316272000 Frigidaire Igniter and Orificeâ Holder is a combined ignition and fuel-metering component⣠usedâ in gas cooking appliances. The⤠assembly â¤typically consists⢠of a mounting flange and threaded orifice holder that secures âŁthe gas jet, together â¤with an ignition elementâ (either an âŁelectrode for spark âŁignition or a⤠hot surface element dependingâ on model) and ceramic âinsulation. Asâ a discrete âreplacement part, âŁit provides theâ mechanical interface between⣠the appliance’s⣠gasâ manifold and the⤠burner whileâ positioning the igniter element at⢠the correct⤠distance from the gas outlet.
inside the appliance the igniter and orificeâ holder directly interfaces⤠with the⢠gas valve/manifold, burner âheadand the ignitionâ control system.⤠Its âprimary role is to present the correct orifice or jet for theâ specified âfuel flow âand to maintainâ the igniter element’s alignment⣠so reliable ignition and âflame stability âŁare achieved. Because⣠itâ affects⤠gas flow geometry, ignition timingand the flame envelope, the component is integral â¤to proper combustion, flame sensing or rectification â˘circuits, â˘and overall⣠burner performance. It is indeed most â˘commonly⢠used in gas ranges, â¤cooktops andâ ovens where controlled, repeatable ignition of⣠the main burners is required.
In this article readers will âfindâ a technical explanation of⢠the 316272000 assembly’s function and internal âfeatures,⤠guidance on compatibility and identifying âequivalent part numbers, typical â˘failure symptoms to watch for (such âas failure to âlight, delayed ignitionor abnormal⢠flame shape), â¤diagnostic approaches and common⣠troubleshooting checksand âconsiderations for safe replacement and final verification. The content is written forâ technicians, engineersand âinformed appliance owners who need practical, component-level understanding to diagnose or replace â¤this part within the â˘appliance system.
Table⤠of contents
- Function and Role of âthe Igniterâ and Orifice Holder in âŁFrigidaire Gas Burners
- How⤠the 316272000 Frigidaire Igniter and Orifice Holder Works inside theâ Appliance’s Gas âDelivery and⢠Ignition System
- Common Failure⢠Symptoms and Diagnostic Indicators âof Igniter and⣠Orifice Holder Malfunction
- Replacement Considerations â˘and â˘Step-by-Step Installation⣠Procedures for the â316272000 Frigidaire Igniter â˘and â˘Orifice Holder
- Q&A
- To Wrap âIt Up
Function and Role of the âigniter â˘and Orifice Holder inâ Frigidaire⣠Gas Burners
The 316272000 Frigidaire Igniter and orifice holder is a combined âservice â¤component⣠that both⣠positions the â¤gasâ orifice and carries the ignitionâ electrode.â the igniter elementâ provides aâ high-voltage⢠spark delivered across a small âelectrode â˘gap to⢠ignite the fuel/air⢠mixtureâ emerging fromâ the orifice, while the â¤orifice â˘holder secures the preciselyâ sized brass orifice in theâ burnerâ head âandâ maintains the correct alignment with the air shutter âand mixing ports. Proper mechanical seating and insulation (typically a âceramic insulator around the electrode and a metal mounting flange)⤠are necessary to preserve spark integrity and a gas-tight path; any looseness, cracked ceramicor misaligned⣠orifice will change⢠flameâ shape and combustion âbehavior⣠and can causeâ intermittent⣠ignitionâ orâ slowâ light-offâ on compatible Frigidaire gas â¤cooktops and ranges.
Operational behavior of this assembly is diagnostic: âthe ignition module supplies the high-voltage pulse and the electrodeâ must â˘be correctly positioned relative to the orifice and grounded chassis to produce âa reliable spark. Common practical checks include visual âinspection for carbon tracking â¤on⣠the âelectrode,â confirming⣠a â¤consistent electrode-to-capillary gap (~2-3 mm typical), verifying â¤continuity â˘to the igniterâ elementand confirming the orifice isâ freeâ of debris and fully seated. suchâ as, âa steady clicking soundâ with no⢠flame oftenâ indicates a cracked⣠insulator âor poor grounding, while âa delayed yellow⢠flame suggests âŁa partially blocked⣠or incorrectly sized orifice. Alwaysâ isolate gas and âŁelectrical supply before âservicing and replace the assembly with the OEM âŁ316272000 Frigidaire⤠Igniter and Orifice Holder or an approved equivalent to maintain fit, â˘flow characteristics, âŁand safe ignition performance.
