W10201551 Whirlpool Oven Broil Element âis⣠a tubular âelectric heating element used in compatible Whirlpool ovens to provide the high-intensity, top-down heat required for âbroiling. The element⢠consists of a resistance⤠conductor enclosed in a metal sheath with insulating material adn terminalâ connectors; it is designed to convert the appliance line voltage into âradiant heat and âto⤠mount â˘at âthe top of theâ oven cavity were it can directlyâ heat food surfaces.
Inside the âappliance, âŁthe broil element âfunctions as the primary radiant heat source for broiling âand works in concert âwith the oven âcontrol system, selector switches or relay outputsand temperatureâ sensing/limit devices. Electrically it âŁisâ connected to the âŁoven’s wiring harness and is switched âŁby the control board⣠or⤠a mechanical selector; â˘thermally it contributes to âcavity temperature âŁand local surface browning while interacting with â¤door sealing, insulationand any heat shields. âŁCommon technical concerns âfor service personnel include â¤access to terminal connections through⣠the rear or âŁtop panel, expected open-circuit vs. short-to-ground failure modes,the effects of surface damage or loss of sheath âintegrity on performance,and the⤠need to match electrical and mechanicalâ specifications when servicing âŁthe part.
In this article you will findâ a â˘technical overview⢠of the W10201551 broil element covering its âfunctional â¤role, âhow to verify⣠compatibility with âspecific Whirlpool models, typical âfailure symptoms (such as lack of broil heat, âuneven heating,⣠visible arcing or burns), basic âdiagnostic checks (visual inspection,â continuity and voltage measurements)and practical replacement considerations including safety precautions and the importance of matching terminal type, mounting geometryand electrical rating. The details is presented toâ aid technicians, engineersand appliance âŁowners in accurate diagnosis and informed replacement decisions without⣠warranty or procedural claims.
Table of Contents
- Function and role âof the â˘Oven Broil Element in Heat âŁGeneration, Distributionand Control
- How the W10201551 âWhirlpool Oven Broil Element integrates â˘Electrically âand Thermally â˘with the Oven Cavity
- Common Failure Symptomsâ and Measurable Diagnostic Indicators of a Faulty Broil Element
- Replacement Considerations and Step-by-Step Installation Procedures âfor the W10201551 Broil Element
- Q&A
- Wrapping Up
Functionâ and⤠Role of the Oven⢠Broil Element in Heat Generation,â Distributionand control
The W10201551 Whirlpool Ovenâ Broil âŁElement is the⣠upper cavity âŁheating element â˘that converts electrical energy into intense radiant â¤heat through a resistiveâ conductor enclosed in a protective metal sheath. Its design produces âa concentrated top-down heat â¤source for rapid⢠browning, searing and finishing foods; unlike bake â¤elements âthatâ contribute to ambient cavity temperature, theâ broil element’s output is intended as a direct radiant source. Compatibility requires matching the element’s physical mounting, terminal configuration and electrical rating to the oven model and control system so the element cycles and âmounts correctly without altering oven control logic⤠or safety interlocks.
Heat distribution from the broil element is strongly directional: peak temperatures are directly beneath the element and fall off with distance, â¤so âŁrack position determinesâ cooking intensity and âŁevenness. The oven controlâ or a dedicated broil⣠selector typically⤠energizes the element via a relay or controlâ board,providing on/off cycling rather than continuous closed-loop temperature modulation; thermal cutouts and oven âŁthermostats âprovide overtemperature â˘protection. Typical diagnostic indicators of element degradation â˘are uneven heating,reduced radiant intensity,visible breaks,or arcing at terminals; technicians verify operation with continuityâ and resistance checks andâ inspect âŁfasteners⣠and wiring before replacement to ensure safe,reliable performance.
- Functional traits: rapid â˘radiant output, high surface temperature, focused top-down heat.
- Control behavior: relay or control-board switching, short âdutyâ cyclesâ during broil mode.
- Common diagnostics: continuity test,visual inspection for âblisters/breaks,terminal integrity.
