A00126501 Frigidaire â˘Dishwasher Drain Pump and motor Assembly isâ a combined electromechanical unit comprising a compact electric motor directly coupledâ to a centrifugal pump (impeller)â designed to⢠remove wash and rinse water from a dishwasher âtub. As âa replaceable service assembly it âŁintegrates â¤the pump housing, sealing surfaces, mounting points and electrical connection interfaces used âŁin Frigidaire built-in dishwasher models.
Within the appliance âthe drain pump and motor assembly performs the mechanical work of evacuating water duringâ the drain portions of âŁthe wash cycle, working⣠in concertâ with the control board, drain solenoid or valve logic, water-level/float devices and⣠the drain hose/check valve network. It isâ typically â˘installed âŁinâ the lowerâ sump area of the dishwasher âŁand connects to the drainâ hose or garbage disposal inlet;⢠its correct operation is⣠necessary to preventâ standing waterâ in the âŁtub, to ensure âproperâ cycle timing âand to avoid overflows or contamination between⣠cycles.
This article explains how the A00126501â assembly functions, â˘how to confirm⢠compatibility with specific Frigidaire â¤models, common failureâ symptoms (for exampleâ non-draining, unusual noise, leakage or intermittent operation)and systematic troubleshooting checks a technician or owner can perform. âIt also covers practicalâ replacement considerations such as verifying âpart numbers and electrical characteristics, inspecting and â˘replacing gaskets and clamps, handling theâ wiring harness and mountingâ hardwareand safety precautions (power isolation and water removal) to follow⢠before service.
Table of Contents
- Functionalâ role,⣠electrical âratingsand mechanical specifications of the dishwasher âdrainâ pumpâ assembly
- How the A00126501 Frigidaire dishwasher Drain Pump andâ Motor Assembly integrates with plumbing, control â¤electronicsand sump âŁmechanisms
- Common failure symptoms, diagnostic indicators,â and root-causeâ testing procedures
- Compatibility, replacement-part selectionand installation considerations âfor service⣠and fitment
- Q&A
- In Conclusion
Functional role, electrical ratings,â and mechanical specifications of âtheâ dishwasher drainâ pump assembly
The A00126501 Frigidaire dishwasher Drain Pump and⣠Motor Assembly comprises an electric motor directly coupled to an impeller and a molded housing⤠that routes wastewater from the tub to⤠the drain hose.In operation the motor converts mains electrical⢠energy into torque to drive the impeller; hydraulic flow and pressure are low⣠compared with circulation pumps but âsufficient toâ overcome gravity and trap backpressure. Compatibility dependsâ on â¤the pump’s â¤mounting flange, shaft orientation,â and electrical connector, so confirm the A00126501 part number against the âdishwasher model and note the housing seal and hose diameter when installing.⣠practical replacement scenarios include persistent standing water after a wash cycle, a â˘humming motor with no âŁwater movementor leakage at the pump housing âor sealâ surfaces.
Electrically the assembly is designed for standard household supply and typically âspecifies a nominal mains voltage and frequency; â˘confirm⢠the exact⤠rating on the service tag before testing. â¤Expected⤠behavior underâ normal⣠load is a steady running current âin the lower-amp â˘range with âŁan internal thermal cutoff or overload protection to prevent motor damage fromâ stall conditions. Mechanically the assembly integrates a molded impeller⢠and molded ports; common service checks are verifying continuity across the motor âwindings, measuring running current with a⣠clamp meter, âand⢠inspecting âthe impeller andâ inlet for debris. use the list âŁand reference table below to check theâ key interface and electrical parameters⣠when diagnosing or ordering a replacement.
- Key⤠interfaces: mounting⣠flange⢠pattern, hose inlet/outlet diameterand⣠rapid-disconnect electrical terminals.
- Common fault symptoms:â noâ drain âwith motor silence, motor âhum withâ no impeller rotationor visible leakage at â˘the housing/seal.
- Service checks: continuity and⢠insulation resistance checks, clamp-meter running-current â¤measurementand mechanical clearance⢠inspection of the impeller.
