316112005ā Frigidaire Oven Range Anti Tip Bracket āKit is āa mechanical safety āassembly designed toā secure a freestanding ovenā¤ or range ā¢to the āfloor or wall assembly āto prevent the appliance from tipping forward. The kit typically consists of a stamped metal bracket and ā¤mountingā hardware sized for attachment to the applianceā chassis and the finished floor or cabinet structure;ā itā is an OEM replacement partā¢ specified for compatible Frigidaire ārange models.
within ā¤the appliance system the anti-tip ā¤bracket serves āas ā¤a passive restraint that transfers tipping loadsā¤ fromā theā¤ range cabinet into the building ā£structure. It interfaces directly with the range ā£frame, leveling/adjustment legs and the ā¤surrounding ā¤installation substrateā (floor or cabinet); proper engagement depends on correct range height and āorientation so that the āchassis contacts the bracket under tipping loads. Even though theā bracket ā¢does ānot ā¤interact withā electricalā or combustion ā¢control systems, its condition and installationā¤ affect safe mechanical operation and areā¢ referenced in manufacturer installation procedures ā¢andā safety ā£compliance checks.
In this article readers willā£ find a ātechnicalā overview of the anti-tip bracket’s functional ā¤purpose,ā model ācompatibility and dimensional considerations, ācommon symptoms of improper or failed installationā (excessive movement, unsecured engagementor observable tilt)and practical troubleshooting checkpoints toā£ verify mounting integrity.The article also covers replacement considerations such as verifying ā¤part fit, appropriate ā¤fastener and anchorā¢ selectionā for the installation substrateand inspection criteria to ensure the replacedā bracket restores the required restraint āfunction.
Table of Contents
- function ā¤and Role of theā Anti-Tip ābracket in Range Stability ā£and User Safety
- How the 316112005ā¤ Frigidaire Oven range Anti Tip Bracket Kit Interfacesā with Range Frame, Floorā Anchors, āandā£ Leveling ā£Components
- Common Failure Symptoms and āDiagnostic ā£Indicatorsā of ā¤a Compromised Anti-Tip Bracket Assembly
- Compatibility, Model āFitment, Replacement Considerationsand Installation Verification āProcedures
- Q&A
- Key āTakeaways
Function and Role of the āAnti-Tip Bracket in āRange Stability and User Safety
The 316112005 Frigidaire Oven Range Anti Tip Bracket Kit ā is a stamped-steelā¢ anchoring device that creates a fixed stop atā¤ the rear of the range to ā¤preventā¤ forward rotation about theā front leveling feet. Functionally, theā¤ bracket ā£transfersā the ā¤overturning moment from the range chassis into the wall or floor substrate via its āfasteners, so that applied loads on the āopenā oven doorā¤ or the cooktop cannot produce āa tipping event. In service the bracket behavesā¢ as a mechanical stop ratherā£ thanā£ a ā¢restraint that preventsā£ allā¤ movement: it engages only whenā theā¢ range ā£triesā to rotate pastā the ādesignedā¤ limit,ā£ so correct ā¢placementā relative to the range rear footā and āproper ā¢tightening ofā the mounting fastenersā¤ are essential to achieve the ā¤intended loadā path.
- Material: typically zinc-plated orā£ coatedā¢ stamped steel for tensile and shear resistance.
- Mounting: rearā¢ chassis-to-floorā or rear-to-wallā£ connection ā¤using suppliedā£ screws/anchors ā¤appropriate toā¤ substrate.
- Primary effect: ā£limits ā£rotation (overturning ā£moment) rather than preventing lateralā£ translation.
- Installation dependency: ā¤effectiveness ādepends on ārangeā leveling,rear foot position,and correct fastener selection for the substrate.
The bracket is compatible ā£with many Frigidaire ranges that have the standard rear mountingā¢ location, but ā¢compatibility should be confirmedā¤ by ā£checking rear chassisā geometry ā£and clearance to cabinets before purchase; some models require āoption bracketsā¤ or adapters. Technicians should verify āthe bracket bears against the range’sā¢ designated engagement point afterā the range is leveled ā¢and pushed intoā¤ final position, ā£torqueā fasteners toā£ manufacturer-specified values (or use appropriate anchorsā forā drywall/concrete),ā£ and re-check after ā¢sliding āthe appliance ā¤for cleaning or maintenance. Regular inspection after any āapplianceā move and replacementā£ of bent or corroded hardware preserves the ārated performance and user āsafety.
