316272000 Frigidaire âigniter and Orifice Holder is an integratedâ ignition and gas metering⤠component⢠used in Frigidaire gas cooking appliances.⢠The assembly combinesâ theâ mechanical fixture that secures the â˘burner orifice with⢠the âŁignition⣠element (spark electrode or hot-surface igniter) and â˘itsâ electrical interfaceand isâ typically âconstructed of heat-resistant metals and âŁinsulatorsâ to withstand repeatedâ thermal âcycling and combustion exposure.
Inside â¤the appliance, âthis partâ interfaces directly with the burner head, the manifold or â˘gas valve that supplies âŁpressurized gasand the ignition/control module that provides the electrical energy for ignition. Its orifice âcarrier positions and seals the gas jet to set the correct flow rate toâ the burner ports, while the igniter provides the energy⤠or ionization path to light that âŁgas and, in many âsystems, to detect flame â˘presence. Proper alignment,⣠sealingand electrical continuity of the âŁassembly are therefore critical to safe ignition, âstable combustionand⣠reliable operation of the âappliance.
In âthis article readers⤠will find a â¤technical⣠overview of the 316272000 assembly covering its function and typical locations of use (gas ranges, ovensand cooktops), guidance âon model compatibility and part-number cross references, commonâ failure⢠symptoms to watch for âŁ(for âexample no ignition, delayed â˘ignition, âgas odoror⤠visible damage)and a high-level discussion of â˘troubleshootingâ checks such as⢠visual inspection and â¤electrical continuity testing. The article will â¤also outline replacement considerations-matching âspecifications, connector typesand sealingâ practices-and note safety checks âthat technicians⢠and ownersâ should planâ for when servicing this component.
Table of Contents
- Function and Role of⤠the Igniter and Orifice â¤Holder in Gas Burner Operation
- Howâ the 316272000 Frigidaire Igniter â¤and Orifice Holder Integrates⤠with the appliance Gas â˘and Ignition Systems
- Diagnostic Indicators and common Failure Symptomsâ of the Igniter/Orifice âŁAssembly
- Replacement Considerations,â Compatible Models, âŁandâ Step-by-Step Installation Guidance
- Q&A
- Insights and⣠Conclusions
Function and Role of the Igniter and â˘Orifice⢠Holder⤠in Gas Burner Operation
The 316272000â Frigidaire â˘Igniter âand Orifice Holder combines the⢠ignition electrodeâ and âthe gas âmeteringâ port into a singleâ serviceable assembly that both produces the ignition spark and locates the orifice⤠precisely at the⢠burner inlet.â The igniter generates the high-voltage discharge (or a continuous⤠glow element on some⣠designs) while the orifice holder secures the jet â˘and⤠maintains the âcorrect âalignment and seal against the burner head; misalignment or wearâ of â¤either element commonlyâ causesâ ignition failures or unstable flame patterns. This OEM-style assembly is intended for use on âŁcompatible âFrigidaire gas âcooktops and is designed â˘toâ match factory mounting⢠points and gas passage geometry,⣠but technicians should verify screw locations, electrical connector typeand orifice âsizing beforeâ installation to ensure proper fit and performance.
In service, the two components behave as an integrated⣠ignitionâ system: the electrode tip position â˘relative to the orifice port âŁdetermines spark consistency and flame lift, â¤while â¤the orifice diameter and cleanlinessâ control flow rate and flameâ shape. Typical⢠fault indicators include intermittent⣠sparking from a â¤cracked ceramic insulator, âcontinuous clicking with no ignition⢠(electrode damage or misalignment), âorâ weak/yellowâ flame âcaused by a âpartially blocked orifice.During âtroubleshooting, â¤inspect the electrode for pitting, confirm the electrode gap âand mounting stability, â¤and clean âor â¤replace the â˘orifice if âdeposits restrict flow. Replacing the entire 316272000 assembly often restoresâ reliable operation whenâ both ignition and metering show signs of wear, avoiding repeatedâ service visitsâ caused byâ mismatched⢠components.
- Common symptoms to look for:â noâ spark, delayed ignition, weak or sooting flame, loose or corroded⤠mounting.
