WD24X10014 GE Dishwasher Drain Hose â¤is a âflexible â¤wastewater⤠discharge â¤hose designed for use⢠on GE⣠built-in dishwashers; it âserves as⤠the⣠conduitâ between the dishwasher’s internal drain pump/sumpâ assembly and the household drain âconnection (air â¤gap, garbage disposalor sink tailpiece).â The component is âŁtypically formed from⤠heat- and chemical-resistant⣠elastomeric or thermoplastic âmaterial with hose-barb â¤or slip-fit ends and is intended to withstand⤠elevated water temperatures,detergents,and repeated flexing âwhile maintaining aâ leak-tightâ connection.
Inside⣠the⣠appliance system⢠the drain hoseâ conveysâ effluent expelled by the dishwasher âŁdrain pump to âthe external âplumbing while preventingâ backflow into the sump. It⣠interfaces directly âŁwith⣠the pump â¤outlet, any âin-line check valve or anti-siphon deviceand the sink-side fittings (air gap, disposal inlet, P-trap). â˘Proper hose diameter, length, routing⤠and secure clamping âare critical toâ maintain âŁgravity-assisted⢠drainage, avoid kinks or sags âwhere solids can collect,⤠and to limit the potentialâ for⣠leaks or cross-contamination; material compatibilityâ and temperature rating also affect long-term â˘durabilityâ under⢠chemical and âthermal stress.
this article will describe the âWD24X10014’s functional âcharacteristics and typical installation âlocations, âoutline how to determine compatibility with a given dishwasher model, list common failure symptoms (slowâ draining, standing water,⣠leaks⢠under the âcabinet, odor orâ error codes)and present practical troubleshooting steps.⤠It will alsoâ cover â˘replacement âconsiderations such âas measuring⤠length and inner diameter, identifying proper end âfittings and â˘clamp⤠types, â˘recommended material and temperature⢠ratingsand basic safe âŁprocedures for removal âand âreinstallation to help technicians, âengineers,â and appliance owners make informed repair decisions.
Table of Contents
- Function â˘and Role of⤠the âŁDishwasher Drain Hose â¤in Wastewater Evacuation and Backflow Prevention
- How âŁthe WD24X10014 âGE Dishwasher Drain Hose⣠Integratesâ with the Pump, Check Valve andâ Air Gap
- common Failure Symptoms: Leaks, Kinks, Blockages and⤠Diagnostic⣠Indicators
- Replacement Considerations and Installationâ Requirements: Hose Routing, â˘Clamps, âŁLength and Sealâ Specifications
- Q&A
- In summary
Function⢠and role of the Dishwasher drain Hose in⤠Wastewater Evacuation⤠and âBackflow Prevention
The WD24X10014 GE âDishwasher⢠Drainâ Hose âserves as the flexible⣠conduit that carries wastewater from the âdishwasher’s discharge pump to â˘the household drain or garbage disposal. Constructed from abrasion- and temperature-resistant âŁflexible material,the hose must tolerate â¤short-duration high-temperature discharges,detergent chemistry,and pulsating pump pressure while â˘maintaining an open flow path. Proper routing with a continuous downward slope and⢠secure mechanical connection (hose clamp or âOEM push-fit) prevents standing water inside the âline âŁand reduces âŁthe ârisk of leaks where the hose joins the â¤appliance or drain fitting.
The drain hose also influences backflow control but does not inherently âŁprovide⢠a completeâ barrier against contaminated siphoning; backflow prevention is achieved by âinstallation configuration and additional components. Aâ high loop routed to the underside of the countertop or a certified air⢠gap device âmust â¤be used to break a siphon and meet âcommon plumbing codes; âŁsomeâ replacement hoses â˘include an integrated check valve,⢠which can help reduce âsiphoning but should not replace a required air gap. When replacingâ orâ evaluating a drain hose, check for soft âspots, kinks, internal⤠cloggingor deterioration at connector endsand confirm âŁthat⣠the hoseâ diameterâ and connector style matchâ the appliance⢠discharge and the downstream inlet to ensure compatibility and reliable â¤operation.
