241816602 Frigidaire Refrigerator Motor-AUGER⣠is an electric âauger motor⤠assembly used in Frigidaireâ ice dispensing⢠systems to rotate the auger that conveys ice from âthe⣠ice bin to the dispenser chute.The⣠component typically consists of a low-power electric⤠motor coupled toâ a gear âreduction or worm drive and an auger shaft; it is mounted within âthe freezer door or ice⢠bin housing and connects mechanically to the plastic auger flighting. This part is a functional electromechanical actuator rather than â˘a control deviceand understanding its construction-mounting points, connector typeandâ mechanical âcoupling-is useful when diagnosing dispenser-related faults.
Inside⢠the appliance the auger motor serves as the âfinal stage of the ice delivery subsystem,⢠translating an electrical command from â¤the control board âor dispenser switchâ into rotational torque that moves ice pieces through the chute. It interacts directly with the ice⤠bin and auger flightingand indirectly with theâ dispenser microswitches, door switches, control module⣠outputsand âany jam sensorsâ orâ overload protection devices. From a technical perspective technicians should considerâ torque requirements,gear reduction ratio,stallâ current behavior âand the effect of ice bridging or âforeign objects on motor load; electrically,the motor’sâ supply circuit,connector â¤pinout and any inline fuses or â¤thermal cutouts are key points of âinspection.
In this article readers will find⢠a systematic examination âofâ the⤠241816602 Frigidaire âRefrigerator Motor-AUGER including itsâ intended function, âŁtypical applications and model compatibility, common failure symptoms (such âas no rotation, humming under load,⤠intermittent operation or abnormal noise), step-by-step troubleshooting âprocedures (mechanical inspection, continuity and voltage checks, load testing)and practicalâ replacement considerations (correct part fitment, â˘connector and mounting alignmentandâ basic safety precautions âlike disconnecting mains power and⢠removing ice before service). âThe â¤goalâ is to⣠provide technicians,engineers and informed appliance owners âwith the technical context and actionable checks needed toâ diagnose and replace the auger motor reliably and safely.
Table of âŁContents
- Function and Role ofâ the Auger Motor âwithin⢠theâ Ice Dispenser⢠Mechanism
- How âthe 241816602 Frigidaire Refrigerator Motor-AUGER interfaces withâ Drive Train, âControl Electronics,⤠and Ice Chute Components
- Common Failure Symptoms and Measurable Diagnostic Indicators of auger Motor Faults
- Compatibility, Replacement⤠Considerationsand âŁstep-by-Step Installation Procedures for the Auger Motor
- Q&A
- Closing⤠Remarks
Function and⤠Role of the Auger âMotor⣠within⤠theâ Ice Dispenser Mechanism
The 241816602 Frigidaire Refrigerator Motor-AUGER is a compact gearmotor that provides the rotational torque to⣠advance the â¤auger screw inside the ice bin and feed ice through â¤the dispenser chute. The motor’s gearbox reduces â˘RPM â˘while increasing torque⣠so the auger can move âcompacted ice âwithout stalling; this reduction also controls dispense speed to meter⢠portion size. Mechanically the motor couples to the auger âvia a splined shaft âor plastic⤠coupler and is mounted toâ the dispenser housing to maintain alignment with the âbin assembly.â Electricalâ control is typically simple on/off actuation from the dispenser switch or âcontrol board,⣠and manyâ designs incorporate a low-voltage coil or thermal protection toâ limit current⤠during stall âconditions.
- Primary function: â˘produce steady rotational torque to advance â˘the auger screw.
- Behavior: slow,â high-torque output with gearboxâ reduction to prevent jamming.
- Compatibility factors: âmounting pattern, shaft/coupler geometryand rated⢠supply voltage.
- Common symptoms â˘of âfailure: no dispense rotation, âŁintermittent operation, grinding or clicking sounds⤠indicating stripped⢠gears or a seized shaft.
