W10339326 Whirlpool âWasher Water Level⣠Switch is a âpressure-actuated control commonly used âin Whirlpool residential washing â˘machines to â˘monitor and regulate the machine’s âwater âlevel.As a mechanical/electrical component,â the switchâ converts air pressure from the washerâ tub (via a small vacuum hose) into an â¤electrical signal that the washer’s control system usesâ to start âŁand stop filling cycles and âto verify water levels during program steps.
Inside the âŁappliance, the water level switch âinterfaces directlyâ with the tub via a pressure/vacuum âhose and communicates with â˘the âmain âŁcontrol board or timer⣠through electrical terminals. It works⤠in concert with the âwaterâ inlet⤠valve to terminateâ filling⤠at the correct leveland its â¤state can influence cycle advancement, drain sequences and safety⣠interlocks. âThe internal element typically consistsâ of a diaphragm or sensing⢠chamber and one orâ more âmicroswitch contacts; changesâ in â˘airâ pressure caused by rising or falling âŁwater deflect⤠the⤠diaphragm and⢠change contact âstates to signal the control electronics.
In âthis article⤠readers⣠will learn⣠how the⢠W10339326⢠functions, which washer models and configurationsâ it is commonly compatible âŁwithand the typicalâ symptoms that indicate⤠switch or pressure-system failure (examples include persistent overfilling, underfilling, continuousâ filling, âŁor failure to advance âŁcycles). The article will âalso cover practical troubleshooting steps-inspection of⣠the pressure hoseâ for⤠kinks,â blockages or â¤leaks, electrical continuity âchecksand functional⣠testing by âapplying controlled pressure-and âŁoutline replacement considerations such as âŁverifying part compatibility,â correct âhose routing andâ secure âelectrical connections⣠to ensure reliable operation after âservice.
Table âof Contents
- Function and Role of the Water⣠Level Switch in Whirlpool washers
- How the W10339326 Whirlpool Washer Water Level Switchâ Operates: Internal Mechanisms and Electrical Interfaces
- Common âFailure âŁSymptoms⣠and Diagnostic Tests â˘for Pressure-Sensor⢠and Control-Circuit Faults
- Compatibility, â˘Replacement âConsiderationsand Installation Procedure for the W10339326
- Q&A
- In Conclusion
Function and Role of the Water Level Switch âin Whirlpool Washers
The W10339326 Whirlpool washer Water Level Switch is a⢠pressure-actuated electrical â¤switch that provides the washer â¤control board with discrete â¤water-level information. A small rubber âhose â¤connects âthe tub â¤to the switch; â¤rising âwater compresses the air column âin the hose and deflects an internal diaphragm or piston, âŁmechanically moving one or moreâ sets of electrical contacts.â Those contacts complete âor âbreak⣠circuits to theâ fill valve,motor control and control logic at predeterminedâ pressure âŁthresholds so the machine can stop filling,proceed with agitation,or⣠advance âŁto drainâ and spin âstages.
When diagnosing âor replacing thisâ component,â verify mechanical âand electricalâ compatibility: âthe âcorrect harness connector, mounting orientationand pressure-port⢠size must⣠match the original to reproduce the⣠intended⢠actuation âpoints and â˘contact routing. Typical failure modes include âŁa blocked or split pressure hose, âaâ degraded diaphragm that fails toâ holdâ pressureor burned/oxidized contacts that change switching behaviour.⣠Technicians commonly bench-test the âswitch⣠by applyingâ controlled vacuum toâ the pressureâ port while measuring⤠continuity across âthe⣠terminals to confirm contact switching and by inspecting the pressure â˘hose âand fittings âfor leaks.
- Symptoms of⣠a faulty switch: overfill or underfill,â washer pauses without advancing cyclesor continuous filling/draining.
- Swift bench test:â apply suction to the pressure portâ and observe contact continuity withâ a multimeterâ toâ verify switching thresholds.
