137105100 âFrigidaire Dryer Hinge âDoor is a â˘replacement door hinge assembly used on select Frigidaire â¤frontâload dryers. The⣠part â¤functions⣠as the⤠mechanical pivot adn⤠mounting interface between âthe dryer âcabinet and⣠theâ access â¤door; it âis typically aâ stamped metalâ orâ molded component with mounting bosses and fastener locations designed to secure and permit controlled âŁrotation of the dryer door.
Within⤠the â¤appliance, âthe hinge controls door âalignment, opening/closing motionand the relative position â¤of the door⣠edge⣠to âthe cabinet gasket and latch. Proper hinge function âensures consistent sealing for thermal containment and airflow control,⤠maintains â˘clearance to the rotating drumand permits reliable engagement of the âdoor switch or interlock that prevents operation with theâ door open. The hinge⣠therefore interacts⢠directly withâ the âfront panel, door âassembly, gasket/seal, latch/strikeand the doorâactuated safety and control circuits.
In this âŁarticle readers will find a technical overview of the 137105100 hinge’s function and where it is typically âŁused, guidance on compatibility â˘and⣠model crossâreferences,â common failure symptoms (for example sagging or misaligned doors, noisy or â¤binding operationand⣠failures⣠to engageâ door⣠switches), diagnostic checks âand troubleshooting proceduresand practical replacement considerations.â Coverage includes⤠inspection points, â¤tools and fastener access â¤strategies, âverification steps âafter installationand⤠checks â¤for⤠associated components that should be replaced or⤠adjusted when servicing the âhinge. Safety precautions such as isolating⢠electrical power before serviceâ and following â˘manufacturerâ torque âand fastening specifications are also âemphasized.
Table of â¤Contents
- Function⤠and Role of the Door Hinge in â˘Dryer cabinetâ Alignment, âDoor Sealing, â˘and Load Stress Distribution
- How the 137105100 Frigidaire Dryerâ hinge Door Operates Within the Door Assembly, latch Mechanism,â and Internal Mounting Points
- Common Failure âSymptoms:⣠Wear⣠Patterns, Misalignment, Noise, Door sagand Seal Gaps
- Compatibilityâ and⣠Appliance âModels: Fitment,â Cross-Reference Numbersand Applicable Frigidaire/Gewalt Model Years
- Replacement Considerations and Installation Procedures:⣠Required â¤Tools, âFastener Torque, Alignment⤠Techniquesand Safety Precautions
- Troubleshooting andâ Diagnostics: step-by-Step Tests, Measurementâ Points, Wear Criteriaand Repair vs.Replaceâ Decision Matrix
- Q&A
- To Wrap It Up
Function and Role of the Door Hinge in dryer âŁCabinet âAlignment,⣠Door Sealingandâ Load Stress Distribution
The 137105100 âFrigidaire Dryer Hinge Door serves as the primary⤠mechanical pivot â¤and alignment⤠datum for the⢠dryer door, maintaining âthe correctâ plane âand gapâ between the⢠doorâ andâ the cabinet flange⢠so the door gasket can â¤compress uniformly. Proper installation of this hinge ensures the door closes squarely â¤and the seal engagesâ aroundâ the full perimeter; if the âŁhinge âis bent, has excessive play â¤at the pivot,â or is⣠installed on the⤠wrong side/hand, the â¤gasketâ will fail to compress evenly and allowâ air leakage, increased cycle times, âand lint accumulation âat the opening. This hinge isâ manufactured toâ match âthe OEM mounting⤠patternâ for â¤the Frigidaire models âŁthat specify 137105100⤠as⤠theâ replacement part, so compatibility â¤depends on âŁthe model’s listed part number and the orientation ofâ the hinge bracket during service.
Mechanically, the⤠hingeâ transfers both⣠static loads (door⣠weight) and â¤dynamic loads (opening/closing, closure impact)⤠into the cabinetâ at âŁthe fastener points; â˘therefore itâ is designedâ to distribute stress âacrossâ the mounting â˘pads âto avoid localized fatigue and deformation of the door or cabinet lip. Typical failure modes are pivot pin wear, elongation of mounting holes, âand looseningâ of âfasteners, all ofâ which â˘introduce door sag and uneven sealing;â service actions⢠include checking for axial or radial play at the pivot, verifying fastener torque to manufacturer valuesand⢠replacing the hinge⢠when âwear âexceeds service tolerances. Practical diagnostics and maintenance cues include the symptoms and checks listed below.
