137108000 Frigidaire Water Drain âPump and Motor Assembly is an âelectromechanical drainâ module used⢠to remove standing water from an⢠appliance’s sump or tub. The assembly combines an electricâ motor with an impeller and⢠housing to generate the hydraulic flow required to route âwastewater through drain hoses and check valves; âit is indeed a replaceableâ service component mounted to the appliance chassis or sump. In âŁform and function it â¤serves as a compact pump/motor sub-assembly intended for field replacement during repair or maintenance.
Inside the appliance, the drain⢠pump interfaces directly with⢠the tub or âsump, the drain hose,â and the appliance control system. During drain and spin cycles the control board supplies timed power to the pump motor, which⣠evacuates water to the household â˘drain. The pump’s âoperation is coordinated with water-level detection devices, door or lid interlocksand sometimes with drain valves âŁor check valves; failures or restrictions in the âpump⤠path can affect cycle progression, water extractionand waste-water containment. mechanically and electrically the component must â¤maintain seal integrity,correct impeller rotation direction,and âreliable electrical connection under repetitive duty conditions.
In this â˘article readers will find aâ technical examination of âthe 137108000 Frigidaire Water âŁDrain Pump and Motor Assembly covering its⢠functional principles, typical applications âand model compatibility considerations, common failure symptoms (for example no-drain, partial-drain, unusual noise, leaksor motor overheating), step-by-step troubleshooting checks (visual âinspection, continuity and⣠voltage testing, obstruction removal), âand practical âreplacement considerations (gasket/seal handling, â¤connector and hose alignment,â mounting torqueâ and safety precautions).The goal⣠is to provide technicians, engineersand appliance owners with the contextual information âŁneeded âto diagnose issues âŁand perform safe, correct service or replacement.
Table of Contents
- Function and Role of the Drain Pump and Motor⤠in Frigidaire Appliances
- How the â˘137108000 Frigidaire Water Drain pump and Motor Assembly Operates⢠and Interfaces with Control Electronics
- Common Failure symptoms and Diagnostic Indicators for Drain Pump and Motor Malfunctions
- Replacement Considerations, âŁModel Compatibilityand Installation Best Practices
- Q&A
- Insights⣠and Conclusions
Function and Role of the Drain Pump and âMotor in Frigidaire Appliances
The 137108000 Frigidaire Water Drain Pump and Motor â¤Assembly is an⤠electromechanical subassembly that evacuates condensate and defrost water âfrom the appliance sump or â˘drain pan to â˘the building drain or disposal⢠route. The motor drives a small impeller housed in a molded pump body to â¤develop the head pressure necessary to move water through short hoses and check valves; âflow rates areâ modest but sufficient for periodic defrost cycles and routine condensate.As an OEM-style⣠replacement, this assembly must match the appliance’s mounting⢠footprint, electrical connectorand plumbing interface – technicians should verify the part number against⤠the appliance service sheet and confirm â¤that the harness pinout and mounting holes align before installation.
Operational behavior is determined by both electrical and hydraulic conditions: the motor should start promptly when voltage is applied, run smoothly without excessive vibrationand produce a steady discharge flow. Common faults âincludeâ clogged â˘inlet screens⤠or hoses, seized or damaged impellersand electrical failures such as⤠open windings or⤠intermittent connections. Troubleshooting âtypically includes a visual inspection forâ blockages, verifying supply voltage at the connector, checking motor winding continuity with âŁa multimeterand listening for abnormal noises that indicate mechanical wear. âRoutine service actions – clearing the drainâ path,⤠replacing degraded â˘hosesand securing mountingâ hardware – frequently restoreâ reliable⢠operation âwithout replacing the entire assembly.
