137221600 Frigidaire Washer⣠Drain pump âis a motor-driven drainâ pump assembly used to evacuate wash and rinse water from a residential washing machine. It is âindeed an electromechanical component-typically âa smallâ electric âmotor âŁcoupled â¤to an⣠impeller or pump housing-withâ inlet and outlet ports, mounting flanges and an electrical connector. The⤠partâ is installed in the washer âcabinetâ and⤠interfaces âmechanically with âthe tub drainâ andâ drain hose; it is indeed intended â¤for use in compatible Frigidaire⢠laundry appliances and âequivalent replacement applications.
The drainâ pump’s â˘role is to remove water from the tub during drain and spin cycles âand to route⢠that âŁwaterâ out through the household⤠drain system. Functionally, it⤠is indeed controlled by the washer’s central control board and is âinterlocked⤠with sensors â¤and safety systems such asâ the door/lid âŁlock circuit and⣠water-levelâ sensingand it cooperates with the drain hose, standpipeand any lint or debris traps. Proper sealing and mounting prevent leaks and air âingress; âelectrical⢠connections provide the âdrive signal â˘that starts and stops â˘the⤠pump â¤based on the machine’s⣠programmed cycle.
In thisâ article readers willâ find a technical overview of how âthe 137221600 drainâ pump âoperates,guidance on determining âcompatibility and cross-reference considerations,common âŁfailure symptoms (forâ example: no drain,weak flow,humming noise,leakage,or intermittentâ operation),systematic troubleshooting steps including visual inspection,obstruction removal and basic electrical checks,and⢠practical⣠considerationsâ for âŁsafe removal and⣠replacement (draining the machine,harness and âŁhose handling,gasket alignmentâ and torqueing,and verifying operation after installation). The dataâ is intended toâ help technicians, engineersand appliance⣠owners⣠diagnose problems and plan appropriate repairs without prescribing specific commercial products.
Table of âContents
- Function⤠and Role⤠of the â¤Drain Pump âin Frigidaire Washers
- How âthe 137221600 Frigidaire Washerâ Drainâ Pump Works â¤Inside the Applianceâ – Motor, Impellerandâ Control interface
- Common âFailureâ Symptoms and⣠Diagnostic Indicators for drain Pump â¤Faults
- Replacement⣠Considerations,â Model Compatibilityand Installation âBest Practices
- Q&A
- To Wrap It Up
Function and âRole of the drain Pump in Frigidaire washers
The primary ârole of â˘the⢠137221600 Frigidaire âWasher Drain Pump is âtoâ remove â¤wash and rinse water from the tub by convertingâ electrical energy to⢠hydraulic flow throughâ a small electric motor driving an impeller. During âthe drain and spin cycles the washer’s âŁcontrol board energizes the pump â˘untilâ the water level sensor or⤠pressure switch â¤indicates the tub isâ empty; the pump housing, âimpeller⢠geometry⣠and discharge path are designed â¤to create sufficient flow against theâ outlet hose andâ any check valve. Typical behavior to expect âfrom a healthy pump is â¤a steadyâ electrical draw with smooth, vibration-free rotation; abnormalâ soundsâ (grinding, rattling) or a â˘continuous hum often indicate debris lodging theâ impeller, worn bearingsor a seized motorâ shaft rather than an electronic control â˘fault.
compatibility and practical servicing require â˘matchingâ the pump’s mechanical mounting, electrical⣠connector and⣠hydraulic orientation to the specific⢠Frigidaire model; the 137221600 â˘unit is an OEM-design pump that will replace units with the⣠same âŁmounting footprint and connector configuration.⢠For troubleshooting,â first verifyâ the discharge hose and filter â¤screen are clear, then isolate the âpump electrically and verify motor continuity with a multimeter; lack of continuityâ means the motor windings are open âand the pump âŁshouldâ be replaced. Typical on-site checks â˘and indicators include:
- Washer retainsâ water or fails to advance past drain cycle.
- Loud bearing⣠noise⣠or â˘foreign-object grinding âduring drain.
- Intermittent operation or pump runs but flow is reduced (clogged impeller/hose).