- Symptoms: uneven gasket compression,â visible gap at top or bottom⤠corner,â door sag,â rubbing â¤noise when opening/closing.
- service checks: pivot play measurement, fastener torque⤠verification, visual inspectionâ for âŁbent flange⤠or corrosion.
- Remediation: tighten/replace fasteners, swap or re-index hinge to correct orientation, replace hinge when âŁwear is present rather than attempting â¤minor straightening.
| item | Description |
|---|---|
| Material | Stamped steel hinge with corrosion-resistant finish typical of OEM replacement parts |
| Function | Providesâ pivot axis⤠and distributes door loads to â˘cabinetâ mountingâ points âto preserve seal geometry |
| Service tip | Inspect â˘for pivot play and⣠elongated holes;⣠use âmanufacturer torque specs⣠and replace hinge if play⢠cannot beâ removed by â¤tightening |
Howâ the â137105100 Frigidaire Dryer Hinge⢠Door Operates Within the Door⤠Assembly,Latch Mechanism,and Internal mounting Points
137105100 Frigidaire Dryerâ Hinge Door functions as âthe âmechanical pivot andâ supportâ for the âŁdryer âdoor,indexing the door to the⤠cabinet⢠andâ maintaining correct alignment with the⢠latch and door switch.â Theâ hinge âmounts to internal bosses on the dryer cabinet and typically uses a pivot pinâ or molded bushing to allow⤠controlled rotation; correct seating of the hinge at these internal mounting⣠points ensures the door closes squarely âsoâ the latch striker engages the catch without excessive⢠preload. â˘Functionally, the hinge transfers both static⤠weight⣠and â¤dynamicâ forces from normal door movement⣠into⤠the⤠dryer chassis, soâ wear at the hinge or loose⣠mounting screws⢠commonly manifests asâ misalignment, âŁbindingor intermittent door-switch activation⤠that prevents cycle⣠start.
Within the door assembly the hinge works⣠in concert with the latch mechanism⢠by âholding the door â¤in the planeâ required for reliable âstriker-to-catch engagement; any â˘axial play or âverticalâ offset at the hinge will change the contact geometry at⣠the latch âleading to partial engagement⢠or â˘increased wear on the catch. Technicians replacing this hinge shouldâ inspect internal mounting bosses, verify fastener condition and torqueand confirm that the door swing â¤has minimal lateral âplay while âstill closing without â˘forcing âŁtheâ latch.⤠Practicalâ checks after installation include ensuring⢠theâ door switch actuates consistently, observing⤠the â˘latchâ engagement under slow manual â¤closesand confirming thatâ shims or replacement â¤spacers ârestore original alignment⤠when necessary.
- Primary checks: hinge seating, â¤fastener torque, pivot playand door-switch activation
- Common symptoms of â˘hinge failure: door sag, binding,â intermittentâ startâ due to⢠switch not actuating
- Installation âtip: support âthe door while removing/attaching âhinge âtoâ avoid stress⢠on the latch and wiring
| Item | Description |
|---|---|
| Pivot | Metal pinâ or molded⤠bushingâ allowing controlled rotation and limited axial play |
| Mounting âinterface | Cabinetâ bosses with â¤screws-check for stripped threads or⣠cracked bosses |
| Functional interaction | Maintains door plane for âŁreliable latch engagement â˘and consistent door-switch actuation |
Common Failure Symptoms:â Wear patterns, Misalignment, Noise, Door Sagand Seal Gaps
Theâ 137105100 Frigidaire Dryer â˘Hinge Doorâ functions as⤠the door pivot and alignment datum, transferring door loads to the cabinet while maintaining the sealing plane around the âdoor perimeter. Typical assemblies consist of a hinge pin,a bearing surface or⣠polymer⣠bushing,and a stamped or⢠cast âmounting flange that registers against factory bosses; â˘matching pin â˘diameter,flange⣠thickness,and mounting-hole spacing is âŁnecessary forâ correct fit âand repeatable doorâ swing.When replacing âŁthis hinge, technicians âŁshould check pin clearance, bushing condition, âand fastener torque âŁto ensure the hingeâ does not introduce lateralâ play or change the door’s closed position relative to the latch and âseal.
