240359001 Frigidaire Refrigeratorâ White Door Shelf⣠Bin is a molded refrigerator door storage component designed to mount into the inner door panelâ of compatible frigidaire refrigeration units; it functions as a âremovable â˘shelf or retainer bin for bottles, jars and other stored items. Typically fabricated from injection-molded thermoplastic (commonly ABS or polypropylene) and finished in white to match interior trim, the part includes locating tabs or clip features to engage door rails or retainer tracks and may incorporate drain slots or molded ribs for rigidity.
Within⢠the appliance, the door âŁshelf âbin is part âof the â˘door assembly and interfaces â¤mechanically with the door inner liner, rail/clip system and door gasket âby contributingâ to âload distribution and clearance when the door⣠is closed. While âit âŁis not part of the refrigeration loop or electrical systems,its condition influences⣠user-accessible storage capacity âand can affect door â˘sealing and closing behavior when damaged or improperly installed; for example,broken mounting tabs can allow theâ bin to shift,which may âprevent⣠full door closure and increase heat infiltration into the cabinet.
This âŁarticle will âdescribe the bin’s âintended function and dimensional/mounting compatibility, identify common failure⢠symptoms suchâ as cracked/missing tabs, sagging or poorâ fit, â¤and outline practical troubleshooting steps â˘to verify fitment and diagnose door-close issues. It will also âŁcover replacement considerations including verifying model compatibility and part number, inspection of retainers⤠and mounting features, safe removal and reinstallation proceduresandâ factors to weigh when choosing an OEM or equivalent replacement.
Table ofâ Contents
- Function and âRole of the 240359001 Frigidaire Refrigerator White⤠Door Shelf Bin
- How the â240359001 âFrigidaire Refrigerator White Door Shelf Bin Works Inside the Appliance
- Common Failure Symptoms and Diagnostic⣠Indicators for Door shelf Bin â˘Integrity and â¤Retention
- Compatibility, Replacement Considerations, Installation Procedureand Troubleshooting Diagnostics for the 240359001 Door Shelf Bin
- Q&A
- Key Takeaways
Function and⢠Role of⤠the 240359001 frigidaire Refrigerator âWhite âŁDoor Shelf bin
The 240359001 Frigidaire âRefrigerator White Doorâ Shelf Bin functions as a removable storage âŁtray⣠that attaches to the inner door liner and provides â¤organizedâ placement âŁfor bottles, condimentsand small containers. Mechanically, the bin uses moldedâ snap-fit mounting tabs that transmit vertical and lateral⤠loads into the door liner; during door movement the bin experiences âboth shear and⢠bending stresses at the tab roots. Theâ part is⢠typically injection-molded ABS âor similar thermoplastic chosen for⢠impact resistance and dimensional stability at refrigerator temperatures; the âwhite finish isâ cosmetic and dose not change the load-bearing behavior. In practice, these bins are intended for distributed household loads (small jars, condiment bottles, â¤beverage containers) rather than concentrated heavy items that âcreate high bending moments on a single⤠tab.
- Snap-fit⢠mounting tabs that engage predefined slots in the door liner
- Injection-moldedâ thermoplastic construction with smooth white finish
- Common wear âpoints: tab roots andâ contact edges where repeated loading causesâ fatigue
- Designed for removable, tool-free replacement for maintenance or cleaning
Compatibility is steadfast â˘by the tab geometry and spacing rather than color or surface â˘finish, so technicians should verifyâ the part number and compare the mounting hook profile toâ the existing door liner before ordering a replacement. âTypical failure symptoms âŁare visible cracksâ at the tab bases, looseness or⢠lateral play when âthe doorâ is openedand complete disengagement under modest load; a practical bench check is to apply a downward force to⣠theâ loaded bin â˘and observe âwhether the tabs deflect or fracture. Replacement is straightforward: disengage the âtop âedge from the liner, rotate âout the bin,⢠inspect the liner slots for damage, then align tabs and press until the tabs fully engage; avoid solvent cleaners that can embrittle ABS andâ use warm water and mild detergent for cleaning.
