137221600 Frigidaire Washer Drain Pump is a pump assembly⢠used in⢠Frigidaire washing⤠machines âŁto evacuate wash and rinse water from the tub. the component typically⤠comprises a⤠small electricâ motor coupled to an impeller contained âwithin a molded housing that interfaces with the washer’s drain hose and trap; it is a discrete⤠replaceable part referenced by the manufacturer part number for service and parts ordering.
Functionally, the drain pump removes water from the wash tub at âthe end of fill, washand rinse cycles â˘and âŁduring spin. it is commanded by⤠the washer’s control electronics and interacts with the tub, drain hose, drain trap or lint filter, water level sensing (pressure) systemsand the appliance chassis for mounting andâ sealing.â Proper electrical connection, correct pump orientation, a clear drain path,⣠and intact seals are all required for reliable operation;â when any of those interfaces fail or are obstructed, drainage problems, extended cycle timesor machine fault conditions can result.
In this article readers will find⤠a technical⣠summary of the âpump’s function and typical electrical/mechanical characteristics, guidance on modelâ compatibility and how to verify fitment, common⢠failure symptoms â¤(such as no pumping, reduced flow, â¤unusual noiseor leakage), âŁdiagnostic checks⤠a technician can perform safely (visual inspection, obstructionâ removal, continuity âand voltage checks âper theâ service manual)and practical considerations for replacement such âas connector and hose handling, seal condition, mounting alignmentand safety precautions to follow âduringâ service. The â¤intent⤠is to provide a clear technical reference for technicians, engineersand informed appliance owners âevaluating orâ replacing the 137221600 drain pump assembly.
Table of â˘Contents
- Functional Role and System Integration of the Washer Drain Pump Assembly
- How the 137221600 Frigidaire Washer Drain Pump â¤Works Inside the Appliance: Motor, Impellerand Control Signal Interactions
- Common Failure Symptoms â˘and Diagnostic Indicators of Drain Pump Malfunction
- Compatibility and Supported Applianceâ models: âCross-Reference of⣠Part Numbersâ and Fitment for â˘the 137221600 Drain Pump
- Replacement Considerations and Installation Procedure: Mounting, Sealing, Electrical Connectionsand Torque Requirements
- Troubleshooting and Diagnostics: Continuity, Amperage, Flow Verificationand Error Code Correlation
- Q&A
- The Conclusion
Functional Role andâ System Integration of the Washer Drainâ pump Assembly
The 137221600 Frigidaire Washer Drainâ Pump performs the primary task of evacuating wastewater from the tub during drain and spin cycles and interfaces directly with the washer’s plumbing,⢠electrical â¤harnessand control system. when the washer control âboard issues a drain command-based onâ timers, water-level sensorsor user selection-the pump receives âpower through the⤠harness and â¤its impeller converts electrical energy into flow to push âwater through the drain⢠hose âand out of the machine. Correct mechanical â¤and electrical compatibility âmatters: â˘the pump’s mounting footprint, inlet/outlet hose diameter and orientationand connector pinout must match the chassis and⣠wiring of the appliance to maintain proper flow, prevent leaksand avoid motor overload. for example, installing⢠a pump with a âmismatched outlet orientation can create air traps that slow drainage and⣠trigger extended drain cycles or error codes.
- Common symptoms indicating âpump⤠or integration â¤issues: no⣠drain,slow drainage,humming/noisy motor,or⤠water leakage.
- Key diagnostic âchecks: inspect impeller and housing for â¤obstructions, verify harness voltage during a drain commandand confirm â¤secure hose connections and proper âtrap height.
- Compatibility considerations: confirm connector âŁtypeâ and mounting tabs to ensure a direct replacement and preserve sealing interfaces.
Behavior under fault conditions illustrates the âpump’s role within the system: anâ electrically failed motor willâ result in immediate inability to remove water, while partial blockage reduces flow and can cause âlonger spin times or imbalance faults; â¤leaking â˘seals or⣠cracked housings produce visible water around the base and can affect âother components. Troubleshooting should combine mechanical âinspection (remove debris, check impeller freedom, inspect seals) with electrical verification âŁ(continuity of motor windings, presence of supply voltage during a drain command) â¤and control verification (observe âŁwhether the control âboard is issuing the⣠drain⢠signal). Replacing the pump with a compatible unit restores⣠the intended hydraulic and â¤electrical behavior; technicians shouldâ consult the washer’s service manual to confirm harness pinouts and âmounting details before installation.