For replacement â¤or diagnostics, verify the motor’s mechanicalâ interface and electrical ratings match the original assembly; mismatched gear â˘ratios or shaft types â˘can cause improper portioning or mechanical interference. â˘A technician should confirmâ the harness connector pinout and applied voltage from the control board before âbench-powering a motor; if bench testing is necessary, use the specified supply and monitorâ current âdraw to âdetect bearing drag orâ gear⣠binding. In practise, âmany service cases resolve âby replacing the motor assembly when persistent stalling, âŁexcessive noiseor visible gear damage âis present, while loose mounting or connector⤠corrosionâ can often mimic motor failure.
| Item | description |
|---|---|
| Part | 241816602 Frigidaire Refrigerator Motor-AUGER |
| Function | Provides⢠gear-reduced ârotational â˘torque to drive the âauger screw for ice dispensing |
| Typical issues | Stalling, ânoise from worn âgears, â¤intermittent operation due to âconnector or control faults |
How the 241816602 Frigidaire â¤Refrigerator Motor-AUGER Interfaces⣠with Drive train, Control Electronicsand Ice Chute Components
The 241816602 Frigidaire Refrigerator Motor-AUGER is the compact gearmotor thatâ directly transmits torque âinto the â¤auger shaft⤠within the ice bin assembly.Mechanically, it mates to⤠the auger via a splined or keyed coupling and⢠is secured to the refrigerator⢠chassis with specific mounting tabs; proper engagement of the coupling⢠and correct⣠axial alignmentâ are required to avoid premature wear and â¤binding. Electrically, the motor is driven from the ice maker/dispense control electronics through a dedicatedâ harness and connector that â¤carries low-voltage drive⣠power and, on some models,⤠a feedback or thermal-protection line; the control board supplies timed drive pulses or continuous voltage depending⣠on the dispense cycleandâ in many systems the board will monitor current draw to detect stallsâ or⢠jams and terminate drive when necessary.Physically, âthe motor’s output position andâ flange location must â¤match⢠the ice chute openingâ and auger tube so the⢠auger clears the chute flapper/door and feeds ice uniformly into the dispenser path.
In âŁpractice, technicians âshould verify three interface aspects before swappingâ this motor: mechanical fit (mounting holes, shaft profileand gear âreduction), electrical compatibility (connector â¤pinout, supply voltageand any sense⣠lines)and operational behavior (rotation direction, stall⣠currentand thermal cutoff characteristics). Typical fault symptoms that trace to interface issues include noisy engagement from misaligned couplings, a motor that âspins but fails to deliver ice as of a mismatched reduction ratioor âa motor that âdrops out due to âcontrol-board current-limiting when the â˘auger âis obstructed. Useful troubleshooting steps âinclude checking for continuity â¤and correct supply voltage âat âŁthe motor connector, inspecting the auger tube for ice jams or foreign objectsand confirming that replacement parts match⤠the original shaft profile and mounting geometry.
- Drive coupling: âmust match splines/keying and maintain â˘concentricity.
- Controlâ signals: verify⢠voltage, polarityand any feedback/sense pins.
- Ice chute alignment: ensures clean âice transfer and prevents⣠jamming.
| Item | Description |
|---|---|
| Drive train | Gear reduction and⢠coupling transmit â¤torque âto the auger; misalignment increasesâ wear and load. |
| Control electronics | Low-voltage power and⣠any âŁsense lines from⣠the ice maker board âcontrol motor timing and â¤stall detection. |
| Ice chute components | Chute flapper, guide,⤠and auger tube must â˘align â¤to avoid binding and ensure consistent dispensing. |
Common Failure Symptomsâ and Measurable âDiagnostic Indicators of Auger Motorâ Faults
The 241816602 Frigidaire Refrigerator Motor-AUGER âis a low-speed, high-torque drive motor that rotates the âauger in the âŁice delivery assembly; its electrical and mechanical health directly affects ice dispensing âŁperformance andâ compatibility with the bin gearbox and⢠clutch. Typical failure âmodes include electrical open circuits, shorted⣠windings, worn commutation surfaces or brushesand mechanical binding inâ the⢠gear train orâ auger shaft. â¤Technicians shouldâ considerâ both supply-side measurements and mechanical inspection âbecause the motor is âintegrated⣠with a gearbox and mount that can mask a purely electrical âfault-for example, a motor that draws normal voltage but stalls under load usually indicates gear or auger jam rather âthan a control board failure.
Diagnosing auger⤠motor faults combines simple electricalâ checks with load and acoustic observations: verify presence âand stability of the expectedâ supply voltageâ at the motor connector, test winding⣠continuity and insulation to chassisand measure running current under a controlled load to detect â¤excessive draw. Practical examples include bench-testing âthe motor with a regulated âsupply to observe starting⣠torque,using a âclamp meterâ to confirm current increases when the auger is restrained â¤(indicating binding),and listening forâ grinding⢠or intermittent clicks that point to stripped⤠gears or⢠intermittent âbrush contact. The following list and reference âtable summarize the most actionable symptoms and measurable diagnostic indicators for field troubleshooting.