Common failure symptoms â˘are⣠diagnostic: progressive⤠wear onâ the pin or⢠bushing showsâ up as scoring âor ovalized holes, misalignment produces⢠visible gapsâ or one-sided seal compression, â˘and mechanical noise ranges from a⢠continuous squeak (dry or âfailing polymer bushings) to intermittent clunks (loose⢠or fractured âhinge components).Practical âŁinspection steps include â¤measuring gap uniformity around the seal, checking⢠for⢠elongated⣠mounting holesand applying a thin lubricant âto isolate lubrication issuesâ from dimensional wear; addressing⤠the root cause (replacing a worn pin or correcting a bent flange) restores sealing and prevents heat loss or âpremature door-strike wear.
- Wear⣠patterns – scoring â˘or ovalization on the â¤pin/bushing indicating metal-to-metal contact.
- Misalignment – âuneven gaps âor⣠one-sided seal compression â¤caused by bent⤠or shifted hinge geometry.
- Noise⣠– squeaks âŁfrom degraded bushings or lack of âlubrication;â clunksâ fromâ loose pivots.
- door sag – âlower door âedge⤠droops due âto axial play or worn fasteners.
- Seal gaps – â˘incomplete contact at⢠the seal leading to heat/air âleakage âandâ longer cycle times.
| Item | Description |
|---|---|
| Wear⣠patterns | Scoring on pinâ orâ bushing, âovalized holes; inspect⣠for metal transfer and measure boreâ diameter against⤠spec. |
| Misalignment | Elongated mounting holes or âbent flange; âverify flange flatness and mounting boss engagement before replacing hinge. |
| Noise | Squeak â¤= lubrication or polymer bushing⢠failure; âclunk = loose pin or⢠fractured âhingeâ component; isolate byâ hand-cyclingâ door. |
| Door sag | Axial⣠or radial play in pivot; âcheck⤠fastener torqueâ and pin end-play,⢠replace hinge if tolerances exceed âservice limits. |
| Seal gaps | Asymmetric seal â¤compression from â¤mislocated hinge â˘or warped door; measure gap around perimeter and correct hinge⤠geometry. |
Compatibility and Appliance Models: âŁFitment, Cross-Referenceâ Numbersand⤠Applicable âFrigidaire/Gewalt Model âYears
The 137105100 Frigidaireâ Dryerâ Hinge Door is a load-bearing â˘pivot component that âcontrols door âŁarticulation and âalignment on a range of Frigidaire âand Gewalt dryer assemblies. Functionally the hinge locates â˘the door relative to â¤the âcabinet, maintains the sealing plane for âthe lint âtrap and drum â˘access, â¤and transmitsâ opening/closing forces into â¤theâ door frame.Typical failure modes areâ plastic fatigue at the âŁpivot, âstripped mounting bossesor⢠dimensional wear â¤that allows âexcessive play; any of â¤theseâ symptoms change door sealing and can increase vibrationâ or allow air leakage âduring operation. As the hinge geometryâ (pivot pin position, flange thicknessand screw-hole pattern) directly affects fitment, the 137105100 âpart must beâ matched to the appliance’s hinge pocket and door design rather âthan assumed⤠to be global.
Compatibilityâ is determined by â¤physical fit⣠and by cross-referenceâ numbers supplied byâ OEMâ and aftermarket catalogs. Techniciansâ should âcompare the replacement hinge against âthe appliance model/serial tag, verify mountingâ hole âspacing, hinge thicknessand whether âthe hinge is left-â or right-handed. âA practical workflow: âconfirm the appliance model ânumber,â visually compare âthe hinge orientation and screw âpatternand⤠if âŁavailable check published cross-reference listingsâ for Frigidaire and⤠Gewalt equivalents.Below are âcommon checks to confirm fitment and reduce trial-and-error replacements.
- Confirm â¤appliance model/serial âŁtag and âŁrecord⣠full model number.
- Compare mounting hole âlocations and pivot pin spacing âbetween old⢠and new hinge.