| Item | Description |
|---|---|
| Part | 316112005 Frigidaire Oven ā¤Rangeā Anti Tip Bracket Kit |
| function | Provides a fixed stop to resist overturning moment āof āthe ā£range chassis |
| Typical Mounting | Rear chassis to āfloor ā¢or wall ā¢stud using screws/anchors |
| Compatibility Note | Fits many Frigidaire ranges with āstandard rear mount;ā¤ verify chassis geometry before ā¤installation |
How the 316112005 Frigidaire Oven Rangeā Anti Tip āBracket Kit Interfaces with āRange Frame,ā Floor ā¢Anchors, āand Leveling Components
The 316112005 Frigidaire Oven Range Anti āTipā Bracket Kit fastens to the rear range frame and to āa floor anchoring point so the appliance isā£ restrained from forward ā£rotation when ā¤the oven door is opened or ā¤when weightā£ is appliedā¤ to theā open door. The bracket mounts to ā¢theā¢ rangeā chassis using the āfactory rear cross-member āorā¢ a designated rear ā¢mountingā¤ boss and isā designed to accept āa floor-mounted anchor (such as, āan expansion anchor in āconcrete ā£or āa woodā screw into aā reinforcedā subfloor). āIn practice āthe bracket interface aligns with the ārange’s rearā foot orā anti-tip tab; when engaged the bracketā£ provides āa positive ā¤mechanical stop that prevents the range from pivoting forward while allowing normal lateral āand vertical adjustments through the leveling system.
Functionally, the anti-tip kitā provides rotational restraint while the levelingā¢ legsā carry the appliance’s vertical load and maintain plumb. The bracket and floor anchorā resist shear and overturning moments butā do notā carry the primary vertical load; āinstallers should ā¤therefore āadjust levelingā legs first to set the final ā¤height and then secureā£ the bracket toā¤ ensureā¢ theā£ anti-tip tab fully āengages.Practical installationā notes: use the appropriate anchor type for the substrate, accommodate shimsā or floor irregularities āso the anti-tip tab seats correctlyand verify āengagement by gently pulling the range forward and opening the door. Technicians commonlyā follow a short verification āsequence toā£ confirm correctā interface andā£ secure anchorage.
- Set leveling legs to the desired height and verify āoven sits plumb.
- Slide range āback soā¤ the rear anti-tip ā£tab aligns with ā£the installed ābracket.
- Secure the ābracket to the floorā anchor andā confirm ātabā engagement under forwardā¢ load.
| Item | Description |
|---|---|
| Range frameā mount | Attachment point ā¢on ā¢the rear cross-memberā¢ or chassis āthatā¤ acceptsā the ābracket and transfers overturning loads. |
| Floor anchor | Fastener type chosen for substrate (concrete, wood) that āresists shear and pull-out forces from the bracket. |
| Leveling components | Adjustable ālegs ā¢that āset vertical position and bear the appliance weight; must be adjusted before final bracketā¢ engagement. |
Common Failure Symptoms andā£ Diagnostic ā£Indicators of a Compromised Anti-Tip Bracket Assembly
The antiātip bracket ā¤performs a ā¢straightforward mechanical safety function:ā¢ it prevents the oven ā¢range from rotating forward when the door is opened ā¢or when āweight is placed on theā£ open door. The ā316112005 Frigidaire āOven Range Antiā Tip Bracket āKitā£ secures theā£ rear ā¤of the rangeā¤ to the floor or ā¢to a cabinet structure and āengages the range chassis at aā¤ definedā£ captureā¤ point āso the cabinet-to-range ā¤connection arrestsā¤ forward rotation.Technicians shouldā£ verify compatibilityā withā the āspecific Frigidaire ā£range model andā¤ the installationā surface; different subfloor andā base cabinetā constructions (wood, concrete,ā¢ tile) require matchingā anchors or fasteners and can affect the effective clamping/anchor depth and plate orientation during installation.
Compromised performance is usually indicated by mechanical looseness or visible deformation rather than electronic fault codes. Common ā¢diagnostic checks include ā£a visual inspection of bracket ā£alignmentā and fastener torque, a functional test whereā¤ a technician applies controlled forward loadā to the open doorā while observingā¤ rear engagementand direct inspection for bentā or fractured metal or missing anchors. Avoid using the applianceā door as ā£theā only means of support during ā£testing; isolate power āand secure gas ā¢connections before ā¤manipulatingā the range. ā£Practical indicators ā¤and ā¢their likely causes are listed below to guide targeted inspection and repair.