- Common indicators â˘of hose or installation problems: slow draining, dishwasher backflow into sink, visible leaks at fittings, âor unusual odors from⢠trapped⣠wastewater.
| Item | Description |
|---|---|
| primary âfunction | Convey⤠wastewater fromâ dishwasherâ pump to drain while âwithstanding heat, â¤chemicalsand pressure pulses |
| Material/behavior | Flexible, chemically resistant polymer designed for repeated hot-water exposure âand flex cycles |
| Compatibility | Requires matching hose diameter andâ connector type âfor dishwasher⢠outlet and sink/disposal inlet; clamps âor OEM fittings âsecure the joint |
| Backflow⣠control | Implemented by routing (high loop), an air âgap deviceor a check valve in the âsystem; âhose alone is not a âcode-compliant backflow barrier âin many jurisdictions |
how the WD24X10014⤠GE Dishwasher Drain Hoseâ integrates with the Pump, Check Valve and Air Gap
The WD24X10014 GE Dishwasher Drain Hose serves as the flexible conduitâ that carries⢠discharge from the dishwasher pump to either an in-sink âŁair gap, disposeror household drain. It attaches to â¤the âpump discharge fitting with a hose clamp or⢠fast-connectand âŁitsâ internal diameterâ and wall⢠stiffness areâ chosen to withstand the intermittent âŁpressure pulses generated by the pump without â˘collapsing or ballooning. Proper mechanical âmating at⤠the pump â¤outlet and⢠correct hoseâ routing are â¤necessary for consistent flow rates; âmismatched fittings,⣠lose clampsor sharp bends can â˘introduce backpressure that â˘increases⢠pumpâ work and â¤raises the⢠risk of residual water⣠remaining in the tub.
The hoseâ works⢠as part of a system: the pump creates positive⣠pressure to âexpel wash water; a ⣠check valve (when âpresent inline or at the pump)â prevents⢠gravity-driven return â¤flow when the pump âis off;⣠and⣠an air âŁgap âor high loop â¤prevents siphoning of sink water âback⢠into theâ dishwasher.Install and service checks should verify clamp tightness at the pump, correct orientation of any check valve (arrow pointing away⣠from the pump)and either a vertically mounted air gap or âa high âloop aboveâ the sink flood ârim. Practical diagnostic signs of⣠integration problems include gurgling at âthe âsink âŁ(air gapâ obstruction), slow âdrain with standingâ water (kinked hose or⢠clogged check valve)and intermittent⤠leaks at the pump-hose junction (loose clamp âor worn fitting).
- Installationâ checks:⣠clamp âŁsecure, hose free of kinks,⢠check valve oriented correctly, hose routed to âair gap or⣠high loop.
| Item | Description |
|---|---|
| Pump discharge | Source of pressurized⢠wastewater; hose must seal to the pump outlet to prevent leaks⤠and backpressure. |
| Check valve | One-way device placed in-line âor at âŁthe hose to prevent gravity backflow âwhen pump is off; orientation is critical. |
| Air â¤gap | Atmospheric break mounted above sink or âŁa high loop that prevents siphoning of contaminated sink water into the dishwasher. |
| Hose fittings / clamps | Mechanical connection points that must match diameterâ and âbe tightened⢠to maintain aâ leak-free joint under pump pulses. |
Common Failure Symptoms: Leaks, Kinks, Blockages and Diagnostic Indicators
The â WD24X10014 â¤GE â˘Dishwasher Drain Hose is a⤠reinforced, flexible âdischarge⢠lineâ that routes wastewater from⣠the⤠dishwasher pump to âŁthe household drain or disposer.Itsâ function is âŁpassive conveyance of effluent under low pressure, so failures typically result from mechanical damage, improper routing, âor âinternal accumulation rather than wear of moving parts. Compatibility⣠considerations include hose diameter, the location and type of end fittings, âŁand â¤thermal resistance; replacing a collapsed, undersizedorâ mismatched hose withâ the âcorrect⤠WD24X10014 specification restores âflowâ characteristics and prevents⢠backpressure on the pump⣠assembly.In practice, installers must⤠maintain gentle bend radii, secure clamps at both the pump outlet and the â˘sink/disposer connection,⣠and avoid pinch points behind cabinetryâ where the hose can be crushed or abraded against⣠framing or fasteners.
Diagnostics combine visual⢠inspection and simple⤠functional âtests: look for wetness or corrosion⣠at clamp interfaces, inspect the hoseâ along its run for â˘kinks or âflat âspotsand verify full flow by running a drain cycle⢠while observing outlet discharge. Common diagnostic indicators include slow or no drainage, intermittent gurgling â˘noises, standingâ water in the tub, â˘and odors â¤from trapped organic⢠matter; these symptoms help distinguish between an external leakâ (visible wetting or spray), a mechanical restriction (kink âŁor collapsed section)and anâ internal blockage (accumulated food, greaseor mineral deposit). For technicians,a systematic check-disconnecting the hose to â˘inspect for obstruction,straightening suspect runs,and pressure-testing⤠clamps-pinpoints whether⢠the hose itself must⤠be replaced or if the issue lies upstream or downstream of the assembly.
- Visible wetness or pooling under the⢠cabinet – suggests a â¤loose clamp, perforationor split in the hose wall.
- Slowâ draining or standingâ water in the tub â˘- often caused by internal⤠blockage⣠or âan overly long/undersized⣠hose run creating excessive backpressure.
