807117001⤠Frigidaire Dishwasher⣠Drain â¤Hose isâ a â¤replacement âdrain hose designedâ forâ use with Frigidaire residential dishwashers; it is âŁa flexible conduit that conveys wastewater from the dishwasher’s internal â˘pump and â˘sump to the household drainage system.⤠As⤠a fluid transfer component, the drainâ hose is typically made from durable, chemically⢠resistant polymer and â˘incorporates fittings orâ crimps at each end to interface with the âpump outlet, air âgap, garbageâ disposal or⣠sink⣠tailpiece.
Inside the appliance, the drain hose interfaces directly with âthe drain pump, check valve or anti-siphon device and, downstream, with the sink â¤drain, disposer⣠or standpipe. Its proper routing,diameter,andâ connector type determine flow characteristics,backflow prevention and âthe ability to self-drain;⣠improper installation (kinks,low loops,loose clamps or insufficient slope) can cause â˘slow⣠draining,siphoning,orâ leakage. âThe hose must also withstand âexposure to hotâ water, detergents and occasional⣠food debrisand âŁso affects both hydraulic performance and serviceability of âthe entire drain subsystem.
In this article readers willâ gain âa technical overview⤠of the drain hose’s function and⤠materials, guidance on compatibility and correct routing with common Frigidaire dishwasher âmodels,â a list of â¤typical⤠failure symptoms (leaks, clogs, odors, âpumpâ overload), step-by-stepâ troubleshooting checksand practical replacement âŁconsiderations⤠such⢠as required length, inner diameter, connector style, securing âmethods and relevant plumbing/code constraints. The aim is⢠to⢠provide the details needed for âaccurate diagnosis and safe, code-compliantâ replacement by a technician, engineer or informed appliance owner.
Table of âContents
- Function â˘and hydraulic role of âthe dishwasher drain hose in⤠wastewater evacuation âand pressure management
- How the 807117001 Frigidaire Dishwasher Drainâ Hose operates within theâ pump, air gap and household drainâ circuit
- common failure symptoms, flow-restriction indicators and diagnostic tests for drain âhose faults
- Compatibility matrix, replacement âŁspecifications andâ installation considerations forâ 807117001 frigidaire Dishwasher Drain Hose
- Q&A
- To Conclude
Function and hydraulic role of the dishwasher⤠drain hose inâ wastewater â¤evacuation and pressure management
The 807117001 Frigidaire Dishwasher Drain Hose functionsâ as the hydraulic link between the dishwasher âŁdrain pump and the household drain or disposal, âŁconveyingâ wastewater âwhile⢠maintaining⣠pressure integrity and preventing backflow. Designed to handle pulsating flow from the âŁpump, the hose â¤must have an âŁappropriate internalâ diameter and smooth internal surface to limit head loss; undersized or internally restricted hoses increase⢠pumpâ workload andâ can⢠cause incomplete evacuation. âConnection compatibility – matching theâ pump outlet diameter,â clamp or barb fittings, â˘and⣠temperature/material âŁratings – determines whether âthe 807117001 âpart âŁis⣠a direct OEM replacement or requires adaptors for â¤use on other models.
Hydraulically,the⤠hose both âtransmits steady âflow and damps transient pressure spikes during the â¤drain cycle; â¤routing and installation dictate â˘whether the system will âŁsiphon,vent air properly,or trap water. Practical failure modes include clogs from food particles, kinks thatâ raise local head lossand deteriorated⣠ends⢠that leak at fittings;â remedies include â˘clearing â¤obstructions, restoring a⤠smooth run with a â high⢠loop âŁor installing an air gapand⤠replacing hosesâ that show â¤cracking or collapse under suction. Typical specification features âtechnicians check when replacing or troubleshooting a drain âhose include:
- Inner â¤diameter: affects flow capacity⤠andâ pump load
- Length and flexibility: influences routingâ and potential forâ kinks
- Material and âtemperature rating (e.g., EPDM or reinforced âPVC): determines chemical and heat resistance
- Connector/fitting type:â ensures â¤a secure seal⤠at pump and drain â˘connections
How the 807117001 frigidaire Dishwasher Drain Hose operates within the pump,â air⣠gap and⣠household drain circuit
The 807117001 Frigidaire Dishwasherâ Drain Hose carries discharge from⤠the dishwasher’s circulation pump to the household âdrain system,⣠typically routing either to an âŁin-sink air gap, directly to a garbage disposalorâ to a sink tailpiece. âThis hose connects to the pumpâ outlet âwith a clampedâ barb⤠fitting and terminates at âthe air âgap or disposal inlet; it must remain flexible enough to âabsorb pump pulses while resisting detergent,heat,and grease exposure. In practicalâ installations the hose diameter⤠andâ clamp type should matchâ the pump and drain fittings on the⣠specific Frigidaire model,⢠and installers⢠frequently â¤enough remove â˘a disposal⢠knockout âŁplug or secure âthe hose to⣠an⢠airâ gap body to maintain a code-compliant âbackflow âbarrier.