- No rotation but correct terminal⣠voltage – likely open⢠winding, faulty commutator/brushesor internal mechanical seizure.
- Intermittent run or stutter – intermittentâ electrical contact, âŁcorroded connectororâ worn brushes; inspect connector pins and brush seating.
- Excessive current draw under load – mechanical âbinding, gear damageor âŁbearing failure; compareâ running current to a known-good unitâ if available.
- Audible grinding or clicking – broken gear teeth or⢠debris in the âauger path; remove and inspect gearbox and auger shaft.
- Normal free-spin but no ice movement – stripped coupling or clutch disengagement between motor andâ auger.
| Item | Description |
|---|---|
| Continuity | Open⢠winding indicates electrical failure; short to chassis indicates insulationâ breakdown. Useâ a multimeter to verify continuity and absence⢠of shorts. |
| terminal Voltage | Confirm correct âcontrol â˘voltage atâ the motor connector during a dispense cycle; voltage present⢠with âno motion isolates motor or â¤mechanical load. |
| Running âCurrent | Measure current with a clamp⣠meter while motor runs; elevated current under modestâ load suggests binding or bearing/gear issues. |
| Acoustic/Vibration | Unusual noise⣠or vibration during operation points to â¤gear tooth⤠damage, loose mounts,⢠or debris interference-visual inspection required. |
Compatibility,â Replacement Considerationsand Step-by-stepâ Installationâ Procedures for the Auger motor
241816602 Frigidaire Refrigerator⤠Motor-AUGER is a compact gear-reduction âdrive that rotates theâ auger shaft in the ice bin to feed ice â¤through the dispenser. The motor assembly couples directly⤠to the auger shaft â˘via a splined or rubberâ coupler and isâ actuated by⤠the dispenser control circuit; expected behavior is short-duty cyclical operation rather than continuous runâ times. Common âfailure modes include shaft seizure from ice buildup, worn âcoupler causing slippage, bearing⤠noise,⢠and electrical faults in the motor windings â˘orâ connector. When assessing compatibility, match the physical mounting pattern, shaft profileâ and length, electrical connector âtypeand â˘control-voltage/drive characteristics to the âoriginal; mismatches in rotation âdirection, shaft geometryor âconnector pinout can prevent operation even if the motor⣠appears to fit mechanically.
The âŁreplacement and installation processâ requires basic hand tools and attention to mechanical alignment and electricalâ safety. Power must be⢠disconnected before disassembly; remove the ice bin and any trim to expose the motor, note the wiring⣠orientation and secure any clips, then unfasten⤠the âmotor mounting screws and separate the coupler from the auger. Install the replacement âŁmotor so the flange seats âflush â¤and the coupler engages âthe auger splines without⤠axial preload,torque fasteners⣠to avoidâ overtightening,reconnect the electrical connector,restore power,and⣠perform a functionalâ test by actuating the dispenser and observing smooth ârotation and proper dispensing.⣠If the new âŁmotor does not run, verify the dispenser switch and control board âoutputs and inspect for obstruction or ice bridge in the augerâ path â˘before âremoving the motor again.
- Disconnect power; remove âice binâ and access panel
- Label and disconnect âelectrical connector; remove mounting screws
- Replaceâ or inspect rubber/splined coupler when installing â¤new motor
- Seat motor flange, â¤secure fasteners, reconnect wiring
- Restore power and test dispenser operation; check for bindingâ or leaks
| Item | Description |
|---|---|
| Part | 241816602 Frigidaire Refrigerator Motor-AUGER – replacement auger drive assembly |
| Function | Rotates ice auger toâ move ice from âŁbin to dispenser⤠chute |
| Common symptoms | No ice dispense, motor⣠hums, intermittent operation, excessive noise |
| Replacement checks | verify mounting pattern, shaftâ profile/length, connector pinoutand control signal compatibility |
Q&A
What â¤is the Frigidaire partâ 241816602 âŁMotorâAuger and⤠what â˘does it do?
Part 241816602 is the â˘auger motor â¤assembly âused in Frigidaire refrigerators withâ builtâin ice dispensers. â˘It drives the auger (the spiral plastic/metal shaft) inside the ice⣠bin to move âice from the bin into the dispenser chute when you request ice.
How do I know if the auger motor is bad or âŁif the problem is something else?
Common symptoms â¤of a â˘bad auger motor includeâ the motor not⣠turning at all, a humming sound âwith no rotation, intermittent operationorâ grinding/noise during operation.Before âŁreplacing the motor, check for a jammed⢠auger (ice⣠blockages), stripped auger âgears, broken drive couplersor a failed dispenser switch/control board. â¤If the auger is free and power is present at the motor connectorâ but it still does not turn or only hums, âthe motor is highly likely âfaulty.