- Verify hinge hand (left âvs. right) and whetherâ the⢠hinge includes integratedâ latch or springâ features.
- Test dry-fit⣠onâ the door âbefore final âinstallation to ensure⤠sealingâ and alignment under load.
| Item | Description |
|---|---|
| 137105100⢠Frigidaire Dryer Hinge⣠Door | OEM replacement hinge used onâ selectâ Frigidaire â¤and Gewaltâ dryer doors; matches when⤠pivot geometry â˘and⣠mounting⣠pattern align â¤withâ the cabinet⣠hinge âpocket. |
| Fitment checklist | Compare model/serial number, mounting hole spacing, âhinge handand visual â¤match of⤠pivot âand flange dimensions prior to installation. |
Replacementâ Considerations and Installation Procedures: Required Tools, Fastener⢠Torque, Alignment⢠techniquesand safety Precautions
The 137105100 Frigidaire Dryer Hingeâ door is âthe primary â˘mechanical pivot that locates âthe dryer door relative to âthe cabinet;â correct installation ensures⢠proper latch engagement, consistent doorâ sealing,⤠and correct drum clearance. âThis hinge transfers both vertical and âlateral⤠loads into âthe â¤cabinet mounting points, âso compatibility â˘with the factory mounting pattern and screw⣠types is critical – mismatched hole spacing or fastener size will â˘produce unevenâ gaps,â premature wear of the hinge âpin/bushingor door sag. Techniciansâ willâ frequently enough observe symptoms âsuch as âŁa one-sided gap, rubbing on the drum lip,⢠or âŁa loose-feelingâ door when the hinge âor â˘its fasteners have loosened or when the hinge geometry â¤is incorrect âfor the â¤model inâ use.
Installation requires basic hand tools and controlled torqueâ request: a torque âscrewdriver or small torque wrench âfor â˘sheet-metal screws,â appropriate âdriversâ (Phillips, Torx), sockets⤠for any hinge bolts, âshims⤠or⣠thin⣠washers for fine alignmentandâ a support for the door⣠weight during work. Recommended practice isâ to âŁstart all âfasteners by hand, âtighten progressively â¤in⣠sequenceand set final torque â¤within⤠typical⤠ranges (such⤠as, ⤠20-35â in¡lb⢠(2.3-4.0 N¡m) â for sheet-metal screws and 40-60 in¡lb (4.5-6.8 N¡m) ⣠for larger âhinge bolts) while verifying smooth âŁswing and a uniform gap (generally a few millimeters) around the perimeter; always confirm the model-specific âŁtorque in âthe serviceâ manual when available. Safety âŁprecautions include disconnecting electrical power, supporting the door to prevent âpinch⢠or crush injuries, wearing eye and hand protectionand⣠avoiding thread â¤over-torque or use of excessive threadlocker that⢠could⤠complicate future âservice.
- Required tools: Phillips/Torxâ drivers, small âŁtorqueâ wrench or torque screwdriver, 5/16″ socket âset, shimsâ or washers, door support or block.
- Torque guidance: tighten in stages and use typical torque⣠ranges âas a starting point; verify withâ the appliance âservice manual.
- Alignment checks:⣠uniform gap, smooth⣠latch âŁengagement, no drum interference throughout full swing.
- Safety: disconnect power, â¤support theâ door, âwear PPE, â˘avoidâ over-torquing to prevent thread stripping.
| Item | Description |
|---|---|
| Typical fastener torque | Sheet-metal â˘screws: â20-35 â¤in¡lb (2.3-4.0 N¡m); hinge bolts: âŁ40-60 in¡lb (4.5-6.8 N¡m) – confirm model manual |
| Screw type | Commonly #8-#10 â¤sheet-metal âŁor M4-M5 machine screws depending on⣠cabinet design |
| Alignment⢠tolerance | Perimeter⣠gap within âŁa âfew millimeters andâ smooth, snag-free door swing |
| Safety note | Disconnect power, support the doorand use PPE to prevent injury during âŁremoval/installation |
Troubleshooting and Diagnostics: step-by-Step Tests, Measurement âPoints, Wear Criteriaand⣠Repair vs. Replace â˘Decision⤠Matrix
theâ 137105100 Frigidaire Dryer Hinge Door âserves as⣠the mechanical â˘pivot and mounting point that maintains door alignment, seal integrityand consistent actuation of the door interlockâ switch. Technically, â˘the hinge transfers loading â˘forces from the door to the cabinet viaâ stamped⤠mounting ears and a pivot pin; wear at⣠the pivot or âelongationâ of mountingâ holes produces doorâ sag, uneven gap, rubbing⢠noiseandâ intermittent switch â˘activation. Compatibility is determined by the hinge⣠hole pattern and âear spacing-this part matches âspecific Frigidaireâ model families whereâ the hingeâ faceâ andâ screw pattern align with the factory cabinet.â Inspecting function⢠involves confirming smooth⤠pivot motion, no lateral play at the pin, intact mounting earsand reliableâ electrical continuity of the door switch when the doorâ is closed and latched.