- Continuous clicking without ignition⤠– cracked insulator or poor ground
- Yellow âŁor lifting flame – partial orifice blockage or wrong orifice sizing
- Intermittent ignition – loose mounting, âŁelectrode gap variance,⢠or carbon buildup
| Item | Description |
|---|---|
| Function | Spark generation and orifice positioning for controlled â˘ignition |
| Materials | Ceramic insulator, steel/brass mounting⤠hardware, brass orifice |
| Indicators | Clicking, âweakâ or â˘yellow⣠flame, delayed light-off, â˘visible âcarbon tracking |
How the⢠316272000 Frigidaire Igniterâ and â˘Orifice Holder Works Inside the Appliance’sâ Gas Delivery and Ignition System
The 316272000 Frigidaire Igniterâ and Orifice âŁHolder serves⢠as the mechanical and â˘functional interfaceâ between the gas manifold âand theâ ignition electrode in compatible Frigidaire gas appliances. âIt secures a calibrated orificeâ that meters gasâ flow⣠into the burner⣠port whileâ positioning the â˘igniter electrode so a â¤sparkâ will reliably âignite âthe â˘gas plume. During a normal ignition cycle the⣠gas valveâ opens, gas âis âforced through the holder’s orifice,⤠and the electrodeâ produces⣠a spark at the correct location and âgap; correct alignment and an unobstructed orifice are criticalâ for consistent⤠flame establishment and stable combustion.
- Common symptoms âof âa failing âholder: â¤delayed ignition,â repeatedâ clicking with no flame, â˘uneven⢠flame âheightor noticeable gas âodor⤠beforeâ ignition.
Technicians should check â¤compatibility⤠withâ the appliance’s fuel type because orifice diameter varies between natural âgas and LP, âand⢠the⢠holder must match the appliance’s manifold geometry⤠and â˘mounting screws. âPractical diagnostics include âvisual inspection forâ cracked âceramic insulators,â a clogged orifice, bentâ or misaligned electrodeand verifying secureâ electrical and gas⤠connections; after replacement, perform â˘a leak check and verify ignition timing âand flame stability. When servicing,refer to the appliance’sâ specificationâ sheet for required orifice sizes âand electrode â˘gap tolerances rather âthan âassuming generic values.
| Item | Description |
|---|---|
| Orifice | Calibrated opening that meters fuel âflow; size selected for fuel type (Natural vs LP). |
| Igniter positioning | Mounting and ceramic insulator maintain electrode gap and⣠location relative to the burner port. |
| Typical âfailure indicators | Clogged orifice, cracked insulator,â misaligned electrode, â˘or loose mounting causing ignition âfaults. |
common Failure Symptoms and⣠Diagnostic Indicators of Igniter and Orificeâ Holder malfunction
The 316272000 Frigidaire â¤Igniter and Orifice â¤Holder is âa combined component that locates⢠the âgas orifice relative to the hot-surface igniter â¤and secures⣠the⤠assembly âto the burner⣠box. The igniter is the heat/current source that âinitiates â˘combustion by â˘drawing â¤sufficient current to allow⣠the gas safety valve to open;â the orifice holder â˘establishes the⣠jet geometry and provides a stableâ mounting for the electrode andâ orifice. compatibility depends on â˘the oven model’s mounting⣠flangeorifice size âŁand valve âinterface, so technicians should confirmâ mechanical fit and âorifice specification when replacing â¤the âassemblyâ to âavoid mismatched flow characteristics or improper valve alignment.
Failing assemblies produce distinct mechanical and electrical indicators that help⢠narrow diagnosis: delayed ignition, persistent clicking, intermittent âoperation, âyellow or sooty flameor the presence âof an unburned⢠gas odor. Inspect the igniter âŁforâ cracks or glazing⤠and test for continuity; an âopenâ circuit or an⤠igniter thatâ glows but does âŁnot draw⣠sufficientâ current to actuate the gas âvalve indicates element degradation. Check â¤the orifice holder forâ carbon build-up,⣠corrosionor a bent alignment that disturbs the gas jet – a â¤partially clogged orifice reduces flow and produces a weak, unstable flame. Practicalâ diagnostic steps include a visual inspection, continuity/resistance check with⣠a multimeter, verifying valve voltage when the igniter⣠is hotand comparing observed flame âŁbehavior after cleaning orâ replacing the orificeâ to confirm restorationâ of correct⣠combustion.
- Delayedâ ignition – igniter⤠glows an⢠unusually â˘long timeâ before flame;â indicates low current⤠or âdegraded element.
- Weak or yellow flame – âŁsuggests partial orifice blockage or improper air/gas mixture due to⣠misalignment.
- Intermittent âŁoperation⢠or âclicking â˘- can⢠be loose⣠mounting, intermittent electrical contactor âŁaâ partially-failed igniter.
