WD24X10062 GE Dishwasher Drain Tube⤠Assembly is a molded drain hose assembly used in GE built-in⤠dishwashers to convey wastewater⣠from the appliance to the household âdrain or garbage disposal. It is a fluid-transfer component-typically a flexible, heat- âand chemical-resistant hose with factory-molded fittings or barb ends-designed to provide a sealed pathway for discharged water and to âŁinterface with the dishwasher’s drain outlet and external drain plumbing.
Within⤠the âappliance, the drain tube assembly connects directly to theâ dishwasher drain pump or sump outlet âand routes⤠effluent to an air⣠gap, âsinkâ tailpieceor disposal; it thus interacts with the drain pump, door⢠and cabinet âŁsealsand the external drain system. Proper routing and secure connections of âthe âŁtube areâ critical toâ prevent leaks, siphoningor⤠backflowand the⤠part âmust withstand elevated temperatures, detergents and intermittent pressure pulses generated by the pump. Its location is âtypically at the rear orâ side âof the cabinet, âŁexiting thru an access panel or routing clip to⣠the building drain connection.
In this article â˘you⣠will find a technical overview of the WD24X10062 drain tube assembly including its function, how âŁto verify compatibility with specific GE dishwasher models, common failure symptoms (for âexample leaks, kinks, clogs, odorsor degraded fittings), practical troubleshooting steps to isolate drain-related faultsand replacement considerations such as correct routing, sealing/clamping methodsand safety precautions to observe during service. â¤Theâ goal is to provide the information a technician,engineer,or appliance owner⤠needs to diagnose drain issues and decide whether repair or replacement of the tube⤠assembly is required.
Table of Contents
- Function and Role of the Dishwasher Drain tube in Wastewater Evacuation â˘and âBackflow Control
- How the WD24X10062⣠GE Dishwasher Drain Tube⣠Assembly Works âInside the Appliance: Flowâ Path, âConnectionsand Seal Interfaces
- Common Failure Symptoms:â Leak Patterns, Blockage Indicators, Odor Sourcesand Pump-Load Effects
- Compatibility, Replacementâ Considerations and Diagnostic Troubleshooting for the WD24X10062 â¤GE Dishwasher Drain Tube Assembly
- Q&A
- Concludingâ Remarks
Function and role ofâ the Dishwasher Drain Tube in Wastewater âEvacuation and Backflow control
The WD24X10062 GE Dishwasher Drain⣠Tube âAssembly functions as the⤠principal conduit that carries gray wastewater from the dishwasher â¤pump and sump to the household drain orâ garbage disposal while â˘helping to manage âsiphoning and backflow. The tube must withstand repeated wet/dry cycles,⤠bending during installation,â and the intermittent pressure pulses delivered by⤠the dishwasher drain pump. Correct routing-typically creating a high loop under the countertop or tying â˘into an upstream â air gap-and âŁsecure fittings are the primary means to prevent waste water from returning to the dishwasher; some installations also useâ dedicated check valves or air-gap devices at the sink side for regulatory compliance. Technicians should viewâ the drain tube as a fluid-handling line that requiresâ the rightâ material adaptability âŁand secure connections rather than a â¤pressurized âŁplumbing segmentand should verify interface compatibility with the appliance outlet, âthe⤠sink tailpieceor the disposer inlet before replacement.
Common practical considerations when assessing âor â¤replacing a drain tube include material â˘condition (softness versus âbrittleness), whether the tube kinks â¤when routedand âthe adequacy of clamps and slip-fit connections;⤠clogs or collapsed sections are frequent causes of slow draining âor leaks.Typicalâ features and installationâ checks include the tube’s âflexibility,resistance to abrasion at sharp bends,and âcompatibility âwith existing fittings; technicians often follow a checklist:â inspect âŁfor cracks,clear internal obstructions,confirm a high-loop or air-gap,and secure clamps.â Examples of failure modes are hairlineâ cracks⤠at tight bends leading to â˘intermittent leaksand sediment buildup near the pump outlet causingâ restricted flow. For quick reference, common technical attributesâ are summarized below.
- Material and flexibility – must resist repeated flexing and exposure to detergents and⢠hot water.
- Routing – maintain a high loop or connect to âan air gap â˘to prevent backflow.
- Connection type – match the dishwasher outlet and household drainâ fitting; use properâ clamps.