- Visible âleaks at the pump housing or hose âconnections.
| Item | Description |
|---|---|
| Part | 137221600 Frigidaire Washer Drain Pump (OEM replacement) |
| Typical âelectrical | 120 V AC supply⢠on âNorthâ American machines;â verify model-specific spec âbeforeâ installation |
| Service tip | Confirmâ mechanical âfit and connector type; clear hoses/filters before replacing â˘the pump |
How the 137221600 Frigidaire âWasherâ Drain Pump Works Insideâ the⢠Appliance – â˘Motor, âImpellerand Control âŁInterface
The 137221600 Frigidaire Washer⤠Drainâ Pump contains a compact electric motor directly coupled to a moldedâ impeller inside a sealed housing. When⢠the washer control signalsâ a drain cycle, the motor turns the âimpeller to generate centrifugal flowâ that routes wash water through the pump volute âŁand out the â¤drain hose; the housing oftenâ incorporates an integral filter path and a one-way feature to reduce âŁbackflow. The internal assembly is engineered for intermittent⢠duty and âthermal protection,and the⤠mechanical interface (mounting tabs,shaft position,and electrical⣠connector)⣠determines compatibility with⢠specific frigidaire⣠washer models-matchingâ those⣠details is ânecessaryâ for a proper OEM replacement.
The pump’s control â˘interface âis â¤a simple switched power connection⢠from âthe washer’s control board or relay/triac driver; the control supplies mains-rated voltage for the short drain interval and the board monitors water level or pressure-sensor feedback to stop the pump.Common operational behaviors include normal run, stalled/humming under load from obstructionsor intermittent operation â¤due to⣠worn bearings or degraded windings. Practical diagnostics⤠for a service technician âincludeâ checking â˘for foreign⤠objects âin the impeller âŁchamber, verifying continuityâ and insulationâ of the motor windings with âŁa multimeterand confirming the control⤠boardâ provides the expected drive signal duringâ a drain âŁcommand.
- Typicalâ features: â¤sealed motor/impeller assembly, â˘integrated drain port, âŁand standard electrical connector for âŁplug-in replacement.
- Common faults: impeller⣠blockage,⣠mechanical wear (noisy âbearings), electrical open winding, â˘or lossâ of⣠thermal protection.
- Service tips:â inspect the volute for lintâ and coins, test motor⤠resistanceand confirm control⤠board outputs before replacing the pump.
| item | Description |
|---|---|
| Motor | sealed â¤electricâ drive providingâ intermittent torque for the impeller; supplied âby the washer control â¤circuit. |
| Impeller | Centrifugal molded blade that moves water⢠from âŁthe âtub to the drain âŁhose; susceptible⤠to clogging from debris. |
| Control⤠interface | Plug connection and wire leads that receive âswitched mains from the washerâ control â(relay⤠or triac). |
| Common failure âmodes | Blockage,â shaft/bearing wear, electrical â˘winding âfailureor thermal cutout activation due⤠to overload. |
Common Failure⤠Symptomsâ and Diagnostic â¤Indicators⤠for âDrain âPump Faults
The 137221600 Frigidaire âWasher⤠Drain Pump is an âelectromechanical centrifugal pump assembly âthat evacuates wash water⢠through⤠the⣠drain hose⢠during the drain and⣠spin âportions of a cycle. It â˘combines anâ impeller, â¤pump housing, motor, â˘and seal; failures âŁtypically arise from mechanical blockage â¤of the impeller,â seal leakageorâ electrical faults at the motor or connector.Technicians should verify physical âcompatibility with a given Frigidaireâ model by âcomparing âmounting â¤points,connectorâ pinout,and â˘supply⢠voltage,sence the same pumpâ housing â¤and impeller design can âbe paired with different motor â˘modules across model years.
Common⣠diagnostic indicators include⤠hydraulic symptoms (slow or no drainage, backflow into the tub), â¤acoustic signatures (grinding, rattlingor a âhigh-pitched hum)andâ electrical readingsâ (open⣠windings, short âto â˘ground,⣠orâ no⢠drive âvoltage fromâ the control board during commanded drain). Practical troubleshooting steps âare: inspect and⣠clear the pump inlet and trap⤠for âdebris, measure motor winding resistance and insulation âto âground âŁwith âa multimeter,⣠and verify control-board output voltage while commanding a drainâ cycle; ârepeated high-amperageâ draws or⤠a seized impeller point⣠to mechanical wear and⣠require pump replacement rather than board repair.
