316011200 Frigidaire Oven Top Burner Ignitor is an ignition component manufactured for use in Frigidaire range and oven cooktop assemblies; it is teh electrical device responsible for initiating combustion at a top burner. As a dedicated ignitor assembly it is designed to produce the energy required to light a gas burner-either by generating a spark or by providing a hot surface depending on the specific appliance design-and is normally mounted adjacent to the burner ports or integrated into the burner head to achieve reliable ignition.
Within the appliance, the ignitor interfaces directly with the gas delivery and control systems: it receives electrical drive signals from the range’s control board or spark module, is positioned to apply ignition energy to the gas-air mixture at the burnerand works in concert with the gas valve and any flame-sensing or safety interlock circuitry. Proper operation requires compatible electrical connections, correct positioning relative to the burner portsand sufficient thermal and mechanical durability to withstand the cooktop environment; failures can affect ignition timing, flame stability and system safetyand can be caused by wiring faults, control module issues, or physical degradation of the ignitor element.
This article will cover the ignitor’s functional principles, model compatibility and cross-reference considerations, common failure symptoms to recognize in the field, practical troubleshooting steps and diagnostic checks that a technician or experienced owner can perform, and key factors to consider when replacing the part-including connector types, mounting details and safety precautions to ensure correct and reliable installation.
Table of Contents
- Function and Role of the Top Burner Ignitor in Frigidaire Gas Ovens
- How the 316011200 frigidaire Oven Top Burner ignitor Works Inside the Appliance
- Common Failure Symptoms and Diagnostic Indicators of Top Burner Ignitors
- Compatibility with Frigidaire Models,Replacement Considerations,and Installation Procedures
- Q&A
- Wrapping Up
Function and Role of the Top Burner Ignitor in Frigidaire Gas Ovens
The 316011200 Frigidaire Oven Top Burner Ignitor is the electrical ignition element that initiates combustion at a gas oven’s top burner. it delivers the thermal or electrical energy required to ignite gas at the burner ports and is integrated with the oven’s safety circuitry so that the gas valve opens only after the ignitor reaches its operating condition. In practical terms,the component’s measurable behavior-time to reach operating temperature or produce a consistent spark,electrical continuity,and stable output while powered-directly determines ignition reliability and the safe operation of the gas train.
Compatibility and correct operation depend on matching the ignitor’s mounting footprint, connector type, and electrical characteristics to the oven model; replacing a degraded ignitor with the correct unit restores expected ignition timing and flame stability. Typical failure modes include failure to glow or spark, extended ignition delay, repeated valve cyclingor continuous clicking from the control module; technicians verify functionality by visual inspection for ceramic or electrode damage, continuity checks with a multimeterand bench testing the ignitor under nominal voltage per the service manual. Practical replacement checks include confirming the part number or equivalent specifications, ensuring secure spade or wire connectionsand verifying that the ignitor achieves the required operating condition to allow the safety valve to open.
- Common symptoms of failure: no ignition glow/spark, delayed ignition, continuous valve cyclingor burner gas odor prior to ignition.
- Key replacement checks: match mounting and connector, inspect ceramic insulation, verify electrical continuity and proper current draw against service data.
| Item | Description |
|---|---|
| Function | Generates the heat or spark necessary to ignite burner gas and satisfies safety interlock conditions. |
| Connection | Replaces the original mounting and electrical connector; must match OEM wiring and mechanical footprint. |
| Diagnostics | Visual inspection, continuity/resistance measurement, timed warm-up or spark verification under nominal supply voltage. |
| Compatibility | Use the exact part number or an electrically and mechanically equivalent ignitor specified for the Frigidaire model. |
How the 316011200 Frigidaire Oven Top burner Ignitor Works Inside the Appliance
The 316011200 Frigidaire Oven Top Burner Ignitor is the ignition component that provides the initial energy to light a burner; depending on model design it functions either as a spark-type electrode assembly that creates repeated high-voltage sparks across a small gapor as a hot-surface element that heats until it glows and enables the gas valve. When a burner control calls for heat, the range control or electronic ignition module applies voltage to the ignitor. In spark systems you will observe a rapid series of sparks at the electrode until the gas lights; in hot-surface systems the element heats visibly and the gas valve will open only when the element draws the designed current. The ignitor sits beneath the burner cap with ceramic insulation and a wire harness or terminal connection, so physical alignment, electrode gapand secure grounding directly affect reliable behavior.