- Replacement checklist: â˘confirm⢠connectorâ type, mounting tabsand pressure-tube diameter match the âoriginal to avoid incorrect actuation.
| Item | Description |
|---|---|
| Sensing method | Air-pressure âinput from tub â¤via hose;â diaphragm/piston actuates switch contacts. |
How â˘the â¤W10339326 Whirlpool Washer Water level⤠Switch Operates: Internal⢠Mechanisms and Electrical⢠Interfaces
Theâ W10339326 Whirlpool âŁWasher âWater â¤Level Switch operates as a pressure-sensing, diaphragm-actuatedâ multi-contactâ switchâ that converts â˘tub water column pressure⢠into discrete âŁelectrical signals for the washer control board. Air pressure from a small rubber hose attached to âŁthe tub pushes⤠on an internal âdiaphragm; that⣠movement âdrives a cam âor wafer⢠assembly which opens and closes several contacts âat predetermined pressure levels. The switch does not âprovide an⣠analog voltage output but⤠rather â¤changes contact states⤠(common, â¤normally âclosed, normally open) as⢠the âŁwater rises,â allowing the control electronics to select fill, soakand spin âtransitions. âŁproper mechanical mounting⢠andâ matching the⢠harness âconnectorâ and pressure â¤nipple orientation â¤are ânecessaryâ forâ compatible operation-an â˘or âelse correct-looking⣠replacement can âŁreport incorrect âlevels ifâ the port orientation orâ pinout differs âŁfrom the original assembly.
Electrically the device typically⤠presents a common terminal⣠and⢠two or more switched âoutputs thatâ toggle at different pressure thresholds; the control board âsenses âtheseâ discrete states âŁtoâ decide when toâ stop âfilling or to⣠start draining. âTypical fieldâ diagnostics includeâ visually checking the vacuumâ hose for⢠kinks â˘or leaks, applying âa⤠controlled pressure to the inlet while⢠measuring continuity across âterminals⤠with an âohmmeterand verifying that the board sees the â˘expected logic changes as contacts actuate. Common failure âsymptoms⣠include overfilling,continuous fill,or â˘failure to detect a full tub; when replacing the component,confirm⣠the W10339326⢠part matches the washer’s âconnector⢠type â¤and⤠mounting footprint â˘and inspect the â¤air line and connector for corrosion or damage⣠to avoid misleading readings.
- Features: diaphragm-actuated,⢠multi-contactâ switching, molded âinlet nipple and electricalâ connector
- Common symptoms âof failure: overfill, underfill, continuous drain pump operation, erratic cycle changes
- Practical checks:â inspect air tube,⣠performâ continuity tests while applyingâ pressure, verifyâ connector pinout
| Item | Description |
|---|---|
| Switch type | Diaphragm with cam/wafer multi-contact switch âŁ(discrete contact outputs) |
| Connector | Molded âmulti-pin harness; pin âcount⤠and arrangement âmust âmatch washer model |
| Pressure input | Small vacuum hose from tub; orientation andâ seal integrity affectâ accuracy |
| Typical failure â¤modes | Leaky⤠air⣠hose, âclogged port, âworn diaphragm, â˘intermittent contacts |
Common⣠Failure Symptoms â¤and⣠Diagnostic Tests for Pressure-Sensorâ and Control-Circuit Faults
The⤠W10339326â Whirlpool âWasher Water Level Switch is a pressure-actuated switch assembly that converts air pressure from the washer’s drain/tub air line â¤into discreteâ electrical signals for the control board. Internally â˘it uses a small diaphragm and spring-set contact âŁstack so thatâ rising water level â(and therefore âincreasing air pressure in the hose) closes or opens specific terminals to indicate low, midand full âlevels. As a⤠direct-replacement mechanical pressure switch, âit â˘is⣠compatible âwith â¤Whirlpool platforms that use⢠a pressure âhose and âswitch rather thanâ anâ electronic⣠capacitive sensor; technicians⢠should verify terminal layout and mounting orientationâ when âconfirming fitment to a âgiven model.
Typical failure modes are either âŁmechanical (diaphragm rupture,internal corrosion,orâ stuck contacts) or â˘installation issues â¤(blocked,collapsed,or disconnected pressure âhose). Common diagnostics⤠include a visual inspection of the hose and â˘switch for moisture or debris,⣠a continuity check across the switch⣠terminals âwhile applying âŁpressure by âmouthâ or a smallâ hand vacuum pumpand verifying correctâ reference voltage from âŁthe control harness to rule out controllerâ faults. Disconnect power before probing⤠connectors; if the switch does not âchange âŁstate under applied vacuumâ while the hose⤠is â˘clear and harness voltage âis⢠present, the W10339326⣠should be⢠replaced toâ restore reliable level sensing.
- Symptom:⢠Overfill or continuous fill -â inspect hose for blockageâ and check switch continuity while â˘applying suction.
- Symptom:â No fill or does not âadvance – verify âcontrol voltage⢠at harness, âthen test switch actuationâ with vacuumâ pump.