- No⣠drain: water remains after cycle completion or slower-than-normal evacuation
- noisy operation: grinding, rattling,⢠orâ humming⣠during drain
- Intermittent function: works sometimes,â fails other times-possible electrical connector or â˘intermittent windingâ fault
- Leakage: visible water⣠from pump âhousing or seals indicating seal âfailure
| Item | Description |
|---|---|
| No âŁdrain | Check for foreign objects in pump inlet, verify continuity across motor windings,â and confirm theâ control board supplies line voltage during a commanded drain. |
| Loud grinding / humming | Inspect impeller for debris or âdamage and measure current; âŁhigh current with seized rotation indicates mechanical failure and probable replacement⢠of the â˘pump âassembly. |
Replacement Considerations,⤠Model Compatibilityandâ Installation Best⣠Practices
The⢠137221600â Frigidaireâ washer â¤Drain Pumpâ is a service replacement for many Frigidaire⤠washers âŁand functions⢠as a direct-drive centrifugal pump: theâ motor shaft⤠turns anâ enclosed impeller that forces wash and waste water âŁthrough âŁthe discharge hose whileâ the machineâ control supplies simple â˘on/off power âto the unit.⣠When⣠evaluating compatibility, verify fourâ physical and âelectrical attributes-electrical â˘connector type and voltage,â discharge âport diameter â¤and barb style, mounting flange geometry and⣠screw patternand⣠anyâ integrated check valves or âfilters. differences in port⤠size or mounting âtabs betweenâ OEM âand aftermarket pumps can requireâ hose adapters, different clampsor minor bracket modifications; matchingâ the⢠connector and mounting âŁorientation prevents âstrain onâ theâ wiring⣠harness andâ ensures the pump sealsâ properly to the tub outlet during operation.
- Confirm part-to-model fit by comparing harness connectors and mounting holes rather than relying solely on part numberâ cross-references.
- Inspect the tub outlet and discharge hoseâ for debris âŁor collapsed hose⣠that can mimic pump failure.
- Measure terminal continuity âŁwith a multimeter before âinstalling âto rule out âŁan â˘open-winding motor.
- Replace â¤clamps,gaskets,and âany⢠brittle hoseâ segmentsâ when â¤changing the pump⢠to reduce âfuture leaks.
- Run a âŁdrain cycle test âwith⢠the washer open toâ observe impeller ârotation â¤and â¤check for leaks before â¤fullâ reassembly.
| Item | Description |
|---|---|
| Electrical | Typically âpowered by â˘household 120 VAC⣠through â˘spade or multi-pinâ connector; verify connector â¤pinout and continuity⣠prior â˘toâ installation. |
| Mounting | integrated flangeâ with screw points; confirm flange geometry and⢠clearances to⢠avoid interference with the tub or frame. |
| Discharge âconnection | rubber hose barb⢠or molded outlet-measure inner diameter â¤and clamp type to⤠ensure âaâ proper seal. |
| Common failure modes | Clogged impeller, â¤foreign-object⣠seizure,â bearing/winding failureor electrical connector corrosion. |
During installation, isolate power and⣠removeâ standing â˘water before disconnecting the old pump to â˘reduce risk of shock⤠and contamination; retain⤠fastenersâ and note hose routing toâ reproduce the factory orientation. After mechanical â¤fitment,â perform a functional test: verify motor âwindings show âcontinuity (not an open â¤circuit), apply power⣠momentarily with the pumpâ supported âand observe smooth impeller rotation and normal motor⣠sound-loudâ grinding or a spinning-free but non-pumping impeller indicates internal damage or an obstruction. secureâ hoses with corrosion-resistant⢠clamps, âŁverify that any integratedâ check âŁvalve is installed âin the correct directionand run a complete drain/spin cycle to confirm leak-free operation and âcorrect electrical behavior before replacing access âpanels.
Q&A
What is the âFrigidaire part 137221600 and⣠what doesâ it do?
Part 137221600 â¤is â¤the drain pumpâ assembly â˘used in certain Frigidaire âwashing machines.⤠Its job is to pump the wash and rinse water âout of the tub and into the household drain â˘during â˘the drain andâ spin cycles.â The assembly typically includes the pump âmotor and âan impeller housing andâ connects âtoâ theâ machine’s âŁdrain hose â¤and control electronics.
What are common symptoms that indicate the 137221600 drain pump is failing?
common âsymptoms include the washer not drainingâ or draining very⢠slowly, standing âŁwater âin the tub after a cycle,â loud âgrinding â˘or humming noises during drain, irregular or âno spinand⣠leaks around the â˘pump area. Someâ ofâ these symptoms can â˘also âbe âcaused by clogged⣠drain hoses, foreign objects stuckâ in the impelleror âcontrol⣠problems,â so diagnosis is important.
How can I â¤test the 137221600 âdrain pump to see if it is bad?
First unplugâ the âwasher and access âŁthe âpump (follow your model’s service instructions). âŁVisually inspect for âobstructions in theâ impeller and for leaks. Use a multimeter to check â¤for continuity across the â¤pumpâ motorâ terminals⢠– an open circuit⢠(infinite resistance)â usually indicates⢠a failed motor.Also check for short to ground. For technicians⢠only: a powered bench test with the âcorrect âvoltage can confirm whether the â˘motor runs, âbut live testing should âŁbe done with proper safety⤠precautions.
canâ I clean or repair⢠the 137221600 pumpor âshould I⣠replace it?