- Range slidesā£ forward or tilts when the ā¤ovenā door is opened
- Visible gap between ābracket and range chassis or ā£looseā fasteners
- Bent ā£or deformed ābracket plate, āmissing anchorā boltsor stripped screw holes
- Rangeā contacts rear cabinet unevenly or hasā lateral play
| Item | Description |
|---|---|
| forward movement when door is loaded | Bracket not āengaged or anchor failed; verifyā engagement ā¢point and perform pull test at specified load. |
| Loose ā¤or missing fasteners | Replace withā correct length/type fasteners āfor the substrate and torque to manufacturer specification. |
| Deformed bracket plate | Bracket hasā been āoverloaded or ā¤struck; āreplace the bracketā and inspect mounting surfaceā for additional ā¤damage. |
Compatibility, Model Fitment, Replacement ā¤Considerationsand Installation verification Procedures
The 316112005 Frigidaire ā¤Oven Range Anti Tip āBracketā Kit isā a metal anchoring assembly ā¤designed ā¤to prevent the range from tipping ā¤forward when the oven door is loaded or a user applies āforward force. The kit functions by securingā a steel bracket to the floor or rear base ā£cabinet ā¢and providingā a positive engagement point for the ārange rear chassis or leveling leg. Compatibility depends ā£on the range rear chassisā geometry and the āoffset between the mounting surface and ātheā range engagement point; slide-in and freestanding ā¤models can require different bracket offsetsā or hole patterns. Before ordering or fitting the kit,ā¤ compareā¤ theā bracket hole spacing ā¤and the range’s rear mountingā tab location-differences in ā¤floor-to-chassis height caused ābyā new flooring or replaced leveling legs are common reasons ā¢a āreplacement bracket ā¢will not engage ā¢properly without adjustment.
- Confirm ā¢model fitmentā by ā¤measuringā the distance fromā the range rear ārail ā¤to the floor and comparing to bracket offset.
- Selectā£ fastenersā¤ rated for the substrate (wood āstud, concreteorā¤ particleboard) and avoid screws ā¢that penetrate beyond the intended depth into gas or electricalā¢ chase areas.
- Account for installed-height changes ā¤(new flooring ā¢or under-range platform) that may require repositioning orā£ using shims.
- Perform a verification test ā¤after installation:ā lower the leveling legs slightly āand pull theā¤ range forward to ensureā£ the bracket capturesā¢ theā chassis tab without ā¢slippage.
replacement considerations includeā£ corrosion of āthe original ābracket,ā deformation from prior impactsand incompatible fastener types; replacing a damaged ā¢bracket with the 316112005 kit isā appropriateā only after verifying physicalā alignmentā¢ and secure attachment toā a structural member or suitable anchor. āInstallation verificationā procedures shouldā¢ be methodical: secure the bracket āusing the correct anchor type and ā¢screw length for ā¤the substrate, ārestore ā£the range ā£to final position,ā thenā¢ reduce leg height ā£incrementally and apply ā£a controlled forward force to ātheā oven lip to confirm āthe ā¤bracket āengages the chassis tab and prevents forward rotation. Log the mounting substrate, fastener āgrade,ā and the final measuredā¢ engagement gap so future service ātechnicians ācan troubleshootā fitment ā£changes ā¢caused ā£by floor leveling ā¤or cabinet modifications.
| Item | Description |
|---|---|
| Compatible range types | Most Frigidaire freestanding and slide-inā¢ ovens with rear ā¢chassis engagement ā£points; ā¢verifyā hole āspacing and offset before replacement |
| mount ālocation | Secured to floor or ārear ā¤cabinetā¤ base; must align with range rear ātab orā leveling leg engagement |
| Recommended fasteners | Wood screws into studs, concrete anchors āfor masonryor rated toggle anchors for hollow substrates; avoid overālong screws |
| Verification test | Lower leveling legs, āpull range forward āuntilā£ bracketā¤ captures tab, confirmā no more than minimalā play and document engagement |
Q&A
Whatā¤ is the ā¤purpose āof the Frigidaire 316112005 antiātip bracket kit?
The antiātip bracket ākit isā designed toā secure a freestanding or slideāinā¤ rangeā to āthe floor or wall soā the appliance cannot tip forward when āthe āoven door is open or whenā¢ a heavyā load is placed on ā¢the door. It prevents injury and damage byā capturingā¢ the range’s rear leveling leg or rear frame āand stopping forward ā£movement.
wich Frigidaireā ranges does part ā¢316112005 fit?