| Item | Description |
|---|---|
| Function | Evacuates tub water âduring drain/spin cycles; small single-speed⣠motor driving an impeller |
| Electrical interface | Connector to washer âŁharness; nominal 120 V AC supply⣠in North America-verify model-specific service data |
| Mechanical interface | Hose fittings and chassis⤠mounting tabs; orientation and seal â¤conditionâ affect flow and â˘leak prevention |
How the 137221600 Frigidaire Washer⤠Drainâ Pump Works âinside the Appliance: Motor, Impellerand Control Signal Interactions
The 137221600 Frigidaire Washer Drain Pump is a compact pump assembly that combines a sealed electric motor with a molded impeller inside⢠a housing engineered toâ clear washâ tub water quickly. The motor is typically a singleâphase AC âdesign in North American machines and is energized by the washer’s electronic control via âŁa relay or solidâstate switch; whenâ the control sends â˘the drain command it applies mains power to the pump windings,causing the âshaft and âimpeller to rotate andâ generate centrifugal flow out the drain port. The âimpeller geometry and the housing volute âdetermine flow rate and head âcapacity:â small objects, lint or a partially collapsed drain hose reduce âeffectiveâ flow and increase motor load, which can lead âto overheating or tripping of any thermal protector integrated in the motor assembly. For technicians, a practical bench test is to verify continuity across âthe pump motor terminals, confirm free rotation of the impeller by handand then âapply controlled mains power briefly (with proper safety precautions) to confirm the motor and âŁimpeller produce the âexpected discharge flow and sound pattern.
Control signal interactions âare straightforward functionally but critical in diagnosis: the washer⣠control provides an on/off command and â˘may time the pump run duration; there is no typical speed control, soâ pump performance is binary (running vs.stopped). â¤When the â˘motor is powered, expected behavior âŁis steady rotation with⣠current draw within the â˘manufacturer’s nominal range; a rising current or erratic sound indicates mechanical âŁbinding, partial blockageor electrical degradation â˘of windings. Replacement compatibility requires âmatching electrical rating,â mounting footprintand connector pinout so the pump integrates with the washer’s harness and drain ârouting; mismatches can cause poor sealing, incorrect⢠flow⢠directionor connector overheating. Common âpractical checks include inspecting the impeller for chips, ensuring the inlet screen is clearand confirming the control module actually supplies voltage during a drain cycle using a multimeter or test lamp.
- Typical features: nominal âvoltage⢠(usually â˘120⢠V AC), molded plastic impeller, sealed motor housing, âŁintegrated thermal protection on some units.
- Common symptoms of failure: no run when commanded, humming with no flow â(impeller jammed)or noisy operation indicating impeller damage.
- Compatibility notes: match voltage, connector type, âandâ physical mounting to avoid âleaks or electrical faults.
| Item | Description |
|---|---|
| motor type | Singleâphase AC motor (mains switched by relay/triac) |
| Primary âfunction | Centrifugal impeller discharges tub water through drain port |
| Common failure modes | Impeller blockage, shaft bearing wear, motor winding failure, connector/harness issues |
Common Failure Symptoms and Diagnostic Indicators of Drain Pump Malfunction
The⣠137221600â Frigidaire Washer âŁDrain Pump â is anâ electromechanical assembly that evacuates wash water fromâ the tub by âdriving an impeller through a molded housing. During normal operation the washer’s control board energizes the pump only during drain/spin phases; âthe pump must bothâ recieve the â˘correctâ drive âvoltage â˘and⤠rotate freely against⢠hydromechanical resistance. Typical failure modes include impeller âblockage by debris, âŁworn âbearings or junctions in the motor,⢠and deterioration of the housing or⣠seals that produces leaks. Technicians should consider both hydraulic (blocked hose, clogged â¤pump inlet) and electrical (no drive voltage, open winding) causes when diagnosingâ a non-draining machine as the observable symptom-standing water-can originate upstream of the pump itself.
- No drain/no water⣠removal: tub retains water though timer cycles continue.
- Hummingâ or running without flow: ⣠motor energized but impeller not⤠turning due â¤to jam or mechanical failure.
- Intermittent drain or extended âcycle time: intermittent electrical connection⣠or partial clog.
- Visible leaks or moisture under⣠washer: cracked housing, seal failure, âor loose âhose clamp.
- Control-side behavior: ⢠pump never receives voltage, suggesting wiring, connectoror control board fault rather than the pump motor.
