1129313 Whirlpool âRefrigerator âŁIce Maker Kit Round Plugâ is a âcircular electrical connector used to join the ice maker assembly⣠to the refrigerator wiring harness. The component is a⢠passive connector/plug assembly designed to provide a⣠secure, indexed electrical interface for power and control signals⣠between the refrigerator’s mainâ harness and theâ removable ice maker module or kit.
Inside the appliance,the round plug serves as⢠the primary⣠electrical interface for the ice-making subsystem,carrying circuits âthat control the fill âvalve,ice tray motor/heater,sensors,and any diagnostic or status lines. It interacts with both low-voltage control wiring and the line-voltage elements of⣠the ice maker,⤠and its design typically incorporates keyed mating, terminal contacts, âand environmental â˘sealing to resist moisture andâ vibration in the freezer cavity.⢠Location and orientation are standardized soâ the ice maker can be removed or⢠replaced without splicing harness wires,and a degraded or loose plug can interrupt power,signal continuity,or grounding and lead to failed cycles or intermittent operation.
This article will cover the 1129313 round âplug’s electrical and mechanical function, compatibility⢠considerations with Whirlpool and related appliance â¤models, common failure â¤symptoms and diagnostic checks â(visual âŁinspection, continuity âand resistance testing, contact corrosion), step-by-step troubleshooting methodsand practical replacement considerations such as part-numberâ matching, terminal⣠count and âorientation, proper mating and sealingâ techniquesand safety â¤precautions for working â˘with appliance wiring. The âgoal is to provide technicians,engineers,and informed owners with the technicalâ context needed to identify issues and perform reliable repairs â˘or replacements.
Table of Contents
- Function and Role of the Ice Maker Round Plug Assembly in Whirlpool âRefrigerators
- How the 1129313 Whirlpool Refrigerator Ice âŁMaker Kit Round Plug Operates â˘and Interfaces with âŁthe Icemaker Circuit
- Common Failure â˘Symptoms and Electrical/Mechanical Diagnosticâ Indicators for the Round Plug
- Compatibility, Replacement Considerations and Troubleshooting procedures for the 1129313 Roundâ Plug
- Q&A
- Closing Remarks
function and Role of the Ice Maker Round Plug Assembly in Whirlpool refrigerators
The âŁ1129313 Whirlpool Refrigerator âŁIce Maker âKit Round Plug is an electrical interface component⤠that provides the mechanical⣠and electrical connection between the ârefrigerator wiring harness and the replaceable ice maker assembly.Functionally,the round plug routes power and control signals required for the ice-making cycle – typically supply voltage,switched outputs for the harvest heaterâ and motor,the water-fill solenoid circuit,and⣠any low-voltage sensor or dialog lines present on specific ice maker designs. The connector’s keyed geometry and latch feature ensure correct orientation and prevent cross-connection, while the molded housing and strain-relief â˘help maintain contact integrity under vibration and thermal cycling common inside a freezer âcompartment.
- Pin⢠configuration â¤and count (commonly 3-4â pins) – confirms signal âmapping for a given model.
- locking tab and keyed shape – prevents misalignment and accidental disconnection.
- Signs of failureâ – corrosion,high-resistance contacts,melted or distorted housing.
- Service⢠checks -⢠continuity and voltage verificationâ at â˘the plug during defined cycle stages.