| Item | Description |
|---|---|
| Part number | 240359001 Frigidaire Refrigerator White Door Shelf Bin |
| Material | Injection-molded thermoplastic (commonly ABS) |
| Mounting interface | Snap-fit tabs that engage slots âin âthe door liner; alignment critical |
| Typical failure modes | Tab root cracking, plastic creep, abrasion at contact edges |
| Inspection cues | Loose fit,â audible popping on door movement, visible cracks or deformation |
How the 240359001 Frigidaire Refrigerator White Door Shelf âŁBin Works Inside the Appliance
The 240359001 Frigidaire refrigerator White Door Shelf Bin is a molded door-mounted⢠storage tray that provides âŁlateral support for bottles, jarsand âŁother small â˘containers in the refrigerator door. mechanically, it relies on molded âŁretention tabs and keyed edges that engage matching slots in theâ inner door liner⣠so âthe bin transfers load to the door structure rather than toâ its molded lip. The part is typically â˘made from⣠a⣠rigid thermoplastic with a smooth interior for easy cleaning; its⢠white finish⢠is cosmetic and does not affect thermal performance. Because the â˘bin is open toâ the cabinet interior, it does not alter airflow or cooling patterns, but improper seating⤠or cracked tabsâ can âallowâ the bin to hang at an angle and interfere with door closure⤠or gasket sealing.
In service and compatibility terms, this door shelf binâ is a field-replaceable component sized to specific âfrigidaire door geometries; techniciansâ should confirm clip spacing and shelf depth against the door liner before ordering replacements. Common failure modes include âfractured retention tabs from repeated removal, stress whitening at âŁmounting pointsand warping caused by exposure to high heat duringâ cleaning. Practical diagnostics include checking for play at the engagement points, verifying that the bin sitsâ flush when the door âisâ openand confirming that stored items do not shift âŁexcessively when the â˘door is operated.Replacement restores intended load⣠path and prevents interference with internal door components such as dispensers or ice chutes.
- Common features: molded retention tabs, rigid thermoplastic construction, âsnap-in mounting compatible with designated â¤Frigidaire âdoor liners
- Typical service observations: cracked tabs, loose fit, interference with door seal, visible wear at contact points
- Technician checks: measure clip âspacing, inspect tab integrity, confirm flush seating and load transfer
| Item | description |
|---|---|
| Material | Rigid thermoplastic (commonly ABS or polypropylene), smooth interior for cleaning |
| Mounting | Snap-in retention âtabs that engageâ door liner slots; designed to transfer load to door frame |
| Typicalâ use | Storage of condiments, small bottles, dairy containers⤠in the door pocket |
| Common failure | Fractured or worn retention tabs causing loose fit or hanging⢠bin |
Common Failure â¤Symptoms and Diagnostic⢠Indicators for Door Shelf Bin Integrity and Retention
The 240359001 Frigidaire Refrigerator White Door Shelf Bin is an injection-molded door storage â˘component that âprovides lateral and vertical⤠retention for bottles, jarsand âŁother door-stored items.Itâ secures to molded bosses or â¤rail clips âon the refrigerator door via integral mounting tabs and a retention lip;⤠damage or dimensional changes to these features compromise the bin’s ability to hold load without disengaging. Technicians should âunderstand âthat visible deformation, embrittlement from ageor materialâ fatigue at the mountingâ bosses are primary causes of functional failure âand typically require â˘replacement â˘rather than field ârepair because the molded features determine fit âand retention geometry.
Common failure âsymptoms present as mechanical loss of retentionand diagnostic checks⤠are largely visual and mechanical. Perform a⢠hands-on retention test by applying inward and downward load while observing the mountingâ interface for movement, audible fracturesor displacement; inspect for hairline cracks at the â¤boss/tabs, permanent warpageâ ofâ the⢠retention lipand missing or âŁrounded clip surfaces. Practical examples: a crackedâ lower â¤tab often allows the bin to pivot out under the weight⢠of a large container, âwhile a â˘deformed lip willâ permit tall bottles to âshift forward and fall when⢠the door⢠closes.The following⣠list summarizesâ typical indicators to⣠record during troubleshooting:
- Mounting tab fracture: visible cracks or detached tabs at the bin’s attachment points.