| Item | Description |
|---|---|
| Voltage | Nominal household⢠mains (refer to pump nameplate; commonly 120 VAC in North America) |
| Frequency | 60 âŁHz (confirm regional rating on label) |
| Typical running current | Lower-amp â˘range; varies by model and load (measure âon-site toâ verify) |
| Mounting | Flange-mounted housing â˘with model-specific bolt pattern and âgasket seal |
| Drain port | Integrated hoseâ barb sized⣠for dishwasher drain hose (verify inner diameter before replacement) |
| Electrical connector | Quick-disconnect terminals (usually â2 or 3 terminals depending on integrated sensors/ground) |
How the A00126501 Frigidaire Dishwasher Drain Pump and Motor Assembly integrates withâ plumbing, control electronicsand sump mechanisms
The A00126501 Frigidaire Dishwasher Drainâ Pump and Motor Assembly mounts directly to the dishwasher sump and provides the âhydraulic pathway that evacuates wash water to the household drain.â Theâ assembly’s impeller âpulls âwater from the sump chamber through âthe inlet strainer and forces it out the discharge spigot, where a flexible drain hose and often a oneâway check valve complete the plumbing interface.⤠Mechanical⣠compatibility depends on the pump’s flange/mount geometry, gasket or âŁOâring sealsand the orientation of the discharge spigot; these determine âwhether the unit seals âcorrectly to the sump and whether theâ hose can be routed âwithout kinking or air âtraps. In practical service, a⢠technician should verify âŁthat theâ pump housing seats flush against the sump,⢠thatâ the strainer is clear of debrisand that any factory check valve is installed in the correct direction to âprevent⢠backflow into the sump between drain cycles.
- Mechanical: flange â¤mounting, sealing surface, impeller clearance and antiâsiphon/check valve⣠interface
- Plumbing:⤠discharge spigot to flexible hose⣠routing, clamp locationsand⣠drain loop â¤height
- Electrical: â¤terminal/connector type, switched supply⤠from⤠the control boardand â˘an internal thermal â˘protector
- Control behavior: simple on/off switching â¤by the âcontrol â˘PCB; diagnostics rely on current draw and absence/presence âof expected flow
- Troubleshooting â˘indicators: voltage at terminals withâ no âflow (mechanical jam orâ impeller damage); â¤motor runs âbut âslow or noisy (blockage orâ worn bearings)
The electrical integration of the A00126501 assemblyâ is typically â¤aâ lowâvoltage or mainsâswitched connection âprovided by the dishwasher âcontrol board; the board supplies power only during the drain phase and âŁmay monitor current draw to detect faults. Because different Frigidaire â¤models use varied harnesses and connectors, â˘confirm â¤that the replacement pump’s âterminal layout and mounting â¤tabs match the original before installation to avoid miswiring⣠orâ mechanical interference.In service⢠scenarios, measureâ for expected⢠supply voltage at the harness during a drain cycle-if voltage is â¤present but the pumpâ does not evacuate water, inspect the â¤impeller and sump passage for obstructionsand âcheck the discharge hose âand checkâ valve for clogs or â˘kinks that would degrade performance despite a â˘functional motor.
| item | description |
|---|---|
| Mount interface | Flange/Oâring seating âŁto sump; must align âŁto avoid leaks |
| Discharge connection | Spigot for flexibleâ hose; ensure clampsâ and routing prevent sagging |
| Electrical connector | Modelâspecific terminals; verify polarity and âpresence of thermal protector |
| Common fault âŁsignatures | No voltage (control/PCB), âvoltage/no flowâ (mechanical blockage), flow/no â˘drain (hose/check valve issue) |
Common failure â˘symptoms,⣠diagnostic indicatorsand root-cause testing procedures
The A00126501 Frigidaire Dishwasher Drain Pump and Motor Assembly â˘is the â˘combined motor and centrifugal impeller unitâ that evacuates wash⣠and rinse water from the⣠tub â¤during the drain portion of a cycle. Inâ correctly functioning units the motor âproduces smooth rotational torque to drive âŁthe impeller inside âa sealed pump housing;⣠failure modes can be electrical (open âŁwindings,â connector faults), mechanical (impeller jam, bearing wear, â˘shaft⢠seal failure)or âŁsystem-level (blocked âdrain âhose,⤠air âŁgap restrictionorâ control-board faults). âTechnicians should confirm âmodel compatibility and connector pinout â˘before replacement, sence mounting bracketsâ and wiring harnesses differ across Frigidaire model families and incorrect fitment can produce recurrent faults.
Diagnostic⤠indicators used to isolate root cause include audible symptoms, electrical measurementsand mechanical inspection. Begin by isolating power and performing a visual check â˘forâ debris⣠or impeller damage,⤠then place the dishwasher in a drain/serviceâ mode to â˘measure â˘supply voltage at the pumpâ connector; next, verify motorâ winding continuity and resistance with a multimeter and âcheck that the impeller rotates freely⢠when driven or turned by âhand (with power removed).â If the pump receives the correct control voltage but the impeller is⤠seized or bearings â¤are noisy, the pump assembly requires replacement; ifâ the motor is âelectrically openâ or shorted,⢠replacement is required as well. If âŁno â¤voltage is present at the pump, traceâ upstream to âŁthe door⤠switch, drain relay onâ the⣠control âboard,â or â˘wiring âharness for intermittent contacts or âfailed components.
