241816602 Frigidaire Refrigerator Motor-AUGER is a geared auger motor assembly used in Frigidaire âice-dispensing systems. It is a low-speed, high-torque motor and gearbox that couples âdirectly tooâ the auger shaft⢠inside the ice âbin to rotate anâ internal spiral (auger) that â˘moves⢠ice âfrom the storage âbin into the dispenser chute. Theâ assembly typically includes the motor, reductionâ gearing, mounting interface and the auger drive shaft⣠or âhuband is âŁdesigned to operate â˘as a modular service part âwithin the refrigerator’s â˘dispensing âsubsystem.
Within the appliance the auger motorâ interfaces mechanically with theâ ice bin and auger⤠flighting â˘and electrically with the refrigerator control board, door/dispense switches⣠and safety interlocks. whenâ the user âactivates the dispenser⣠or the control board â¤initiates a dispense cycle,the board applies power âto the motorâ through theâ wiring harness âand â˘any door or actuator switches; the gearbox translates motor rotation into the torque needed to advance ice. Proper âoperation depends âon correct⣠mounting âalignment, unobstructed auger flighting, intact plastic or âmetal⢠gear teeth and reliable electrical connections;⢠failures can arise from stripped gears, seized shafts, electrical faultsor⤠obstructions in the ice path.
In this article readers will find a technical overviewâ of the motor-auger’s âfunction and typical installation locations, guidance on checking compatibility by part number and model â˘family, common failure symptoms to⢠recognizeâ (for âexample no dispense, motor hum âŁwith no rotation,⣠excessive noise or intermittent operation), step-by-step troubleshooting checks to⣠isolate electricalâ versus mechanical faultsand practical replacement considerations âsuch as required disassembly â¤sequence, connector and mounting detailsand points to verify after installation. âThe⢠content â˘isâ aimed at technicians, engineersâ and appliance owners who need⤠clear, service-oriented details for diagnosis andâ safe replacement of the 241816602 motor-auger assembly.
Table of Contents
- Function and â¤Role â¤of the Auger Motor inâ Frigidaire Refrigerator Ice⤠Dispensing Systems
- How âthe 241816602 Frigidaire Refrigerator Motor-AUGER â¤Worksâ Inside the Appliance
- Common Failure Symptoms and â˘Diagnostic Indicators of Auger motor⢠Faults
- Compatibility, Replacement Considerationsand model Support for Auger âMotor assemblies
- Q&A
- Future Outlook
Function and role⣠of the Auger Motor in Frigidaire Refrigerator âIce Dispensing âSystems
Theâ 241816602 frigidaire Refrigerator Motor-AUGER is⣠the geared driveâ that turns theâ helical auger inside the ice bin to move measured portions of ice from the storage âŁcavity âinto the dispenser chute. In operation the control board⣠supplies â¤power to⢠the motor â˘for a defined intervaland the⣠motor’s integrated⢠gearbox âconverts that â¤electrical input into slow, high-torque rotation necessary to overcome ice packing and friction. When âfunctioning correctly the motor produces a⣠steady rotational torque âand predictable run-time; â˘mechanical symptomsâ such as grinding, intermittent rotationor increased current draw typically indicate a âŁjammed âŁauger, degraded gearboxor electrical âfault in⣠the motor windings âor connector⢠circuit rather than an issue with the â¤dispenser door âŁor microâ switches alone.
- audible hum with âŁno â¤ice output – motor âenergized but auger mechanically seized or slipped.
- intermittent dispense – worn brushes, loose â˘connectoror intermittent control signal.
- Slow⤠or weak rotation – reduced torque from⤠gearbox wear or⣠partial electrical failure.
- normal operation – short, timed rotation delivering consistent âice volume per cycle.
