A122BA⤠whirlpool Radiant Moduleâ Cartridge Blackâ is a modular â¤replacement component used âin âŁelectric ranges and⣠cooktops that employ radiant heating elements. it âis a compact electrical cartridge orâ module designed too fit intoâ the âŁcooktop⢠control assembly, providing âthe âŁswitching and electricalâ connections required âŁto⣠regulate one radiant â¤heating zone.As a â˘service â¤part, it âŁis⣠typically supplied in â¤a protective black â¤housing that matches manufacturer formâ and connectorâ layout for straightforwardâ replacement.
Inside the appliance, the⤠cartridge interfaces between âthe⤠user control (knob⢠or electronic control board) and the radiant heating element or its relay/triac driver, carrying current and âŁproviding⣠the switching function that controls heat output. It â˘interacts with line power,â the range â˘control âcircuitryandâ any local temperature or overheat â¤sensors âŁmounted near the âŁelement; a failure â¤can thus affect the â¤element’s ability â¤to receive power, the accuracy âof control â¤commandsor safety âinterlocks. â˘Typical mounting locations are on â¤the underside of theâ cooktop or â˘within the control⤠console where the âelement wiring terminates, âmaking⤠correct electrical connections⣠and mechanical seating critically important for reliableâ operation.
In this âŁarticle â˘you will âlearn âhowâ the A122BA â˘module functions⣠within the radiant elementâ circuit,how to verify compatibility with specific Whirlpool models andâ electrical ratings,and what commonâ failure symptoms⢠to⤠expect â(such as,loss of heating,intermittent operation,orâ visible⤠damage). The article âalso coversâ practical troubleshooting steps a technician can perform-visual inspection, continuity and resistance checksand isolation testing-as wellâ as safe replacement considerationsâ such as confirming âthe⣠correct part number, matching terminal⢠layouts, disconnecting âpower before âserviceand⣠post-replacement verification procedures.
Table of Contents
- Function⤠andâ electrical roleâ of the radiant module cartridge âin electric Whirlpool ranges
- How the A122BA âWhirlpool Radiant âModule Cartridge black interfaces with control boards,â sensorsandâ heating elements
- Common failure âsymptoms âand measurable diagnostic âŁindicators for the radiant âŁmodule cartridge
- Compatibility, replacement considerationsandâ step-by-step installation for compatible Whirlpool models and part⢠numbers
- Q&A
- The Conclusion
Function and electrical role of the radiant module cartridge â˘in electric Whirlpool ranges
The A122BA Whirlpool Radiant Moduleâ Cartridge Black âfunctionsâ as the powerâswitching â˘interface between âthe range’s user control (infinite switch or electronic control board) and⢠the⢠radiant surface⤠element. Electrically, the cartridge receives control â˘signals and closes aâ highâcurrent circuit to âtheâ element, switching the element’s 240 VAC supply on âand off âor âmodulating it through phase control depending âŁon the control scheme.⤠The module often containsâ the switching device (mechanical ârelay or solidâstate triac), a thermal cutout or fuseand â¤connectorized wiring pigtails; âwhen any of these internal â¤components fail â˘the result â˘is commonly a noâheat condition, intermittent heatingorâ an element thatâ remains energized.
- Common symptoms: burner not heating, âŁelement stuck on, intermittentâ operation, visible burning or melting⤠at the connector.
- Electrical behavior: switches 240 VAC to the element;â receives lowâpower control⢠input⢠from theâ range controller.
- Compatibility considerations: connector pinout âŁandâ mounting must âŁmatch the range model and control type.
| Item | Description |
|---|---|
| Operating voltage | Switches the element’s âŁ240 VAC â˘supply (control input is lower-powerâ from the range âŁcontrol) |
| Function | High-current switching, sometimes with overtemperature or fuse protection; â˘connectorized for specificâ model â¤harnesses |
For â¤practical troubleshooting âŁand replacement, verify⢠that the correct part number andâ harness orientation â˘match the range model⣠beforeâ installation; visually⢠inspect for burntâ terminals and measure for 240 âVAC at the module output while âa burner âŁis called for⤠to confirmâ switching action.â Technicians⤠commonly check continuity through the module â¤when de-energized,verify âthe control input signal when the range is⣠set⢠to heat,and confirm element continuity; if âŁthe module fails âŁto pass 240 VAC to the element⣠despite a valid controlâ signal,replacement of the cartridge is â˘the usual remedy rather than⤠attemptingâ internal repairs.Matchingâ the A122BA cartridgeâ to the âappliance’s control type (mechanical infiniteâ switch vs. electronic control) âŁand ensuring proper ground â¤and⢠neutral connections willâ prevent⢠miswiring and recurring failures.