This kit isā intended for use with ā¢many Frigidaire freestanding and slideāin ranges, but compatibility can vary by model and year. Always confirmā fit for your āspecific model ā¢number by checking the owner’s manual, theā¤ parts diagram on Frigidaire’s websiteor contactingā Frigidaire customer support before purchase ā£or āinstallation.
What componentsā are in ā¢the kit and what additional fasteners orā tools will I need?
The kit typically contains a metal mounting bracket and basic mounting āhardware. You will usually need common ātools such as aā drill,ā appropriate drillā bits, a screwdriverā orā¢ socket set, a stud finderā (if mounting to a wallā stud), aā£ tapeā£ measure andā possibly anchors appropriate for your floor typeā (concrete anchors for masonry, āwood screws for wood subfloors). Ifā¤ installingā onā£ concrete or ā¤tile, use theā¢ correct masonry āanchors rather āthan relying on the supplied screws alone.
How do I install the antiātip bracket?
General steps: 1)ā Disconnect power andā¤ gas and āpull theā range away āfrom the ā¢wall. 2) ā£Position the bracket so it will capture the rear levelingā¢ leg or rear frame when the range is pushed ā¢back. 3) Fastenā the bracket ā¤to the floor or wall studā£ usingā£ appropriateā fasteners for yourā£ substrate. 4) Slide the range back āso ā¤the rearā¤ leg engages the bracket and verify it seats firmly. Follow ā¤the specific installation ā¤instructions supplied with the kitā£ or inā your owner’s manual-installation details ācanā varyā by ā£model.
Canā I mount the bracket to ā¢tile, concrete ā£or a thin floor āpanel?
Yes, but you must useā the correct ā£anchors for the āsurface. ā£For concrete or āmasonry floors use masonry ā¤anchors ā¢or concrete āscrews; for tile, select anchors āthat āwill not crack the tile āand may require pilot holes; for thin floor panels, locateā and attach āto underlying framing or use heavyāduty anchors ā¢designed for the substrate. Ifā unsure, consult aā¢ qualified technician ā£toā¢ select appropriate fasteners.
Do I need to install an antiātip bracket on an electric range, gas rangeā or both?
Antiātipā¢ brackets are ā¤required forā£ most freestanding and slideāin āranges irrespective of fuel type. The bracketā¢ prevents ā£tipping ā£risk weather the ā£appliance āis electric or gas.ā¤ Always follow ā£manufacturerā instructions and ā¤local building codes, ā£which typicallyā¢ require āantiātip devices to be ā¢installed.
How can I test that the antiātip bracket is installed ā¢correctly?
After installation, āslideā theā£ range fully back so the rear leg or frame ā¤engages the bracket. Open the oven door ā¤fully and apply forward pressure near the top of the door (carefully and without overforcing) to confirmā¢ the range does not tipā or slide off theā bracket. Also verify the bracketā is firmly anchored with āno loose fasteners. If there isā movement, reācheck fastenersā¤ and substrate integrity.
When ā¢should I replace the antiātip bracket or haveā it āinspected?
Inspect ā¤the bracket whenever the range is moved, after āan impact, āor āif you ā¤notice corrosion, bentā metal, āloose fastenersā£ or the range is notā seating properly on ā¢the bracket. Replace the ābracket if āit ā¤isā damaged or āmissing. If you relocate the range, always āreinstall or replace the antiātip ādevice āand reāanchor it toā£ the new location per manufacturer instructions.
Keyā£ Takeaways
The 316112005 Frigidaire āOven Rangeā Anti āTipā£ Bracket Kit āplays a focused but essential role in kitchen safetyā¢ by anchoringā the range to the floor or wall āto prevent ā¤accidental ā£tipping. As a purpose-built OEMā component, it helpsā¢ maintainā¤ the appliance’s ā¢stability during ā¢normal useā and ā¤reduces ātheā£ risk of injury or ā¤damage from a range tippingā¢ event. Ensuringā that theā correct bracket is presentā and in good ācondition is a simple, ā¤effective measure that ā¢supports overall householdā safety and alignsā with āmanufacturer safety recommendations.
Because an āineffective āor āmissingā anti-tip bracket can create ā£a notable hazard, proper ā¢diagnosisā and timely replacement when warrantedā are significant. Inspecting ā¤the bracket for wear, damageorā improper mounting-and replacing it with the ā¤correct 316112005 kit when necessary-restores the intended safety ā¢function.ā Where āuncertaintyā£ exists about āfitment āor condition,ā¤ consultingā manufacturer guidance ā£or ā£a qualified service professional willā£ help ensureā theā bracket is appropriate and installed correctly, preserving āboth appliance performance and āoccupant safety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
