297216600 Frigidaire Refrigerator Defrost Thermostatâ is⣠a temperatureâactivatedâ switching device used in the defrost âŁcircuitâ of Frigidaire refrigeration âŁappliances. It is a small, typically bimetal â˘or temperatureâsensing switch that âmounts to âthe âevaporator or âits tube and changes state based on coilâ temperature; in ânormal operation itâ allows current â¤to the defrost heater when the evaporator is cold and interrupts the heater â˘circuit once the coil has â¤reached the defrostâ terminationâ temperature.
Inside the appliance âŁthe defrost thermostat is an integralâ part â˘of â˘the automatic âŁdefrost subsystem â˘and interfaces â¤directly with the defrost heater and âthe timing/control â¤module or electronic controlâ board. âIt is wired in series⣠with the heater so that defrost heat is applied only âŁwhen⢠the⢠thermostat âindicates âthe evaporator is âat â˘or âbelow theâ activationâ threshold and is⣠removed âwhen⣠the coil reaches⢠the termination threshold. As it⤠senses â˘evaporator⣠temperature at the âcoil surface,â its mounting location â˘and âthermal contact â˘are critically important;⤠failures or âpoor contact â˘can cause extended âfrost buildup, incomplete âdefrost cyclesor unneededâ heater operation, which â˘in turnâ affect evaporator âairflow, compressor âcyclingand⤠overall thermal performance.
In the followingâ article readers will find a technical overview âof the 297216600⤠defrost thermostat’s âoperating principle and specifications,⢠guidance on â˘model compatibility and how to verifyâ the correct replacement, common failure⤠symptomsâ and diagnostic techniques (including â¤continuity checks and⣠temperatureâresponse testing), â¤and practical â¤troubleshootingâ and replacement considerations such⣠as electrical⤠ratings, mounting method, harness connections, âandâ safe service âŁprocedures. The information⣠is presented toâ assist technicians, engineersand experienced applianceâ owners in âaccurately⤠identifying faults and making informedâ repair orâ replacement decisions.
Table ofâ Contents
- Function and Roleâ of the Defrost Thermostat in⣠Frost-Free Refrigerator Systems
- How the â297216600 Frigidaireâ Refrigerator Defrost⣠Thermostat Operates Within the Defrost Control Circuit
- Common Failure âSymptoms and Diagnostic Tests⤠for the Defrost â¤Thermostat
- Replacement Considerations, Model Compatibilityand Step-by-Stepâ Installation for⤠the Defrostâ Thermostat
- Q&A
- The Way Forward
Function and Role of the â˘Defrost Thermostat in⢠Frost-Free âŁRefrigerator Systems
The 297216600 âFrigidaire Refrigerator⤠Defrost thermostat is a âŁtemperatureâsensing switch that directly⣠controls theâ defrost heater circuit in frostâfree â˘refrigerator â¤systems. It is indeed mounted to theâ evaporatorâ coil â¤so the sensor⢠bulb accurately follows coil⣠temperature; electrically it is placed âin series with the âheater and⤠remains closed at⤠low evaporator temperatures âŁto allow the heater to energize during aâ timed defrost, âthen opens at â˘a⤠predetermined warmer temperature âto â¤terminate the â˘defrost cycle âand protect âthe⤠coil and⤠surrounding insulation from overheating.
- Typical diagnostic cues: heaterâ circuit⤠has no⤠continuity when the evaporator is cold indicates an open or failed thermostat; continuity when the coil is warm indicates a thermostat stuck closed.
- Functional features:â directâmount sensor âbulb, temperatureâactivated â˘open/close behaviorand rated voltage/current âmatching âthe OEM defrost heater circuit.
- Installation note: correctâ clamp location and matching trip⤠characteristics are âŁrequired to⢠preserve defrost timing and prevent repeated ice buildup or premature termination.
| Item | Description |
|---|---|
| Type | Temperatureâactivated âŁthermalâ switch (normallyâ closed at low⤠temperatures) |
| Function | Allows current to defrost heater when coil is frozen; opens âŁto stop heating whenâ coil warms |
| Replacement considerations | Match trip ârange,terminal⤠type,mounting clamp,and electrical rating to the originalâ part |
For⤠practical troubleshooting,use a multimeter to⣠check â¤continuity acrossâ the⤠thermostat while the sensor bulb is heldâ against a cold â˘surface⤠(simulating an iced coil) and then warmed; expected⣠behavior is⤠continuity âŁwhen cold and âan open circuit as temperature rises. When replacing the thermostat, verify that the replacementâ matches the original’s electrical⣠rating âandâ physical mounting âŁso the bulb contacts the evaporator â˘surface âin the same orientation-incorrectâ mounting or a thermostat with different trip characteristics can lead toâ recurring âfrost âaccumulation â˘or⢠unintended⣠heater operation.