- Loss of positive engagement: bin moves⢠laterally or can be pulled out without the⤠usual resistance.
- Warping or sagging: retention lip flattened or bowed, allowing stored items to slide forward.
- Localized abrasion or roundedâ clip surfaces: wear where the bin mates with door rails, indicating repeated slippage.
| Item | Description |
|---|---|
| Primary âfailure zones | Mounting tabs, boss bosses, retention⤠lip – inspect for cracks, âdeformationand material loss. |
| Diagnostic checks | Visual inspection, manual retention/load test, compare fit against an undamaged⢠bin or OEM replacement. |
| Practical remediation | Replace the bin if mounting features are compromised; minor surface scratches do not typically affect retention. |
Compatibility, âReplacementâ Considerations, Installation âProcedure,⤠and Troubleshooting Diagnosticsâ for the 240359001 â¤Door Shelf Bin
The 240359001 Frigidaire Refrigerator White⢠door Shelf Bin is a molded thermoplastic storage component that âmounts to the inner door linerâ using stamped⣠or molded retention bosses and engagement tabs.â Functionally â˘it provides cantilevered storage for bottlesâ and â˘small containers; the mechanical load capacity is governed⣠by the geometry and integrity of the retention tabs and the door liner bosses ratherâ than the bowl section itself. Compatibility requires matching the bin’s tab spacing, hook profileand top/bottom mounting orientation to the â˘refrigerator’s liner – many Frigidaire models share similar bins, but differences in tab shape or liner boss height will prevent âa correct fit. Inspecting the old bin and the liner for âfractured tabs, elongated holesor material creepâ gives a practical â¤assessment: a âŁbin âŁthat sags under modest load âor âŁshows hairline cracks at the tabs âindicates the need for replacement, whereas fitment problems often trace backâ toâ damaged liner bosses or debris in the slots.
- Removal: empty bin, support inner edge, depress or pry release tabs and slide â˘the bin out of the â˘liner slots.
- Installation: align bottom hooksâ into liner slots,â pivot the top âinto position andâ pressâ until⣠engagement is audible; verify full seating under⤠load.
- Troubleshooting symptoms: sagging or detaching under light load (broken/creeped tabs), lateral movement or rattle (worn clips â˘or misalignment), visible cracks â˘at â˘tab junctions (material fatigue âor impact damage).
| Item | Description |
|---|---|
| Part number | 240359001 (OEM Frigidaire white door shelf bin) |
| Material | Molded thermoplastic (commonly ABS or HIPS); rigidity concentrated at tabs and ribs |
| Common failure modes | Stress cracks at âretention tabs, boss failure on door liner, plastic⣠creep causing sag |
Follow a controlled installation procedure: clear the door area of obstructions, â˘protect the liner âŁduring removal and insertionand use a broad, even force to seat the bin⣠so tabsâ engage without localized over-stress.⤠For diagnostics, perform a visual inspection under bright light for micro-cracks â¤and verify tab engagement âby applying a steady, moderate load at the front lip; persistent movement after installing a new bin usually indicates liner boss damage ratherâ than a defective bin. If the linerâ bosses are â¤compromised, repair options include replacing the entire door liner or installing a compatible mounting ârail; document the tab geometry and spacing before ordering replacements to â¤ensure proper mechanical fit ratherâ than ârelying solely on model-year or appliance family naming.
Q&A
What⢠is the 240359001â Frigidaire Refrigerator White Door Shelf Bin?
The 240359001 is an âOEM (original⤠equipmentâ manufacturer) replacement door shelf âŁbin made for certain Frigidaire⤠refrigerators. It’s a whiteâ molded âplastic bin that mounts â˘to â¤the inside of the refrigerator door to hold items such as condiments, bottles and small containers.
How do I know if this bin fits my â¤refrigerator model?