- Maintenance signs â- stiffness, cracking, kinksor persistentâ slow draining indicate replacement.
| Item | Description |
|---|---|
| Material | flexible PVC or corrugated plastic suitable for wastewater exposure |
| Function | Conveys wastewater; assists in backflow prevention whenâ routed correctly |
| Installation checks | High loop or air-gap compliance, secure clamp connections, noâ kinks or obstructions |
How the WD24X10062 GE â˘Dishwasher⢠Drain Tube Assembly Works Inside âŁthe Appliance:⢠Flow Path, Connections,⣠and Seal Interfaces
The WD24X10062 GE â¤Dishwasher Drain Tube Assembly routes⣠wastewater from the⣠dishwasher’s sump/pump area to the household drain system and provides âthe necessary seal interfaces to prevent leaks and backflow. During the drain cycle the pump forces wash âand rinseâ water through âthe tube; the assembly connects directly to the pump outlet via a hose barb or molded â˘quickâconnect and terminates at an âair gap, disposer inletor sink⢠drain tailpiece. The tube’s internal diameter, wall reinforcementand fitting geometry determine âflow rate and⤠compatibility with specific GE â˘chassis and pump âŁdesigns,⢠so replacements must match those specifications to maintain proper drainage and⢠prevent siphoning or overpressurization of the pump.
Inside the appliance the flow path â˘follows a short, minimally restrictive route from the pump, through⤠the WD24X10062 tube, then upward âto the air gap or across a high loop âŁbeforeâ reaching the building â¤drain; â˘this routing prevents residual⣠water â¤from flowing back into the⤠tub. Common seal interfaces include pushâon hose barbsâ secured with clamps, molded flanges that seat against gasketsor factoryâ crimps; failures typically occur from clamp loss, abrasionor heatâstiffening that creates cracks â¤or pinholes. For â˘troubleshooting and repair, inspect for kinks, correct elevation of the high loopand â˘secure âclamp seating; technicians often verify compatibility⢠by checking inside diameter, lengthand the presence of OE fittings before installing a replacement.
- Typical failure indicators: external leaks at connection points, âsluggish drainingor⣠dishwasher smelling of standing water.
| Item | description |
|---|---|
| Material | Flexible reinforced rubber/plastic resistant to detergents and⤠heat |
| Connection types | Hose barb âwith clamp, molded quickâconnect,â or end for air gap/disposer |
| Compatibility note | Must match pump outlet diameter and⢠fitting style for proper seal |
Common Failure Symptoms: Leak Patterns, Blockage Indicators,⣠Odor Sourcesand pump-Load Effects
The âŁWD24X10062 GE Dishwasher Drain Tube Assembly is the molded conduit that conveys wastewater from the dishwasher pump to the household drain or air gap. Typical materialâ choicesâ are â˘nitrile rubber or reinforced PVC;⣠failures usually appear at mechanical stressâ points – â¤crimps, clamp connectionsor where the tube bends sharply. Leaks often present âas⤠continuous seepage at a joint â¤or⢠intermittent drips when the pump runs; pattern location helps isolate the fault (door-sill stains indicate front-end leakage, under-sink puddles point to the tail connection). Compatibility with âspecific GE chassis and pump outlets matters for fit and clamp orientation, so sealing failures are frequently â˘traced to mismatched or degraded flanges rather than the pump itself.
Blockages and trapped food cause distinct hydraulic and electrical symptoms: slow drain times, gurgling through the air gapand stale odors fromâ standing water in the⣠low sections of the hose. These conditions increase the mechanical â˘load on the pump, producing higher current draw, audible motor strainor protective thermal trips; monitoring the pump â˘current or listening for a⣠persistent hum provides diagnostic clues.⣠Practical inspection should target accessible low points,hose clamps,and the pump inlet screen; small obstructions near the pump create disproportionate backpressure andâ odor buildup compared with âŁlarger,downstream obstructions.