Practical diagnostics start with a visual âŁand manual check: disconnect power, remove access panel, inspect âŁthe impeller for debris and turn it by hand to verify free rotation; then verify harness continuity and observe whether drive voltage is present at the⣠pump âconnector â¤during âa commanded drain.⤠If the pump receives⢠correct drive voltage but⣠the impeller does not rotate, the fault is mechanical (impeller, âŁshaft, bearingsor âinternal motor â¤failure). If â¤there is no drive voltage, trace back through the âharness, door/lid interlocksand controlâ board outputs. When replacing a unit, confirm mechanical mounting points, inlet/outlet orientationsand electrical connector pinout to ensure compatibility; confirm the⣠part number against the washer’s parts list rather than relying solely on physical similarity.
| item | Description |
|---|---|
| Common failure mode | Impeller blockage,worn bearings,or internal motor âwinding/open circuit. |
| Quick diagnostic check | Manual impeller rotation, multimeter check of connector for drive voltage during drain command, continuity of⣠motor windings. |
| Replacement⣠compatibility | Match part number, mounting tabs, hose âfittings,⣠and connector pinout to⤠ensure a â˘direct fit. |
Compatibility and Supported Appliance Models: Cross-Reference of Part Numbers and Fitment for the 137221600 â˘Drain Pump
137221600 Frigidaire Washer Drain â˘pump ⢠serves as the vehicle for moving wash water out of the tub âandâ into⢠the household drain; compatibility is âdefined by mechanical fit, hydraulic interface and electrical connectionsâ rather than model brandingâ alone. Technicians âshould verify the pump’s mounting hole pattern, gasket face and hose-barb orientation â¤against the washer’s drain âpathand confirm the electrical⢠terminalâ type â˘and supply voltage to ensure proper operation. Differences such asâ a rotated âŁimpeller⤠housing, an alternate hose diameteror a different connector style âŁcan prevent a physical orâ reliable âelectrical fit even when part numbers are similar across model families.
- Cross-reference the appliance âmodel number and the pump’s OEM⣠part number in factory parts lists and service manuals.
- Visually compare mounting tab locations and measure hole spacing before attempting installation.
- Confirm electrical terminal âtype and connector pinoutand verify motor voltage rating.
- Check hose-barb diameters and discharge orientation toâ avoid hose⢠kinking or misalignment.
| Item | Description |
|---|---|
| Cross-reference | Use the appliance model number âand 137221600 to locate⢠OEM compatibility listings in parts catalogsâ or service sheets. |
| fitment checks | compare mounting hole spacing,gasket face,and outlet location; verify connector type and motor voltage before purchase. |
when replacing a âdrain pump, âŁperform a âphysical confirmation: remove the old pump and compare it directly toâ the replacementor âŁmeasure mounting points and hose/barb diameters and verify âthe connector pins with âŁa multimeter. For example, a âŁpump that matches the 137221600 external âdimensions may still fail to installâ if its â˘discharge is rotated â90 degrees relative to the original; similarly, a connector âŁwith different âterminal spacing will ârequire an adapter or⢠rewire. Record the appliance model and any service-tag numbers and consult the manufacturer’sâ cross-reference⤠tableâ to confirm compatibility âŁand âavoid repeated service calls.
replacement Considerations and Installation Procedure: Mounting,â Sealing, Electrical Connectionsandâ Torque Requirements
The 137221600 Frigidaire Washer Drain Pump evacuates wash water from the tub⢠and âmounts directlyâ to the washer’s pump âhousing or âbaseplate; replacing it requires matching the pump’s mountingâ flange, electrical â˘connector styleand inlet/outlet hose diameters to the âoriginal assembly. Check the pump body orientation âand seal face so the pump impeller and hoses alignâ without twisting; an incompatible â¤flange or reversed orientation can cause hose stress, leaksor premature bearing loading. Confirm the connector type (typically 2 or 3 quick-disconnect spade terminals) and that replacement wiring meets the original wire gauge and insulation rating to preserve proper motor performance andâ safety in wet environments.
- Before disassembly: disconnect power and drainâ any residual water to prevent shorting and spills.
- Retain or replace gaskets/Oârings and ensure mating surfaces are clean and flat to prevent leaks.
- Fit hoses without kinking and use the correct clamp style; avoid overtightening clamps that deform hose bore.
- Reconnect spade terminals fully and âsecure any strain-relief âor retainer clips âto prevent vibration fatigue.
- After installation, run a short drain cycle to verify flow, leak-free â¤sealsand correctâ motor noise.
