WB31K5024 GE Range stove Cooktop 6″ Drip Bowl Chrome with 2 Indents is a stamped metal drip bowl (commonly called a drip pan) intended for use with 6âinch electric coilâ surface elements on GE ranges. The component is a formâfitted,chromeâfinished receptacle⢠that sits in â˘the cooktop opening beneath the coil heating element and features two indented areas to accommodate element supports and mounting geometry.
As a component, the dripâ bowl⤠performs a combination of â¤mechanical and environmental âŁfunctions: it catches spills and debris to protect the internal⤠range cavity, provides a seating surface and â¤partial âsupport for the coil heating elementand helps maintain the correct spacing âŁbetween the element and the cooktop. It interfaces directly with the coil element and the burner â˘receptacle assemblyand indirectly with the cooktop surface and⣠underlying chassis. Because âit is exposed to heat, liquids and abrasive cleaning, material selection and form factor effect corrosion⢠resistance, fitment, â˘and the potential for warping or deformation that can alter â˘element alignment or create clearance issues.
In this âarticle readers will find a technical overview of the â˘WB31K5024 drip bowl including its functional role, dimensional and fitment considerationsand typicalâ OEM compatibility.The piece will describe common failure symptoms (corrosion,â warping, poor element seatingand persistent shorting or arcing), âmethods â¤for inspection⤠and basic troubleshooting, safety precautions to âobserve when servicingâ the cooktopand â˘practical replacement considerations such as â˘verifying â˘size, indent â˘configuration, finish and correct installation procedure. The focus is on âŁproviding â˘actionable âtechnical guidance for technicians,â engineersand â˘applianceâ ownersâ performing diagnosis or replacement.
Table ofâ Contents
- Function and Role of the Cooktop drip Bowl in Heat Management, Spill Containment and Component Protection
- How the WB31K5024 GE⤠Range Stove Cooktop 6″⤠Drip Bowl Chrome with 2 Indents Integrates withâ Burner Assemblies, Mounting Clips and Electrical Clearances
- Common Failure Symptoms, Visual Indicators andâ Measurable Signs of Drip Bowl Deformation or Misalignment
- Compatibility,â Replacement Considerations and âStepâbyâStep Installationâ with Diagnostic Fitment and⢠Torque Checks
- Q&A
- Concluding Remarks
Function âand Roleâ of the Cooktop Drip Bowl⢠in Heat Management, spill Containmentâ and Component Protection
The WB31K5024 GE Range Stove cooktop 6″ Drip Bowl Chrome with 2 Indents functions as a localized heat shield and spill âcollector positioned directly beneath a 6-inch surface burner. As a shallow, chrome-platedâ cup â˘it interceptsâ radiant and convective heat that would otherwise be transmittedâ to the cooktop deck and underlying components; the cup geometry and open center âcreateâ a small airâ gap that reduces conductive heat transfer to the range âframeâ while allowing convective cooling. In addition to thermal behavior, the two indents provideâ mechanical registration with âburner â¤heads or locating tabs so the bowl centers reliably beneath the flame, maintainingâ consistentâ burner-to-cup clearanceâ and⤠preserving intended flame âpattern and ventilation pathsâ for âcombustion and âexhaust gases.
the drip bowl also â¤serves as⤠the first line⤠of defense against spills and corrosive residues: liquids and â¤food particulates collectâ in âŁthe cup rather than entering burner orifice â¤areas, reducing fouling of ignition electrodes andâ gas ports and âlowering the risk of shorted electrical components. In â¤practice, a⣠properly seated WB31K5024 âwill captureâ common kitchen eventsâ such as boiling-over milk, simmering starchesor grease spatters and make cleaning localized rather than requiring disassembly of the burner assembly.Technicians should inspect for warping, pittingor loss â¤of plating-conditions that alter fitâ and âheat dissipation and indicate replacement-while installers must verify the 6″ diameter â˘andâ indent placement to ensure compatibility with the⤠specific GE range model.