Diagnosticsâ require a combination of visual âinspection, mechanicalâ measurementand basic electrical checks to distinguish serviceable⣠wear from catastrophic failure. Use⣠a dial â¤indicator or calipersâ to â¤measure pivot free-playâ at⤠the door edge, a torque driver to verify closing âŁtorqueand a âŁmultimeter to âverify switch continuity⣠under⤠static load; typical service thresholds⤠used in â˘field diagnostics âare: pivot free-play less than 2 mm âand no â¤cracked mounting ears â repair/adjust; pivot free-play greater⢠than 2 mm, elongated⤠screw⢠holesor fractured ears ââ replace âthe âhinge assembly; any deformationâ that âprevents correct switch actuation or consistent sealing warrants replacementâ of the hinge or door âassembly.⢠The goal of the decision matrix is toâ preserve alignment⤠and switch reliability-tighten or replace fasteners and âadd shims forâ minor misalignment,â replace the hingeâ assembly for âworn pivots or damaged ears, âand replace the door⤠assembly only when repairs cannot restore proper âŁmounting âŁgeometry âor switch engagement.
- Visual: inspect pivot pin, bearing area, mountingâ ears, âŁand screw â¤torque; look for corrosion, cracking, âŁor elongated⣠holes.
- Mechanical: âmeasure lateral play at door â˘edge âwith âcalipers or dial âindicator; check closing torque and hinge clearance at multiple points on the door.
- electrical: with door closed, verify door switch continuity and⢠repeat check while applying small⣠lateral load to detect intermittent actuation.
- Decision: if play < 2 mm and âŁswitch⤠reliable âŁâ adjust/retighten; if play ⼠2 mm, cracked earor intermittent âŁswitch â âreplace âhingeâ assemblyâ (137105100 where compatible).
| Item | Description |
|---|---|
| Pivotâ free-play | Measure âlateral â˘movement at the door edge;⣠<2 mm is typically serviceable, âĽ2 mm indicates replacement. |
| Mounting ears | Checkâ for âcracks, âŁelongation of screw holesor distortion; any structural damage requires hinge âŁreplacement. |
| Door switch actuation | Confirm consistent continuity when closed âand under slight lateral load; intermittent actuation points to misalignment or damaged â˘hinge. |
| Tools | Calipers/dial indicator,torque driver,multimeter,and⢠inspection light for âaccurate diagnostics. |
Q&A
What is Frigidaire part 137105100 and whatâ does it do?
Frigidaire⣠part 137105100 is âa replacement door hinge for âselect âFrigidaire dryers. It attaches the dryer door â˘to the cabinet and controls â¤the pivot point so the door opens and closes smoothly and stays âaligned against the seal.
How do I know if theâ hinge â(137105100) is the âproblem and⤠not âthe⤠door or cabinet?
Common signs of a bad hinge are a⤠sagging or misaligned door,binding when opening/closing,visibleâ wear or cracked plastic â¤on âthe hinge,or the door âŁnot staying⤠closed. Inspect âthe hingeâ for cracks, worn pivotâ points,⤠or stripped screw holes. If the âŁdoor itself is warpedâ or the cabinet mounting areaâ is damaged, replacing the⤠hinge aloneâ may ânot fix âthe issue.
Which Frigidaire âdryer models âuse part⢠137105100 â¤and howâ do Iâ confirm compatibility?