- Audible gurgling or âintermittent drainage – â˘may indicate partial obstruction or an improperly âvented discharge connection.
- Flattened or crimped segments along âthe âhose path – mechanical â˘kinkingâ that restricts⤠flow and âcan lead to pump overloading.
- Foul odor fromâ the dishwasher – trapped âŁorganic material inside the hose; flushing orâ removal and⤠cleaning⣠might âŁpotentially be required.
| Item | Description |
|---|---|
| Leak at clamp | Check âclamp âtorque, condition of hose barbâ and gasketand replace clamp orâ hose⢠if the⤠coupling is corrodedâ or âthe hoseâ end is degraded. |
| Kink/collapse | Inspect routing through cabinets;⢠reroute to eliminate tight bends or replace⣠with correct-length⤠WD24X10014⢠if permanently⤠deformed. |
| blockage | Disconnect âand flush âŁthe hose; remove âŁtrapped food/debris or â¤scale deposits⣠and verify pump discharge âbefore reassembly. |
Replacement Considerations and Installation Requirements: â˘Hose Routing,â clamps,⤠Length and âSeal Specifications
Theâ WD24X10014 GE Dishwasher Drain Hose functions as the primary conduit for wastewater from the appliance toâ the household⢠drainâ and âmust preserve hydraulic⤠flow whileâ resisting heat, detergents and mechanical âwear. âŁWhen replacingâ this hose, match the OEM connection âgeometryâ and inner diameter â˘to ensureâ proper fit âwith the pump outlet and the â¤household plumbing; mismatched diameters âŁincrease⢠backpressure or âleak risk. Route the hose to maintain aâ smooth, âupward â˘high loop or connect to an approved air gap to prevent siphoning into the sewer, âavoid sharp bends that reduce internal âdiameterand keep â¤the hose⣠clear of heat sourcesâ and movingâ parts â˘to âŁprevent â˘premature⢠failure.
Installation â¤must secure the hose mechanically â˘and seal theâ connection toâ prevent leaksâ during high-temperature wash cycles. Use a clamp âŁtypeâ compatible â˘with the hoseâ material and âbarb – âstainless âworm-gear or constant-tension⤠clamps⢠provide reliable compression without cutting âthe hose⤠– and ensure â˘the hose is fullyâ seated on the barb with the clamp positioned over the⢠reinforced section. â˘After installation, â¤run â¤a âŁfull wash cycle while inspecting forâ leaks and verify the routing holds theâ hose in place under vibration; âif the original clamps show corrosionâ or deformation, replace them rather âthan reusing.
- Verify inner âdiameter and connector style against the OEM hose before â˘purchase or reuse.
- Maintain âa high â¤loop or âinstall an air⢠gap to prevent back-siphoning.
- Use âstainless clampsâ sized â˘toâ compress the hose âŁwithout âcrushing;⢠position clamps âover the hose reinforcement.
- Avoid âexcess âlengthâ and tight bends; secure the hose to reduceâ stress from vibration.
- Pressure-test with a full temperatureâ cycle and checkâ for seepage at the âhose-to-barb interface.
| Item | Description |
|---|---|
| Inner⣠diameter | Match âOEM âsize to ensure pump outlet âcompatibility and avoid increasedâ backpressure. |
| Clamp âŁtype | Stainless worm-gear âŁor constant-tension clamps recommended to maintain consistent compression without cutting. |
| Hose routing | High loop or⣠air⢠gap required to prevent⣠siphoning;⢠avoid heat sources and moving components. |
| Seal/engagement | Hose must fully cover theâ barb â˘with clamp placed on reinforced section to ensure a leak-tight âŁjoint. |
Q&A
Isâ WD24X10014 anâ OEM part and which âŁmachines does itâ fit?
WD24X10014 is an OEM GE replacement⣠drain⢠hose. It is intended âfor⢠use on many⣠GE-built dishwashers⢠and may also appear in cross-reference lists for brands GEâ owns (Hotpoint, Profile, etc.). Exact fit⣠depends on the dishwasher âmodel and⤠the connection type at the⣠sink/disposal. Always âŁverify fit by checking theâ replacement parts list for your specific appliance model or the GE Parts webâ lookup before ordering.
How âdo I remove and install the WD24X10014 drain hose safely?
Turn off power âto the dishwasherâ (unplug or trip the circuit breaker) and shut off the sinkâ water if working near⣠the disposal. Place â¤a âtowel âor â˘shallow⣠pan to⣠catch water. Loosen â˘the⢠hose clamp(s) at⤠the dishwasher outlet and at âthe sink trap or âgarbage⢠disposaland slide the hose off each fitting.⣠Install the new hose by pushing itâ fully onto the dishwasher⢠tailpiece and the disposal âŁor sink drain inlet, âsecure âwith âstainless-steel worm-gear clamps, route it to âŁform a high âŁloopâ or toâ the air-gap, restore power, run a short cycle and âcheck⢠for leaks.