Install the pump with â¤hardware that⢠matches the original thread⣠and flange; torque must be sufficient to compress the gasketâ and â˘locate the pump without distorting the housing. Typical mounting-bolt torque for small washer pump flanges⢠is in the range of 25-35 in¡lb (3-4 N¡m)and hose clamps commonlyâ seat at about 20-40 in¡lb (2.3-4.5 N¡m), but verify exact values in theâ machine’s service manual. For electrical connections, use the original connector style⤠and wire gauge âŁ(commonly 18-20 AWG); ensure terminal contact is fully engaged and protected from splash âŁby correct routing and any factory provided covers. In top-load units theâ pump is often accessible from the rear â˘or under a service panel, while front-load units may â˘require partialâ disassembly of the front shroud or tub; plan the sequence so hoses and âwiring remainâ accessible for testing and final inspection.
| Item | Description |
|---|---|
| Mounting-bolt torque | Typical 25-35 in¡lb (3-4 â¤N¡m); confirm with service manual |
| Hose clamp torque | Typical 20-40 in¡lb â(2.3-4.5 N¡m); tighten until seal is secure without deforming hose |
| Connector type | 2-3 quick-disconnect⤠spade terminals; ensure full engagement and insulation |
| Recommended wire gauge | 18-20 AWG for pump motor leads in most âFrigidaire washer models |
Troubleshooting and Diagnostics: Continuity, Amperage, Flow Verificationand Error code correlation
The ⣠137221600 Frigidaire Washer Drain Pump is an electromechanical assembly whose primary diagnostic attributes are motor â¤winding continuity, running amperageand unrestricted hydraulic flow. Technicians typically start with a cold continuity check across the pump motor leads using aâ multimeter; a measurable âŁlow-ohm path (typically under a few hundred ohms for âwound single-phase motors) confirms intact windings, while an â¤open circuit indicates a failed âmotor.â Physical âinspection of the impeller and inlet port complements electrical testing because a free-spinningâ impeller with correct continuity but no water movement often points to blockages, collapsed drain hosesor âstuck check valves rather than an electrical fault. Bench tests and compatibilityâ checks againstâ washer model schematics ensure that⤠replacement with part 137221600 matches⢠the âwasher’s â¤voltage and connector pinout before powered verification.
For âin-service diagnostics,measure running current with a clamp meter while the washer is in its drain cycleâ to correlate electrical behavior âwith hydraulic âperformance and controlâ board error codes. A âfunctioning âpump will draw a modest steady current â(often â˘in the sub-amp to low-amp range depending on model voltage and load);⢠a important drop in â¤current âŁconcurrent with no flow usually indicates an open circuit or poor âsupply, whereas elevated current with restricted or⣠no flow â˘indicates mechanical binding or debris. use a simple flow verification test – route the drain hose into a bucket and activate the drain – â˘to quantify flow and observe pump sound and vibration.Correlate observed âsymptoms with the machine’s diagnostic codes:â long drain or motor fault codes paired with normal continuity but no amperage suggest harness⤠orâ relay issues, while codes plus high⣠amperage and overheating suggest â¤internal motor wear or hydraulic obstruction requiring pump replacementâ or service.
- Isolate power and verify continuity across pump leads.
- Run aâ powered drain âcycle while measuring âŁamperage with a clamp meter.
- Inspect⢠and clear impeller, inlet screen, hoseand check valve âfor restrictions.
- Compare⤠electrical and hydraulic findings âwith washer error codes to localize control vs.⢠pump faults.
| Item | Description |
|---|---|
| Continuity | Low-ohmâ reading across motor leads âindicates intact windings; open circuit âŁindicates failed motor. |
| Running Amperage | Modest steady current (typically hundreds of mA to low amps);â low/no current suggests power/harness issue, high current suggests mechanical load. |
| Flow Verification | Direct hose-to-bucket⣠test confirms hydraulic output â¤independent of electronics. |
Q&A
Whatâ is the 137221600 Frigidaire washerâ drain pump and what does it do?
The 137221600 is an OEM drain pump usedâ on many Frigidaire (and âŁsome ârelated brand)â washing âmachines.Its job âis to â¤pump water outâ of the tub and into the drain⢠line during and after the⣠wash and âspin cycles. It contains a small electric motor and an impeller; whenâ energized it forces âwater out through⤠the drain â¤hose.
What are the â˘most common symptoms âŁof a failing drain pump?
Typical symptoms âinclude:⤠washer won’t drainâ or takes very⣠long toâ drain,washerâ displays a⤠drain error code,loud grinding or rattling noises during drain,pump motor humming without expelling water,or water leakingâ from the pump housing. Sometimes the problem is a clogged hose or trap rather than the⤠pump itself.
How can I diagnose whether the âpump itselfâ is bad or if the problem âis a clog or hose issue?