Within âthe pump-air gap-household drain circuit the hose is a⤠passive conveyance that must be routed and â¤supported to prevent â¤siphoningâ and allow the air gap to function. The pump âŁgenerates âshort pressure pulses to evacuate wastewater; âŁthe air gap interrupts âany potential backflow from âŁthe sink or disposal⢠and theâ hose must maintain an elevated high loop or connect to an âair gap above â˘the flood rim level to ensure proper operation. â¤Typical service symptoms tied to the hose⢠includeâ slow draining (partial blockage or kinking), leaks⣠at compression/clamp points (loose⣠clamp, split hose)and gurgling at the sink (clogged air gap or âdisposal).Regular inspection for bends, soft spotsand secure clamps reduces failures âand ensures compatibility âwithâ the ârest âŁof â˘the drain circuit.
- Function: transfer pump discharge to air gap/disposal;⣠resist heat and chemicals.
- Behavior:â mustâ be looped â¤or routed to air gap to prevent siphoning/backflow.
- Compatibility:⣠match hose⣠diameter and clamp style â¤to Frigidaire pump âoutlet and local drain fittings.
- Common issues: kinks, blockages, â˘clamp⣠failuresand improperâ routing that defeat the air gap.
| Item | Description |
|---|---|
| Material | Flexible rubber/PVC blend⢠resistant â˘to detergent and hot⤠wastewater |
| Connection | Barb fitting â˘with hoseâ clamp âŁto pump⢠outlet; terminalâ connects to air gap or disposal inlet |
| Role in system | Conveys discharge, absorbs pumpâ pulsation, âand must preserve air âŁgap/backflow protection |
| Commonâ failure âmodes | Kinking,⤠internalâ clogging, clamp leaks, abrasion where â¤routed against sharp â˘edges |
| Service tips | Maintain a â¤high loop or use an air gap, inspect clamps andâ hose â˘condition annually, clear disposal/air gap blockages |
Common⤠failure symptoms, flow-restriction indicators and diagnostic tests for drain hose⤠faults
Theâ drainâ hose⢠serves as the âfluid â˘conduitâ that carriesâ discharge from the dishwasher pump âŁto âthe household drain or garbage disposal; the 807117001 Frigidaire Dishwasher Drainâ Hose âisâ an OEM replacement designed âŁto mate with the Frigidaire pump outlet and standard âsink tailpiece/disposal âfittings. Proper compatibility requires â¤correct inner diameter, length â˘and connection type-many models⢠use a smooth-boreâ section near âthe pump to reduce clogging and a corrugated section for routing flexibility.⢠Functionally the âhose must maintain an⣠open internal bore and a consistent wallâ profile: softening, internal collapse, abrasion âŁor âhardâ cracks change flow characteristics, âcreate pockets âfor food and soap residue to accumulateand can allow slow leaks âor odors even if â˘a âvisible breach is not present.
Commonâ failure symptoms include âslow drainage, standing water in the tub, â˘gurgling noises when the sink âis usedandâ water⣠backing âinto âthe sink; theseâ signsâ usually â˘indicate flow ârestriction, a failed check âvalve/air gap connectionor⢠a collapsed hose section rather âthan an electrical pump⤠fault.⤠Diagnostic tests⢠are straightforward:â visually inspect for kinks, âabrasions, cracks and brittle âsections; disconnect the hose âat the pump or disposal and flush with a â¤garden hose to confirm unobstructed flow or to locate a partial blockage; âcheck for proper â¤routing and secure clamps â¤to â¤rule out siphoning âor â¤backflow; time the volumetric discharge⢠during a pump⤠cycle âto quantifyâ reduced âflow. If flushing fails âto restore full flow âor if the hose wall collapses under vacuum,replacement is the recommended corrective action because⤠internal deterioration cannot be reliably repaired.