- No drain but motor âhums – check for foreign object⤠in impeller,⣠measure voltage at pump, verify impeller free rotation.
- Complete electricalâ failure at⤠pump – test â¤for continuity of windings and âinspect connectors for corrosionâ or broken wires.
- Intermittent draining – inspect âharness crimps, control-board drain relay operationand⣠diagnostic/error codes.
- Leaks around pump housing – inspect housing for â¤cracks, â¤check â¤seals and mounting fasteners, verify âcorrect pump orientation.
| Item | Description |
|---|---|
| Voltage during drain cycle | Should match the appliance nominal supply (typically 120â VAC âŁin North America); absence of voltage indicates upstream controlâ or wiring â˘fault. |
| Motor⣠winding continuity | Lowâ resistanceâ between â˘motor⢠leads indicatesâ intactâ winding; open or very high resistance indicates a failed motor⢠that requires â¤replacement. |
Compatibility, replacement-part selection,â and installation considerations⤠for⣠service⤠and â¤fitment
A00126501 Frigidaire dishwasher Drain Pump and Motor Assembly is an integrated⣠pump âand motor module⤠that evacuates⣠wash and rinse water from the dishwasher sump under âelectronic control. Compatibility depends on physical⢠mounting,â electricalâ connector typeand hydraulic interface: the pump housing flange,⣠bolt pattern, âinlet/outletâ diametersand impeller â¤orientation must match the chassis⤠and hose routing of⢠the host model. Functionally, the motor is energized during drain cyclesâ by the control board and may run⢠intermittently for timed intervals; a mismatched assembly can run but produce inadequate â˘flow, excess noiseor sealâ failure if shaft length, impeller âclearanceorâ electrical⣠characteristics differ. Before ordering a replacement,compare the service part number,harness âconnector,and the positionâ of⢠the discharge port against the installed unit.
- Verify â˘OEM cross-reference and model compatibility using the dishwasher model number andâ the pump’s part label.
- Checkâ electrical connector type and voltage rating on â¤the motor nameplate to match⤠control-board outputs.
- Confirm⢠mounting bolt pattern, gasket â˘face âdimensions, âand outlet hose diameter for proper fitment.
- Inspect âŁimpeller clearance and seal geometry; seals and clamps should be replaced during install.
installation requires basic mechanical skills and electrical safety.â De-energize the appliance and drain residualâ water before removing the lower access panel; support âŁtheâ sump while unbolting the⢠pump to avoid disturbing âsealsâ and âwiring.⣠Replace all sealingâ surfaces and hose â˘clamps, â¤route hoses⣠to â˘prevent kinksand verify⢠ground continuity after âreconnection. After mechanicalâ installation, run a drain⢠cycle and observe flowâ rate and leakage;⢠listen for unusual bearings noise that indicates incorrect coupling or internal damage.⣠In retrofit scenarios a compatible harness adapter orâ minor âbracket modification may be required, but verify motor drive voltage â˘and waveform from the control board to avoid overstressing the motor-when in â˘doubt, match the original part markings rather than relying solely â˘on visual similarity.
| Item | Description |
|---|---|
| Voltage | Typically 120 âŁVAC âŁforâ North American Frigidaire models; verify the motor nameplate before replacement. |
| Mounting interface | Bolt pattern and gasket face must match the sump housing to prevent⢠leaks and misalignment. |
| Hydraulic ports | outlet diameter and âŁorientation âŁdetermine hose fit and routing; âŁmismatchesâ require adapters. |
| Common incompatibility symptoms | Poor drainage, loud bearing noise,⤠leaks at theâ sumpor tripped fuses due to incorrect electrical match. |
Q&A
What are common symptoms of a failing A00126501 Frigidaire âŁdishwasher drain pump and motorâ assembly?
Typical signs include standing âwater in the âŁtub after a cycle, the dishwasher failing to drain, a loud humming â˘or grinding ânoise during âŁthe drain cycle, error codes related to âŁdrainingor visible⢠waterâ leaking from the âbase. â˘Intermittent draining or unusually long drain cyclesâ can also indicate a failing pump/motor.
How can I test whetherâ the A00126501 drain pump motor is â¤bad?
First disconnect power to the dishwasher. Inspect the pump for visible âdebris or blocked impeller.With the harness unplugged, check the motor âwindings for continuity â˘with a multimeter (you should⣠see continuity, not an open circuit). Check for a short⤠to ground (should be open). If safe to do⣠so and you are⢠experienced, restore⣠powerâ and measure voltage at the â¤pump connector⢠during the⣠drain cycle – in U.S. models you should see âapproximately 120 VACâ when the controlâ calls for drain.If voltage is present but the motor does not run,â the motor is faulty. If â˘there⣠is no voltage,the â¤problem âŁis upstream (control board,float switch,door switch,or wiring).