How the A122BA⤠Whirlpool âŁRadiant Module Cartridge Black interfaces with â¤control boards, sensors,⤠and â¤heating elements
The⢠A122BA Whirlpool Radiant âŁModule Cartridge Black servesâ as the electrical and sensor gateway between the oven⢠or â¤cooktop⢠control board and the radiant elements.â It accepts command signals⤠from the main control⢠(logic-level pulses or switched mains commands), provides⢠switchedâ mains power to the âheating elements via an internalâ relay or semiconductor switchand â¤monitors âŁtemperature andâ safety⣠inputs such as â¤a surface thermistor and high-limit cutouts.⤠technicians typically â˘verify correct behavior⣠by confirming the⤠control board sends the expected command to the module â˘and then measuring for 240 VAC (or the appliance’sâ rated mains) at the module’s element output⤠when the controller requests heat;⢠a working âmodule â˘will switch mains to â˘the element only while the controlâ signal is present and will report valid â¤sensor values back âŁto the âcontrol board â˘for closed-loop⣠regulation or fault âdetection.
- Power input: mains supply to the âmodule and internal switching device
- Control input:⢠command from the main controlâ board (logic or switched AC)
- Sensor input: â˘surface or element temperature thermistor/RTD feedback
- Output: switched mains toâ heating element(s)
- Safety interlocks: high-limit switches â˘and fault reporting
Compatibility hinges on matching âconnector pinout, sensor type⤠(for example, an NTC thermistor vs. âRTD), switching method (mechanical relay vs. triac)and rated voltage/current âŁfor the â¤heating element. In practice, a replacement must⤠present the same pin assignments and electrical ratings asâ the âŁoriginal module; orâ else⣠the control board â˘may receive incorrect sensor âreadings or the module may fail under â¤load. âCommonâ diagnostic steps â¤include âmeasuring thermistor resistance at ambient to confirm expected values for the sensor âtype, checking â¤for continuityâ and correct â¤resistance across the elementandâ verifying â¤that the control board supplies the proper command voltage âŁto the âmodule – if the control signal is⤠present but⣠the module âdoes not switch mains, the module is the⣠likely fault. Keep safety⤠in mind: always remove mains power before disconnecting connectors or measuring âelement continuity.
| Item | Description |
|---|---|
| controlâ signal | Logic-level or⣠switched AC input⢠from the main control âthat tells the module to energize an âŁelement |
| Sensor âinput | Temperature sensor return (commonly an NTC thermistor) used for⢠closed-loop control and fault âdetection |
| Heating output | Switchedâ mains âconnection that feeds the radiant element when commanded |
Common failure symptoms and measurable diagnostic indicators for the â˘radiant module cartridge
The A122BA Whirlpool⣠Radiant Module cartridge Black is a⣠modular power-switching assembly that â¤routes mains toâ a radiant cooktop element⤠under control of the range’s user interface âand temperature controls. In âŁpractical âoperation âthe â¤cartridge provides the switching contacts and, â¤on⤠some designs, a small temperature⢠sensing element or fuse; it must match the appliance harness âŁand⤠voltage ârating to avoid misoperation. When the control signals energize the â¤module the⤠internal contacts âshould present aâ very low resistanceâ path to the âŁelement; common âfunctional âfailures are open contacts,high-contact resistance,or short-to-chassis that result in loss of heat,intermittent heating,or nuisance âtrips of âŁupstream protection devices.
Technicians â¤diagnose â˘the module by combining âvisual inspections âwith measurable electrical checks: âcontinuity/resistanceâ of âthe switched path (expect single to âlow âtens of ohms for the â˘element circuit and⤠1 MΊ),⤠andâ presenceâ of the correct mains voltage at âthe module input and output âwhen aâ heat call is made. âUse a multimeter to confirm âline voltage at the module input during a call for heat (voltage⢠will âmatch the appliance rating – commonly â208-240 VAC âŁon many electric ranges), thenâ measure the⣠output terminal while loaded to âdetect excessive voltage drop across the module.⣠If the module includes a⢠thermistor or NTC âsensor, compare âits cold resistance to the⢠service specification (many thermistors are around 10 kΊ â˘at 25 °C, but consult the appliance’s âservice sheet). Recordable⢠indicators âthat a cartridge has failed⤠includeâ an âopen circuit at the switched⢠terminals, a contact â˘resistance â¤that rises â˘under load, measurable leakage to chassisor visible⢠carbon tracking and burned terminals.
