingress ā£and āstabilizes the burner ports for repeatable ā£combustion. In normal āoperation āthe assembly must deliver a stable, centrally located blue flameā across āthe burner head,ā£ allow consistent spark or hot-surface ignitionand interface mechanicallyā£ and electrically with the oven āgas valve, igniter or spark moduleand oven control. Compatibility āconsiderations include correct mounting orientation, āport pattern matching to ā¢the ovenā¤ manifoldand electrical connector types – incorrect mating ā¤can cause delayed ignition, flame liftor intermittent operation evenā£ if the physical part fits theā£ oven cavity.
- Delayed ignition orā prolonged sparking after opening the gas valve.
- Yellow ā£or sooting flame indicating ā¢incomplete combustion or clogged ports.
- Intermittent flame or loss of flameā£ during cycle ā(possible thermocouple/valve interaction).
- Visible damageā or deposits on burner ports that alter āflame shape.
- Electrical failures: no continuity or out-of-spec resistance in igniter circuits.
| Item | Description |
|---|---|
| Ignition time | Measured interval from valve opening to steady flame (seconds); measurable with a stopwatch during a controlled test cycle. |
| Flame characteristic | Visual assessment of color, heightand lift; blue, steady flames with minimal ā¤yellow tipping indicate āproper air/fuel ratio. |
| Electrical ācontinuity | Resistance/continuity of igniter or spark ā¤circuit measured withā a multimeter; compare readings to the appliance ā¢service ādata. |
Techniciansā evaluate the sealed burner by correlatingā symptoms to measurableā indicators: for example,a consistent ignition delay of several seconds points to a weak igniter or reduced gas pressure,while a yellow,sooting flame ā¢with normal ignition time āfrequently enough indicates restrictedā¤ ports or incorrect primary air.Practicalā checks include running a timed ignition test, āinspecting and cleaning port āorifices, measuring igniter ā¢resistanceā£ and supply voltage during the ignitionā event,ā¤ and verifying manifold pressure withā£ a manometer; these procedures help distinguishā electrical faults from mechanical obstruction ā¢or gas-supply issuesā without relying on trial-and-error replacement.
Compatibility, Replacement āconsiderations, Installation ā¢Notesand Troubleshooting Procedures for the Sealedā¤ Burner
Theā¢ 316558300 frigidaire Oven 9.5L Sealed Burner is a sealed cooktop burner assembly designed toā¢ contain spills while āproviding a stable mounting āinterfaceā¤ for the burner cap, electrode/igniterand orifice. Compatibility requires ā¤matching the burner’s mechanical mounting pattern, gas typeā¤ (natural or propane)and orifice sizeā to the oven’s manifoldā and valve assembly; technicians should confirmā¤ these parameters against ā¤the oven model and service manualā£ before ordering aā replacement. Replacement considerations include ā£verifying the igniter/terminal connector type, checking ā¤that the burner cap seats flat on the sealed āpanand ensuring āthe orifice and regulator settings correspond to the intended āgas type-using an āincorrectā orifice or mating valve can cause low output, yellow flames,ā or unsafe āpressure conditions.
- Symptom: Yellow orā sooty flame ā- check orifice/gas type and primary air adjustment.
- Symptom: Intermittent ignition/clicking -ā£ inspect electrode ā£gap, connectorand grounding of theā¢ sealed pan.
- symptom:ā Uneven ā£flame ports – āremove cap andā¤ cleanā ports; replace warped caps or clogged ports.
- Installation check: confirm manifold pressure and perform a leak test after reassembly.
| Item | Description |
|---|---|
| Gasā type | Confirm NG or LP compatibility and correct orifice; conversions ārequire matched āorifice āand regulator adjustments. |
| Mounting interface | Match screw pattern and pan cutout dimensions to ensure ā¤proper seating āand electricalā¢ grounding of the igniter. |
| Igniter interface | Verify connector type, electrode gap (typ. 2-3 mm)and continuity; replace electrode ā¤ifā cracked or corroded. |
| Seal and gasket | Inspect pan seals andā gasketsā¤ for damage;ā replace ā¤seals to maintain spill protection and prevent debris entry. |
Safe installation requires isolating both theā£ gas and electrical supplies, removing the oven top āor access panel ā¢to reach āthe sealed panand keepingā¢ fastener torque consistent to avoid distortingā the pan or burner flange. After swapping the burner, performā an ignition and flame-shape test at each burner setting and conduct aā soap-bubble or electronic gas-leak check at the fittings and orifice ā¤connection. For diagnostics, use a āmultimeter to confirm ā¤igniter resistance and valve coil continuity, a āmanometer to verify manifold pressure if flame ā¤characteristics are āabnormaland visual inspection forā£ hairlineā warping ā¤or clogged ports that commonly cause uneven heat; replace āthe burner assembly if structural deformation or āpersistent ignition āfailure remains after cleaning ā£and adjustment.
Q&A
What is ā¤part number 316558300 and which appliances does it fit?
Part numberā¤ 316558300 is a Frigidaire sealed burner assembly identified for the large (often referred to as 9.5) cooktop burner on certain Frigidaire ranges and stoves. Exact fitment varies by model year āand series,so always confirmā compatibility by entering your appliance model number on Frigidaire’s parts lookup or byā checking the range’s parts diagram before purchasing.