If theâ problem âis a foreign object (coins, lint, small garments) blockingâ the impeller or a clogged inlet, cleaningâ can restore operation. if the motor windings are open, the bearings are âseized, the impeller is damaged,⤠or⣠the pump leaks, replacement of âthe⢠entire⣠pump assembly â¤isâ recommended. In⤠most cases replacing the assembly is⣠the fastest andâ most â˘reliable fix.
Is the â137221600â an OEM part⢠and âare there âaftermarket⢠alternatives?
137221600 is an OEM Frigidaire âpump part number. There are aftermarket and â¤refurbished pump assemblies that claim compatibility, but⢠quality and fit can vary.For reliable fit âŁand warranty, âmany⢠technicians âprefer genuine OEM parts âŁor reputable aftermarket brands that⢠specificallyâ list compatibility withâ your washer model.â Always cross-reference⢠the âwasher model number and the pumpâ part â¤number⢠before âpurchasing.
How difficult is â˘it⣠to â¤replace the 137221600 drain pump âŁand what tools⢠are needed?
The difficulty âŁis âmoderate and typically doable for someone agreeable with appliance repair.Basic tools include a screwdriver âset,pliers,and possibly â¤a nut âŁdriver or socket set. Steps generally â¤are: unplug the⢠washer, turn⤠off⢠water, â˘drain any remaining⢠water, remove the access panel,⢠disconnect the electrical⣠connector⤠and drain hoses from the âpump, remove mounting screws or âŁclips, install the new⤠pump, reconnect hoses⣠and wiring,â and âtest.⢠Consult your washer’s service manual for model-specific instructions⤠and âsafety â¤steps.
My washer hums during drain but does notâ pump water â- could â˘the 137221600 pump â˘be theâ reason?
Yes. Aâ humming sound with no pumping often indicates the âpump motor is trying⢠to run âŁbut âŁthe⣠impeller is jammed (debris or seized bearings) or the motor â˘is âfailing internally. First unplug the machine âand inspect âthe impeller for âŁobstructions. If â¤the impeller spins freely âby hand âand there is â¤continuity âacross theâ motor terminals, âŁthe motor may still be weak orâ wornâ and replacement⢠of the pump assembly is⤠usually required.
How can I prevent future problems âwithâ the âŁ137221600 drain pump?
Preventive steps include running occasionalâ maintenance cycles with a âwasher cleaner, using⣠mesh⣠bags for small items (socks) to prevent them entering the drain path,⤠checking âand cleaning any coin/lint traps orâ filter accesses (if âŁyour model has them), avoiding overloading â˘the machineand inspecting drain âhoses⢠periodically for kinks â¤or blockages. Promptly addressing⣠unusual noises â˘or slow drain performanceâ helps avoid pumpâ damage.
To Wrap It Up
The 137221600 Frigidaire washer drain pump â¤is a critical component âresponsible â˘for removing water from the wash âŁtub at the⢠end⤠of âeach â¤cycle. Reliable pump operation ensures proper draining, efficient cycle completionand helps âpreventâ standing water,â odors,â and potential water damage. As an OEM-designated part, itâ is âindeed engineered âto meet the performance⣠and fit specificationsâ of compatible Frigidaire machines, contributing to overall âappliance reliability and longevity.
Timely and accurate diagnosisâ of⣠drain-related⢠issues-such as failure to pump, unusual noises during drain âŁcyclesor slow draining-is essential to determine whetherâ the pump, âassociated hosesor electrical âŁcomponents⤠are the source of â˘a problem. Prompt replacement⢠ofâ aâ failing 137221600 âŁpump â˘can restore âŁnormal operation, reduce âŁthe risk ofâ secondary âdamageand avoid more⢠costly âŁrepairs later.â Using the correct replacement⣠part and confirming compatibility helps⢠preserve appliance performance âand maintain anyâ applicable warranties.
When â˘replacement is required, professional assessment and installation are recommended â¤to ensure safe, âcorrect⢠fitting⣠and proper⣠electrical connections. Post-replacement âtesting and inspection âhelp verify that theâ issue âhas been resolved and that the washer⤠is operating as âŁintended. appropriate diagnosis and timely replacement of the 137221600 drain pump support âŁdependable washer function andâ minimize the likelihood⣠of recurring issues.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