- Symptoms: slow drain, standing⤠water, gurgling, âsink backflow, intermittent leaks, persistent⢠odors.
- Visual tests: inspect for kinks,â soft/swollen areas, cracksand loose clamps at pump and disposal connections.
- Flow tests: disconnect and flush with water, use compressed air to verify full-bore passageor time discharge volume during pump âoperation.
- Connection checks: verify â¤air gap or⢠disposer knockoutâ is âŁclear and that anti-siphon routing is maintained.
| Item | Description |
|---|---|
| Visual inspection | look for âexternal damage, brittleness, crimpsorâ clamp failures âat both ends. |
| Flush/flow test | Disconnect andâ run waterâ through hose to detect partial blockages âor reduced âŁbore. |
| Air⣠gap/disposal⣠check | Ensure the â˘air⤠gap and garbage disposal inlet are âŁclear;â sink backflow often traces to these points. |
| Replacement âŁcriteria | Replace if internal collapse,⤠persistent âblockage âafter flushing, crackingor leaks are found. |
Compatibility matrix, replacement âspecifications and installation considerations âŁfor 807117001 Frigidaire Dishwasher Drain Hose
The 807117001 Frigidaire Dishwasher Drain âŁHose carriesâ wastewater from â¤the dishwasher pump to⤠the â¤house⤠drain, garbage disposalor sink âtailpieceâ and must match the pump âoutlet geometry and destination fitting to function âcorrectly. Compatibility â˘depends on hose inner diameter, connector âŁstyle⣠(barb, slip-fit,⢠or threaded adapter), clamp typeand overall length; these parameters determine sealing performance â¤and flow â¤capacity. The hose material must resist typical dishwasher temperatures and â¤detergent chemistry while â¤remaining flexible enough to avoid kinking; a hose that is softened, âcracked, â˘or permanently deformed will leak or restrict flow and â¤should be replaced with a part that meets the same connector profile and service âtemperatureâ range.
Whenâ replacing this component,â verify the pump outlet profile⣠and âmeasure the hose inner diameter and exposedâ barb âlength ârather than relying solely on model fit âlists-manyâ fitmentâ problems are caused by mismatched connector geometry or insufficient clamp contact âŁarea. During installation, route the hose â¤to maintain â¤a gentle curvature, secureâ itâ to prevent vibrationand â˘provide a high â˘loop or air gap in⣠accordance with local⤠plumbing codes to prevent backflow; avoid routing near âthe dishwasher heating⣠element or âsharp edges. After â¤installation run a âfull drain cycleâ and inspect âall⣠joints âfor leaks⤠and any signs of slow draining or siphoning, which indicate âeitherâ an improper seal or âŁan âŁincorrect routing height.
- Verify dimensions: ⣠inner âdiameter, âŁhose⤠lengthand barb/profile â˘match.
- Clamp selection: â use stainless worm-drive or crimp âŁclamps âsized for the⣠hose.
- Routing: maintain⢠a high loop or air âgap; âavoid⤠tight bends andâ heat sources.
- Condition checks: replace if soft, brittle, pinholedor collapsed.
- Testing: run a drain cycle and inspect for leaks and â¤proper flow.
| Item | Description |
|---|---|
| Inner diameter | measure⤠the hoseâ ID at â˘the pump outlet to ensureâ correct flow and clamp fit. |
| Connector type | Identify â˘pump outlet asâ barb, âslip-fitor threaded⤠to select compatible hose end. |
| Routing requirement | Provide a high loop or â¤air gap and avoid contact with âheat sources or⣠sharp edges. |
Q&A
What is part 807117001â for⣠Frigidaire âdishwashers?
807117001 is the OEM replacement⢠drain hose assemblyâ used on many Frigidaire (and some Kenmore) dishwasherâ models. It connects the dishwasher’s drainâ pump âŁoutlet to âthe household âdrain â(standpipe),⣠air gapor garbage disposal and carries wastewater out of âthe appliance.
how do âI âknow if 807117001â is compatible âwith my dishwasher model?
check your dishwasher’s model⤠number (usually on âtheâ tub rim or door frame) and cross-reference it with the part listing⤠from Frigidaireâ or an authorized parts dealer. Many â¤part listings will show aâ list of compatible⣠models. Ifâ in doubt, provide the exact model number to the⣠parts supplier âto confirm⢠fit andâ connector type.