How ā£do I safely remove and replaceā the 316558300 āsealed burner?
Turn off the range’s ā£power and gas supply before starting. Remove grates and āburner caps, then lift off the burner head; for sealed burners youā may need to unfasten a retainingā screwā£ or gently pry the burner off its mounting. Disconnectā¤ the ā¤electrode/ignition lead ā¤and any retaining clip, replace with the new assembly, reconnect the wire, seat the burner head and ā¢cap,ā¤ and re-install grates. Reconnect power and gas and test ignition. if you’re uncomfortable working with gas or ā¤electrical components, hire a qualified serviceā¤ technician.
My ā¤new burner āisn’t sparking or igniting ā¤- whatā should Iā check first?
confirm power to the rangeā£ and that the ā£sparkā£ moduleā£ is functioning by listening for the clicking when a burner knob is turned. Inspect and clean the spark āelectrode and surroundingā area (food debris or moisture can āshort the spark). Check the ā£wire connection to the electrode and swap wires with a working ā¢burner (ifā£ safe to do) to isolateā£ whether the ā£electrode, spark moduleor ā£gas supply is ā£atā£ fault. ā¤If there āis spark but no gas flow, check the valve and gas supply; ā¤if there’s no spark at all, the ignition module or wiring mayā¤ need service.
Howā¢ should I clean the 316558300 sealed burner without damagingā it?
Let the burner cool completely. Remove caps and heads and soak the caps in warm soapy water;ā¢ brush gently with a nonabrasiveā¢ brush to āremove debris from ports. Wipe the burnerā base and electrode with a damp cloth-do ānot immerse sealedā¤ electrical parts or āthe electrode in water.ā£ Ensure all ports are clear and dry before reassembly.ā Avoidā harsh āabrasives or ā¢corrosive chemicals that can damage theā¢ finish or the āelectrode.
Why is āthe flame yellow or uneven on this sealed burner āand how do I fix ā£it?
Aā healthy burner flame should be mostly ā¢blue with a smallā inner blueā£ cone. Yellow or ālifting flames indicate clogged ports, food/debris ābuildup, incorrect burner cap ā£seatingor in rare cases an issue with gasā£ mixture/pressure. Clean ports and ensure āthe ā£burner cap is properly āseated. If cleaning doesn’t fix it, have a qualified technician checkā the gas regulator and supply pressure and confirmā£ the rangeā¤ is configured forā the correctā¢ gas typeā¢ (natural ā¢gas vs. LP).
Can I adjust the heat outputā of the 316558300ā¤ sealed burner or replace the orifice to change BTUā¢ rating?
Heat output is ā¢primarily controlled by the range’s gas valve and āorifice size. While technically you can change an orifice or adjust regulatorā settings, this should āonly be done āby a qualified technician as gas type, safetyand local codes matter.ā Do not ā¢attempt to alter orifice size or regulator settings yourself unless you have the ācorrect partsā andā training. For differentā¢ BTU requirements, source the correctā orifice and follow manufacturer āinstructions.
How do I test āwhether ā¤the ignition electrode or spark module is bad?
With theā range turned on and handled safely, observe whether āthe electrode āsparks when a knob is turned; theā¤ igniter should produce a visible sparkā at the electrode tip. Ifā there’s no spark, first check wiring ā¤and fuses. To isolate āthe fault,ā£ swapā the electrodeā lead with a working burner’s lead (if accessible) to seeā if the problem moves with the leadā (indicating ā£module/wiring) or stays with āthe burnerā¢ (indicating electrode/assembly). For hot-surface igniters (not common on sealed cooktop burners),ā¤ specific resistance checks apply-consult a technician or service manual for correct ohm values.
Where can I buy an authentic 316558300 replacement and are there aftermarket alternatives?
Buy OEM 316558300 assemblies from Frigidaire authorized parts ādealers, official Frigidaire parts websitesor reputable appliance parts stores that allow model verification. Aftermarket parts exist and may be less expensive,but compatibility,fit,and safety certifications can vary.Alwaysā¢ verify return policiesā¢ and seller ā¤reliabilityand prefer OEM or well-reviewed aftermarket parts that explicitly list compatibility with your ā¢appliance model.
To Wrap It Up
The 316558300 Frigidaire Oven 9.5L sealed burner plays a key role in delivering consistentā heat, protectingā£ internal components from spills and debrisand maintaining the overall performance and safety of the oven.As an integral replacement component, its ā¤proper āfit and functionality contribute to even ā¢cooking results and āhelp preserveā the appliance’s longevity and reliability.
Accurate ādiagnosisā¤ and timely replacement āare important āto avoid unneeded ārepairs and to restore safe, efficient operation. Identifying genuine symptoms of burner failure, confirming part compatibilityand choosing āthe correct āreplacement help prevent recurring issues. Where appropriate, ā£professional inspection and installation ensureā the component ā¤isā fitted andā tested according to manufacturer expectations.
When service is required, selecting the correct 316558300 Frigidaire Oven 9.5L sealed burner and following recommended ā¤service practicesā provides theā most reliable outcome. Thoughtful assessment and proper āreplacement not only address immediateā¢ performance concernsā£ but also support long-term appliance safety and efficiency.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
