A00099902 Frigidaire Dishwasher Door Latch is a dishwasher door latch assembly used on âselect âFrigidaireâ dishwashers; it is a combined mechanical and electrical interlock component designed to âsecure the⤠door during operation and provide a door-closed signal to the appliance â˘control âsystem.⣠The â˘assembly typically âconsistsâ of a latch hook or striker, mounting points that engage the tubâ frameand one or more microswitches or âelectrical contacts housed in⤠a molded carrier; materials are generally âa mix of engineered plastics andâ small⢠metal hardware intended to withstand repeated â˘actuation and exposure to a wet environment.
Functionally, âthe A00099902 latchâ interfaces directly with âthe door frame, gasket⤠sealing surface and the dishwasher control circuitry.⤠Mechanicallyâ it holds the door â˘tightly⤠against the tub gasket â¤to⤠maintain a âwatertight seal and ensure correct alignment of âthe âdoor â˘for detergent dispenser operation. Electrically â¤it provides the control board âwith a status input (door closed/latched) and may participate in safety interlocks that prevent the âwash cycle from starting or continuing if the door is not âŁproperly engaged. âFailure of the latch can therefore affect water containment, cycle initiation, â˘and safetyâ interlocks; it is also âa commonâ source of diagnostic⤠fault⣠codes related⤠to door status or âleaks. technically relevant detailsâ include the latch’s mounting orientation, switch contact types, connector pinout, expected âŁactuation forceand wear points such as springs, striker surfacesand switch actuators.
in this article âyou will find a detailed examination of the A00099902’s internal function â˘and construction, guidance on model compatibility and how to verify correct part fitment,â common failure symptoms and how to âinterpret related control board fault codes, stepâbyâstep troubleshootingâ procedures including continuity and âactuation testsand practical considerations for⤠safe⢠removal⣠and replacement such as required tools, alignment checks,⣠and postâinstallation verification. âThe objective is to provide technicians, engineers and informed appliance owners with the technical context and diagnostic â˘steps needed to assess latchâ condition, determineâ whether⣠replacement âis necessaryand ârestoreâ correct door operation.
Table of â˘Contents
- Functional Role and Safety⣠Interlocks of the âDishwasher Door Latch Assembly
- How the A00099902 Frigidaire Dishwasher â¤Door Latch â˘Interfaces with Door Sensors,Switches,and the Control Board
- Common Failure âModes,Diagnostic Symptoms,and Related error Codes for the Door Latch
- Replacement Considerations and Step-by-Step Installation Procedure for the Door Latch Assembly
- Q&A
- To Wrap It Up
Functional Role and Safety Interlocks of the Dishwasher Door Latch Assembly
The A00099902â Frigidaire Dishwasher Door Latch combines a mechanical striker and an âelectrical interlock to provide a definitive â¤door-closed signal⤠to the⤠control âelectronics while also pulling the door tight âagainst the tub seal. Mechanically, the latch engagesâ a striker â˘on the door to⢠create â¤the ârequired compression of the âŁdoor gasket; electrically, one or more internal microswitches (or a⤠single multiâpole switch) close when the latch is fullyâ seated to indicate a safe condition for pump, heater,⤠and spray-arm âoperation. This dual role âmeans the component must â˘match theâ door strike geometry and the harness connector âof the chassis so that switch activation occurs âat the correct point⢠of travel and the control⢠board receives the expected contact closure⣠behavior.
Technicians typically evaluate latch function through visual inspection,mechanical feel,and electrical continuity checks: look for cracked plastic,weakened springs,or worn actuator surfaces⤠that allow the door to âappear closed while âswitches âremain open. A common troubleshooting sequence is to âŁobserve whether the âŁdishwasher will start with the door mechanicallyâ held closed,measure continuity â¤across âthe latch switch while operating the door,and confirm harness pinout compatibility before replacingâ the assembly.â Practical â¤replacement⣠considerations include aligning the strike height so gasket compressionâ is even (preventing leaks) and verifying the replacementâ part’s connector and mounting hole â˘pattern to avoid intermittent âdoorâclosed signalsâ or improper⣠sealing during the âwash cycle.
- Primary functions: mechanical retention âŁand electrical⢠door-closed interlock.