- Symptoms technicians encounter: â˘no run or dead motor,humming with no flow,weak/intermittent pumping,visibleâ leaks or seepage at hose connections.
| Item | Description |
|---|---|
| Part | 137108000 âFrigidaire Waterâ Drain Pump and Motor Assembly – pumps condensate/defrost water from sump/drain pan |
| Electrical | Model-dependent voltage and current; consult appliance wiring diagram or serviceâ manual before substituting |
| Service âŁchecks | Inspect impeller/housing âfor debris, verify continuity and connector voltage, ensure hoses and check âvalves are clear |
How the 137108000 Frigidaire Water Drain Pump and Motor Assembly Operates and Interfaces with Control Electronics
The 137108000 Frigidaire Water Drain Pump and Motor âŁAssembly âis an integrated impeller pump and electric motor designed to evacuate â˘standing water from the appliance sump during drain cycles. The pump âis a centrifugal unit whose impeller is mounted directly on the motor shaft; when the motor receives a drive signal from the appliance control board the impeller converts rotational energy into flow and pressure to push water out the drain port. electrically âthe â¤assembly is typically switched by the mainâ control viaâ a relay or solid-state driver and may be driven by line voltage or a pulse-width-modulated âŁoutput dependingâ on the⤠model; mechanically it âmust match the housing orientation, mounting pointsand inlet/outlet hose diameters to be compatible with the appliance chassis and sealing surfaces.
- Common interface signals: switched mains, PWMor⣠on/off relay output from the control board.
- Typical failureâ symptoms:â motor hums but impeller doesâ not turn, no â˘flow, leakage at sealsor short/open windings.
- Compatibility checks: matchâ connector pinout, mounting flangeand ânominal voltage/current ratings.
From a troubleshooting and integration outlook, the control electronics decide when to energize the⣠pump based on level sensors,â float switchesor programmed drain intervals; the pump⣠itself doesâ not contain level detection, so correct operation requires the control⣠board to supply the âŁappropriate drive and timing.â For replacement or verification, technicians commonly measure the voltage at the pump connector while issuing a drain command and⤠compare â˘running current toâ the expected range to detect mechanical binding â˘or electrical faults. When selecting âŁaâ replacement, ensure the 137108000 Frigidaire Water Drain Pump and Motor Assembly matches the appliance harness, sealing interfaceand electrical ratings; if the pump fits mechanically but the electrical characteristics âdiffer,â the control electronics may not be able to drive it safely or reliably.
| Item | Description |
|---|---|
| Function | Evacuates sump water via aâ motor-driven impeller |
| Drive signal | Switched mains or PWM/solid-state output from control board |
| Connector | Appliance-specific 2-3 pin harness; pinout must match control board |
| Typical current draw | Generally hundreds of milliamps to aâ few amps depending on model and âvoltage |
| Common failure modes | Impeller blockage, bearing â¤wear, winding open/short, seal leaks |
Common Failure Symptoms â˘and Diagnostic Indicators for Drainâ Pump and Motor Malfunctions
The 137108000 Frigidaire water Drain âŁPump and âMotor Assembly is responsible for evacuating wash and rinse water by converting⤠electrical input into rotational⣠motion at the impeller. Proper operation requires the control board âto supply the correct drive signal and the impeller and shaft to rotate without excessive friction. Incompatible or worn assemblies will show mechanical symptoms (blocked or damaged impeller,⣠worn bearings, seized shaft) and electrical â¤symptoms (open windings,⣠intermittent contactor poor connector â¤continuity).Verify compatibility with the machine byâ cross-referencing model â¤and chassis part numbers beforeâ replacingâ the unit toâ avoid mating and electrical-connection issues.
- Humming with no âflow -â impeller jam or shaft seizure dueâ to foreign object.
- No sound and no operation – open circuit, failed motor windings, blown fuseor missing control voltage.
- slow draining â- partial blockage âŁin hose or pumpor degraded pump efficiency from wear.
- Loud grinding or ârattling â- bearing failure or debris contacting the impeller/housing.
- Intermittent operation – loose connector, corroded terminalsor intermittent âcontrol-board output.