- Material: âchrome-plated steel – balances rigidity and heat âreflectivity
- Size and fit: nominal 6″ diameter with two indents for burner âalignment
- Primary functions: thermal âŁdeflection, âspill containment, protection of⤠ignition/electrical components
- Service⢠note: replace if â˘deformed, heavily corroded, â˘or⢠if âflame pattern is disrupted
| Item | Description |
|---|---|
| Part | WB31K5024 GE Range Stove Cooktop 6″ âDrip Bowlâ Chrome with 2 Indents |
| Material | Chrome-plated steel (subject âto⤠discolorationâ under high heat) |
| Function | Heat âmanagement, spill capture, protection of burner and ignition components |
| Compatibility | Designed for GE ranges with 6″ surfaceâ burners; confirm model fit âbeforeâ replacement |
How the â˘WB31K5024 GE Range Stove Cooktop 6″⢠Drip Bowl Chrome with 2 Indents Integrates⢠with Burner Assemblies, Mounting Clips and Electrical Clearances
WB31K5024 âGE Range⢠Stove Cooktop 6″ âDrip Bowl Chrome withâ 2 Indents is a⤠stamped chrome-plated steel insert that locates beneath the burner head toâ collect spills and provide a ârepeatable seating surface forâ the burner assembly. The two indents are stamped to clear and engage common factory mounting clip positions so the bowl can sit flush in the cooktop recess without rotating or bulging under thermal âcycling. In⤠practice this means the âbowl must register with the burner head and the clipâ tabs: when you âreplace a bowl, align the indents with the clip tongues and lower the burner assembly untill⢠the cap and vent ports â˘center over the â¤orifice and ignitor; improper alignment will change flame pattern or allow movement⤠during cleaning.
From an electrical and safety perspective the metal bowl is partâ of the grounded âcooktop environment but must not contact the ignition electrode, wiring harnessor any âinsulated fasteners. Verify that mounting clips retain âthe bowlâ with a âsmall gap to prevent⤠metal-to-electrode contact andâ that the igniter tip protrudes through âits cutout without touching the bowl surface. For troubleshooting, checkâ for visible scrapes, melted âinsulationor shifted clips if sparks are weak or intermittent; reseating⣠the⣠bowl so the indents engage the clips and confirming the burner cap sits level often â¤restores â˘correct spark behavior âwithout further disassembly.
- Alignment: indents match clip positions to ensure⣠concentric placement⤠with burner head.
- mounting interface: clips provide mechanical retention and electrical grounding; inspect clip orientationâ before installation.
- Electrical clearance: confirm no metal-to-electrode contact âand that ignition âŁsparks are unobstructed.
| Item | Description |
|---|---|
| Bowl⣠diameter | Nominal 6″ insert, chrome-plated steel, sized for corresponding GE burner heads |
| Indent function | two stamped recesses that locate â˘over⢠mounting clipâ tabs toâ prevent rotation âand â¤ensure seating |
| Service check | Verify clip alignment, bowl seating,⣠and unobstructed ignitor clearance after installation |
Common â˘Failure Symptoms, Visualâ Indicators âand â˘Measurable Signs of Drip Bowl Deformation or misalignment
The ⤠WB31K5024 GE Range stove Cooktop 6″ Drip Bowl Chrome withâ 2 indents functions as both âŁa drip pan to collect spills and as a datum for seating the burner head and cap.⤠When â¤the bowl is deformed âor misaligned theâ burner cap cannot sit concentrically on the gas or electric burner, which changes flame geometry âŁor prevents consistent spark-to-flame distance on igniters. Technically, deformation âalters the â˘reference plane and âlateral position of the burner assembly, producing symptoms such as asymmetric âflame distribution, repeated ignition sparking, unstable burner capsand reduced contact â˘between the â˘burner mountingâ tabs and their receptacles; thes behaviors⢠directly affect⣠combustion stability and heat transfer to cookware. In practical replacement or service decisions, âconfirm that⤠the part matches âŁthe original 6″ size and two-indent configuration because variations in indent⣠count or rim geometry âwill produce repeat âmisalignment even after fitting a new bowl.