- Common symptoms of failure: no-start, cycle stops⣠mid-run, intermittent operationor door-edge â˘water leaks.
- Diagnostic checks: visual/motion inspection, continuity test across switch contacts, verify connector pinout.
- Replacement checks: matching strikeâ geometry, harness âconnectorand mounting alignment.
| Item | Description |
|---|---|
| Latch mechanism | Engages door striker and⢠provides required gasket compression for a watertight seal. |
| Switch contacts | Provides theâ door-closed signal to the control board; testable for continuity when latched. |
| Compatibility checks | Verify connector type, mounting holesand âŁstrike position match the âappliance before â¤installation. |
How the A00099902 Frigidaire âDishwasher Door Latch Interfaces with Door Sensors, Switchesandâ the Controlâ Board
The A00099902 âFrigidaire⢠Dishwasher Door Latch combines a mechanicalâ catch with oneâ or more electrical sensing contacts to inform the machine when the âŁdoor is securely âclosed and to hold it closed during a cycle. When the door is shut, the âlatch plunger actuates internal⤠switch(es) or a sensor, changing the circuit state âpresented to the controlâ board; the board âchecks this input before energizing pumps, valves,â and the user-interface lock. Proper alignment⣠ofâ the latch with the door striker and a⤠clean, corrosion-free contact âsurface â¤are⢠necessary for reliable signaling; a worn or misaligned A00099902 can produce intermittent closure, preventing the control board from initiating âor continuing a wash cycle.
Technically, the latch âis aâ passiveâ input device⤠to the control system:â most implementations use one contact for door-sense (closed/open) and may â˘provideâ a secondary contact for a lock or inhibit signal. The control âboard expects âŁa defined logical state⤠from that contact (commonly⢠continuity when latched) and will fault if the state is inconsistent⤠during key moments âsuch as fill or spin. âFor practical diagnosis, verify mechanical operation and use a multimeter to check continuity with the door latched; replace the A00099902 when contactsâ show intermittentâ behavior or when theâ mechanical catch noâ longer secures the door. Typical indicatorsâ and considerations⢠include:
- Symptom: dishwasher âŁwill not start or stops mid-cycle – possible open door-sense contact.
- Feature: provides⤠both mechanical retention âand electrical door-closed signal; some âvariants âinclude a separate lock circuit.
- Check: verify alignment, inspect for moisture/corrosionand â¤measure continuity with the latch engaged.
| Item | Description |
|---|---|
| Signal type | Mechanical switch contact(s) that changeâ state âwhen the door is latched â(commonly closed â˘continuity when latched). |
| Function | Provides âŁdoor-closed indication to âŁthe control â¤board and mechanically retains the door during operation. |
| Common fault | Intermittent open circuit or failed latch mechanism âcausing no-starts, mid-cycle stopsor false door-open errors. |
Common Failure Modes,Diagnostic Symptoms,and Related Error Codes for⤠the Door Latch
The A00099902 Frigidaire Dishwasher â¤Door Latch â is a combined mechanical striker⤠and door switch assembly that secures âŁtheâ dishwasher door â¤and tells the âcontrol board when the door is properly closed⤠and latched. Functionally,â the part âprovides both the physicalâ retention of the door during a cycle and the low-voltage âsignal input âthat⤠enables â¤the machine⣠to start âŁandâ to engage the control’s âlock logic. The assembly typically includes a plastic latch housing, âŁa âspring-loaded keeperand an integral microswitch or plunger⢠sensor; compatibility is model-specific, so the correct A00099902 unit must be used toâ ensure the⣠actuator geometry and â¤switch ratings â¤match the⤠dishwasher’s control and striker plate⢠alignment.
Common failure modes are mechanical â¤breakage ofâ the⤠plasticâ keeper or spring fatigue, switchâ contact failure or corrosionand misalignment of the striker that prevents full actuation. Diagnostic âsymptoms include a unit that will not start or will stop mid-cycle,â persistent door/lock fault⢠messages on the controller, audible clicking without cycle initiationor theâ door popping âŁopen under load.â Technicians should perform a visual â¤inspection for cracked âplastic or bent mounting tabs, verify actuatorâ travel and striker âalignment,â and measure switch continuity while manually actuating⣠the latch with a multimeter; intermittent continuity or no⣠actuation â¤indicates the latch assembly or switch should be replaced rather⢠than attempting temporary fixes that leave a safety interlock compromised.