- Key service checks: electrode⣠condition, gap andâ alignment,â orifice cleanliness,⣠and secure â¤mounting âŁtoâ the⤠burner head.
| Item | Description |
|---|---|
| Spark gap | Typically aroundâ 2-3 mm between electrode tip and target; exact gap depends âŁon model⤠and should be⤠measured during⤠service. |
| Orifice size | Varies âby appliance âand fuel (natural gasâ vs. LP); common natural gas jet sizes range approximately⤠0.6-0.9 mm-confirm stamp or service documentation. |
| Mounting â¤interface | Factory-aligned tab and screw⤠pattern to locate the assembly reproducibly on Frigidaire burner âheads. |
| Materials | Ceramic-insulated electrode with âstainless⢠steel/brass holder âcomponents⢠for thermal âandâ corrosionâ resistance. |
How the â316272000 Frigidaire âIgniterâ and âOrifice Holder Integrates with the appliance Gas and Ignition Systems
The 316272000⢠Frigidaire Igniter⢠and Orifice holder serves as the⣠mechanicalâ and electrical interface between the oven⣠manifold,burner ports,and â˘the ignition âsystem. It⤠secures âthe gas orifice in a â˘fixed position â¤relative to the burner slots while providing a âŁstableâ mounting and insulated feed âfor the igniter electrode or hot surface element. Proper alignment set by the holder creates the correct âgas âjet⤠geometry and placesâ the igniter â˘within the gas/air⣠mixture so the ignitionâ energy (spark⢠or â˘heat) reliably lights the burner; misalignment, a clogged orifice,⤠or damaged insulation alters âŁflame shape,⤠causesâ delayed ignitionorâ permits unintended arcing⢠to chassis components.
Functionally, the part couples to theâ manifold to deliver metered âgas and couples electrically to the oven control âor â¤spark module through an insulated lead or connector, so both gas flow and ignition âtiming are coordinated.⣠Typical service checks include⤠verifyingâ the orifice is unobstructed, confirming⤠theâ electrode-to-orifice spacing and orientation match service specifications,⤠and checking that the igniter feed shows expected continuity⢠and insulation to ground. Practical field outcomes include restoring⤠consistent ignition and correct flame profile after âŁreplacing âa deformed holderor diagnosing âcontinuous⤠spark/clicking when the holder’s âŁceramic â¤insulator is cracked or âthe orifice has shifted.
- Mechanical alignmentâ of orifice to burner ports
- Sealedâ connection to manifold⤠to maintain metered gas flow
- Insulated electrical support for electrodeâ or igniter element
- Thermal and chemical resistance for prolonged exposure⤠to combustion
| Item | Description |
|---|---|
| Mounting interface | Secures to the manifold/burner box and positions⣠the orifice and igniter precisely. |
| Primary role | Aligns gas jet and ignition sourceâ to ensure reliable ignition and correct flame shape. |
| Common failure âsymptom | Delayed ignition,continuous clicking,weak or sooty flame,or gas odor near âŁburner. |
Diagnostic⢠Indicators and âŁCommon⣠Failure symptoms â˘of â¤the Igniter/Orifice Assembly
The 316272000 Frigidaire Igniter and Orifice â˘Holder is an integrated service item that performs twoâ coordinated functions: the âigniter provides the thermal energy required to initiate combustionâ and the orifice holder positions and seals the gas orifice to â¤the manifold so â˘that a âcontrolled jet⤠of fuel reaches the ignited area. In operation the igniterâ heats to a visible⤠glow and the⢠appliance â˘controlâ times the⤠gas valve opening to âcoincide with adequate emitter â˘temperature; a âweak or slow-to-heat âŁigniter canâ prevent the âvalve from opening or cause repeated shutoffs.⤠Theâ orifice holder must match the manifold geometry and orifice size⤠for correct BTU delivery; âŁa mismatchedâ holder â¤can change local âŁflow âcharacteristics and create under- or â¤over-firing conditions even â¤if â¤the igniter itself is electricallyâ healthy.
Technicians diagnose â¤failures by combining observable flame behavior, electrical measurements,⤠and a âfocused visual inspection of the assembly and seat. âŁCommon symptoms⤠include delayed ignition orâ repeated clicking, âŁa âsustained yellow or liftingâ flame (sooting), intermittent lighting,â or complete lack of glow â˘from the igniter. Mechanical indicators âsuch as âŁcarbon buildup âŁin the orifice, warped orifice seating, brokenâ ceramicâ on the igniter, âor loose wiring are frequently theâ root â˘causes. âA methodical⤠check sequence-verify secure electricalâ connectors⤠and proper insulation, test the igniter for continuity and proper resistance trendand confirm âthe orifice is free of obstruction âand correctly â¤seated-differentiates igniter malfunctions from gas-valve âor manifoldâ pressure âissues andâ guides appropriate replacementâ or cleaning actions.