- Replacement checks: match âmounting holes, terminal typeand electrical rating to ensure â˘compatibility.
| Item | Description |
|---|---|
| Location | Upper oven cavity, mounted to roof panel to provide direct radiant heat. |
| Function | Produce high-intensity radiant⢠heat for broiling, browning and searing. |
| Control Interface | Energized by â¤oven control/relayâ or broil âselector; cycles on/off rather than modulating⣠continuously. |
| Diagnostic⢠check | Continuity/resistance âmeasurement and visual inspection for⢠breaks,⤠arcingor discoloration. |
| Typical symptom | Uneven or weakâ broil performance, visible element damageor intermittent operation. |
How the â¤W10201551 Whirlpool â˘Ovenâ Broil Element integrates Electrically⤠and Thermally with the Oven Cavity
The W10201551 Whirlpool Oven âBroil Element is aâ high-power resistive heating assembly⢠that⢠integrates âelectrically with the oven’s âmains supply through insulated spade terminals at⤠the element’s mounting bracket.In operation the control board⢠or mechanical selectorâ routes line voltage to the element via⤠relays or switches;⤠the⣠element presents a low-resistance⤠load âthat draws âseveral amps at typical household oven voltages (208-240â V). Proper⢠electrical integration therefore âŁrequires matching terminal spacing and secure connections to the oven’s terminal block, correct wire gauge andâ strain âŁreliefand âa functioning control relay or thermostat âin the circuit. Technicians replacing âthis part should verify voltage â˘compatibility and confirm that the element’s terminal type matches the ovenâ harness to âŁavoid âŁloose âcontacts â˘and arcing.
thermally, the broil element couples âto the oven⣠cavity primarily by radiant heating: the element surface reaches highâ temperatures and emits infrared energy toward the cooking â¤area and âŁreflective oven walls, while convection currents distributeâ heat throughout the⣠cavity. The element’s mounting bracket and sheath also conduct heat into the oven chassis, so clearance, insulationand the condition ofâ the⢠mounting hardware affect⤠cycle stability and heat distribution. âPractical indicators of thermal⢠integration âproblems⣠include uneven browning, hotspotsor accelerated oxidation of the element surface;â these symptoms often correlate with âŁbent brackets, damaged insulationor improper positioning. For quick reference, consider the⤠checklist and⢠specification tableâ below when diagnosing or replacing the element.
- Electrical: â¤spade-terminal connections, matching voltage, secure terminal block, circuit â˘protection.
- Thermal: âradiant emission âto âŁcavity, conduction through mounting, âinfluence of reflective surfaces.
- Installation check: correct âŁterminal spacing, intact insulation, no physical deformity, proper âgrounding.
- Symptoms⢠of failure: uneven âbroiling, no⤠heat output, tripped circuit breaker, visible burns or breaks.
| Item | Description |
|---|---|
| Function | Radiant â¤broil â˘heating element for â¤the oven cavity |
| Electrical interface | Insulated spade⤠terminals to oven terminal block; â¤operatesâ on typical â˘household oven â˘voltages (208-240 V) |
| Thermal behavior | High surface temperatureâ with primary âŁheat transfer by radiation and secondary by conduction to mounting |
Common Failure Symptoms and Measurable Diagnosticâ Indicators of a Faulty Broil Element
The W10201551 Whirlpoolâ Oven Broil Element is a top-cavity resistive heating assemblyâ designed â¤to produce high-intensity radiant heat for broiling and browning operations. Constructed as a sealed⤠metal sheath containing a high-resistance⢠alloy conductor, the element mounts âto the oven interior with terminal lugs that â˘connect to the appliance wiring harness; correct fit depends on element length, terminal type,⣠and mounting clip locations rather than on generic appearance âŁalone. âŁin operation the âŁelementâ draws full â¤line voltage during a broil cycle and should glow uniformly along its length; mismatches in physical dimensions or terminal configuration will cause⣠compatibility⤠or installation issues⣠even if electrical characteristics appear â¤similar.
Technically measurable â˘failure indicators include both electrical âreadings and â˘observable behavior. Visually inspect for breaks, blisteringor separation of the sheath from terminals; electrically, â˘use an insulatedâ multimeter to check⢠for continuity across the two element terminals and verify there isâ no continuity fromâ either terminal to chassis ground.â If the element reads open (infinite resistance) it âhas â¤failed; if it shows a substantially higher-than-expected resistance it will⤠underheat,and a low or zero⣠resistanceâ to chassisâ indicates âa ground fault that can trip breakers. A âŁlive-voltage test â¤during a broil call should showâ approximately⤠line âvoltage acrossâ the element â¤terminals; presence of line voltage with no heat indicates an open or high-resistance âelement, while⢠tripping or smell⤠of burning suggests shorting or internal sheath compromise.