Verify fitment by checking your ârefrigerator’s âmodel number (usually found on⣠a tag inside the fresh food compartmentâ or on the door frame). Crossâreference that âmodel âŁnumber withâ the parts list or with â¤an authorized parts⣠supplier. If you cannot find a list, compare the shape, mounting bracket style⢠and⣠measurements of⣠your âexisting bin to ensure the 240359001â hasâ the same mounting tabs and overall size.
How do I remove the old door shelf bin and install the 240359001?
Most door⣠bins remove by⤠lifting up slightly and â˘pulling outward to clear the stops; some have release tabs⣠you â˘depress to disengage. To install, align the mounting rails âor tabs at the top of âthe bin with the slots on the door, hook them in, then press the bottom into place⢠until it⣠snaps or seats. âIf your model uses retaining clips, âŁdepressâ those before removal⢠and ensure they’re intact before â˘installing the new bin. If unsure, consult your refrigerator’s service manual for exact⣠instructions.
Is the 240359001 âdishwasher safe and how should I clean it?
Although⤠many refrigerator door bins are injection-molded plastic, âŁit’s safest to hand âwash the â¤bin with warm⤠water and mild dish soap. â˘Avoid âŁharsh abrasives, scouring pads âand strong solvents⢠(bleach âŁor acetone) which canâ damage the plastic â¤or finish. If you use a dishwasher, âplace â˘the binâ on the top rack⣠only and use a gentle cycle, but hand washing is recommended â¤to preserve color and shape.
Does the 240359001 âcome with mounting hardware or clips?
Typically the⣠part is sold as the bin only and uses the existing mounting ârails â˘and clips already on the ârefrigerator door. Some suppliers â˘may offer âkits⣠that⤠include clips if they’re⢠commonly⣠broken for specific models. Check the product description where you buy the part; if your existing clips are damaged,orderâ replacement clips or⢠a kit that includes them.
What are common reasons to replace a doorâ shelf bin?
Common âreasons include cracks or âbreaks from impact or carrying heavy items, warped â˘plastic from heat exposure,⤠broken mounting tabs thatâ prevent the bin âfrom â˘securing to the doorand discoloration or staining that can’t be cleaned. Replacing the bin restores⢠safe storage and proper door operation.
Are âthere alternatives to buying the original â240359001 part?
Aftermarket (nonâOEM) replacementâ bins âmay be available and can be less expensive, but fit, finishâ and durability can vary.If appearance and exact fit are significant, purchasing the OEM 240359001 from Frigidaire or an authorizedâ parts dealer is recommended. Always confirmâ compatibility before buying an aftermarket choice.
How much weight can the 240359001 door shelf holdand are there tips toâ prevent damage?
Manufacturers don’t usually publish a specific weight rating for individual âdoor bins,⢠but they are intended for lightweight toâ medium items (condiments, small bottles, jars). To avoid damage, distribute weight evenly, do not overload with⣠heavy â˘jars or gallon containersand avoid using the binâ as a⤠step or support. If you â˘need âŁto store heavier items, use âinterior shelves that are designed for greater load capacity.
Key Takeaways
The 240359001 Frigidaireâ Refrigerator White Door shelf Bin functions as an essential storage âand organizational component within compatible ârefrigerator models.â by providing a stable, contoured shelf area⤠in the door, it helps secure bottlesâ andâ containers, reduces⣠the risk of spillsand contributes to efficient use of â¤interior space. As an original equipment part designed for proper fit and alignment, it also supports consistent operation and â¤user convenience over the life of â˘the appliance.
Timelyâ and accurate diagnosis of damage-such as cracks, warpingor improper seating-is critically important to determine whether repair or âŁreplacement is necessary. Replacing aâ compromised door shelf⤠bin with the correct part preserves storage functionality, maintains appliance safetyand avoids secondary issues caused by poorlyâ fitting âcomponents. When replacement⣠is⣠warranted,â confirming âpart compatibility and following recommendedâ installation practices ensures reliable, long-term performance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