Technicians and appliance owners can evaluate the 316011200 Frigidaire oven Top Burner Ignitor by visual inspection and simple electrical tests: look for cracked ceramic, carbon trackingor pitted electrodes; measure continuity or element resistance with a multimeter; and verify that the control module is supplying the correct voltage or pulses at the connector. common installation issues include incorrect mounting height or damaged harness connectors that prevent proper spark formation or thermal coupling. For replacement, match the electrical connection, mounting points, and type (spark vs. hot-surface) to ensure compatibility; after installation test for consistent spark or steady glow and confirm the burner lights without extended delay or continuous sparking.
- No ignition when knob is turned
- Continuous or repeated sparking after flame establishes
- Ignitor element does not glow (hot-surface) or no spark is visible (spark-type)
- Visible damage: cracked ceramic, corrosionor carbon tracking
| Item | Description |
|---|---|
| Part | 316011200 Frigidaire Oven Top Burner Ignitor – OEM-style ignition element for compatible Frigidaire ranges |
| Function | Provides ignition energy via spark pulses or hot-surface heating to initiate combustion |
| Service checks | Inspect for physical damage, verify continuity/resistanceand confirm control-module voltage at connector |
Common Failure Symptoms and Diagnostic Indicators of Top Burner Ignitors
The 316011200 Frigidaire Oven Top Burner Ignitor serves as the primary ignition element for a range’s top burners, either as a spark-type electrode or a hot surface element depending on the model series. It is indeed a field-replaceable component that interfaces with the burner head, the control moduleand the range wiring harness; correct physical mounting and matching connector pinout are required for compatibility. functionally, a spark electrode produces a high-voltage discharge to ionize the gas/air mixture while a hot surface ignitor heats to incandescence to open a safety gas valve. Technicians should verify that the replacement part matches the original in both connector arrangement and recommended operating voltage before installation.
Common failure indicators are electrical and combustion behaviors that point to either an open/shorted ignitor, degraded insulation on an electrodeor a control-side fault. Measurable diagnostics include continuity and resistance checks for hot surface types and visual inspection for cracks,carbon tracking,or eroded electrodes on spark units; also observe the presence or absence of a spark during an attempted ignition. Practical examples: a burner that clicks repeatedly but never lights can indicate a weak or fouled spark electrode or an ignition module timing fault, while a burner that glows dimly or fails to reach full temperature often shows elevated resistance on a hot surface ignitor. Use a multimeter with the circuit de-energized and the gas supply isolated for tests,and compare readings to OEM specifications.
- repeated clicking with no spark visible – inspect electrode gap, ceramic insulatorand wiring continuity.
- Delayed ignition or small flame – check hot surface ignitor resistance and heater glow intensity.
- No continuity or infinite resistance on multimeter – hot surface ignitor likely open-circuited.
- Visible cracks, carbon tracking, or corrosion on electrode - replace to restore reliable sparking.
| Item | Description |
|---|---|
| Typical diagnostic checks | continuity/resistance for hot surface ignitors; visual and spark tests for electrode-type ignitors; verify connector voltage during ignition pulse. |
| Reference measurements | Resistance and operating current vary by design – compare to OEM spec; many hot surface elements fall into low-ohm ranges, while spark electrodes show continuity only through the control circuit. |
Compatibility with Frigidaire Models, Replacement Considerationsand Installation Procedures
The 316011200 Frigidaire Oven Top Burner ignitor serves as the electrical ignition element for compatible Frigidaire cooktop assemblies and must match the burner’s mechanical and electrical interface to function correctly.Compatibility is persistent by physical fit (mounting flange and electrode position), connector type (spade, bullet, or harness)and the ignition system architecture used by the range. Technicians should verify the appliance model and cross-reference OEM parts lists because visually similar ignitors can differ in electrode length, insulator shape, or terminal placement; a mismatched electrode can cause weak or misdirected spark, intermittent ignition, or contact with the burner cap that degrades performance over time.
replacement and installation focus on preserving the electrode geometry and ensuring reliable electrical connection. Before beginning any work, disconnect electrical power and close the gas supply; after removal, inspect the porcelain insulator and electrode tip for cracks or erosion and use a multimeter to verify continuity against manufacturer specifications. Reinstall the new ignitor in the same orientation, secure the mounting hardware to prevent movement, and reconnect the ignition harness; following reassembly, confirm correct operation by observing spark position and consistency during several ignition attempts and by verifying that the ignition module is supplying the expected high-voltage pulse. Common pre-replacement checks and post-installation verifications include:
- confirm appliance model number and OEM part cross-reference.
- Inspect connector type and measure continuity on the old ignitor before removal.
- Ensure electrode clearance from the burner cap and proper insulator integrity after installation.
