316112005 Frigidaire Oven Range Anti Tip Bracket Kit is a mechanical safety anchoringā assembly designed to prevent a freestanding range or oven from tipping forward. The kit is typically aā£ small metal bracket or brackets with associated fasteners that secure ā¤the appliance chassis or ā¢rear footā to a fixedā¢ building element (floor, cabinet ā£toe-kickor ā¤wall stud). āAsā£ a basic structuralā component,it is indeed ā¢intended to carry shearā andā pullā¢ loads betweenā the appliance and surrounding structureā¢ rather than to support theā appliance’s operating weight.
inside the ā¤applianceā¤ systemā¤ the anti-tip bracket functions as a restraint device that limits forward rotation of theā range when the ādoor is opened or ā£when load is applied to the oven ādoor or range surface. It interfaces with the appliance’s rear frame or leveling leg assembly and with ābuilding substrates (wood āfloor, cabinetor masonry) viaā screws or anchors. Proper installation establishes a predictable load path from the ārange to the building structure, reducing moment and shear forces on gas and electrical connections and minimizing the risk of appliance displacement during normal use or when external forcesā¢ are applied.
In this article you will find a technical overview of the anti-tip kit’s function and common points of ā¤compatibility with frigidaire range models, typical failure symptoms to āwatch for (loose or missing fasteners, deformed bracket, range ārocking or excessive forward movement), diagnostic and troubleshooting guidance for determining whether the bracket or its anchorage has failedand practical replacement considerations such as selecting appropriate fasteners forā£ the substrate, verifying clearances and alignmentand confirming that the installation ā¢meets manufacturer and installationā¤ requirements.The focus is on providing technicians, engineersand appliance owners with the ātechnical context needed to assess, maintainand replace the anti-tip bracket safely and effectively.
Table of Contents
- Function and Mechanical Role of the Anti-Tipā Bracket in Oven Stability
- How the 316112005 frigidaire Oven Range Anti Tip Bracket Kit Integrates and Operates Within the Appliance Chassis
- Diagnosticā Indicators and Common Failure Symptoms of a Faulty Anti-Tip Bracketā¢ Assembly
- Replacement Considerations, Model Compatibilityandā¤ Step-by-Step ā¢Installation requirements
- Q&A
- Key Takeaways
Function and Mechanical Role of the āAnti-Tipā¢ Bracket in Oven Stability
The 316112005 Frigidaire Oven Range Anti Tip Bracket Kit functions as a positive mechanical restraint that limits forward rotation of aā freestanding oven when a moment is applied to the door or cook surface. Mechanically,the bracket is designed to be fixedā¢ to a structural element (wall stud or floor substructure) and to ā¤engage a dedicated rearā£ foot or engagement slot onā the range; when the oven doorā is opened and a load is applied,the tipping moment is transferred through theā£ rangeā chassis into the bracket and then into the building structure. In practical terms this means the ā£bracketā£ converts a bending/tipping load into a tensile/shear load ā¤on the fasteners and ā¢into bearing loads on the structure, preventing theā£ applianceā¢ from attaining the angular displacement that would cause ā£a tip-over hazard (for example, āa heavy pot placed on an openā door or a child climbing onā¢ the oven door).ā¢ Verify model compatibility before replacement or retrofit since engagement geometry and mounting hole locations varyā between range models and cabinet installations.
From a mechanical-design perspective,ā¤ the anti-tip bracket acts as a localized stop with aā¤ controlled engagement point; it does not permanently restrain the appliance ālongitudinally but limits ā¢rotation about the rear support. Proper performance depends on three conditions: correct bracket placement ārelative to the range rear foot, secure attachment to adequate substrate,ā and correct appliance levelingā¢ so the engagement point aligns under load. Routine āinspection should āconfirm ā¢fastener integrity, absence of deformation at the engagement surfacesand that the bracket remains fully engagedā¢ when the range is āpulled forward for cleaning. for installations on masonry or non-structural finishes, appropriate anchors or blocking must be usedā to reproduce the load āpath back to structure;ā£ the bracket mitigates tipping risk but does not substitute for proper installation, levelingor other restraining systems where local codes require ā¢additional measures.