How the 297216600 âŁFrigidaire Refrigerator Defrost thermostat Operates Within the Defrost⣠Control âcircuit
The 297216600⣠Frigidaire Refrigerator Defrost Thermostat â is a⢠temperature-actuated switch mounted against the evaporator coilâ that âcompletes the⢠defrost heater circuit⤠when âthe⣠coil temperature is âŁat â¤or âbelow theâ thermostat’s closingâ threshold. Functionally it is indeed⢠a bimetal or⣠pellet-type thermostat that senses coil temperature⣠and provides continuity âŁto âthe defrost âŁheater only while â˘ice buildup⤠is present â˘and the coil âisâ cold; when âthe heater raises the coil temperature above the thermostat’s opening point the contact⢠opens to âinterrupt the â˘heater. In the defrost control circuit this⢠thermostat is wired in series with the defrost⣠heater and the⣠defrost âtimer⤠or electronic â¤control⢠board, âsoâ a closed thermostat permits current flow â˘during âa timed defrost event and an open thermostat prevents energizing âthe â¤heater â¤outside ofâ defrost conditions.
- Symptoms⣠of⢠a failed thermostat: evaporator remainsâ iced (stuck open)or⢠heater runs continuously causing excessive meltwaterâ (stuck⣠closed).
- Basic⤠test:⤠verify continuity with anâ ohmmeter when theâ sensor is chilled (place âŁsensor in âice water or âagainst a frozen coil); lack ofâ continuity when cold indicates failure.
| Item | Description |
|---|---|
| Typical closing â¤temperature | Closes near â˘freezing âŁ(around 0°C / 32°F); opens as coil warms during⢠defrost-exact set points⢠vary âbyâ design. |
Compatibility considerations: the âpart is designed forâ specific Frigidaireâ modelâ families and âmountsâ withâ a clip or bracket âto â¤ensure accurate coil contact; replacement âunits should match âconnector âstyle and be rated for the refrigerator’s â˘lineâ voltage to avoidâ installation âissues. For service technicians, practical⤠handling⤠includes âverifying correct placement on the evaporator,â checking the wiring âharness for corrosion or damage,⢠and confirming that â˘the control âboard/timer âis commanding âdefrost-this⤠isolates whetherâ the thermostat, heater, âŁor âcontrol âis the⤠root âcause of defrost failures. Replacing the â˘thermostat is a common â¤repair âwhen continuity behavior does not change with temperature, â˘and restoring proper operationâ typically resolves repeated icing or continuous defrost⢠symptoms.
Commonâ Failure âSymptoms and Diagnostic Tests for the Defrost Thermostat
The⣠297216600⤠Frigidaire Refrigerator Defrost Thermostat is a temperature-sensitive switch thatâ monitors evaporator temperature and interrupts the defrost-heater circuit⣠once âthe⣠evaporator reaches the thermostat’s trip âŁpoint. In normal operation the thermostat âremainsâ closed while the⤠evaporator â˘is below the set temperature, âallowing the defrost heater to ârun during a timed defrost event; once the evaporator warms to the cut-out temperature theâ thermostat opensâ to â¤stop heater âcurrent and prevent âoverheating. This part must match the refrigerator’s OEM âtrip â¤specification⣠and mounting method⣠so âthe sensor bulb sits âin the âcorrect thermal zone â˘ofâ theâ evaporator for reliable operation â¤across compatible â˘Frigidaire models.
Diagnosing âŁa failed defrostâ thermostat uses simple electrical checks âand observation of⤠frost â¤patterns. Disconnect power â˘before handling wiring. Typical tests âŁincludeâ resistance/continuity checks at lowâ and â¤ambientâ temperaturesand verifying heater â¤power during âthe serviceâ defrost cycle; âa thermostat⣠thatâ never closesâ in âice conditions or fails toâ open as the evaporator âwarms will cause âŁeither⣠continuous defrost (short cycles, warm freezer) or⤠a failed defrost (heavy frost â˘buildup and poor cooling). Practical bench tests include placing the sensor bulb in an ice-water slurry to confirm aâ closed contact, then warming the bulb to⤠confirm â¤it opensand using a multimeter âŁto confirm no open circuit condition during âŁexpectedâ closed states.
- Heavy frost on⢠evaporator/poor⢠cooling ⢠– âŁindicates thermostat failed⢠to⣠close or failedâ defrost âcycle.