- Dishwasher won’t âstart: control shows door/lock fault â¤orâ no response – â˘check latch switch continuity and wiring â˘harness.
- Intermittent starts or stops: test⣠for intermittent continuity while cyclingâ the âlatch; inspect for corrosion on switch terminals.
- Door pops⣠open or leaks: inspect keeper,⣠spring tensionand striker â¤alignment for wear or deformation.
| Item | description |
|---|---|
| Door/Lock fault (displayed as a door or lock message) | Latch switch failed or⢠not fully actuating; verify mechanical travel⣠and switch continuity, then replace A00099902 if âfaulty. |
| Intermittent âŁstartâ or abort | Wornâ switch â˘contacts or loose harness connection; wiggle-test harness and measure for intermittent open/close under âŁactuation. |
| Door⢠opens under cycle | Broken âŁkeeper,â weak âspringor misaligned striker-replace latch and realign striker to restore retention âforce. |
Replacement âConsiderations and⤠Step-by-Step Installation Procedure⣠for the Door latch Assembly
The â¤A00099902 âFrigidaire Dishwasherâ Door Latch is a combined mechanical striker/actuator and microswitch assembly that securesâ the door and provides the closed/locked signal to the control board.The â˘latch âŁmust⣠reliably engage the striker â¤so the plunger⢠depresses the â˘internal switch; failures typically present asâ a door-locked error, âŁaâ dishwasher that won’t start,â or intermittent cycle interruptions. Verify compatibility by matching the⢠OEMâ part number and connector orientation to the dishwasher modeland inspect mating surfaces – a worn striker,â misaligned hingesorâ damaged inner doorâ panel can âcause correct⣠latch âoperation to â˘fail even⣠when âthe âA00099902 itself is serviceable. Such as, a technician replacing onyl the âlatch âon aâ misaligned door â˘will⢠often observeâ the âsame error codes âŁuntil the striker position and door spring tension are corrected.
- Confirm OEM part ânumber and harness pinout before installation.
- Inspect âstriker,⤠door hinge/spring alignment, âand inner âdoor panel for damage.
- Check mounting screw type and torque to avoid distortion of the latch housing.
- Verify microswitch continuity and connector seating during benchâ testing.
| Item | Description |
|---|---|
| Mounting hardware | M4 x 8â mm stainless screws (typical);â torque 3-4 N¡m |
| Connector | 2âpin frictionâ connector; verifyâ pin assignment against service schematic |
| Actuation travel | Approximately â4-6 mm plunger travel⢠for reliable switch closure |
| Diagnostics | check microswitch continuity when plunger âdepressed; confirm control board senses closed circuit |
Disconnect power â and remove the inner door panel to⤠access the âlatch assembly, supporting the door so hinges and springs remain in proper position. Unplug the âlatch connector and remove the mounting screws, âŁnoting the latch orientation and any shimsâ or spacerâ pieces to reuse. âInstall theâ A00099902 with the plunger aligned to the striker, hand-startâ screws and tighten âto the specified torque to avoid housing deformation; reconnect the wiring harness and reassemble the door. After installation, manually actuate the plunger to⣠confirm microswitch âŁcontinuity withâ a⢠multimeter and runâ a diagnosticâ or short test cycleâ to verify the controlâ board registers the door-closed/locked state; if the board does not see the signal despite correct⢠continuity, recheck harness continuity and striker â˘alignmentand adjust striker position incrementally until consistent âengagement is âŁachieved.
Q&A
What is the âA00099902 Frigidaire dishwasher door latch and which models does it fit?
The A00099902 is⤠an OEM door latch/strike assemblyâ used on many Frigidaire, âŁKenmore and â˘related-brand⣠dishwashers. It securesâ the âŁdoor closed and actuates the â˘door switch so the machine will run. Compatibility varies by model and serial number; always âverify fit by⢠checking the dishwasher model⣠number against an official parts lookup or the retailer’s⢠compatibility â˘list before purchasing.
What⤠are⣠common symptoms that the A00099902 latch isâ failing?
Common signs include the dishwasher⤠not starting, âstoppingâ mid-cycle, showing a⢠door-related⢠error âŁcode, not⤠lockingor the door not âstaying â¤closed. You may also hear the door actuator âclicking but the latch not engagingor see visible damageâ such as broken⣠plasticâ or a bent strike.