For compatibility and service, the motor isâ a â¤drop-in replacement for models that⤠list 241816602 in â¤the parts listing and⢠uses the same mechanical mounting and â˘connector pinout as⤠the factory unit; technicians should verify connector typeâ and â˘shaft coupling before installation. Practical⣠troubleshooting steps include clearing â¤the⣠ice bin of bridging, â˘manually rotating the augerâ to âŁcheck for free movement, verifying âcontrol-board driveâ voltage at the â¤motor connectorâ during a dispense command, âand measuringâ coil continuity⢠and insulation⢠resistance âwhen the motor is⤠removed. Replacing the motorâ is appropriate⢠when mechanical resistance persists after⤠clearing jams or when electrical â¤tests show open â¤windings or excessive current draw âŁunder no-load conditions.
| Item | Description |
|---|---|
| Function | Provide geared, high-torque rotation to the auger screw for controlled ice dispensing |
| Electrical interface | Multi-pin â˘connector to refrigerator âcontrol board; driven by timed dispense command |
| Mounting | Direct-fit into auger housing with shaftâ coupling-verify â¤model âcompatibility |
| Common failure modes | Auger seizure, gearbox⣠wear, connector âŁcorrosion, â¤open/shorted windings |
How â˘the 241816602 Frigidaire Refrigerator Motor-AUGER Works Inside the appliance
The⤠241816602 Frigidaire Refrigerator Motor-AUGER is a â¤low-speed, high-torque gearmotor that drives the augerâ inside the ice bin to move ice from the â˘ice⢠maker to the â¤dispenser chute. It is mechanicallyâ coupled â¤to anâ auger shaft viaâ a gear⢠train or worm gear to convert motor rpm into â˘the torque needed to â¤move packed ice. âThe motor receives a timed command from the dispenser control âor ice-maker board âŁand typically runs only forâ theâ durationâ of a dispense cycle; its dutyâ cycle, shaft geometry, mounting flangeand electrical connectorâ must match theâ appliance design for reliable operation.
- Typical failure modes: stalling under load (ice jam), worn gears, electrical open/short in windingsor intermittent operation due â˘to connector/circuit-board⢠faults.
- Operational âbehavior: slow uni-directional rotation with high stall torque; rapid starts and stops⢠during dispensing cycles.
- Replacement considerations: match mounting âpattern, shaft diameter and⢠length, connector pinoutand rotational direction.
For troubleshooting,verify âŁthat the⢠control âboard is supplying the âexpected drive signal at the motor connector while a⢠dispense is requested⣠and⢠observe whether the motor shaft rotates freely by hand⢠when âŁpower is removed.⢠If the motor hums but does not turn, inspect the auger â˘for âmechanical obstruction orâ stripped plastic⤠gears;⣠if âŁthere is no drive signal,â trace the dispenser interlock switches and⢠control board.When replacing the unit,⤠use the OEMâ part number or an exact â¤dimensional âequivalent â˘to ensure correct mechanical fit andâ electrical⤠compatibility-misaligned shafts⢠or incorrect gear ratios will cause⢠poor dispensing performance and accelerated wear.
| Item | Description |
|---|---|
| Function | Drive auger to deliver ice⢠from bin to chute |
| Key checks | Connector voltage during â¤dispense, free⢠rotation, visible âgear wear |
common failure Symptoms and Diagnostic Indicators of Auger Motor faults
241816602 Frigidaire Refrigerator Motor-AUGER is the electromechanical â¤actuator that rotates the auger shaft in Frigidaire â˘ice-dispensing assemblies; its role is to âŁdeliverâ controlled rotational torque to the auger flighting so measured portions of ice â˘are advanced from the bin to âthe dispenser. The motor⤠is normally mounted with a smallâ reduction gearbox and specific connector pinout, so compatibility should be confirmed against the refrigerator’s â˘parts list or service manual before âinstallation. Fault âtypes fall into two broad categories: mechanical (jams, stripped couplings, gearbox wear) âthat allow theâ motor to energize but not turnand electrical/control faults (open windings, shortingor missing â¤drive voltage) âŁthat produce âno motion orâ intermittent operation.
- Humming â˘without⤠rotation -â classic sign of a âmechanical âjam, damaged â¤couplingor excessively loadedâ rotor causing⣠stall.
- Intermittent operation or no âresponse – often electrical:â damaged wiring, corroded connector pinsor â¤absent control-board output.
- Grinding or clunking⢠noises during rotation – indicates worn â˘gearbox teeth,foreignâ debris,orâ misaligned auger shaft.