- Symptom: Intermittent fills/false level readings – look for â¤moisture or âcorroded terminals inside âthe switch.
| Item | Description |
|---|---|
| Continuity â˘test | With power disconnected, apply⣠suction to the pressure port; continuity should change stateâ across⢠the appropriate terminals as pressure increases. |
| Pressure hose | Hose must be clear, â¤free of kinks and securely attachedâ to the tub and theâ switch; collapsingâ or clogged⤠hose causes âŁincorrect â¤level⣠signals. |
| Control⤠harness check | Measure⤠for presence ofâ expected reference⢠voltage on the harness â¤withâ the washer powered to separate switch failuresâ from âŁcontrol-boardâ faults. |
Compatibility,â Replacement Considerations, â˘and Installationâ Procedureâ for the W10339326
The W10339326 Whirlpool Washer Water Level Switch ⣠is a âŁpressure-actuated microswitch assembly that âtranslates tub water heightâ into discrete electrical⣠signals for the machine control. A small diameter âŁvacuum/pressure hose connects the tub air space toâ an internalâ diaphragm; rising water⢠pressure deflects the diaphragm and âŁthrows one or more internal contacts to âindicate fill thresholds (small, medium, large loads âand â˘safety cut-off).⤠In normal operation the âswitch â˘provides reliableâ on/off signals to the âwater inlet valve and control logic, but the switch’s behavior can be compromised by a âclogged or collapsed pressure tube, broken diaphragm, âcorroded terminalsorâ incorrect â˘harness âmating, all of â˘which⢠produce⢠symptoms â˘such⢠as overfilling, failure to fillor inability to⤠advance⢠through fill/drain cycles.
When replacing orâ installing âthe W10339326 âŁWhirlpool â˘Washer⢠Waterâ Level⣠Switch confirm mechanical andâ electrical compatibility beforeâ fitting: verify terminal pin count and layout, âmounting boss orientationand pressure hose connector⢠diameter match the chassis âand⣠harness. Follow a measured⢠procedure – disconnect âŁmains, tag and photograph the wiring, remove the âpressure hose, bench-test âthe switch withâ a small âhand pump âor by controlled suction to observe âcontact changes, then install with the hose ârouted⣠without kinks and terminals fully seated. Typical diagnostic and installation checklist:
- Power off⢠and tag wires; inspect terminals â˘for corrosion âŁor looseness.
- Check pressure⣠hose for blockages, splitsor soft sectionsâ that collapse under vacuum.
- Bench-test âŁswitch âcontinuity while applying⣠pressure or suction to observe setpoint actuation.
- Reinstall âensuring âŁcorrect orientation,â secure hose fitandâ a final test fill/drain cycle.
| Item | Description |
|---|---|
| Terminals | Multiple spade âterminals⣠providing common and âswitched âoutputs; confirm pinout⣠before swapping. |
| Hose connection | Small-diameter vacuum fitting; must â¤be airtight and free âof kinks for correct sensing. |
| Test â¤method | apply controlled pressure/suction while measuring continuity to verify contact changes at setpoints. |
| common failures | Diaphragm â˘rupture, â¤clogged âhose,â corroded terminalsorâ broken âmounting affecting calibration. |
Q&A
What is theâ W10339326 water â˘level â¤switch â˘and âwhat âŁdoes it do?
The âŁW10339326 is âŁa⣠Whirlpool OEM water level â¤(pressure) âswitchâ assembly. It senses the â¤tub water level by measuring air âŁpressure sent through a small rubber hose⤠from âthe tub air dome. The switch â¤closes â¤and opensâ internal contacts at specific pressures⣠soâ the washer control knows when to stop filling or change the cycle stage.
What are common symptoms that the âwater level⢠switch is âfailing?
Commonâ symptoms â˘include the âwasher overfilling orâ underfilling, not âfilling at all, filling â˘and then immediately drainingor cycles that stallâ or skip âsteps. You may â˘also hear no⣠clicking from âthe switch whenâ water fills (a functioning switch â¤often clicks as it changes contacts).
How doâ I locate the water level switch on my Whirlpool washer?
The switch is usually âŁmounted â˘inside the controlâ console or behind the control⣠panel.â To access it you typically unplugâ theâ washer, âremove â˘the console or controlâ panel screwsand â˘lift or swing the⣠panel out. The switchâ has an electrical connector and âa thin rubber hose attached âto it âthat⢠runs⣠down â¤to â˘the tub air dome.