How do I test âŁthe door latch to determine if it needs replacement?
First, disconnectâ power to âthe dishwasher. Remove the inner door panel⣠to access⣠the latch.Inspect visually for broken parts. Use a⣠multimeter to test continuity across⢠the door âswitch terminals while⤠manually depressing the latchâ actuator;⢠a working switch⢠will⣠change stateâ (open/close). If the switch does not change or âthe actuator doesn’t physically move the switch,â the latch assembly is likely bad⤠and should be replaced.
Can⤠I repair âthe latch âŁor should I replace the A00099902 assembly?
Most failures â¤are dueâ to broken plastic housingsâ or worn switches; âthese parts are inexpensiveâ and sold as a complete assembly. Because of the small, molded plastic parts and integrated switches, replacement is usually recommended⣠over attempting a repair.
How do âŁI replace the A00099902 door latch – what tools and steps areâ needed?
Turn off power at the⤠breaker. Open the door âandâ remove âthe inner door panel (typically⣠several screws along â¤the perimeter). âRemove the mounting screws or clips securing the latch, disconnect the wiring harnessand install the new latch by reversingâ the steps: connect harness, secureâ screws, reattach inner panel, restore power,â and test. Tools typically needed are a Phillips screwdriver, nut driver (often 1/4″ or 5/16″)and needle-nose pliers. Allow about 15-45 âminutes depending on experience and model.
Will the dishwasher run if the door âlatch is only partially engaging?
Most modern dishwashers require the door latch to fully engage to âclose the internal door switch;⢠if it is indeed only partially engaging the control may prevent⣠operation âor stop mid-cycle.⢠Even if it runs, a partially engaged latch risks water leaks â˘and unsafe operation. Replace or⣠properly align⤠the latch before use.
Areâ there âŁadjustment or alignment tips to fix a misaligned latch without replacingâ it?
Check the âŁstriker alignment and the mounting screws â- sometimes loosening the latch screws, realigning the â¤striker so it lines up squarely with âthe latch, then⤠retightening will⤠fix engagement.â Also inspect the inner door gasket and hinges for sagging.If plastic⤠parts of the latch are cracked or⣠the switch is âŁintermittent, alignment won’t fix theâ problemâ andâ replacement is needed.
How much does the âA00099902 âlatch cost andâ is â¤there âanyâ warranty?
Retail priceâ for the OEM â˘A00099902⣠typically ranges from about $15â to $40⢠for the âpart â˘alone; installation by⢠a technician adds labour costs. Warranty âŁdepends on the seller: new genuine OEM âparts frequently enough carry a limited warranty âŁ(commonly 90 days to 1 â¤year)â – check the â˘seller or Frigidaire’s parts warranty terms.Keep your âreceipt and part packaging for warranty claims.
To â˘Wrap It Up
The⢠A00099902 Frigidaireâ dishwasher door latch is a small but critical component that ensures the appliance door closes securely, âmaintains an effective water-tight âsealand engages the safety interlock required for normal⢠wash âcycles. Proper function of the â˘latch⢠contributes directly to appliance performance by âallowing the dishwasher to âstart and⣠complete cycles reliably while preventing leaks and⢠reducing the risk of unintended opening⤠during operation.
Because latch failure can present as aâ range of issues-such âŁas a door that will⤠not stayâ closed, a dishwasher that does not start or register as âdoor open,â or⢠intermittent â¤leaks-accurate âŁdiagnosis is important before replacing â˘parts. Troubleshooting should include inspection of theâ latch mechanism, âstrike plate, door alignment, wiring and switchesand any visible signs of wearâ or damage. Confirming that the latch is theâ root cause prevents unneeded repairs âand ensures the most effective use of âtime and resources.
When replacement is required, using the correct A00099902 part and following manufacturer âinstallationâ guidelines or relying â˘on a qualified technician helps restore safe operation and reliable performance.Proper installation and âŁpost-repair testing verify that the â¤door closes,â sealsand latches as intended, helping to⢠maintain efficiency and reduce the likelihood of repeat service.Routine observation and timely attention to latch⢠issues support longâterm âappliance reliability âand user safety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