- Visibleâ bending,creases,or collapsed indents that prevent flush seating of the burner cap
- Off-center burner cap or cap wobble when pressed into place
- Uneven flame pattern âor âŁone-sided heating of cookware
- Repeated ignition sparking without flame or intermittent⣠flameâ retention
- Audible rattling against the âcooktop or metal-to-metal contact
- Concentration of grease and deposits at displaced edges indicating altered sealing
Quantifiable checks speed diagnosis: lay a 300-500â mm straightedge across the bowl diameter and measure the maximum gap withâ aâ feeler gauge orâ calliper – a continuous warp greater than approximately 0.8-1.0 mm across that span typically warrants replacement âbecause it will shift burner geometry beyond normal⢠tolerances. âŁMeasure concentricity by noting the radial offset between the burner capâ center and burner head mounting boss; offsets above â˘~1-1.5 mm commonly produce âdetectable flame asymmetry or ignition issues. Inspect indents for⢠deformation that prevents tab engagement; bent âor stretched indents â˘change the axial â˘position of the burner head and areâ not corrected byâ simple re-seating. For field technicians,â document the âŁmeasured warp, offsetand any broken indents â¤before ordering⢠a replacement to ensure the WB31K5024 unit specified matches the cooktop’s mounting pattern and âŁrestores proper burner alignment.
| item | Description |
|---|---|
| Maximum acceptable warp | Approximately â¤0.8 mm gap under 300-500 mm straightedge;⢠higher values affect burner seating |
| Concentricity tolerance | Radial offset â¤1-1.5 mm between burner cap center âand mounting boss to maintain symmetric flame |
| Visual cue | Distorted or torn indents, bent rimor âmetal cracks at⢠tab locations indicate replacement |
Compatibility, Replacement Considerations and StepâbyâStep Installation with Diagnostic Fitment and Torque Checks
the⣠WB31K5024 GE Range Stove Cooktop 6″⢠Drip Bowl Chrome with 2 Indents⤠is a stamped, chrome-plated bowl designed to locate and⣠collect âspills around a⢠6″ burner while⣠providing two indent features⣠that register against the burner support or cap for repeatable centering. âFunctionally the bowl is a nonâstructural component: its centering indents and mounting tabs must match the cooktop cutout geometry andâ burner collar dimensions to avoid misalignment⤠of theâ burner cap, whichâ can alter flame pattern and heat transfer. When assessing compatibility, verify three measurements on the⢠replacement part against the âappliance: overall flange outer diameter, the inner opening diameter for the burnerand the position/profile of the two indents or â¤tabs;â small deviationsâ in tab âshape or flange thickness can âstill fit visually but cause⤠lateral play or â¤interference with⤠adjacent elements on different GE model â˘variants.
For replacement and installation, perform aâ diagnostic fitment and torque check sequence to confirm proper seating and secure⤠retention before returning the range to service. Typical⣠practical steps include removing⤠the grate and burner cap, test-fitting the bowl to confirm flush seating âand correct indent engagement, inspecting tab integrity and any surrounding enamel/chrome damageand then⢠reinstalling hardwareâ with â˘controlled â¤torque; verify burner cap seating and flame symmetry after⣠reassembly. Follow the checklist below during the⢠procedure and âconsultâ the appliance⢠service manual for modelâspecific fastener torque⣠values and⢠any adhesive or gasket âdetail required by the cooktop design.
- Disconnect power/gas supply and remove grates and burner caps to expose the bowl area.
- Measure flange and indent positions, test-fit WB31K5024 âin âthe cutout, check for⣠lateral âplayâ or interference.
- inspect mounting tabs and surrounding enamel for deformation; replace bowl ifâ tabs âare bent or cracked.
- Handâseat the bowl, reinstall screws/nuts and âapply torque in a crisscross sequence to specified values.
- Reinstall burner cap and grate, reapply power/gasand verify flame pattern, stabilityandâ that âŁthe âbowl does not contact hot parts.
| Item | Description |
|---|---|
| part | WB31K5024 GE Range Stove Cooktop 6″ Drip⣠Bowl Chrome with â˘2 Indents |
| Key dimensions | 6″ burner opening, verify overall flange OD and indent centerâtoâcenter position against cooktop cutout |
| Material | Chromeâplated⢠stamped steel-corrosion resistant but not structural |
| Typical torque | Small⣠sheetâmetal screws or retainers: ~10-20 in¡lb (consult âservice âmanual for exact model⢠values) |
Q&A
What â˘is the WB31K5024 drip bowl and what⣠size â¤burner does it⤠fit?