- Motor runs but ice not dispensed – coupling slip or⤠damagedâ auger⣠flighting preventing effective transport.
- High current âdraw or breaker⢠trips – suggests winding faults, internal shortor repeated stall condition.
Diagnostic procedure should âcombine electrical measurements and mechanical inspection: verify the control board is issuing âdrive⤠voltage at the âmotor connector while the dispenser â¤is commanded,measure motor winding resistance and continuity to⣠ground with an ohmmeter,and record current â¤draw with an â¤ammeter to detect stalls or shorts; always⤠compare readings to the⤠appliance service specification. Mechanically, remove the auger to confirm free rotation, inspect the coupling and gearbox⢠for⤠stripped teeth or debrisandâ manually rotate the auger shaft to checkâ for binding; a common âexample is a motor that hums and registers high current but resumes â˘normal function after freeing a⣠jammed auger or replacing a fractured coupling. Replace the motor only after excluding harness and âcontrol-board⤠faults and⢠ensuring the replacement 241816602 unit⤠matches the original’s connector, mountingand gear âorientation.
| Item | Description |
|---|---|
| Humming, âno ârotation | Check auger for jam, inspect coupling â˘andâ gearbox; measureâ current âdraw. |
| No drive voltage | Test control-board output âand wiring harness continuity âat the motor connector. |
Compatibility, Replacement Considerationsand Model Support for Auger Motor Assemblies
The âŁauger motor is the rotary⢠drive that turns the spiral auger inside the âice bin to⣠feed ice through the dispenser. The 241816602 Frigidaire âŁRefrigerator Motor-AUGER couples a motor, gearbox,⣠and â¤splined output to provide â˘short, high-torqueâ rotations programmed by theâ dispenser control. Inâ normal âŁoperationâ the motor produces short on/off bursts⤠rather thanâ continuous rotation; this reduces âice jamming and limits stall stress on the gearbox. common failure â˘modes include stripped splines,worn worm-gear teeth,seized bearings (humming with no shaft rotation),and electrical open circuits in the⤠windings,all of which produce â¤observable symptoms such asâ intermittent dispensing,noise during operation,or⤠complete non-rotation of⣠theâ auger.
- Verify OEM part number and plugâ style before ordering or installing.
- Compare shaft spline count/diameter and mounting hole â¤pattern to ensure mechanical âfit.
- Check wiring harness âŁpinout and control-board drive method (current-limited burst⢠vs. continuous) for â¤electrical compatibility.
- Inspectâ gearbox for plastic gear wear and confirm replacement includesâ any âŁrequired retaining clips or seals.
- Test⣠motor winding continuity and resistance before âŁbench installation to ârule out open/short faults.
When⢠replacing the motorâ assembly, match â¤the fridge model and service manual cross-reference rather than relying⣠on physical âŁappearance â˘alone; âseveral Frigidaire series reuse similar housings with different electrical connectorsâ or gear âŁratios. During⣠install, clear any ice bridges,⣠align the â¤auger spline fully into the gearboxand verify that the dispenser control⤠still implements theâ expected pulse duration and stall-detection behavior-mismatched control logic can cause âpremature⤠motor wear âor false âjam faults. â˘For technical âŁreference, confirm part compatibilityâ by comparing the refrigerator model tag and⢠the âOEM parts list;⢠if uncertain, measure connector type, mounting geometryand spline specifications and consult the service sheet for torque, â˘wire color codingand any requiredâ calibration after replacement.
| item | Description |
|---|---|
| Typical interfaces | Splinedâ output â˘shaft, multi-pin wiring harness, screw or⤠clipâ mounting-verify exact dimensions |
| Failure â˘indicators | humming âwith no â¤rotation, stripped spline,â intermittent⢠operation, visible⣠gear teeth⤠wear |
| Service checks | measure winding resistance, inspect âgears and bearings, confirm connector pinout against â¤service â¤manual |
Q&A
What is the 241816602⣠Frigidaire Refrigerator Motor-AUGER and what âdoes it do?
The 241816602 auger âmotor is the small drive âŁmotor used in âFrigidaire refrigerators with through-the-door ice dispensers.â It turns the auger (the spiral paddle) inside theâ iceâ chute or bin to move ice from the storage bin to the â¤dispenser⣠chute when you press the âdispenser lever.