How can I test the W10339326 âto â˘see if it’s bad?
Basic tests: 1) Visual/physical: inspectâ the small rubber pressureâ hose for cracks,â clogs or disconnected ends. â2) Audible: with the â¤panel off, have a helper run a fill⢠and listen for a click from â¤the switch â˘as the âwater reachesâ levels. 3)⤠Multimeter:⢠unplug power, âŁdisconnect â¤the⤠harness, set⢠meter to âcontinuity/ohms.Blow gently into the pressureâ hose to simulate rising water; you should hear the switch click⢠and see continuity change between the⤠appropriateâ terminals. âA closedâ contact will read âŁnear â˘0 âΊ; an open contact⣠will âread âŁOL/infinite. Consult the⣠machine â˘wiring diagram⣠to identify which terminalsâ correspond⣠to each level âŁbefore testing.
What multimeter readings â˘should⢠I expect⤠when testing the switch?
The pressure â¤switch is a set âŁof mechanical contacts, so you should see either continuity âŁ(very â˘low ohms) when âŁa contact is â¤closedâ or no continuityâ (infiniteâ resistance) when âit is open. There isn’t a specific fixed resistance value to â¤expect-the vital result is âthat the state changes when you apply pressure to âŁthe âhose and that contacts areâ not âŁpermanently âopen âor shorted.⤠If â˘a contact shows⤠lowâ resistance in all positions⢠or never changes state when pressure is applied, theâ switch âŁis faulty.
Can a clogged orâ damaged âpressure hose⣠cause the same problems as âa â¤bad switch?
Yes.â A cracked,â collapsed, pinched⣠or âŁclogged pressure hose (or aâ blocked⣠air⤠dome at the tub) will prevent the switch from sensing pressure changes andâ will produceâ the same symptoms as âa failed switch. â˘Always âinspect and, â¤if needed, replaceâ the small hose beforeâ replacingâ the switch itself.
Isâ the W10339326 a direct⤠replacement andâ how âdo I âŁinstall âit?
W10339326 is âanâ OEM part used on âmany Whirlpool models, but âŁcompatibility varies by model and manufacture date-confirm with your â¤model number. Installation âbasic steps: unplug the⤠washer, remove the âŁcontrol panel toâ access theâ switch, âdisconnect the electrical â¤connector and pressure hose, remove mounting screws, transferâ any retaining âclips, install the new â¤switch, reconnect the hose and connector, reassemble the âconsole, restore powerand run aâ test â¤cycle. âMake sure â˘the hose is fully seated and secured to avoid air leaks. If you’re not pleasant working on appliances, â˘consider a qualified â˘technician.
After replacing⤠the switch, do I need âŁto calibrateâ or program âthe⢠washer?
Most Whirlpool machines â¤do not ârequire âŁspecial calibration afterâ replacing â¤the mechanical pressure âŁswitch. âOnce reinstalled âand the hose isâ secure, run a test fill/drain âcycle âto â˘confirm correct operation. Some âelectronic⣠controls â˘may run a brief self-test automatically;⢠if the machine â¤behaves oddly⣠after replacement, consult the service manual âfor any model-specific initialization or diagnostic⤠procedures.
in âsummary
The âW10339326 Whirlpool âwasher waterâ level switch â˘is a criticalâ component âthat senses âŁandâ relays â¤theâ washer’s water level to â¤the control board, ensuring appropriate fill volumes for each cycle. By regulating âfill height⣠it supports proper detergent âaction, load balance, energy and waterâ efficiencyand helps prevent overfilling or dry-running conditions that can damage the machine or compromise wash results.
Accurate diagnosis is â¤essential whenâ water level symptoms appear. Similar symptoms âcan âstem from â¤clogged pressureâ hoses, wiring faults, controlâ board issuesor mechanical failures, âso systematic testing-visual â¤inspection of hoses and connections, verifying continuityâ and signal response per service⢠documentationand checking related components-helpsâ confirm âwhether the âW10339326 is âŁthe source of the problem⣠and â˘avoids unnecessary part âŁreplacement.
When diagnosis âindicates theâ W10339326 is âdefective, âpromptâ replacement with â¤the correct âpart and âŁproper installation will restore âŁreliable âwater-level âŁcontrol⣠and âŁprotect overall washer performance andâ longevity.â Follow manufacturerâ service procedures, useâ compatible replacement partsand consider professional service if you areâ notâ experienced⣠with appliance electrical or mechanical ârepairs⣠to ensure safe, effective results.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