- Continuous puddling under sink â- likely âclamp failure,split hose,or âŁloose connection
- Intermittent drips duringâ drain cycle – wear at bends âŁor a hairline⤠crack
- Slow draining or standing water – internal blockage,kink,or collapsed section
- Sour or sewage odor â¤- trapped organic residueâ in low sections â˘or air gap
- Motor hum or circuit trips -⢠elevated pump load from restriction or trapped debris
| Item | Description |
|---|---|
| Leak location | Identifies whether failure is at pump outlet,hose body,or tail connection |
| Flow symptom | Gurgling/slow drain indicates restriction; â˘steady flow with leak suggests âbreach |
| Odor source | Low-hanging hose sections and âtrapâ pockets retainâ food residue and⣠create smells |
| Pump-load indicator | Increased⣠current or humming signalsâ hydraulic restriction or impeller ârubbing |
Compatibility,Replacementâ Considerations and Diagnostic Troubleshooting for the WD24X10062 GE Dishwasher Drain Tube Assembly
The WD24X10062 GE âDishwasher Drain Tube Assembly is the flexible conduit that carries wastewater from the âdishwasher⣠sump âand drain âpump to the household drain or garbage disposal. It typically uses heat-⤠and chemical-resistant elastomer or PVC âconstruction with â¤barbed or quick-fit terminations and requires correct inner diameter, lengthand elbow orientation to mate âwith⢠the âŁpump outlet, air gapor âŁdisposal inlet. Compatibility depends onâ these mechanical interfaces and on whether the dishwasher model expects an integrated check valve or a raised anti-siphon loop; technicians shouldâ verify the⢠OEM part number, connection styleand routing âconstraints before installing a replacement to avoid backflow or fitmentâ issues.
- Visible split, crackor brittle sections causing âleaks at the hose âbody or fittings.
- Pooled water in âthe tub orâ slow drainage indicating obstruction or collapsed tubing.
- Gurgling noises or intermittent draining due to siphoning or improper routing below⣠the trap.
- Loose or âcorroded clamps at the âpumpâ outlet or disposal connection producing drips⢠under load.
For⣠diagnostics start with a visual inspectionâ and a short cycle⢠to reproduce symptoms; tighten or replace clamps, clear debris from⢠the âhose â¤and pump inletand test flow by disconnecting the hose (power and water isolated) and blowingâ through it to detect partial blockages. âŁReplace the assembly if the material has hardened, shows hairline cracks,â or âthe hose dose not âmaintain its shape under vacuum; âuse aâ replacement that matches the âŁoriginal’s inner diameter, termination typeand lengthand reinstall⢠with stainless clamps and an âŁanti-siphon loop aboveâ the trap. When connecting âto aâ garbage disposal, confirm the knockout plug has been âremoved â˘and that â˘the hose is routed to prevent kinking; failure to match âconnection geometry or routing often causes persistent leaks or drainage failures even with a new hose installed.
| Item | Description |
|---|---|
| material | Heat- and â˘detergent-resistant PVCâ or elastomer; mustâ resist repeated flexing âŁand hot wastewater. |
| Typical connections | Barbedâ pump â˘outlet, clamp-on to disposalor quick-connect fittings; verify inner diameter and elbow â˘orientation. |
| Common failure modes | Cracking from age/heat, clamp corrosion, internal⢠blockage, improperâ routing causing â˘siphoning. |
| Installation notes | Match OEM connector type, maintain anti-siphon loop above trap, use stainless clamps, remove disposal knockoutâ if applicable. |
Q&A
What is âthe WD24X10062 drain tube assembly and which dishwashers does it fit?
The WD24X10062 is an OEM GE dishwasher drain tube âassembly used to carry waste water from the dishwasher drain pump to the sink tailpiece, garbage disposal or air gap.â It is used on many GE/Hotpoint/GE Profile dishwashers – but not everyâ model.⤠Always verify compatibility with your exact appliance model number (usually on theâ door jamb) orâ the parts diagram for thatâ model before ordering.
What are â˘common signs that âŁthe drain tube (WD24X10062) needs replacement?
Common signs include visible cracks or splits⤠in the hose,persistent leaks under the dishwasher or under⤠the sink during drain cycles,recurring clogged drains that cannot be clearedâ byâ cleaning,or when theâ hose isâ crushed/kinked⣠so it cannot drain. â˘If you see wastewater backing â¤up into the dishwasher or foul odors that cleaning doesn’t remove, inspect the drain tube for â¤damage⤠or blockage.
How do I âreplace the WD24X10062 âdrain tube – what are the basic stepsâ and safety precautions?