What are common â˘signs âŁthe 807117001 drain hoseâ needs to beâ replaced?
Signs include visible cracks or âsplits in the⤠hose, persistent leaks â˘under orâ around the dishwasher, dishwasher⤠not draining or slow draining, bad odors that don’t clear after cleaningor a hose that has collapsed⣠or⣠kinked and âŁwon’t hold âits⢠shape.
Canâ I repair the â¤807117001 hose âor âshould I replace it?
minor issues like a loose connection or âaâ smallâ clamp âleak⣠can sometimes⤠be âŁfixed by re-tightening or replacing âthe âŁclamp.However, cracks, meaningful wear, collapsed/flattened sectionsor internalâ damage require full replacement.⣠Replacing the â˘hose â¤is the reliable⢠fix and inexpensive compared withâ repeat repairs orâ water damage.
What tools and âsafety â˘steps are required to replace the 807117001 drain hose?
Turn off⣠power to the dishwasher and shut off â¤water to the âsink area. Tools typically needed are pliers (for hose clamps), a screwdriver, âand possibly â¤aâ bucket orâ towels to catch water. Disconnect the âhose⣠from the dishwasher pump âand from the⢠disposal/standpipe/air-gap, remove old âclamps,â install the ânew hose with proper clampsandâ secure the âŁhose to prevent kinks. Restore power and water and test for â¤leaks.
Any special installation requirements for the 807117001 drain hose?
Yes. The hose must be routed to create a high⣠loop (secured as⢠high âas possible under the sink) or connectedâ to an air gapâ per âlocal plumbing codes toâ prevent backflow. Ensure the hose is â˘not kinked or crushed, securely fasten both ends with â¤appropriate clamps,â and âifâ connecting to a garbage disposal,⣠confirm the â¤disposal knockout⢠plug was removed âŁbefore attaching the hose.
How do I clearâ a clog in the 807117001 drain hose?
First, disconnect⤠power and place a bucket âŁunderâ the connection. Remove the hose from theâ dishwasher or disposalâ and flush it with water. Useâ a flexible brush or a length⤠of plumber’s â˘snake to⤠dislodge debris; avoidâ chemical drain cleaners that can damage plastic. Check the pump outletâ and the disposal inlet for blockages as well. Reattach âand test.
Is⤠it âbetter to buy the OEM 807117001⢠or an aftermarket drain hose?
OEM (Frigidaire) â¤parts like 807117001 âare designed âto matchâ the original â˘hose’s fittings,⢠length,⣠and âmaterialâ and are generally recommended for fit and reliability. Many âaftermarket hoses can work if they match the correct diameter, fitting⢠typeand length; however, confirm compatibility⤠and use quality clamps. â˘For best results âŁand â¤warranty⣠peace of mind, choose the OEM part when available.
To Conclude
The 807117001 Frigidaire â¤dishwasher drain hose is a fundamental âcomponent thatâ directs wastewaterâ from the âtub to the household â˘drain, helps prevent backflowand contributes to consistent drainage performance. As a wearâ item exposed toâ heat, detergent and debris, its condition directly affects â¤cycle⤠completion, âŁhygiene and â¤the riskâ of⤠leaks or water damage; âŁa properly functioning âdrain â˘hose therefore plays an crucial role⣠in â˘overall dishwasher reliability.
Accurateâ diagnosis âof⢠drainage problems-identifying issues such as blockages,â splits, âkinks or âimproper routing-is essential before âŁdecidingâ on repair or replacement. When replacement is required, using the correct âŁpart and âensuring proper installation âhelps restore performance andâ reduces the likelihood of recurring problems. If a diagnosisâ or installation is âuncertain, seeking qualified service âcan prevent improper repairs and potential⤠appliance or home damage.
Regular inspection and â¤timely, appropriate â¤replacement âof the â˘807117001 drain hose support safe, efficient operation and extend the⤠effective life of the dishwasher. Addressing drainage â¤concerns promptly⤠and with âŁthe correct â˘parts and procedures preserves performance, minimizesâ riskand contributes to dependable â¤longâterm use.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