- Compressorâ runs continuouslyâ with warm freezer ⤠– suggests defrost â˘thermostat stuck closed and heater runs⤠excessively,â or defrost not⢠terminating.
- Continuity in ice test – place bulb⢠in ice water; a healthy thermostat should â¤show continuity⢠(lowâ resistance) when cold.
- Open⤠when warm – warming the bulb âŁshould open âthe circuit;â lack of change⣠indicates a faulty element.
- Line-voltage check during service âŁdefrost -⣠confirm heaterâ receives supply âand⢠thermostat allows/blocks current as expected.
| Item | Description |
|---|---|
| Cold continuity | Thermostat shows continuity (near short) at or below its â˘tripâ temperature, completing the defrost-heater circuit. |
| Warm open | thermostat opens as â˘bulbâ warms â˘to cut-outâ temperature, interrupting heater âŁcurrent â˘to prevent overheating. |
| Symptom mapping | Persistentâ frost⣠suggests âopen-failed âthermostat; continuous heater operation or no temperature⤠recovery suggests stuck-closed condition. |
Replacement Considerations, Model⣠Compatibilityand Step-by-step Installationâ for the Defrost⤠Thermostat
The 297216600â Frigidaire Refrigerator Defrost âThermostat isâ a temperature-actuated switch âused to protect the defrost heater⤠and regulateâ defrost⢠cycles by sensing the evaporator coil temperature. It is typically a normally-closed device at refrigeration temperatures that completes âthe defrost heater⢠circuit while the coil is still coldâ and opens to interrupt heater power âas the coil warms to âŁits cut-out point. The⤠thermostat’s sensingâ element is commonly mounted with a spring clip or clamp to the evaporator âtubing and uses quick-disconnect terminals;â replacement compatibility depends onâ terminal size, âcapillary length or sensor orientationand the thermostat’s ârated cut-in/cut-out temperature range, which is usually⣠specified inâ service literature⤠for a given appliance âfamily.
For replacement, verify failed behavior with⢠a âŁmultimeter (continuity at cold, â˘open when âŁwarmed) â¤and matchâ physical mounting and terminalâ style before ordering. Follow these practical⣠steps forâ safe installation and âŁreliable⤠operation:
- Disconnect mains âpower â˘and, âifâ present, unplug the unit to eliminate electrical hazard.
- Remove the freezer evaporator â¤cover to⤠access the thermostat; photograph or note wire⤠colors and routing.
- Carefully release the clip and remove⤠theâ old thermostatâ without⤠bending or⣠kinking any capillary or⤠sensor âelement.
- Install the newâ thermostatâ in the same⣠orientation, secure the sensor clip to the âcoil, reattach insulated quick-disconnectsandâ restore âŁpanels.
- Restore power and initiate âŁa defrost cycle or warm the sensor to confirm⣠the heater turns â˘off when the â¤thermostat opens.
| Item | Description |
|---|---|
| Part number | 297216600 |
| Function | Normally-closed âdefrost thermostat that interrupts heater power at its cut-out temperature |
| Typical activation | Opens at⢠approximately⤠40-50°F (4-10°C) depending on âdesign and⤠calibration |
| Terminals | Commonlyâ 1/4″ âquick-disconnect spade |
| Mounting | Clip-onâ to⣠evaporator tubing âor coil âwith capillary/sensor â¤positionedâ against the metal |
Q&A
what is the Frigidaire 297216600 defrost â¤thermostat and what does it do?
The â˘297216600 is a⢠temperatureâsensing bimetal (defrost) thermostat used âŁon many⣠Frigidaireâ refrigerators. It monitors the evaporator coil temperature and⣠is wired â˘in âŁseries⢠with theâ defrost heater.During a⣠defrost cycle theâ control sendsâ power to⢠the âheater through thisâ thermostat; when â˘the evaporator warms to the⤠thermostat’s trip temperature the switch opens to cut â˘power â˘and⤠prevent overheating.
What areâ common symptoms that the 297216600 defrost thermostat âhas â˘failed?
Common â¤signs include excessive âfrost or ice â˘buildup on the âevaporator or âŁinside the⣠freezer, reduced coolingâ performance, longâ run times for âŁthe compressorand frequent âdefrost failures.⣠If the thermostat fails stuck open the⣠defrost heater won’t run; â¤if it fails stuck closed it could⢠allow the heater to stay on too long (potentially âcausing melted⣠wiring or other⣠issues).
Where is the 297216600 âdefrost thermostat⢠located in the refrigerator?