- No heat or reduced heat output
- Intermittentâ operation âorâ cycling while⣠control indicates a steady call
- Visible arcing,â carbonizationor melted connector housing
- upstream breaker or fuse â¤trips â¤whenâ the element⤠is selected
- Measured open âŁcircuit⣠or high resistance at⣠switched terminals
| Item | Description |
|---|---|
| Openâ circuit at⢠switched terminals | Multimeter shows infinite/OL continuity â⢠internal contact failure or broken connection. |
| High âŁcontact resistance | Closed-circuit resistance considerably above milliohms/low⢠ohms or â¤large voltage drop âunder load â âcontact wear or pitting. |
| Leakage to chassis | Insulation resistance <1 MΊ or measurableâ continuity to ground ââ shorting risk;â replace⢠module. |
Compatibility,replacement â˘considerations,and step-by-step âinstallationâ for compatibleâ Whirlpool âmodels and part numbers
The âA122BAâ Whirlpool Radiant âŁModule Cartridge â˘Blackâ is a âmodular control cartridge â¤that replaces theâ internal⤠switch/thermostat assembly forâ a single radiant burner on âcompatible Whirlpool cooktops. Electrically, the cartridge contains the switchingâ contacts⤠andâ any temperature-sensing⣠or feedback components thatâ interface âwith â¤theâ cooktop control â˘board;â correct âŁreplacement requires⢠matching the cartridge’s âterminal layout, nominal voltage (typically 240 V for â¤single-phase radiant⢠elements)and physical snap-in âfootprint.â Technicians confirm âcompatibility⤠by âcross-referencing the appliance⢠model and service partâ number âon⢠the cooktop’s rating⢠plate or service manual: the âŁcorrect cartridge will match the connector pin âŁcount and housing notch locations â¤so that the element lead and thermostat/sensor align without âmodifying wiring harnesses.
Replacement requiresâ careful isolationâ of mains power and⢠verification of both mechanical fit and electrical continuity before reassembly. Typical service⣠procedure includes removing the glass or trim to âaccess the cartridge, documenting theâ original âwiring orientation,⣠disconnecting the harness, â˘and âreplacing⢠the⣠cartridgeâ with the new â˘A122BA unitâ whileâ preserving any insulating⢠gaskets and retaining⣠clips. After reassembly,â perform a basic âfunctional test (measure continuity across the switch with the element âoff, then apply power âandâ confirm burner heat regulation) and check for error codes or abnormal âŁresistance values to confirm a prosperous replacement.
- Shutdown: Disconnect power at the breaker âand verify with a voltmeter.
- Remove cooktop âsurface orâ trim according âto model⢠service instructions âto âexpose âŁthe cartridge.
- Document wire positions,⢠depress connector latchand remove the cartridge retaining clip⣠or âscrews.
- install the new âcartridge in the sameâ orientation, reconnect the âharnessand secure âretention hardware/gaskets.
- Restoreâ power and perform continuity and operationalâ checks;⣠verify âelement âcycles and temperature control.
| Item | Description |
|---|---|
| Typical mounting | Snap-in cartridge or screw-retained in the ceramic cooktop aperture, with keyed housing toâ prevent incorrect orientation. |
| Connector | multi-pin insulated blade connector; âverify pin count and spacing against⢠harness before installing. |
| Common symptom | Burner fails to heat, stays on continuouslyor shows intermittent heatingâ caused byâ worn contacts or failedâ sensor circuitry. |
Q&A
Whatâ is the⤠A122BA Whirlpool Radiant Module âCartridge Black âŁand what does it do?
The A122BA radiant module cartridge (black) is the userâcontrol switching device-commonly called an infinite âswitch-for a Whirlpool radiant/glass cooktop. It sits behind a control knob and âregulates the â¤amount of electrical⣠power âsent to a specific surface heating⣠element by⤠switching or modulating â˘the circuit as âyou⢠turn the knob. In short, it âcontrols the burner⣠temperature settingsâ on âŁthe cooktop.
How âcan I tell â˘if the âŁA122BA module is bad?