- Key considerations: secure toā structural substrate, ā¢ensure engagement with rear foot/slot, verify alignment after leveling.
- Common inspection actions: check fastenersā¤ for ālooseness, inspect bracket and āengagement surfaces āfor wear, test engagement by gently applying forward load to the door.
- Compatibility note: confirm the bracket geometry matches range model and installation type beforeā reuse or replacement.
| Item | Description |
|---|---|
| Material | Stamped/formed steel designed to resist shear and tensile loads from tipping moments |
| Mounting | Wallā£ stud or floor substructure anchor point; requiresā¢ adequate substrate for load transfer |
| Engagement point | Rear leveling foot or dedicated slotā on oven chassis that bears against the bracket |
| Primary function | Limit forward rotation of the range to prevent tip-over under door āorā£ cooktopā£ loads |
How āthe 316112005 Frigidaire Oven Range Anti Tip Bracket Kit Integrates and operates Within the āAppliance Chassis
The 316112005 Frigidaire Oven Rangeā Antiā£ Tip Bracket Kit integratesā£ into theā¤ appliance chassis by forming ā¤a rigid mechanical stop between ā¤the ovenā rear or leveling leg andā£ the cabinet or floor substrate. The bracket is a stamped and ā¤bent ā¢steel component that fastens to a structural elementā£ (toe-kick, subflooror wall stud) and captures a mating tab or heel ā¤on the range chassis. Under lateral or tipping loads-such as,the oven door loaded with cookware or an occupant pulling ā¢on anā¤ open ā¢door-the ā¢bracket transfers overturning moment into shear and bearing ā¢loads on theā fasteners and building structure instead of allowing theā¢ range to rotate about its front edge. The design allows a smallā¤ amount of axialā clearance so ā£the range can beā moved for service while still providing a positive stop in the installed āposition.
In operation the anti-tip bracket behavesā as a mechanical stop that limits rotation rather thanā¤ as a load-bearing support for normal vertical loads; ā¢correct installation aligns the bracket capture point with the rear chassis engagement feature and uses appropriate fasteners for the substrate. ā£Technicians should adjust the range height and secure the bracket so engagement occurs whenā the range is pushed into its final ālocation; improper alignment can leave a āgap that defeats the stop orā£ cause constant preloading that could deform the bracket overā£ time. Practical examples include preventing forward overturn when heavy cookware is placed on āan open door and preventing āan āoccupant from tipping the appliance by steady pressure at the ā£handle. Routine inspection for secure fasteners, corrosionand deformation is recommended after moving theā appliance or if the range is subject to unusuallyā high lateral impacts.
- Typical features: rigid steel stop, adjustable engagement via leveling legs, substrate-specific fastener options.
- Behavior under load: converts overturning moment to shear/bearingā on fasteners and ā¢structure.
- Maintenance: verify alignment and fastener torque after installation āor service.
| Item | Description |
|---|---|
| Mounting āinterface | Bracket fastens to ā£toe-kick, flooror stud; engages rear heel/tab on range chassis. |
| Primaryā function | Limit rotation/overturning by transferring āmoment to building structure. |
| Material/finish | Stamped steel with ācorrosion-resistant ā¢plating; replace if bent or corroded. |
| Compatibility | Designed for āFrigidaire ranges that use a rear-leg ā¤or heel engagement point; verify fit against chassis detail before installation. |
Diagnostic Indicators ā£and Common Failure Symptoms of a Faulty Anti-Tip Bracket Assembly
The 316112005 Frigidaire ā£Oven Range anti Tip Bracket Kit āis a stamped steel mounting assembly designed to engage the range’s rear antiātip tab andā transfer ā¤overturning loads into the floor or wallā£ fasteners. In normal operation the bracket prevents theā£ appliance from rotating forward when weight is applied to an open oven door or heavy cookware is placed on the door; it does this by creatingā a fixed pointā£ ofā£ contact behind the appliance āthat limits forward travel of the range chassis. Verify compatibility by matching the range model number and measuring rear leg/clearance dimensions: the bracketā¤ must align with the factory antiātip tab and be ā¤fastened into suitable substrate (concrete, floor joistor blocking) rather than thin flooring alone.