- No heat orâ weak heat output despite correct oven controls and confirmed line voltage.
- Intermittent âheating or sections of the elementâ that do not glow evenly.
- Visible physical damage: blistering, â¤breaksor discolored spots on âtheâ sheath.
- Open circuit on an ohmmeter (infinite Ί) âor resistance well outside expected range.
- Continuity from a âŁterminal to chassis (ground fault)â causing trips or shocks.
| Item | Description |
|---|---|
| Typical cold resistance | Approximately â 10-30 â˘ÎŠ (varies by âelement length and wattage; use OEM âspecification if available) |
| Expected voltage during broil | Approximately 240 â˘V across⤠the two element terminals when the broil relay/contactor is closed (U.S. residential ovens) |
| Insulation/ground test | No continuity (open) from either terminal to chassis; âany measurable continuity indicates a fault |
Replacement Considerations and Step-by-Step Installation âŁProceduresâ for the W10201551 Broil Element
The W10201551 Whirlpool Oven Broil â˘Element is a resistive tubular heater that provides the concentrated top-heat required for âbroiling.It is secured to â¤the oven cavity by mounting tabs and terminated with insulated âspade â˘connectors; functionally it âŁconverts line voltage into radiant heat via⣠an internalâ resistance coil within a âcorrosion-resistant sheath. Typical failure modes include open-circuitâ (no continuity), localized hot spots â¤or blisteringand short-to-ground; these manifest asâ no broil â¤heat, uneven browningor blown breakers. Verify compatibility by matching mounting hole spacing, terminal typeand nominalâ voltage to the oven model⤠before replacementand confirm the element part number against the oven⣠model list or âservice manual rather than relying on⤠visual similarity⤠alone.
- Start by removing power âat the household breaker and verifying de-energized lines with a voltage tester.
- Pull out oven âracks âand âaccess⢠the broil element; remove the two mounting screws visible at the frontâ of the âelement.
- Carefully pull the element forward to expose⣠the⤠spade terminals and disconnect them by sliding⣠off the insulated connectors (note orientation âfor reassembly).
- Inspect terminal boots and cavity âinsulation; replace â˘any damaged insulation or connector boots before⢠installingâ the new element.
- Attach the replacement⤠element to the spade terminals, secure the mounting⣠screws, reinstall racks, ârestore âŁpowerand perform âa⤠continuity âand â˘functional âbroil test at a low setting.
Replacement planning should include a multimeter for continuity andâ a basic toolset (screwdriver, âneedle-nose pliers, terminal boots). After âŁinstallation measure element continuity (expected finite resistance) and check for â˘leakage to chassis (ideally open between element and ground). Observe the âinitial broil cycle for uniform heating across the element; uneven heating or audible⤠arcing indicates a faulty unit or poor⤠electrical connection and ârequiresâ re-inspection of terminations and mounting.
| Item | Description |
|---|---|
| Model | W10201551 Whirlpool Oven Broil Element – check exact oven model fit list |
| Terminals | Insulated âspade connectors;â confirm spacing â˘and orientation |
| Typical âchecks | Continuity (finite resistance), no⣠continuity to chassis,⣠secure mounting, no visible damage |
Q&A
What â¤is the W10201551 broil element?
The W10201551 is an OEM replacement âbroil⣠(upper) heating element âŁused in many Whirlpool-built ovens and ranges. It is indeed the tubular⢠metal element âŁthat heats when you select a broil orâ upper-heat function.Always confirm compatibility by checking â¤your appliance model ânumber â¤against â¤theâ partâ listing⤠before purchasing.
How do I know if⣠the broil element is bad?
Common signs of a failing broil element include no heat from â˘the âbroil⢠cycle, extremely slow or uneven broiling, visible â˘blistering âor breaks in the element surfaceor the⣠element causing âŁa short (tripping a âbreaker). if â¤the element glows unevenly â¤or has obvious damage, it should beâ replaced.
How can I test⣠the W10201551 element âwith âŁa⢠multimeter?