Common symptoms âof a failing module includeâ a burner â¤that won’tâ heat at âall, a burner that is âŁstuck on one⣠heatâ level, âerratic heating (cycles incorrectly), âor⣠a burner that stays on⣠even with the âknob off.Visualâ signs can include scorching⢠or melting âaround⣠the âŁmodule and terminals. Before â˘replacing the module, verify the element and wiring are âgood and⣠follow electrical tests â¤with a â¤multimeter⢠while â¤the â¤unit âis⤠deâenergized.
How do I safely test the radiant module⣠with a multimeter?
Safetyâ first: disconnectâ powerâ to the appliance â˘at the breaker. Remove the control knobâ and access âŁpanel âŁto reach⤠the⣠module.â Note or photograph âall wire â˘locations. With the module isolated from the âcircuit,use â¤a multimeter to check for continuity between the appropriate terminals per the wiring diagram (continuity⢠should change as âthe control is ârotated). Alsoâ test for shorts to chassis/ground.If you are not comfortable with electrical âtesting,⢠hire a qualified âtechnician.
Can I replace the A122BA module myself and how?
Yes, a competent DIYer can replace âŁit if they âfollow⢠safeâ procedures. âSteps: cut â˘power at the breaker, remove the knob and back control panel, document or photograph⢠wire terminal âpositions,⢠disconnect wires, âremove mounting screws and replace⣠with the new A122BA âmodule, âŁreconnectâ wires to theâ correct terminals, reassembleand ârestore power. â¤Always ensure power is â˘offâ and âuse insulated⤠tools. If you’re âŁunsure, have a trained appliance technician âdo the replacement.
Howâ do I find the correct replacement part for âmy cooktop?
Confirm compatibility by matching the âappliance model number (from the appliance data⣠tag/label) and the part number (A122BA) when⢠ordering. Crossâreference diagrams on âŁthe manufacturer⢠or⢠authorized parts sites. Different Whirlpool/Maytag/Amana models can use different cartridge variants even if they â¤look similar-verify the model numberâ to avoid purchasing an âincompatible part.
Is the A122BA module interchangeable with other Whirlpool radiant cartridges?
not necessarily. Some modules are interchangeable across âŁa⣠range ofâ models, butâ many have âspecific terminal âŁorientations, mounting hole locations,â or electrical ratings. Always⣠confirm interchangeability with aâ partsâ diagram or â˘vendor⢠crossâreference using âyour âŁappliance modelâ number.Usingâ an incorrect âmodule can cause improper operation â¤or be unsafe.
What⢠safety â˘precautions should I take when replacing or testing this module?
Always disconnect power at the householdâ breaker before servicing.Use insulated tools, avoid touching live terminals, â˘and keep the â˘work⢠area dry. Take photos of wire locations â¤beforeâ disconnecting. If you find burnt terminals or damaged insulation, replace âŁthose components âas well. If you⤠haveâ any doubt about performing electrical repairs, hire a licensed appliance technician.
How long do these âmodules âtypically last andâ are there âŁmaintenance tips to extend life?
Lifetime varies widely â(often several yearsâ to over a decade) depending on usage,heat exposure,and cooking conditions. To extend life: âavoid leaving pots off-center orâ boiling over frequently, clean â¤control areas to âprevent grease buildup, use proper cookwareand avoid excessiveâ force on knobs.⤠If⣠you notice intermittent â¤performance,â address it promptly to avoid âprogressive âdamage to theâ switch and wiring.
the Conclusion
The A122BA Whirlpool Radiant⣠Module Cartridge Blackâ serves as a âkey control component within compatible Whirlpool cooktops, regulating⢠theâ power delivered to radiant â¤heating⢠elements and contributing toâ consistent temperature response and â¤user control. Its â¤proper function supports safe, efficient operation of the â˘cooking â˘surface, helps maintain âeven heating performance,â and âcontributes to the overall reliabilityâ of the appliance.
Accurate diagnosis and timely replacement of â¤aâ failing radiant module are important to prevent erratic heating, electrical stress on other componentsand potential service interruptions. Identifying âsymptoms earlyâ and⣠confirming âthe fault âthroughâ appropriate⢠testing-preferably performed by âa qualified serviceâ technician-ensures the correct part is used⣠and⤠thatâ replacement follows manufacturer guidelines and safety procedures.
Whenâ replacement is required, using⢠the â¤correct OEM or approved equivalent module and having the work completed professionally helpsâ restore performance, âŁprotect other componentsand âextend the âusable life of the cooktop.Routine attention to symptoms, combined with informed, safety-conscious âservice decisions, preserves appliance performance⤠and minimizes longer-term repairâ needs.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