Typical failure modes are mechanical: loose āor missing fasteners, bent or deformed ā£bracket geometry, elongation ofā¢ screw holes, ā£or ā¢pullāout of the floor anchor. The practical diagnostic approach combines a visual inspection with a ācontrolled load test:ā with the āoven door partially open, apply a measured forward force at the door or top edgeā and ā¢observe ā¢any rotation or forward travel; more than ā¤minimal perceptible movement or audible creaks indicate compromised retention. Examples include a range that rocks forward when a pot is placed onā the open door,a bracket that bends after a collision during installation,or fasteners that back out over time on soft subfloors.Common corrective actions areā retightening to specified torque, replacing ā¢damaged ābracketsand installing heavier anchors or blocking where the substrate is insufficient.
- Excessive forward travelā orā rocking during door āoperation – check fastener tightness and anchor engagement.
- Visible bend, crackor deformation in theā bracket ā- replace the bracket and inspect for impactā¤ damage.
- Elongated screw holes or stripped threads – reinstall with properly sized fasteners or use reinforcement.
- floorā anchor pullāout or insecure substrate – install blocking or use mechanical ā¢anchors rated for the load.
| Item | Description |
|---|---|
| Excessive travel | Indicates loose/missing fasteners or incorrect alignment; perform load test and tightenā or remount into structural member. |
| Deformed bracket | Result of impact or overload; replace bracket and check range for displacedā¤ chassis components. |
| Anchor pullāout | Substrate failure (softā flooring or no blocking); retrofit blocking or use throughābolts into ā¤joist or concrete anchor. |
Replacement Considerations, ā£Model compatibilityand Step-by-Stepā Installation āRequirements
316112005 Frigidaire Oven Rangeā¤ Anti Tip Bracket Kit is a mechanicalā restraint that prevents a freestanding range from tipping forward when a load (such as, a heavy oven ādoor or a child climbing) is ā¤applied toā the front.ā The bracket typically anchors to the floor or wall and engages a rear leg or a dedicated ā¤engagement tab on the appliance; a proper ā¢installation transfers tipping loads into the building structure ārather than the cabinet or range chassis. Replace the bracketā¢ if the metal is ābent, anchors āare strippedor fasteners are missing. Confirm compatibility by measuring the distance ā¢from the range rear face to the āmounting point and inspecting ā¤the rear-leg geometry – some Frigidaire models use a rear-leg hook while others use a flat engagement tab, āandā aftermarket āor worldwide brackets may not seat correctly without matching those details ā¤or adding blocking for secure anchorage.
Installation requires attention to mounting substrate, fastener selectionand appliance leveling so the bracket engages reliably under both static āand dynamic loads. Disconnect electrical and gas connections āperā£ service procedures and slide the range forward to access the rear attachment area. For wood or plywood subfloors, use lag screws into ā£blocking or āfloor joists; for concrete or masonry, use appropriate masonry anchors. āAfter anchoring, adjust ā¢the range leveling legs so the rear leg or tab fully inserts into the bracket and verify engagement by gently pulling the range forward; the bracketā£ should prevent forward rotation without excessive deformation. Document the fasteners and anchor ātype used for ā¢future service and retest engagement after any subsequent repositioning of the appliance.
- Confirm rear-leg/tabā geometry and measure mounting distances before ordering or installing a replacement bracket.
- Use manufacturer-supplied hardware when available; otherwiseā select lag screws for woodā blocking or masonry anchors for concrete.
- Disconnect power/gas,ā¢ slide range forward, ā¤mount bracket securely, levelā£ range so engagementā occurs, thenā verify byā pulling range forward and checking stability.
| Item | Description |
|---|---|
| Mounting substrate | Wood blocking/joist: āuse lag screws; concrete: use masonry anchors rated for shear and pull-out. |
Q&A
What is the 316112005 Frigidaire Oven Range Anti Tip Bracket Kit?
The 316112005 kit is an antiātip safety bracket designed for many Frigidaire freestanding āand slideāin ranges. It secures the rear of the range toā the floor or wall so the appliance cannot ā¢tip ā¢forward if weight is placed on an open oven door.