| Item | Description |
|---|---|
| Typical pin functions | Line power, switched motor/heater output, fill solenoid control, â¤and âsensor/communication as applicable |
| Common failure symptoms | Ice â˘maker does not cycle, intermittent operation, no fillor visible⣠connector damage |
| Compatibility note | used on select Whirlpool âmodels that accept a round plug interface;â confirm pinout and harness mating⣠before replacement |
For technicians and appliance owners,⢠the practical approach to using the â¤round plug assembly is to verify âphysical compatibility and then test⤠electrical behavior: inspect for mechanical damage orâ corrosion, confirm continuity across pins with the connector disconnectedand measure expected voltages at the plug during a controlled test cycle. In field â˘repairs the 1129313 plug can âbe replaced independently when the mating harness⢠is â¤intact, but if pins are stretched, fused,â or the harness insulation â¤is compromised âthe entire harness or ice maker⤠assembly may need replacement⤠to restore reliable operation. Verifying pin assignments â˘againstâ the ârefrigerator model’s service data prevents miswiring and reduces repeat failures.â
How the 1129313⢠whirlpool Refrigerator Ice Maker Kit Round Plug Operates andâ Interfaces with the Icemaker Circuit
The 1129313 Whirlpool Refrigerator Ice Maker Kit Round Plug is a molded electricalâ connector that⢠provides theâ physical and electrical interface between the refrigerator wiring harness and the ice maker assembly. Functionally, the round plug routes the discrete conductors used by theâ ice maker -⣠typically supply voltage for the motor âand heater/harvest circuit, a control or sensor⤠returnand one orâ more switch⣠or valve control lines – into âmatchingâ terminals on the ice maker board.â The plug’s keyed shape and retention â¤tab ensure correct orientation and secure mating so that each conductor lines up with the âintended terminal; a worn orâ corroded plug can create intermittent contacts that reproduce common symptoms suchâ as⣠failure to âŁfill, failure to advanceor incomplete harvestâ cycles.
The⣠plug interfaces electrically by establishing low-resistance⤠connections to the ice â¤maker’s internal switches, motorand heater elements; âtechnicians can trace and verify each conductor with âa continuity checkâ and live-voltage âmeasurement â˘during an ice-making cycle. âŁPractical compatibility considerations include ensuring the kit’s plug⣠matches the refrigerator harness geometry and terminalâ layout, checking wire color codes against the service manual,â and confirming that replacement harnesses preserve âthe original insulation andâ strain relief. Troubleshooting steps useful in the field include inspecting the plug âŁfor bent âŁpins or⤠contamination, verifying terminal continuity with the plug disconnectedand âapplying a controlled test voltage to individual pins to force the motor or valve for⤠functional verification.
- Verify keyedâ fit and retention tab for correct mechanical mating.
- Inspect pins for corrosion âor deformation that canâ cause high resistance.
- Perform continuity checks and voltage measurements⤠on âŁeach terminal during a cycle.
- Match wire color codes or service schematic before connecting replacementâ harnesses.
| Item | Description |
|---|---|
| Mating connector | Refrigerator harness interface that âmust match plug geometry and terminalâ layout. |
| Signals carried | Motor/drive, heater/harvest, fill-valve â˘control, âand sensor/switch returns (mapped per model). |
| Common diagnostics | Continuity, live-voltage⢠checks during cycleand visual pin inspection to isolate failures. |
Common Failure Symptoms and Electrical/Mechanical Diagnostic Indicators for⤠the Round âPlug
The⣠1129313 Whirlpool Refrigerator Ice Maker Kit Round Plug is the circular multiâcontact connector that provides the electrical interface between â˘the âice maker module â¤and⤠the refrigerator wiring harness.â It carries the power andâ control paths for the ice-maker motor, waterâfill solenoid and the harvest/thermostat/thermistor circuitsand âis keyed to mate only with âthe corresponding harness to maintain correct pin mapping. The plug’s retention geometry and contact design are intended to resist vibration and light moisture, â¤but mechanical â¤stress, terminal deformation or corrosion increase contact resistance and lead to intermittent or failedâ operation thatâ affects the ice maker’s âŁfunctional behavior.
- No ice âproduction or complete âloss of cycling.
- Intermittent âfills or partial harvests (cycles sometimes work, sometimes do not).
- Continuous water flow or water valve that does not shut off.
- clicking,⣠buzzingor⤠motor hum indicating high contactâ resistance or voltage drop.
- Visible discoloration, melting, loose wiresor corroded â¤terminalsâ at the mating faces.
| Item | Description |
|---|---|
| Function | provides power and signal paths between ice maker and appliance harness; ensures correct pin alignment. |
| Common faults | open circuits, high resistance at terminals, corrosion, cracked housingor improper mating. |
| Diagnostic actions | Visual inspection,â continuity checks, backâprobing for commanded voltage, wiggleâ test under loadand replacement of the plug or â¤harness when terminals are damaged. |
Diagnosing plug-related failures requires a methodical approach: visually inspect the mating faces and housing for heat damage or âcorrosion, then verify continuity from the iceâ maker terminals through⤠the harness to the harness connector. With the refrigerator⤠energized and â˘the ice-maker commanded (use the service test â¤or manually advance the âmodule), backâprobe the plug to confirm theâ expected â˘voltages âand observe weather anyâ voltage collapses when the connector is flexed; a voltage drop under load or intermittent readings point to aâ highâresistance terminal. âIn repair scenarios, replace the damaged connector or the complete 1129313 Whirlpool Refrigerator Ice⤠Maker Kit Round Plug assembly âand recheck operation; ensure proper âstrain â˘relief and clean,⢠corrosionâfree contacts to restore reliable â˘operation.