Turn off power âŁat the breaker and disconnect the⣠oven. Access the element terminals, set your multimeter to âcontinuityâ or ohmsand⣠measure across the two element terminals. A good element will show continuity and a relatively low resistance (typically a few⣠to several tens ofâ ohms). If â˘the meter reads open/infinite, theâ element is â¤broken. Also test⣠each terminal toâ the metal sheath/chassis: you should see no⤠continuity; continuity to â˘chassis indicates an internal short and the element⤠must be replaced.
Can I install the W10201551 myself, âŁand what are the basic steps?
Yes, âa mechanically inclined âhomeownerâ can usually replace it. Safety first: disconnect power âatâ the â˘breaker. Remove oven racks, then remove the mounting screws or retaining bracket securing the element â¤at the rear âŁof the oven cavity.Pull the element forward âŁto access â¤the two spade⣠terminal â¤connections, disconnect the⢠wires (note orientation), install the new element, secure the mounting screws, restore powerand test. âIf you âŁare not⣠agreeable working with electrical connections or removing panels, hire â¤a technician.
How much does the W10201551 typically cost and where shouldâ I buy â˘one?
Retail pricing varies by supplier but OEM âbroil elements commonly range âfrom about $25 to $75.⢠Buy⢠from Whirlpool/Maytag/KitchenAid authorized parts dealers,â reputable appliance parts websitesor local â˘appliance repair shops to ensure you get âŁa genuine or âŁcorrectly specified replacement. â¤Avoid guessing â˘on fit – âverify your appliance model⢠number first.
If the new element â¤still doesn’t heat, what else could be wrong?
If a verified-good element⤠has â˘continuity but still⣠does not âheat, the problem may be⣠in the oven control boardâ or its broil relay, a faulty selector switch orâ thermostat, aâ blown thermal fuse/limit thermostatorâ damaged â¤wiring/connectors. With the broil function called, you can â(safely) check for line voltage at the element terminals; lack âŁof voltage indicates â¤a control or wiring fault rather than â˘the element.
Is W10201551â interchangeable âwith other part numbers or aftermarket elements?
Some elements from different⢠manufacturers are electrically and physically interchangeable, â˘but âfit and âterminal spacing must match. âŁUse â˘the OEM part⢠number âlookup for your appliance model to find approved cross-references. If using an aftermarket part, â¤ensure dimensions, mounting⣠styleand terminal types match⤠exactly to âavoidâ installation⢠or safety issues.
How long do broil elements âlast and⤠how⣠can I extend thier life?
broil elementsâ commonly last several years (often 5-15â years) depending â¤on usage and care. To extend life: â¤avoid slamming racksâ into theâ element, clean spills promptly with â¤manufacturer-recommended âcleaners (don’t use harsh abrasives directly on the element), doâ not coat the element with foil or⣠liquidsand preheat properly ratherâ than using excessively high âtemperatures unnecessarily. Routine visual⣠checks âcan catch â˘early damage.
Wrapping Up
The W10201551 Whirlpool oven broil element is aâ key component âin achieving high-temperature, direct-heat âcooking functions. âAs the part âŁresponsible for generating the â¤concentratedâ heat required for â˘broiling, it directly affects⢠cookingâ performance, heat distributionand overall⤠oven reliability. Proper operation of thisâ element supports consistent browning, searing andâ finishing of dishesand contributes to the âŁappliance’s efficiency and user satisfaction.
Timely and accurate diagnosis of broil-element issues-such asâ uneven heating, visible damageor failure to⤠reach broil temperatures-is important to restore safe and reliable⣠oven performance. When testingâ indicates the W10201551 element is defective, replacing it with the correct, compatible part helpsâ ensure proper function âand âmaintains manufacturer â¤specifications. Correct installation and verification of operation⢠reduce the risk⢠of further appliance damage âand can prevent safety hazards associated with degraded heating elements.
Whether performed by a â˘qualified technician or⣠a informed âhomeowner following the manufacturer’s guidelines, diagnosis and replacement of the W10201551 broil element should be approached methodically and â¤with attention to safety âŁand compatibility. Doing â¤so preserves âŁappliance performance, extends service lifeand helps maintain the âcooking results consumers expect from their âWhirlpool ovens.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