Thisâ hinge â¤is an â¤OEMâ Frigidaire replacement used on a range of models. To confirm âcompatibility, checkâ your dryer’s â¤model number (usually âon a tag inside⢠the âŁdoor âopening⤠or âŁon⢠the âback)â and compare it to⤠the parts listing from Frigidaire or a â˘reputable⢠parts âsupplier. Do â˘not rely â¤solely âon visual⤠matches-verifyâ the exact âŁmodel âand⤠part number to⢠ensure fitment.
Can I replace theâ 137105100 hinge myself,â and what⤠tools are required?
Yes, many⢠owners canâ replace âthis hinge. Basic toolsâ usually required are a Phillips screwdriver, â˘a nut driver or socket set (commonly 1/4″-5/16″ âŁor⤠metricâ equivalent)and possibly âa putty knife or flat screwdriver to release clips. Always disconnect power⢠(and gas supply, ifâ applicable) before starting, support â¤the â¤door while removing â˘fastenersand keepâ track of screws and âany springs or clips.
Whatâ are the general⣠steps âŁto replace the doorâ hinge 137105100?
General steps: 1) unplug the dryer (and shut off⣠gas if applicable). 2) Openâ the door â¤and support it (have â¤a helper â˘or use â˘a block). 3) Remove the screws securing the hinge to the door or⣠cabinet. Depending âon⤠model you âmay remove the door from âthe hinge first. 4) Remove the old hingeâ and âtransfer any bushings or clips⢠to⢠the new hinge if required. 5) Install the new âhinge, align theâ door, âand tighten screws evenly. 6) Test open/close â˘operation and check the door seal. Consult âyour âmodel’sâ service manualâ for model-specific instructions.
Is 137105100 a leftâhand or rightâhand hinge, âandâ how do I choose the correct side?
some door hinges are side-specific. Verify⤠whether your âdryer uses a â˘left or right â˘hinge-parts listings will indicate orientation. If only one hingeâ is bad, replaceâ the⣠same âŁside. If the listing or part photo doesn’t clarify, provide your dryer model⣠number to âthe parts supplier to get the correctâ left/right version.
Does⢠the 137105100 hinge come with screws and âŁfasteners, âŁor do⤠I need âto reuse the old hardware?
Packaging varies by supplier.Some listings include mounting screws or small hardware, others are hingeâonly. when ordering, âŁcheck the product âŁdescription or⤠ask â¤the supplier. If⢠hardware is omitted,reuse the originalâ screws if they’re in good condition,or purchase appropriate replacements âŁwith the same thread âand length.
Is âŁit âsafe toâ operate the âŁdryer with a damaged hinge until â˘I can replace â˘it?
Operating â¤with aâ damaged hinge âŁisâ notâ recommended. A failing hinge âcan let the door misalign âandâ break the door seal, causing heat loss and longer â˘drying timesand⤠it can create a pinch⢠hazardâ orâ lead to⤠the â˘door falling and âcausing injury or further damage. If you must use the dryer briefly, keep â¤the load âlight, monitor âit,⣠andâ arrange âŁreplacementâ as soon as possible.
To Wrap It âUp
The 137105100 Frigidaire Dryer Hinge Door is a small but essential component thatâ supports the dryerâ door, ensures correct alignmentand allows smooth âŁopeningâ and closing.Properly functioning hinges maintain the door seal and engagement with safety switches, helping to preserve appliance efficiency, contain lint and âheatand â¤prevent â˘undue â¤stress on adjacent components. Whenâ the hinge â˘is compromised-through â¤wear, deformationor breakage-door performanceâ andâ overall dryerâ operation â¤can âŁbe â˘adverselyâ affected.
Accurate diagnosis and âtimely replacement â˘of âa faulty 137105100 hinge are â¤vital for⣠restoring safe, reliable operation and avoiding secondary damage. Identifying symptoms such as âsagging, misalignment, unusual ânoiseor difficulty closing helps determine⢠whether the hinge âis the cause; when replacement⣠isâ necessary, using the correct part⤠and following manufacturerâ specifications or engaging âa âqualified⢠technician âwill ensure proper fit and⢠function. addressing hinge issuesâ promptly is a âpractical measure to âŁmaintain âapplianceâ safety,performance,and âlongevity.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