- Visible âsoot or â˘carbon⢠around the orifice – evidence of incompleteâ combustion and⢠likely orifice or alignment â¤issue.
| Item | Description |
|---|---|
| Noâ ignition | Igniter shows open circuit âor âno visible âglow;⤠replace igniter/assembly and confirm valve â¤actuation. |
| Prolonged glow | Igniter glows but flame â¤delays; element may not be reaching ârequired current or orifice flow is⣠restricted. |
| Yellow/sooty â˘flame | orifice âŁcontamination or misalignment âcausing poor air/gas âmix; clean or replace orifice holderâ and âinspect burner ports. |
| Gas odor | valves â¤not sealing or ignition delayed; âisolate gas âsupply and â˘test âvalveâ and igniter sequencing â˘before âreuse. |
Replacement Considerations⢠and Step-by-Stepâ Installation Procedures for âthe 316272000 Frigidaireâ Igniter and Orifice Holder
The 316272000 frigidaire âIgniter⣠and⤠Orifice Holder integrates theâ ignition electrode assembly âwithâ theâ gas orifice mounting so the⤠spark âis consistently âdelivered at the correct positionâ relative to⤠the gas jet. In operation,â the âŁigniter⤠provides âthe high-voltage spark while the âorifice holder secures the metering âŁjet and provides the mechanical interface to the âŁburner âhead; âany misalignment, ceramic crackingor build-up inside âtheâ orifice will change flame shape, ignition timingand combustionâ stability. Confirm âdimensional fit and thread type against âthe appliance’s service documentation âbefore replacing this component; physical compatibility (mounting â˘holes,orifice thread â˘pitch,and⤠electrode reach) is⢠asâ important âas⣠electrical matching when selecting a âreplacement part for âaâ Frigidaire ârange or cooktop.
Replacement requires âcontrolled, ârepeatable steps that preserve gas seals and âelectrode geometry. Start by electrically â¤isolatingâ and⢠then shutting off the gas supply,⤠remove the burner âcap andâ burner âheadand ânote⤠the orientation â˘and depth ofâ the orifice holder so the jet axis and electrode⣠tip return âŁto âthe same â¤relative position. âŁAfter installing the⣠new orifice holder,â hand-tighten the orifice, â¤avoid cross-threading, ârestore the electrode gap to its nominal spacing,â and perform⢠a pressure/leak check with a â¤soapâ solution or calibrated detector before âŁre-energizing the igniter;â observe flame color and pattern across low-to-high âsettings âŁto verify proper combustion. Common practical failure âmodes â˘to check for include a âŁchippedâ ceramic insulator that causes âintermittent spark jumping,⣠a recessed electrode that produces delayedâ ignitionand a partially blocked orifice that yields a âyellow, lifting flame rather than a stable blue â˘cone.
- Essential⣠tools â˘and checks: socket set, small wrench for orifice, multimeter for âcontinuity/spark coil checks, leak-detection solutionand a soft brush to clear debris.
- Key pre-install inspections: âconfirm orifice thread and seat condition, inspect ceramic and â¤electrode tip for âŁerosion, verify wiring⤠harness⤠connector fit.
- Post-install verification: âleak test at low pressure, âcontinuity/spark test, â˘and visual flame observation across burner settings.
| Item | Description |
|---|---|
| Electrode â¤gap | Typically set to 2-3 âmm (0.08-0.12 in);⤠adjust to match â¤original geometry⢠for consistent spark⣠transfer. |
| Mounting orientation | Maintain factory-facing⣠alignment so the electrode is adjacent to âŁthe orifice âjet; misalignmentâ causes ignition delays. |
| Orifice seating | Hand-tighten⢠and âthen⢠snug; avoid â¤over-torquing which can deform seating and cause⣠leaks. |
| Leak⤠check | Use soap solution or calibrated leak âdetectorâ on connections at low pressure before applying full gas and electrical âpower. |
Q&A
What is the 316272000 Frigidaire igniter and orifice holder assembly and â¤what does it do?
The 316272000⣠assembly is an OEM replacement part used⣠on⤠some Frigidaire/Frigidaire âGallery gas rangesâ and ovens.It combines the⤠oven/burner igniter (theâ hot surfaceâ element that lights the gas) with the orificeâ holder (theâ mechanical piece that positions the gas orifice/nozzle in the burner manifold). Together they â¤ensure âproper gas â¤flow and reliable ignition of the oven⤠burner.
What are â¤the common⤠symptoms that this assembly needs âto be replaced?
Typical âsymptoms include â¤the oven burner not lighting âor taking a âlong time to âŁlight, the igniter not glowing, continuous clicking without ignitionor âaâ gas smell combined â˘with failed ignition attempts. If the igniter shows open circuit when tested with a multimeter,⣠or if the orifice holder⤠is visibly damaged, crackedor corroded, âreplacement is⤠indicated.
How do I test the igniter portion to confirm it is âbad?