Compatibility, Replacement⤠Considerationsâ and Troubleshooting Procedures for theâ 1129313 Round⤠Plug
The⢠electrical connector in âthe 1129313 whirlpool Refrigerator Ice Maker Kit Round Plug providesâ the low-voltage âand switched-power interface â˘between the ice maker module and theâ refrigerator harness. The round-plug⢠formâ factor locates â¤the pins in a circular housing and relies on a keyed mating face and retentionâ feature⤠to maintain⣠orientation and contact â˘pressure; when replacing this component âmatch the OEM âpin count, pin assignmentand housing⣠geometry so the control signals (thermostat/thermistor, â˘fill⢠valve, motor/heater,â and ground) map correctly. Technicians should compareâ wireâ colors and use the service wiring diagram for the refrigerator model to confirm⢠that the replacement plug â¤duplicates the original pinout and wire gauge; âmismatched pinouts or undersized conductors can cause intermittent operation or overheating in harvest and fill cycles.
Troubleshooting typically focuses⣠on âŁcontact integrity and continuity. Symptoms such as aâ nonâcycling ice maker, failure to harvestor â¤intermittent fill ofen trace to corroded⢠pins, a cracked housingor a loose retention clip. Diagnostic steps: isolate power, inspect⤠the plug for bent pins and âmoisture, â˘perform a continuity check between the harness and the ice âmaker terminalsandâ measure expected â¤control voltages â˘during a commanded cycle using the refrigerator’s service manual as a reference. For replacement, remove â¤power,⢠release the plugâ latchand use â˘properly âsizedâ crimp terminals or an OEM replacement connector rather than attempting improvisational repairs; clean⤠contacts with an â˘appropriate electrical⢠contact cleaner if⣠corrosion is light, but⤠replace the plug ifâ pins show erosion, plastic is damaged,⢠or the locking feature âno longer securesâ the connection.
- Disconnect power before â¤any inspection or measurement.
- Inspect âfor corrosion, bent pins,⤠damaged latchor moisture intrusion.
- Check continuity â˘and⣠wobble-test theâ connection⢠for intermittent faults.
- Replace with a connector that matches pinâ count,pin assignment,and wireâ gauge.
| Item | Description |
|---|---|
| Compatibility | Replaces the round plug used with âthe 1129313 Whirlpool ice makerâ kit; âmust match OEM pinout and âhousing shape |
| Common failure modes | contact corrosion,brokenâ latch,cracked housing,bent⣠or pushedâout pins |
| diagnostic checks | Visual inspection,continuity between harness and module,voltage checks during cycle per service manual |
Q&A
What is Whirlpool part â1129313 and what does⤠the âround plugâ⤠mean?
Part 1129313 is a âreplacement ice maker kit sold for Whirlpool-family refrigerators. the⢠âround â˘plugâ describes the style of the electrical connector âŁon the ice maker harness â¤- a circular, multi-pin⣠plug that âmates with the refrigerator’s factory wiring harness. Before ordering,confirm the refrigerator model and parts â¤diagram to âmake â¤sure the connector style and mounting pattern match your appliance.
How do I verify compatibility with my refrigerator model?
Check the refrigerator’s model number (usually on a tag inside the fresh food compartment orâ on the cabinet wall).⤠Use that model number âon Whirlpool’s parts lookup or with an â¤authorized parts dealer to confirm 1129313 is the correct âice maker⢠kit. Also compare the plug shape (round), screw/mount locationsand harness pin âcount to the existing ice maker to avoid mismatches.
What is included in the 1129313â ice⣠maker kit?
Typical OEM ice maker kits include the âice maker assembly, the harness with the round plugand mounting hardware and⤠instructions. Exact contentsâ canâ vary, so inspect the package on arrival and compare âwith âthe seller’s description or the packing⢠slip. If any hardware or instructions are missing, contact the seller or Whirlpool parts department.