How â˘do I âŁknow if the âauger motor is failing⤠or needs replacement?
Common symptoms of a failing⤠auger motor include: the motor âhumsâ but the â˘auger does not turn,no response when you press⤠theâ dispenserâ lever,intermittent operation,grinding orâ strangeâ noises from the ice âbin,and âice not dispensing or dispensing irregular⣠amounts. Before replacing⣠the motor, check âfor ice jams, stripped auger gearsand dispenser switch or wiring faults.
How âdo I safely test âthe auger motor before replacing it?
Always unplug the refrigerator before accessing â¤components. Remove the â¤ice bin and access the motor per your model’s âservice instructions. Use a multimeter to check⢠for continuity across the motor terminals-no continuity often indicatesâ an open⤠winding. You â¤can also check for proper voltage at the motor connector while operating the dispenser (with theâ fridge plugged in â˘and someone actuatingâ the dispenser). If voltage is present but the motorâ doesâ not turn, the â¤motor âis highly likely bad â˘or mechanically jammed. Refer to â˘the refrigerator’s⤠wiring âdiagram for the expected control voltage.
Can⤠I⤠free a jammed auger or â¤do I need to replace âthe⤠motor/auger assembly?
Small ice jams can sometimes be âcleared by â˘removing the ice bin, thawing the jammed ice or gently levering⤠the âauger free (power off). However, if gears âare stripped,⢠the motor shaft is seized, âor âthe motor hums without turning, â˘the motor or the combined motor/auger/gear âŁassembly should beâ replaced. Do not force a seized motor while powered-this can burn out the motor.
What is involved in âreplacing the 241816602 auger motor?
Replacement typically involves unplugging the refrigerator, âremoving the ice bin and any âŁtrimâ panels âto access the â˘motor, disconnecting the wiring harness, removing mounting screws,⣠and swapping the old âŁmotor for the new⣠unit. Reassembly is the reverse. Always follow your refrigerator’s service manualâ for model-specific â˘access steps âand âtorque â˘guidance.â If you’re âŁnot comfortable working⤠on appliance electrics and âmechanical parts, hire a⤠qualified âŁtechnician.
Is 241816602 anâ OEM Frigidaire part⤠and âhow do I ensure compatibility?
Part 241816602 is listed â¤as a Frigidaire OEM auger motor part number. To ensure compatibility, âconfirmâ your refrigerator model number (usually on a tag inside⤠theâ fresh food compartment or on the door jamb) and cross-check with Frigidaire parts lookup or an â¤authorized parts dealer. Do ânot rely solely on appearance-verify fit and electrical â˘connector compatibilityâ for your âspecific⤠model.
Any⢠tips to prevent premature failure ofâ the auger motor?
Preventive â¤tips: avoid⤠jammingâ the dispenser with oversized or clumped ice, periodically break up large ice clumps in the bin, keep the iceâ bin âŁand chute âŁfree ofâ obstructions,⢠check door seals so the ice bin doesn’t partially freeze upand use âthe ice maker/dispenser according â˘to the manufacturer’s âguidelines. âIf the⢠dispenser is used very âfrequently, consider inspecting the âauger and motorâ periodically for wear and unusual noise.
Future Outlook
The 241816602â Frigidaire Refrigerator Motor-AUGER serves as the â¤driving component for the ice⤠auger assembly, âtranslatingâ motor torque into the â˘controlled movement of ice within theâ bin and⤠toward âthe dispenser. Its â¤reliable operation⣠is essential â¤to âŁconsistent ice delivery, minimizing jams and excessive wear on related components,⤠and maintaining overall âuser convenience and appliance performance.
As⣠symptoms of auger-related faults canâ overlap with other âdispenser âŁor ice-maker issues, â¤accurate diagnosis is⤠crucial before replacement. When the motor shows signs of â¤failure or intermittent operation, following manufacturer guidance and using correct replacement parts helps restore proper functionâ and prevent â¤further damage.For most users,â consulting a trained service technicianâ or authorized service resources ensures the repair is performed safely and â˘maintains appliance reliability over time.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