- Test ignition cycles and check for consistent spark timing from the ignition module.
| Item | Description |
|---|---|
| Part | 316011200 Frigidaire Oven top Burner Ignitor – OEM replacement element for specified Frigidaire cooktops |
| Key checks | Verify connector type, electrode position, insulator condition, and model cross-reference |
| Tools & tests | Basic hand tools, multimeter for continuity/resistance, visual inspection of electrode geometry |
Q&A
What exactly is the 316011200 Frigidaire Oven top Burner Ignitor?
The 316011200 is an OEM Frigidaire surface-burner ignitor (spark electrode) used on the cooktop/top burners of certain Frigidaire/Frigidaire Gallery/White-Westinghouse gas ranges. It is the small ceramic-tipped electrode that produces the spark to ignite gas at a surface burner.
What are common symptoms that this ignitor has failed?
Typical signs of a failing or damaged ignitor include one or more burners that do not spark or click, intermittent sparking, a weak or inconsistent sparkor visible cracks or carbon buildup on the ceramic insulator. You may also hear the ignition module clicking but see no spark at the electrode.
How can I test the ignitor to confirm it needs replacement?
First visually inspect the ceramic tip for cracks, chips or heavy carbon deposits.Then cut power to the range and use a multimeter set to continuity or low ohms to check the electrode wiring-most spark electrodes are simple conductors and should show continuity (a low-resistance reading or beep on continuity). An open (infinite) reading means the electrode is broken. Note: if the electrode shows continuity but still won’t spark, check wiring, the ignition moduleand grounding as well.
Is this part easy to replace and what tools are needed?
Yes-replacement is typically straightforward and takes about 15-45 minutes. Common tools: screwdriver or nut driver (for burner/top panel screws), socket set (if required), needle-nose pliers, and a multimeter (for testing).Always disconnect electrical power to the appliance before starting. You may also want to take photos of the wiring before removal to aid reassembly.
Do I need to shut off the gas to replace the ignitor?
For a surface burner ignitor replacement you should disconnect electrical power to the range. Shutting off the main gas supply is not strictly required if you are only removing the electrode and not the gas valve or fuel lines,but turning the gas off at the supply is a prudent extra safety measure if you feel more cozy doing so.
What could cause the ignitor to click but not light the burner?
If the ignitor is clicking but the burner won’t light, possibilities include: the electrode is fouled or too far from the burner cap (misaligned), the burner ports are clogged with food/grease, the burner cap or base is seated incorrectly, the ignition module or wiring is faultyor there’s no gas supply (valve closed or interrupted). Start with cleaning and re-seating the burner and checking electrode position; if spark is weak or absent, test/replace the electrode or ignition module.
How do I confirm this is the correct replacement part for my model?
Locate your range’s model number (usually on a tag behind the oven door,on the frame,or on the back of the unit) and cross-reference it with Frigidaire’s parts list or an authorized parts distributor. Search for part number 316011200 and verify compatibility with your exact model. Many parts sites also offer model lookup tools to confirm fitment.
Are there aftermarket options and does the OEM part come with a warranty?
Aftermarket replacement ignitors are widely available and might potentially be less expensive, but OEM parts (316011200) are made to original specifications and tend to provide a more reliable fit. Warranty terms vary by supplier-OEM parts purchased from Frigidaire or authorized dealers commonly include a limited parts warranty (check the seller’s warranty policy for duration and coverage). Keep proof of purchase and part packaging if you need to make a warranty claim.
Wrapping Up
The 316011200 Frigidaire oven top burner ignitor serves as the primary component that initiates combustion for the stove’s top burners. by generating the spark or heat necessary to light the gas, a properly functioning ignitor supports reliable ignition, consistent flame stability and efficient cooking performance. Because it directly affects how the burner lights and maintains heat, the ignitor is a small but essential part of overall appliance operation and safety.
Timely and accurate diagnosis of ignitor problems is critically important to distinguish between a worn or damaged ignitor and other potential causes of ignition failure, such as gas supply or control issues. replacing a faulty 316011200 ignitor with the correct, compatible part restores consistent performance, reduces the risk of unsafe operating conditionsand can prevent additional wear on related components. proper replacement also helps maintain energy efficiency and prolongs the useful life of the appliance.
When repair or replacement is required, following the manufacturer’s instructions or engaging a qualified technician ensures that the correct part is installed and that safety protocols are observed. Appropriate diagnosis, selection of the proper replacement componentand professional installation, when needed, provide the most dependable route to restoring safe, efficient burner operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