Wich Frigidaire models will this kit work with?
It is intendedā for a wide range of Frigidaire freestanding and slideāin ranges, but not for builtāin wall ovens or cooktops. Compatibility can ā¢vary by modelā¤ year and configuration, so confirm fit by checking yourā¤ range model number against Frigidaire parts listings or the appliance owner’s manual before purchasing.
Is ā¢installingā the antiātip bracket required?
Yes. ā£Frigidaire ā¤and moast building codes require an antiātip deviceā£ on āfreestanding āand slideāin ranges because it prevents tipāover āinjuries. āYou should install the bracketā¤ before using the range and replace it if it āis missing or damaged.
What parts are included in the 316112005 kit?
The kit generallyā¢ includes a heavy steel antiātip bracket and theā¤ recommended mounting hardware (screws/anchors) plus installation instructions. Exact contents canā¢ vary; inspect the kit against the included parts list before beginning installation and obtain the correct āanchors for your floor or wall type if not provided.
How do I install the antiātip bracket?
Basic steps: 1) Disconnect electrical power and shut off gasā if applicable. 2) āPull the ārange out from the wall. 3) Position the bracket per the instructions (to the floor or wall stud) and mark mounting ā¢points. 4) Use appropriate fasteners for ā£your substrate (wood screws into joist or stud,masonry anchors for concrete/tile) and secure the bracket. 5) Slide theā range back so the ā¢leveling leg or rear flange engages the bracket and adjust leveling legs to ā¢lock it in place. 6) Test by gently pulling the front of the range-if installed correctly it should not tip. Useā correct tools (drill,ā screwdrivers, wrench, level) and follow the manufacturer instructions exactly.
What special considerations are there for tile, concrete or raised subfloors?
Use masonry anchors and aā hammer drill for concrete or tile; drill through the tile carefully using a carbide bit and āanchor into the subfloor or concrete. For thin floors or suspended subfloors, locate solid ā£backing or ājoists to secure the bracket. If you’re unsure, use a professional installer-improper anchors can fail and ādefeat the antiātip protection.
How can I tell if the antiātip ābracket is already installed?
Pull āthe range away from theā¤ wall and lookā¢ for aā metal bracket attached to the floor orā wall behind the appliance. Youā¢ may also see a notch āor slot onā the rear leveling leg that hooks into the bracket.Carefully attempt āto tilt the front of the range āupward a few inches (with someoneā¢ holding the back) – if it ā¢doesn’t tip forward and is held by the bracket, it’s installed. Always be cautious andā disconnect power/gas before moving the appliance.
Can I remove the bracket to move the range and then reinstallā it?
Yes. Beforeā moving the range, disconnect power and gas, pull the range forward and lift the front to disengage the rearā¢ leveling leg from the bracketor unfasten the bracket if necessary. Move the range, then reinstall the bracket at the new location and resecure the range beforeā£ returning it to service. Never operate ā£the range withoutā an antiātip device properly installed.
Keyā¤ Takeaways
The 316112005 Frigidaire oven range anti-tip bracket kit serves a focused but ā¤critical safety function: securing the range to prevent tipping during normal use, which reduces the risk of burns, injuriesand property damage. As a purpose-built component, it helpsā¢ ensure the appliance remains stable whenā¤ doors are opened, when heavy cookware is placed on the oven door, ā£orā¢ when the unit is moved, contributing to a safer kitchen environment.
Proper diagnosis and timely replacement of the anti-tip bracket areā£ essential when signs of wear, damageor improperā installation areā¢ present. Confirming that the bracket is āpresent, correctly installedand compatible with the particular range model ā¤avoids false assumptions about appliance ā¤stability; when in doubt,ā¢ follow the manufacturer’sā¢ guidanceā¤ or consult ā¤a qualifiedā£ service technician to verify the condition and fitā of the part. using the correctā replacement part and installationā method preserves āthe intended safety performanceā of the appliance.
Maintaining a correctly installed anti-tip bracket is a simple but vital aspect of ā£overall appliance care and household safety. Routine inspection, prompt attention to any issuesand adherence to manufacturerā¢ recommendations help sustain the safeā operation and longevity of āthe ārange without altering normal use.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