Diagnostic checks include a visual⢠inspection and manual rotation of the impeller to rule out mechanical âobstruction, followed by electrical measurements during a drain cycle: verifyâ the presence of â¤the âexpected drive voltage at the⢠pump âconnector, âmeasure winding continuity and⣠resistance with a multimeterand use a clamp⤠meter to compare operating current âŁagainst acceptable ranges âor âbaseline measurements. If the motor draws more âcurrent âthan expected while producing reduced flow, the cause is typically mechanical binding; if⣠there is no voltage at the pump, trace the supply back to the â˘control â˘board and harness. Record observed symptomsâ (noise, speedand current) alongside service-manual specification checks âto isolate whether the fault lies in the pump/motor assembly, theâ harness/connectorsor the controlâ electronics.
| Item | Description |
|---|---|
| Humming / No Flow | Likely impeller jam, foreign objector seized shaft causing motor to stall under load. |
| No Electrical Activity | Open circuit, connector fault, blown fuseor no control-board output to⤠the pump. |
| High Operating Current | Indicates increased âŁmechanical drag from⤠bearing wear or partial blockage; check for overheating. |
Replacement Considerations, Model Compatibilityand Installation âBest Practices
The 137108000 Frigidaire Water Drain⣠Pump and Motor Assembly is â˘a combined impeller-and-motor unit that evacuates wastewater from â˘the appliance’s tubâ to the⤠house drain.⢠In operation the motor delivers short-duration high-torque pulses to overcome trapped debris or air pocketsâ while the impeller produces the required âflow against backpressure; common â˘failure modes include⣠impeller blockage, degraded shaft bearingsandâ sealâ failure that allows water ingress âinto the â˘motor. Technical examination should âinclude inspection of the impeller for foreign-object damage, verification that the motor shaft turns freelyand electrical âchecks of winding continuity and â˘connector pinouts before concluding the âŁassembly is faulty.
Replacementâ requires matching the assembly’s mechanical mounting,hose connections,and electrical characteristics to the appliance model rather than relying solely on part number similarity; some Frigidaire models accept the same pumpâ body butâ differ in inlet orientation or harness type. During installation, replace any perishable gaskets or â˘hose âclamps, route the discharge â˘hose to prevent traps or kinks that cause airlocksand verify sealing at the housing-to-tub interface. For practical testing, run the appliance’s drain-only diagnostic cycle after replacement to confirm correct flow and to detect noise or vibration that â˘indicate misalignment or motor bearing issues.
- Pre-install checks: compare model numbers and connector type, inspect discharge hose diameterand confirm mounting holeâ pattern.
- Installation steps: replace seals,tighten clamps evenly,secure electrical connectors,and perform a drain diagnostic cycle to verify operation.
- Troubleshootingâ tips: listen for humâ (motor stalled) versus free-running noise (bearing wear)and inspect impeller for âtrapped debris if flow is reduced.
| Item | Description |
|---|---|
| Electrical rating | Match voltage,â frequency,⤠and current draw printed on the original pump label or schematic â˘before connection |
| Connector | Confirm pin âcount and terminal âtype (e.g., sealed multi-pin harness âvs. insulated blade terminals) |
| Mounting | Verify flange pattern and orientation; some assemblies are⢠service-reversible âbut require adapter brackets |
Q&A
What is the 137108000 frigidaire âWater Drain Pump and Motor Assembly and which machines does â¤it fit?
the 137108000 is an OEM drain pump and motor assembly used âŁon a range of Frigidaire/ Electrolux laundry appliances (and⢠some related brands). It is indeed the component that removes wash/rinse water from the tub. Exact fitâ depends on the appliance model – always â˘verify compatibility by checking your appliance model number against the part crossâreference from Frigidaire or an authorized parts⢠supplier before purchasing.
Whatâ are common âŁsymptoms that this drain pump is failing?
Typical signs âinclude: washer not draining or very âŁslow draining, long or stuck cycles, audible grinding or rattling noises duringâ drain, leaks around the pump, a burning or electrical smellor intermittent âdraining. These symptoms can also be caused by clogs, so inspect hoses and the pump inlet before replacing the pump.
How can I test the 137108000 to confirm âit is bad?
Start with a visualâ inspection and remove debris from the pump inlet and impeller. Check that the impeller turns freely âby â˘hand. Electrically,â disconnect power and use a multimeter to âcheckâ for continuity through the pump motor (it should not âbe an open circuit – consult your service manual for the exact resistance specification). For a powered⣠bench test, only apply the pump’s rated voltage (check the label) while taking appropriate safety precautions and containing any water â¤- if the â˘motor âdoesâ not run when powered or runs inconsistently, the âpump â˘is faulty. If⢠you are unsure or uncomfortable with electrical tests, have a qualified technician perform them.
can the pump motor be repairedor should it be replaced as an assembly?