- Delayed or no ignition: igniter weak or open⣠circuitorifice clogged⢠or âmisaligned
- Yellow/sooty flame: incomplete combustion from restricted âorifice or incorrect orifice sizing
- Intermittent⤠flame or clicking: loose⣠electrical connection or thermal cycling failure⣠of igniter
- Visible damageâ or corrosion: physical â¤replacementâ recommended
| Item | Description |
|---|---|
| continuity test | Open circuit indicates âŁigniter element failure; âreplace assembly if wiring and harness⤠are confirmed⣠good |
| Ignition timing | Measure time from glow â˘to âgas flow; excessive delay suggests weak âigniter or control sequencing fault |
| Visual inspection | Check for crackedâ ceramic, âcarbon â¤in orificeand secure seating of the holder |
Replacement Considerations, Compatible Modelsand Step-by-Step Installation Guidance
The⣠316272000 Frigidaire Igniter⣠and âOrifice Holder is⤠an⢠integrated component that alignsâ the ignition electrode with⤠the burner orifice and secures the gas⤠metering element in place. The igniter âprovides the âhigh-voltage⣠discharge thatâ initiates âcombustion while⤠the orifice holder locates the â˘orifice and seals the gas â˘flow path at the valve outlet; â¤any â¤misalignment, carbon âbuild-up in âthe orifice, âŁcracked ceramic,⤠or degraded electrode tip will alter âŁspark geometry or reduceâ gas â¤velocity and⤠can âcause â¤intermittent ignition, weak flameor delayed lighting.⢠To confirm compatibility, match the⢠OEM partâ number, electrical connector⣠typeorifice âdiameterand mounting hole pattern âto the appliance service sheet or⢠parts diagram rather than relying solely on model year or rangeâ family names; physical measurements and theâ valve outlet interface determine functional interchangeability âmore reliably than⢠model⤠labels alone.
Replacement âandâ installation require safe isolation of the appliance, â˘careful handling of fragile ceramic and electrode surfacesand verification of gas⢠sealing after reassembly. Beginâ by⤠shuttingâ off the gasâ supply andâ disconnecting power,then remove âthe burner âassembly and note the orientation of the electrode and orifice holder; during âinstallation avoid touching the âelectrode tip⢠andâ ensure the orifice faces the âvalve⣠outlet with the holder seated flush to â¤preventâ leaks. After reassembly, âperformâ a controlled leak check â˘at âthe valve and test severalâ ignition cycles to confirm consistent âspark⢠and flame; if ignition is stillâ inconsistent, inspect the âorifice for âobstruction and measure â˘spark gapâ and â˘electrode continuity as âdiagnostic â˘steps.
- Shut offâ gasâ and disconnect electrical âpower.
- Remove âgrates and âburner caps, document original âorientation.
- disconnect igniter wiring; remove retaining screws â˘and extract the assembly.
- Clean surrounding⣠area,inspect orifice âand electrode; replace âif damaged.
- Install new⤠316272000 Frigidaire Igniter and Orifice Holder, âsecure fasteners, âreconnect wiring.
- Restoreâ power â¤and gas, perform âleak⢠checkand⣠verify multiple⤠ignitions and flame quality.
| Item | Description |
|---|---|
| Common failure â¤modes | Cracked ceramic insulator, corroded electrode,⢠clogged âorifice, âŁloose mounting |
| verification checks | OEM part number,â connector typeorifice diameter, mounting hole spacing |
Q&A
What is â˘the Frigidaire part 316272000 (Igniter âŁand Orifice Holder) and what does it do?
The 316272000 is an OEM â˘igniter âand orifice holder assembly used on many âFrigidaire gas ranges/cooktops. Theâ igniter provides the heat or⤠spark to light the burnerand the orifice holderâ secures the gas orifice (jet) that meters âthe flow of natural gas or â˘LP â˘to the burner.Together the⣠assembly ensures âreliable ignition and correct gas â˘delivery for safe burner operation.
Howâ doâ I know if⢠the 316272000 assembly is⣠failing?
Common symptoms⣠of failure include a burner that won’t ignite, anâ igniter that won’t glow or spark, unusually long ignition timesor â˘a burner that lightsâ intermittently.⢠If the igniter glows âbutâ no â¤gas flows, the orifice â˘may be clogged or the⤠gas valve may ânot be⢠opening. If â¤thereâ is⣠no glow andâ there âŁis no voltage at the âharness, the igniter is likely âbad or there is an â˘electrical problem.
How can Iâ test the igniter â¤portion â¤before âreplacing the entire â¤assembly?
First disconnect electrical power and follow safety âsteps. Useâ a â˘multimeter to check for continuity across the igniter; âŁan⣠open circuit indicates a failed element. For a more definitive test, measure the current âdraw with the burner calling for⤠gas âŁ(an ammeter inâ series) and compare it to the specification for that igniter or⣠to a known-good part-an igniterâ that draws significantly less âŁcurrentâ may ânot allowâ the gas valve âto âopen. Also verifyâ that â120⣠VAC (or theâ appliance-specified âvoltage) â˘is âŁpresent at the⢠igniter connector âwhen the burner âis turned â˘on; loss âof voltage points to wiring or the control, not â¤the igniter.