Doâ I need an air gap or⣠a high⣠loop when installing thisâ drain hose?
Yes. Moast local âplumbing codes require either â¤an âair gap or a highâ loopâ to prevent backflow into⣠the dishwasher. If you have an air gap installed⣠at the âsink, route the⣠WD24X10014 to the air gap inlet. If you do not have an air gap, secure the hose as highâ as possible underâ the â˘countertop (high loop) before it drops to the â˘disposal or trap. Both âmethods â¤prevent âŁcontaminatedâ sink water â˘fromâ flowing back into the âŁdishwasher.
What are âthe most common reasons the WD24X10014 hose leaks or clogs?
Leaks are usually⣠caused by loose or⢠corroded hose clamps, splits or cracks in the hose, â¤or incorrect seating on the fittings.⤠Clogs commonly âoccur from foodâ debris, broken glass, âor⤠grease buildup in the âhose or the sink/disposal⣠trap. âKinks or sharp âbends⢠in the hose can restrict flow and increase the chance of⤠clogs or⣠water⣠backing up.
How can⣠I â˘clear a clog in the WD24X10014⣠drain hose?
First disconnect the hose (power off, water offand catch any water). Flush the hose âwith â˘water from a garden hose or run⢠water through it from the â˘dishwasher outlet toward⤠the disposal/trap. Use a flexible⢠brush or a length of nylon-coated cable (carefully) to dislodge debris; avoid metal tools⣠that can puncture the hose. do⤠not use â˘harsh â¤chemical⤠drain cleaners⢠in the hose,â asâ theyâ can damage â¤the material and the pump. Reinstall with new clamps and test for proper drainage.
Canâ I extend the WD24X10014 âdrain hose if it is too short?
Yes, but extensions must be done withâ compatible dishwasher-grade hose and a proper âcoupler designed for dishwasher drains. Avoid simply using generic⢠garden hose⢠or⢠plumbing piping.Keep the âdrain run as smooth as possible, maintain the⢠required high âloop or âair âŁgapand secure the splice with appropriate clamps. If âunsure, it’sâ safer⤠to purchase a longer OEM or âŁmanufacturer-approved âreplacement hose.
What clamp âtype and torqueâ should I âuse when securing the WD24X10014?
Use a stainless-steel worm-gearâ hoseâ clampâ sized for the hose diameter and⤠fittings. Tighten the clamp snugly to create a watertight â˘seal but avoid overtightening, which can cut into or deform the hose. â¤A general â˘guideline is firm âhand torque plus a short quarter-turn â¤with a screwdriver; âif you have a torqueâ screwdriver,15-25 in-lbs is a â˘typical range for small hose clamps.Inspect âŁfor leaks after⣠the first⢠test run and retighten slightly if needed.
How do I tell if the drain âhose needs replacing rather than a simpleâ repair?
Replaceâ the hose⣠if you â¤see visible cracks,brittleness,soft spots,permanent âŁkinks,hard blockages â˘that â¤cannot⣠be cleared,orâ if the hose has been cut⣠or abraded.â Also replaceâ ifâ clamps no longer hold due to crushed or deformed hose ends. âIf the hose is in good physical condition and simply âhas a clog â˘or âloose clamp, cleaning and re-clamping might potentiallyâ be â¤sufficient. For reliable â˘long-term⤠performance, âŁOEM replacement âŁis recommended when⤠in doubt.
In Summary
the âWD24X10014 GE dishwasher drain hose plays a essential ârole â˘in directing âwastewater safely and efficiently away from⤠the â¤appliance. as âa purpose-built component, it helps â˘maintain proper â˘drainage flow, prevents âŁleaks and⤠backflow, resists kinking and heat exposure common in dishwasher operationand thereby protects internal components such as the pumpâ and seals. Reliable performance from the drain hose â˘contributes⣠directly to appliance efficiency, hygiene,â and⤠theâ prevention âof water damage to cabinetry and flooring.
Because the drain hose is exposed⣠to mechanical wear, temperature cycles and debris, âroutine inspection and accurate diagnosis of symptoms-such as reduced drainage, visible âŁcracks or bulges, persistent odors, â˘or water⢠pooling-are crucial. Timely replacement with the correct part âŁimproves long-term reliability and âreduces the⢠risk of secondary damage; when in âŁdoubt, following manufacturer guidance⤠or consulting a âqualified technician ensures correct fitment andâ safe installation. Regular attention to⣠the drain hose is a straightforwardâ wayâ to help sustainâ the overallâ performance and âservice âlife of a âGE dishwasher.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