It is typically âclippedâ directly to the evaporator â¤coil orâ tubing in âŁthe freezer⣠compartment âbehind the evaporator access panel.⤠you will usually find it under the rear freezer interior panelâ orâ behind âa service cover near the evaporator assembly.Access requires⤠removing âthe⢠freezer liners/panels.
How can I test the 297216600 defrost thermostat?
Always disconnect powerâ first.â Remove the thermostatâ from the â˘coil â(or disconnect its wiring) âandâ useâ a multimeter â˘set âŁto âcontinuity or low Ohms.At freezer/cold temperatures (below â¤the thermostat’s closing âŁtemperature) âit should show continuity (closed). Warm the sensor withâ your hand or warm water and it⣠should openâ (no⤠continuity) once it reaches its trip âŁtemperature. If â¤it does not changeâ state,or â˘shows infinite resistance when cold,the thermostat is bad and should be replaced.
Can I replace â˘theâ 297216600 myself and⣠what⤠are the basic installation⢠steps?
Yes, a⣠competent â¤DIYer can replace it.Steps: unplug the refrigerator, pull âthe unit awayâ and⤠remove âŁfreezer âliners/panels to âaccess the evaporator, note wiring location and remove the âold thermostat, transfer⣠or replace âthe clip/sensor⣠making âsure the sensing bulb sits firmly against the evaporator coil, avoid âŁkinking or sharply bending any âcapillary/tube, reconnect wiring, reassemble panels, restore power and run a diagnostic âdefrost cycle to verify operation.â If you are uncomfortable â¤working with electrical or refrigerant components, hire a technician.
Is the 297216600 defrost thermostat compatible with otherâ Frigidaire âŁor Kenmore models?
the 297216600 is an OEM⢠Frigidaireâ part â¤used âon a range of Frigidaire/related-brand refrigerators,â but⣠compatibility depends on â¤the specific refrigerator âŁmodel and year. Always verify âcompatibility by⢠checking your appliance model number âagainst the⣠parts catalogâ or a trusted parts⣠supplier before ordering.
What temperature does the 297216600 open and close at?
exact trip temperatures vary by âŁthermostat design.In general,⢠defrost thermostats areâ designed to be closed at normal freezer/evaporator⣠temperatures and open onceâ the evaporator warms to the âsafe âŁcutoff âpoint⢠during⢠a defrost cycle. As manufacturers use different setpoints, consult⤠the Frigidaire part specification or service literature for the â˘precise opening/closing temperatures âforâ part 297216600.
Can a faulty 297216600 cause other components to failand âŁhow should I âŁtroubleshoot⣠theâ whole â¤defrost system?
Yes.A failing defrost⢠thermostat canâ cause⢠repetitive⢠stress on âthe defrost â˘heater, defrost control/timeror âelectronic controlâ if it doesn’t open or⣠close âcorrectly.Troubleshootingâ the defrost system should include checking the thermostat â¤(continuity test cold/warm),⤠testing the defrost heater âfor continuity/visible⤠damage, verifying the defrost control or main â˘board signals a âdefrost⣠cycleand inspecting the defrost sensor/timer. Replace any failed component and then run a manual defrost cycle to confirm the system functions properly.
The Way Forward
The â297216600 Frigidaire refrigerator defrost thermostat âplays a central role in maintaining proper appliance performance by⣠monitoring evaporator temperature and⣠initiating defrost cycles⣠as needed. By accurately sensing âtemperature and controlling when⤠theâ defrost âŁheater is energized, this component helps prevent excessive â¤frost buildup, âsupports âŁconsistent cooling, âand â¤contributes to efficientâ operation and food safety.
When the⢠defrost⤠thermostat malfunctions,â the refrigerator⣠canâ experience⢠persistent frost⤠accumulation, reduced cooling capacity,â increased energy use, â¤and added stress on the compressor and other components. âBecause similar symptoms can result from issues with⤠the defrost heater,timer/control âboard,sensors,or wiring,careful diagnosis is⣠important âto identify âthe rootâ cause before replacing parts. Confirming âthe âŁthermostat’s condition and⣠compatibility-using the âcorrect 297216600â specification or an âapproved equivalent-helpsâ avoid unnecessary repairs and ensures âŁreliableâ operation.
Replacing a faulty defrost âthermostat in a timely and correct manner restores proper defrost â¤cycling, âimproves efficiencyand helps prolong the âŁserviceâ life of the refrigerator. âFor most users, following manufacturer guidance or engaging â¤a qualified service⢠technician ensures safe â˘installation, proper testingand optimal performance⣠after replacement. Thoughtfulâ diagnosis and appropriate â¤replacementâ preserve âŁappliance function and reduce the risk of recurring problems.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