Most technicians replace the entire pump assembly. In many modern washer pumps the motor, impellerand housing are integrated and not â˘designed for field repair. You can sometimes clear jams or debris (small articles, lint, coins) to restore â¤operation, but worn bearings, fried windingsor damaged impellers require replacement of the assembly.
What is the correct procedure to replace âthe 137108000 pump?
Basic steps: unplug the appliance and⢠turn off water (if applicable).Drain any remaining water into a bucket. Remove the access panel(s) to reach the pump. Disconnect inlet/outlet hoses (expect â¤water spillage) and unplug the electrical connector(s), notingâ wire⣠positionsâ or⤠taking a photo for reassembly. Removeâ mountingâ screws/clips and swap the old pump for the new unit. Reattach hoses and wiring,secure the pump,restore power,and run a short drain/spin cycle to check for leaksâ and proper â¤operation. Follow the appliance service manual for modelâspecific details and safety instructions.
Why is the pump noisy after I installed aâ new 137108000?
Noise after replacement⤠can beâ caused âŁby trapped air in the system, loose pump mounting or brackets, hoseâ vibration, foreign objects in the impelleror a defective replacementâ unit. Verify â¤theâ pump is mounted securely, hoses are clamped correctly and not contacting the cabinet, âand the â˘impeller is free of debris.â If noise persists, theâ new pump could be faulty and should be returned under warranty.
Can I temporarily run the washer without a drain âpump if it won’t drain?
No – the washer relies â¤on the drain pump to remove â¤water.⣠Running cycles without a functioning drain pump risks âŁoverflow, water damageand motor/controls damage. â¤If the pump has failed, stop using the washer until the pump is repaired or â¤replaced. You can manually drain the machine as a⤠temporary measure, âbut do notâ operate⣠wash/spin cyclesâ without a working drain system.
How long does the 137108000 pump typically last and where should I buy replacements?
Service life varies withâ usage and water conditions but typical lifespan is several years (often 5-10 years).Heavy use, debrisor hard water âcan shorten life.⣠Buy OEM replacements from Frigidaire/ â¤Electrolux parts â˘departments or reputable appliance parts suppliers to ensureâ correct fit and quality.â Check the seller’s warranty (terms vary – âsome offer 90 days to â˘one year) and keep your appliance model numberâ handy when ordering.
Insights and Conclusions
The 137108000 Frigidaire Water drain Pump andâ Motor Assembly plays a central role in the proper operation â¤of compatible Frigidaire appliances by evacuating wastewater reliably and preventing standing water during and â¤after cycles. As a combined pump and motor unit designed for recurring duty inâ a wet environment,it contributes to appliance efficiency,cycle performance and helps prevent secondary issues such as odor,leakage or water-damage⤠to surrounding⢠components.
As symptoms of a failing drain pump can overlap with otherâ problems, accurate diagnosis â˘is critically important to avoid unnecessary ârepairs and to⢠restore reliable function. Indicators such as persistent standing water, unusual noisesâ during drain cyclesor appliance error codes warrant â˘inspection; confirming electrical continuity, âclearance of debris and theâ condition of hoses and seals helps⢠isolate the pump as âtheâ root cause. âWhen testing indicates pump failure or when the unit shows mechanical wear, timely replacement reduces â¤the risk of escalating damage and recurring service calls.
Selecting the correct replacement part and ensuring proper installationâ are keyâ to long-termâ performance; using the specified 137108000 assembly or an approved equivalent preserves fit, function and safety. For âusers without âthe âŁappropriate â˘tools or â˘experience, professional service isâ recommended to ensure safe⤠disconnection, correct mounting and proper electrical and plumbing reconnections. Taken together, careful diagnosis and correct⢠replacement of the drain pump assembly protect appliance reliability and minimizeâ further downtime or â˘repair costs.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