First âturn off⣠power and gas. Remove theâ igniter⢠and check for continuityâ with⤠a multimeter – a working igniter will showâ continuity; an open circuit usually means failure. âŁMany technicians also observe âthe âigniter âŁduring âa heat âcycle: aâ working hot surface igniterâ will â¤glow orange â˘and drawâ meaningfulâ current to⢠allow the gas âvalve to open. For safe and precise âtesting, measure resistance and compare to theâ oven’s service⣠manual specification; if not listed, continuityâ plus⣠visible âglow under power âare common practical checks.
Can⤠Iâ replace just the â¤igniter or do I⤠need âto replace the âwhole â316272000 assembly?
That depends on⣠your model âand âwhat’s available. The 316272000 is sold as â¤an igniter-and-orifice holder â¤assemblyand on manyâ models âreplacing the whole âassemblyâ is âŁrecommended as the parts are installed together and âthe orifice holder can âbe âŁdamaged or corroded. If you can source âŁaâ compatible â¤standalone âigniter for yourâ model andâ the orifice holder is in âgood⣠condition,a standalone replacement may be possible-but confirm fit and compatibilityâ with your model number first.
is this âa âsafe DIY replacement and what precautionsâ should I⤠take?
Some experienced DIYers can replace⤠this assembly, but you must follow strict safety steps: disconnect electrical powerâ to the appliance,⣠shut âŁoffâ the gas supplyand work in a⢠well-ventilated area.After installation,check for gas âleaks with a âsoapâ solution⤠or approved leak detector (never⤠use â˘an open âflame),and restore power to test ignition. If you âare not agreeable âwith gas work or electrical⢠testing, hire a qualified appliance âtechnician.
What tools and materials do I need to replace the 316272000 assembly?
Commonâ tools include a nut driver or â˘socket set, screwdrivers, pliersand a multimeter for â˘testing. You âŁmay also need a small wrench forâ the â¤orifice fitting.â Do not use non-approved thread sealants on⣠the orifice; follow⣠the manufacturer’s instructions-many service manuals advise against Teflon tape or heavy sealants âŁon small âorifice â˘threads. Have a âleak test â¤solution available for post-installation checks.
How do â˘I make sure âI buy the correct replacement part for my oven?
Confirm the appliance model â˘and serial number (usually on a tag inside the oven door frame or âŁoven cavity).⢠Cross-reference the model numberâ withâ Frigidaire’s parts list or anâ authorized parts â¤dealer; the 316272000 part ânumberâ isâ specific âŁbut mayâ have superseded or alternative part⢠numbers for certain models. Buying OEM âor a verified equivalent ensures correctâ fit andâ proper gas â¤jet/orifice sizing for your â¤appliance.
After installing the newâ assembly the⤠oven still won’tâ igniteâ – what should I check next?
If the newâ assembly is installed and properly wired but the oven still won’t light, check that the â¤gas⣠supply is on, verify power to â˘the control boardand âconfirm the control is sending voltage to the igniter duringâ a heat cycle. Inspect wiringâ harnesses andâ connectors forâ damage âor loose â¤connections. If âŁvoltage is present at the igniter and âit⣠still does â˘not glow, âtheâ replacementâ might potentially be faulty. If the igniter â˘glows butâ the gas valve doesn’t open, the gasâ valve or control board may be the issue; at âthat point⢠consider calling âa qualified âtechnician for⣠diagnosis â¤and repair.
To wrap It Up
The 316272000 â˘Frigidaire Igniter â˘and Orifice Holderâ play a⤠central role in gas appliance â¤operationâ by providing reliable ignition and⣠precise âpositioning of the â˘gas⢠orificeâ for consistent â˘burner performance. Togetherâ they ensure a stableâ flame, efficientâ combustion,â and âproper fuel metering-functions⤠that are âessential for safe, efficient,⣠and âpredictableâ appliance behavior.
Because âtheseâ components are exposed to heat, combustion byâproducts and mechanical stress, wear or contamination⢠can leadâ to ignition failures, delayed lighting, unstable flames or reduced efficiency. Accurate diagnosis-combining visual inspection with appropriate electricalâ and gasâflow checks-and âverification of part â˘compatibility are âimportant to⢠determine whetherâ the igniter, the orifice holder,â or related⣠components are the root cause of a problem.
When⣠replacement is indicated, using âthe correct 316272000⢠Frigidaireâ Igniter and Orifice Holder (or the âmanufacturerâspecified equivalent) âŁand ensuring proper installation helpsâ restore performance, maintain safety marginsâ andâ prevent furtherâ damage. For those without the necessary tools or experience, seeking qualified service is â˘recommended to âŁensure correct âdiagnosis, installation and â˘compliance âwithâ manufacturer guidelines.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