Can I âreplace only the motor or do Iâ need to⤠buy the whole A00126501 assembly?
A00126501⣠is typically sold âas a combined drain pump and motor assembly.⣠While some technicians⢠can rebuild âŁor⤠replace just the motor, manufacturers frequently enough design âthe parts â˘as sealed assemblies and replacement of the entire assembly is recommended for⣠reliableâ results and to ensure seals and impeller alignment are correct.
How do I know ifâ A00126501 is compatible âŁwith my Frigidaire dishwasherâ model?
Check the âŁdishwasher â˘model number (usually on the inner door frame or tub âŁedge) and crossâreference it with the part listing â¤fromâ Frigidaire or an authorized⣠parts retailer. Parts compatiblity lists⢠will show which model numbers accept â¤A00126501. If unsure, âprovide the full⤠model number to the â¤parts â˘supplier or consult your â¤service manual before purchasing.
What tools and safety steps are required to replace the A00126501 drain pump and motor assembly?
Required tools: â˘screwdriver⣠set (Phillips⢠and flat),nut⣠drivers,needle-nose pliers,pliers for⢠clamps,bucket/towels,and optionally a multimeter. Safety steps: disconnect electrical power at the â¤breaker,â turn⤠off â¤the⣠water supply and drain â¤remaining waterâ from the dishwasher, remove âthe lower kick âpanelâ or toe plate, âand follow the âservice manual for removing access panels. When disconnecting hoses,have a towel or container âready. Reinstall gaskets and clamps securely and check for leaks before putting panelsâ back on.
How long doesâ it typically⣠take to replace the drainâ pump/motor⢠assemblyand is it a job for a homeowner?
Forâ a moderately skilledâ homeowner the âjob usually takes 30-90 minutes. It is considered a medium-difficulty ârepair: accessible â˘on many⣠models via the âŁtoe-kick or by⣠tipping the dishwasher forward, but it â˘requires basic mechanical skills, attention to wiring/hose connections,⣠and âsafe handling of â¤electrical components. If âyou are uncomfortable working with live circuits âor removing the appliance, hire âŁa qualified technician.
After installing a new A00126501 assembly the dishwasher still âwon’t drain or is noisy – what âcould âŁbe wrong?
Possible causes: â¤the new pump â˘could be obstructed by â˘foreign debris, the⤠drain hose or sink/disposal might potentially be clogged, the garbage disposal knockout plug may still be installed, theâ check valve could be stuck, wiring or connectors may be looseor the⣠control board/relay not supplying power âto the pump.For noise, ensure the impeller is undamaged andâ mounting grommets/seals are correctly⢠installed. Recheck electrical â¤connections, clear the drain hose and disposaland verify âŁthe⣠control calls for drain with a â¤voltage check.
Does A00126501 come⢠with a warranty and where should I buy â˘it toâ ensure authenticity?
Warranty terms vary by⢠seller; OEM parts bought from Frigidaire or an authorized parts dealer usually include a⢠manufacturer warranty (often limited). âTo â¤ensure â˘authenticity and warrantyâ coverage, purchase from Frigidaire directly, an authorized dealeror a reputable appliance parts supplier. â¤Keep â¤your receipt and the dishwasher model number for warranty claims and⤠returns.
in summary
The A00126501 Frigidaire dishwasherâ drain pump and motor⣠assembly plays âa central role⣠in â˘the appliance’s wash cycle by reliably removing wash and rinse water from âthe⤠tub. Proper operation of âŁthis component helps prevent standing water,reduces the risk of odors and residue â¤buildup,and supports overall cleaning performance. Because the pump interfaces with both the dishwasher’s plumbing and electrical systems,its condition directly affects â˘efficiency,safety,and service life.
Accurate diagnosis is essential when drain problems orâ unusualâ noises are detected.Identifying âwhether an issue âstems from obstructions, electrical faults, worn bearingsor the pump itself avoids unnecessary parts replacement and ensures the underlying cause⤠is addressed. Professional testing or methodical troubleshooting⣠helps⢠confirm âŁthat A00126501 âŁis the âcorrect⣠corrective component âŁand that any related issues-such as clogged âdrains âor faulty controls-are resolved concurrently.
When replacement is⣠required, âtimely installation of the appropriateâ pump and motor assembly restores dependable drainage and reduces the likelihood of secondary damage to âthe dishwasher. Using the â¤correct part and following recommended installation and safety practices-either through qualified technicians or according âto manufacturer guidance-supports long-term performance â˘and reliability. Regular maintenance and prompt attention âto symptoms will help maintainâ dishwasherâ functionality and âextend the⣠service life of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