Can I test the motor myself with a â˘multimeter and how?
You can perform âbasicâ checks safely: unplug the refrigerator, disconnect the motor harnessand check the motor winding for continuity with a â¤multimeter-an open circuit indicatesâ a⤠failed motor.⤠Also inspect connectors andâ wiring for continuity backâ to the dispenser â¤switch or control board.Do not apply⢠household line voltage directly to the motor unless you are following the manufacturer’s service manual and safety âŁprocedures.
Is installation of part 241816602 something âŁa homeowner can doand what â˘are the basic steps?
Homeowners with basic mechanical skills can replace âthe auger motor, but always unplug the refrigerator first. Typical steps: remove the ice bin, remove access panels inside the âfreezer/ice compartment, disconnect the motor wiring harness and mounting â¤fasteners,⤠swap the old âŁmotor for the⣠new unit, âreconnect the harness, reassemble the bin and panels, then test the⢠dispenser. Keep track of screws âand take photos during disassembly if needed. If you âare⤠uncomfortable working near wiring or boards, call a qualified âŁtechnician.
Do I need any special⣠tools or lubrication when replacingâ this motor?
Common tools include screwdrivers, nut driversand possibly Torx âŁdrivers âor pliersâ depending on your⤠model.Do not lubricate the motor windings; if â¤the auger gear or gearbox requires lubrication use⢠only the manufacturerârecommended foodâsafe grease and apply sparingly to plastic gear interfaces. Avoid getting grease on the auger âblades orâ ice contact surfaces except⣠where âspecified byâ service instructions.
How do I verify that part â241816602 is compatible withâ my⢠refrigerator model?
Verify compatibility by matching the refrigerator’s⢠model number (found on the interior wall or door frame) to the parts lookup on Frigidaire’s website or an authorized parts distributor. â˘Enter your appliance model and confirm that 241816602 appears as the correctâ auger motor forâ that â¤model. Do not rely on cabinet appearance âŁalone-models that look similarâ can use different parts.
Can the âmotor⤠be repairedor shouldâ it⣠be replaced?
In most cases the auger motor assembly⣠is replaced rather than repaired. Failures are commonly internal (worn bearings, burned windings, stripped gears) and replacement ensures reliable operation and proper âsealing from ice and moisture.If the problem is mechanical (ice jam, stripped coupler), you may only need to replaceâ the⢠augerâ or coupler rather thanâ the motor.
Where can I buy a genuine â˘241816602 motor and does it âhave a warranty?
Buy genuine OEM 241816602 partsâ from Frigidaire/Electrolux authorized parts dealers, major appliance parts⤠retailers, âor⣠frigidaire’s official parts site. Aftermarket â¤sellers may also âsupply⤠compatible units-butâ confirm fit and return policy.⤠OEM parts âtypically include a limited partsâ warranty; check the seller’s warranty terms and keep your receipt â˘and the refrigerator model/serial number for⢠warranty claims.
Closing Remarks
The 241816602â Frigidaire Refrigerator Motor-AUGER serves a â˘focused but essential role in models equipped âŁwith an ice-dispensing auger âŁsystem: it provides⣠the rotational force that moves ice â¤from âthe bin through the auger mechanism to the â˘dispenser. Reliable operation of âthis motor is key to consistent ice delivery,â prevention âof jamsandâ overall user convenience; when it functionsâ properly, it helps maintain the intended performance and longevityâ of the ice-dispensing subsystem.
Accurate diagnosis is critically âimportant when symptoms such as failure to dispense ice, unusual noisesor intermittent operation arise.⢠Because âsimilar âsymptoms can be caused by â˘electrical issues, control module faults, obstructions,â or mechanical wear, systematic troubleshooting helps pinpoint whether the auger motor itself is at âŁfault. Replacing the motor⤠should be considered when testing and inspection indicate motor⤠failure or irreparable mechanical damage, rather than assuming⢠replacement is always required at the first sign of a problem.
When replacement is necessary, using the correct,⣠compatible part and following manufacturer guidance preserves functionality and safety. for complex diagnostics or installation, consultation with a qualified service technician is advisable to ensure proper electrical connections, alignmentand âmounting. Taken together, careful â¤diagnosis and correct â¤replacement support⢠dependable performance of â¤the ice-dispensing system and help avoid repeat repairs.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