Start by⤠checking for visible blockages: remove â¤the drain hose and look for âŁobstructions,â and âŁinspect⢠the âpump inlet/filter⤠if yoru model has one. If nothing blocks flow, listen during a drain cycle: a humming âmotor with â˘no â¤flow suggests a jammed impeller or a seized motor. Use a multimeter to check for continuity across the â˘pumpâ motor terminals (should readâ low resistance – a very high or infinite reading â˘indicates an open motor). You can also⣠check that the âŁpump isâ receiving voltage during the âdrain cycle, but only if you⢠are experienced and take proper safety precautions; or else⤠call a technician.
how do I safely test the 137221600 pump with a multimeter and mains voltage?
Unplug the washer and disconnect the pump wiring⢠to check âresistance between the motor terminals-expectâ a low resistance (continuity). Do ânot rely solely on resistance testing⤠to confirm mechanical functionality. If youâ measure live voltage to the pump duringâ a drain cycle, only do soâ if qualified:â restore power, set washer to a drain/spin cycleand measure âŁvoltage at the pump connector (typically mains voltage⤠in the U.S.). if voltage is present but the pump doesn’t run, the pumpâ is faulty.If no voltage is present, the control or wiring is at fault.â always disconnect power beforeâ touching components⢠and followâ lockout/tagout⢠practices âif applicable.
Can the 137221600⢠pump be cleaned/repairedorâ does⢠it âneed full replacement?
Often a pump that’sâ noisy âŁor not âmoving water is caused by debris in the impeller-clearing⣠the obstruction can restore function. Small internal breakdowns (worn bearings,burnt motor windings) usually require replacement rather than repair. Ifâ the motor has electrical failure (open â˘winding) or the impeller is damaged, replace the pump assemblyâ with a new OEM or compatible replacement.
How do I replace the 137221600 drain pump (basic steps and safety tips)?
Basic replacement steps: unplug the washer and turn off the water; place towels and a shallow pan to catch water; âŁaccess the pump by removing theâ front or rear âaccess âpanel per your model’s service instructions; disconnect the pump’s electrical âŁconnector and hose clamps⣠(expect residual⢠water); remove the mountingâ fasteners and âswap in the new pump; reconnect hoses âand wiring, secure panelsand test on a short drain cycle. Always disconnect power before starting work, wear glovesand consult theâ washer’s service manual or âa â¤technician if unsure.
How âdo I confirm compatibility and⤠where âŁshould I buy aâ 137221600 â˘pump?
Confirm compatibility by checking your washer’s âmodel number (usually on the door⣠frame or back panel) and cross-referencing it with the part number on Frigidaire’s parts website or reputable appliance parts retailers. 137221600 is an OEM Frigidaire part number; you can buy it fromâ frigidaire-authorized parts dealers, major appliance âpart websitesor local parts stores. Compare return policies⢠and warranties; OEM parts typically offerâ the best guaranteed fit and reliability.
How much does the pump⢠cost and is⢠it worth replacing myself or hiring a technician?
Part-only cost for a 137221600 pump typically ranges (depending on supplier) from about $30 âto $90.Labor âcosts for a technician vary⢠by regionâ but often add another $100-$200. If you are pleasant⤠with basic appliance repairs, have the rightâ tools, âand can follow safety steps, DIY replacement is usually straightforward. if electrical troubleshooting,complicated disassembly,or warranty âconcerns â˘exist,hire a qualified appliance technician.
The Conclusion
The 137221600 Frigidaire washer drain pump is a critical component that facilitates the efficient removal⢠of wash⢠water, protects⣠theâ tub and electronics from standing waterand â˘helps maintainâ overall cleaning â˘performance. Reliable operation of this pump contributes directly to cycle â˘completion, proper rinsing and spinningand prevention of leaks or overflow conditions. Because it interfaces with the washer’s plumbing⢠andâ electrical systems, its condition materially affects appliance reliability and user convenience.
Timely and accurate diagnosis of drain-pump issues is essential. Symptoms such as abnormal noises, incomplete draining, water â˘remaining inâ the drum, â¤errorâ codesor visible leaks should prompt inspection of the pump, âhosesand associated electrical connections. Distinguishing between clogs,electrical faults,and mechanical failure ensures the correct âcorrective action and avoids unneeded part replacement.
When replacement is required, using the correct 137221600 Frigidaire washer drain pump and following manufacturer guidelines-along with proper safety practices âor professional â˘service-helps restore normal operation âandâ can extend the service life of the washer. Thoughtful diagnosis and appropriate â¤replacement strikeâ aâ balance between cost-effectiveness and long-term appliance performance, â˘minimizing downtime and reducing the risk of secondary damage from unresolved drainage problems.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