What tools â˘and safety stepsâ do Iâ need⤠to installâ this ice â¤maker?
Tools: Phillips screwdriver, nut driver or socket set (commonly 1/4″ or 5/16″), pliers, a towel or âsmall bucketand a multimeter if you’ll⢠test electrical connections. Safety: âturn off⢠power to the refrigerator (unplug or switch off the breaker) âand shut off the water supply to the ice maker. work onâ a âdry surface, avoid forcing connectors, â¤and follow⤠the⣠kit’s instructions.If you are unsure aboutâ electrical work, hire a qualified technician.
What are the basic installation steps?
1) Turn off power and âwater. 2) remove the old ice maker (disconnect harness by⢠pulling the round plug and remove mounting screws). 3) Install â¤the new ice maker in the same âŁorientation and secure with screws. â4) Connect âthe round plug to â˘the refrigerator wiring harness until it âclicks. â5) Restore water and power, then run a test/diagnostic⤠cycle⤠or activate the ice maker’s test switch to âŁconfirm operation.Check for leaks and proper fill level âon â¤the⣠first cycle.
How do Iâ test or reset the new ice maker after installation?
many Whirlpool ice makers have âa test button⢠or switch⤠on the unit; press and hold it (usually⢠3-5 seconds) to start âa harvest/fill cycle. If there’s no âtest button, put the refrigerator into its service/diagnostic mode âŁ(refer to the service manualâ for your model) to advance the ice maker.⤠You can also check that the ice maker receives power during a harvest cycle with a multimeter at the harness – consult the âŁwiring diagram for expected voltagesand exercise⢠electrical safety when âmeasuring.
My âice⤠maker won’t makeâ ice â˘after replacing with 1129313 – what should I check?
Common causes: water supply isâ off or the inlet valve is defective, fill tube is frozenâ or blocked,⢠the fill level is incorrect, the ice maker is not receiving power (bad connector, âblown fuseor controlâ board issue), â¤or the unit is defective. Steps: verify water supply and âinlet valve operation, defrost the fill tube if needed, confirm the round plug is fully⢠seated, run a test cycleand⤠check for voltage at the harness during the harvest stage. Ifâ the ice maker⤠still âfails, compare â¤symptoms to the manufacturer’s⤠troubleshooting⢠guide or contact a âtechnician.
Can I splice theâ refrigerator harness to fitâ this round plugâ if it doesn’t âmatch?
It⢠is not recommended to permanently splice wires unless âyou âare experienced and use proper connectors and insulation. Splicing can void âwarranties, introduce corrosion or poor connectionsand create âsafetyâ hazards.â Instead, obtain the correct OEM adapter harness or⤠the proper ice maker kit for your refrigerator model. If a temporary splice is absolutely necessary, use sealedâ crimp connectors and protect the splice from moisture,â then have a qualifiedâ technician perform a correct repair as soon as possible.
Closing Remarks
The 1129313 whirlpool Refrigerator Ice â¤Maker Kit Round Plug serves a⤠specific but important function within compatible Whirlpool refrigeration systems, providing the electrical⣠connection and mechanical âinterface required for reliable â¤ice production. As an OEM-designated component, it contributes to consistent ice âŁmaker operation, helps prevent intermittent failures orâ connection-related issuesand supports the overall performance and longevity of the appliance when installed⣠correctly.
Accurate diagnosis is essential before replacing the â¤1129313 kit: identifying whether the ice maker,â its control circuitryor auxiliary components are the source of a⢠problem ensures that replacement is necessary and effective. When replacement is warranted,⤠using the correct partâ number and verifying compatibility reduces theâ risk⣠of repeatâ failures and maintains the intended performance characteristics â˘of theâ refrigerator.
the 1129313 Whirlpool Refrigerator Ice Maker Kit Round Plug plays a targeted role in maintaining ice maker functionalityand responsibleâ troubleshooting followed âŁby appropriate replacement preserves appliance reliability â˘and safety. Engaging qualified â˘service⣠personnel or consulting manufacturer guidance when in doubt helps ensureâ the repair is performed correctlyâ and that the refrigerator continues to operateâ as designed.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