Turnâ off power⣠to the dishwasher at the breaker and âŁdisconnect any power âplug. Pull the dishwasher out slightly, â¤remove the access panel/toe kick if needed,â and place a towel under the hose to âcatch water. Loosen the clamp at the pump outlet and the clamp at the sink/disposal/air gap and⢠remove the old hose. Route the new WD24X10062 following⣠the same path,â attach it to the pump and â˘the sink/disposal/air gap with hose clamps, form â¤a âŁhigh loop or connect to anâ air gap, secure any retaining âclips, âŁthen push the dishwasher back and restore power. Verify there are no leaks by running a short drain cycle. Use basic tools: pliers or nut driver, âŁscrewdrivers,⣠towels. Do⤠not work on âŁthe appliance while it⢠is indeed energized.
Do⤠I need any âspecial clampsâ or parts when installing âWD24X10062?
Some sellers⤠include hose clamps or retaining clips, but many listings do not – check the product description. Use⢠corrosion-resistant worm-gear hose clamps or OEM-style spring clamps sized for the hose diameter to ensure a tight seal atâ the pump and âtailpiece/disposal. If your installation âuses an air gap or disposer knockout,make sure⤠those connections are secure and sealed. Replace worn clamps or ferrules as needed.
How should âŁthe drain tube be routed – is a⤠“high loop” required?
Yes – the drain tube must be routedâ with a high loop (secured as high⢠as possible under the countertop) or connected toâ an air âŁgap where⤠required by local plumbing code. The high loop prevents backflow from the sink or disposalâ into the dishwasher. Also avoid⣠tight âbends, kinks or contact âŁwith sharp edges that could pinch or wear the hoseand secure the tube with clips or zipâ ties where provided.
What can cause clogs inâ the âŁWD24X10062 and how do âI clearâ them?
Clogs are commonly caused by âfood particles, grease buildupor objectsâ that bypassâ the dishwasher filter. To clear a clog, disconnect the hose fromâ the pump or tailpiece and inspect/flushâ it withâ water; you âcan use a straightened wire or flexible brushâ to remove debris. Also inspect and clean the dishwasher filter, drain pumpâ inlet and garbage⢠disposal (if used). If the hose is badly fouled or collapsed, replace it rather than attempting prolonged repairs.
Will a faulty WD24X10062 make my dishwasher not drain at all?
Yes – if the drain tube is wholly blocked,⤠kinked, disconnectedor has a collapsed section, the⣠dishwasher will not drain properly and you may get error codes or standing water. However, no-drainâ problems can also âŁresult from a failedâ drain pump, clogged pump filter, malfunctioning âcheck âvalveor disposal blockage. Diagnose âŁby inspecting the hose, âŁthen checking the pump and filters.
Is WD24X10062 an OEM part and are aftermarket hoses acceptable?
WD24X10062 is⣠an OEM GE part number.OEM parts match âthe original specifications and fit,which reduces installation and reliability issues. Quality aftermarket hoses can be â˘acceptable if theyâ match length, diameter, material, âand have appropriate fittings, but verify fit and compatibility âŁbefore installing. Also ensure anyâ replacement âmeets local plumbing requirements (e.g., materials and use of air gap/high loop).
Concluding Remarks
The WD24X10062 âGE Dishwasher Drain âTube Assembly is⢠a key component that⣠directs wastewater from the dishwasher to the household drain system. Proper function of this tube helps prevent standing water, reduces the â¤risk of leaks and â˘water damageand supports overall appliance performance and sanitation. As it⤠interfaces with the motor, pump and external plumbing, its⢠integrity âŁdirectly affects both operational reliability âand the lifespan of the dishwasher.
Timely âŁand accurate diagnosis of⣠drain-related issues is⢠crucial to avoid secondary failures. Signs such as slow draining, visible leaks, unpleasant odorsor related error codes should prompt inspection âof the drain tubeâ for âclogs, âcracks or improper routing. whenâ repair âis warranted, replacement with the correct WD24X10062 assemblyâ – installed following manufacturer âŁinstructions or completed by âa qualified technician – ensures proper fit, restores âreliable drainageand minimizes the likelihood of recurring â˘problems.
Routine checksâ and adherence to recommended maintenance practices can extend the service life of the âdrain tube and the dishwasherâ as a whole. For safetyâ andâ performance, alwaysâ isolate powerâ and water before servicing and use appropriate replacement parts and installation⣠methods to maintain appliance integrity â¤and compliance with⤠warranty and safety guidelines.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