The âWB31K5024 is a chrome-plated replacement drip bowl⢠(drip pan) designed for use with 6-inch electric coil (surface) burners. It fits⣠the smaller 6″ cooktop heating elements commonly used on many GE electric ranges.
Is this drip bowl compatible with my GE range?
compatibility depends on â˘whether your range uses 6″ electric â˘coil elements and the same mounting geometry. WB31K5024 is intended for GE ranges that accept 6″ chrome drip bowls with two locating indents. To be certain, compare the part number, âtheâ pan’s shape and hole pattern to your existing pan or check your range model’s parts âŁlist / owner’s manual.
What do the “2 indents” on the drip bowl do and how should the pan be oriented?
The two indents are formed depressions toâ clear and/or locate the coil⢠element terminals and to allowâ the coil to âsit properly in the pan. When installingorient theâ pan so the indents match the shape of the coil element andâ terminal pins – the coil⢠should â¤rest in the âŁpan without contacting the cooktop surface. If unsure, match the newâ pan to the old one’s orientation before reassembly.
How do I replace the WB31K5024 drip bowl safely?
First disconnect power to the range â(unplug or switch off the breaker). For electric coil â˘units, liftâ and⣠gently pull the coil element out of the terminal block, hinge it up,⤠and remove the old pan. Slide the new pan into positionâ under the coil terminals,â lower the coil⣠into⢠the pan⢠aligning the element’s mounting pins withâ theâ pan’s openings, then push the coil⤠back â˘into the terminal block. Reconnect power andâ test. âIf you âare not comfortable working on electrical appliances,hire a qualified â¤technician.
What materialsâ is this drip bowl made of and how should I clean it?
WB31K5024 is typically chrome-plated steel. Clean with warm soapy water,⤠a non-abrasive spongeor a âŁbaking soda paste for stubborn stains. Avoid steel wool or harsh abrasive cleanersâ that can scratch or remove chrome plating. Dishwasher use may causeâ discoloration over time; hand washing is⢠recommended to preserve finish.
Will⤠a damaged or warped drip bowl affect burner performance?
Yes. if the pan is severely warped, dentedor corroded, it can prevent the coilâ from sitting flat⣠or making proper contact âwith the terminal pins, â¤causing poor heating, intermittent operationorâ arcing. Replace any pan that is misshapen, has⣠large holes,â or interferes with the â¤element seating.
Can â˘I use a non-OEM orâ universal drip bowlâ rather âof WB31K5024?
You can use aftermarket âor universal pans if they match the size, hole spacingand indent/shape neededâ for your element. However, OEM parts like WB31K5024 are made⣠to the original specificationsâ and are more likely to fit correctly.Always verify⤠dimensions and fit before purchasing a non-OEM replacement.
How can I identify âŁthe correct replacement part number for my range if⢠I’m unsure it’s WB31K5024?
Locate your range’s model number (usually on⣠a tag underâ the⤠cooktop, behind the oven dooror on the frame). Use that model number on the manufacturer’s parts lookupor consult the owner’s manual/parts diagram to find the exactâ drip bowl part number. Alternatively, remove the existing panâ and compare shape, hole spacing, âand size to⤠the â¤replacement listing to confirm compatibility.
Concluding⢠Remarks
Theâ WB31K5024 GE Range Stove Cooktop 6″ Drip Bowl Chrome with 2 Indents serves a practical and⢠protective role on âcompatible GE cooktops⣠byâ capturing spills and drips around⣠the burner, reducing surface â˘staining and corrosionand preserving the appearance of the cooktop with aâ durable chrome finish. The two âindents are designed to accommodate⢠burner elements and ensure a secure fit, helping toâ maintain efficient heat distribution and a neat installation. As âŁa⤠simple but integral component, the correct⤠drip bowl contributes to both the functionality and longevity of the range.
Accurate diagnosis of wear, â¤deformationor incorrect fit is important⢠before replacementâ to confirm that the WB31K5024 is â˘the appropriate part and that observed performance issues are not caused by other components. When replacement is necesary, using the⣠correct âpart number and following safe installation practices-or consulting a qualified service technician-helps â¤ensure reliable operation â˘and âappliance safety.Proper maintenance and timely replacement of damagedâ dripâ bowls can reduce the risk of⢠further⤠cooktop damage and support the ongoing safe use⤠of âthe âŁrange.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