Can I cleanâ theâ orifice rather of replacing the â˘entire â316272000 assembly?
Yes, if the orifice is simply clogged⤠by â˘debris or âgrease â˘it can sometimes be cleaned with compressed â˘air or aâ soft-bristleâ brush. âDo â˘not âŁuse aâ wire or drill âŁto enlargeâ the orifice. If the igniter âelementâ is⢠also⢠weak or âŁdamaged, âŁreplacement of the whole assembly is recommended because ignition âŁproblemsâ canâ be âcaused â¤by either component âŁand parts are often sold âtogether for a⤠reliable â˘repair.
Is the 316272000 assemblyâ specific to ânatural gas âor LP (propane)?
The holder â˘accepts a gas orifice⤠sized for the fuel⤠type. The assembly itself is used â˘on either âfuel type,⢠but you must install the correct⣠orifice for natural⤠gas orâ LP. Converting a range between fuels typicallyâ requires⢠changing⤠the âorifices and adjusting or replacing â˘the⤠regulator per theâ manufacturer’s âconversion instructions. Always use the correct orifice size â˘and follow the appliance’s âconversion procedure or hire a â¤qualified technician.
How challenging is it â˘to replace theâ 316272000, âand âwhat safety steps âshould I follow?
Replacementâ isâ a â˘moderate⢠DIY job ifâ you â˘are comfortable working with âgas and household electrical circuits. Stepsâ include: shut off powerâ to the appliance, shut off the gas supply, remove burner grates and cooktop partsâ as needed, disconnect the igniter wiring harness, unfasten the⤠mounting screws, swap the assembly, reconnect wiring, restore gas and powerand test forâ correct âignition and âgas âleaks (use soapy water or a certified gas leak âdetector at fittings).â If you⣠are not experienced with gas âappliances, hireâ a licensed technician-incorrect⢠installation⣠canâ be âhazardous.
Afterâ replacing the assembly, the⤠burner still won’tâ light-what should I âcheck next?
Verifyâ thatâ the correct orifice is âinstalled and not blocked, confirm â˘theâ igniter is receiving theâ correct â˘voltage â¤when⢠the âcontrol is⢠on,â and check that theâ gas â˘valve is functioning. Inspect wiring and harness connections for damage or â¤loose â˘connections. If voltage is⣠present and⣠the igniter⢠glows but the valve does ânot open,⣠the âgas valveâ may be faulty.If you detect the smell of gas or suspect a leak, stop and call a professional promptly.
where can Iâ confirm compatibility and buy a âgenuine 316272000 replacement?
Confirm compatibility by checking your appliance model number (usually on a tag behind the door, under the cooktop, âor on theâ appliance back) against âŁthe âpart listing from Frigidaire/Whirlpool partsâ diagrams⢠or⢠authorized parts distributors. âŁPurchase from â¤authorized dealers, the manufacturer’s parts store,â or reputable appliance â¤parts â˘retailers to ensure you get a genuine OEM part and access to correct installation documentation.
Insights and Conclusions
The 316272000 Frigidaire igniter and orifice holder serve aâ fundamental role in gas â˘cooktop and range operation by initiating combustion and correctly positioning the â¤gas orifice to ensure a controlledâ fuel flow. When functioning properly, this assembly supports reliable ignition, consistent⤠flame characteristics⣠and efficient⤠heat delivery. Because it interfaces directly with the⢠gas supply and⤠ignition system,⤠its condition âhas⤠a direct impact âon appliance performance, energy âefficiency and user safety.
Accurate diagnosis is essential when âignition â¤problems⤠or irregular â˘burner behavior⣠arise. Symptoms such as delayed or failed ignition, persistentâ clicking,⤠uneven âorâ yellow flamesor theâ odor of⣠gas warrant â˘systematic troubleshooting-visual inspection, â¤electrical continuity testing of the igniter âand verification âof correct orifice seating-performed in⤠accordance with manufacturer â˘guidelines. Proper diagnosis helpsâ distinguish between replaceable component faults and issues that require attention to⣠wiring, âgas valves or other system elements, avoiding unnecessary parts replacement and reducingâ serviceâ time.
When replacement isâ necessary, using âŁthe correct 316272000 Frigidaire partâ and following recommendedâ installation procedures restores â˘intended performance and⤠maintains safety and compliance withâ the appliance design.Whether performed⢠by a qualified technician orâ a learned DIYer, replacement shouldâ include⤠verificationâ of flameâ quality âand leak-free connections. Timely, properly executed repairs help ensure dependable operation, prolong appliance life and minimizeâ safety risks associated withâ faulty ignition components.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
