241860801 Frigidaire Refrigerator Ice Container Assembly is the molded ice-storage and delivery component used in Frigidaire refrigerators equipped with automatic ice makers and, in some configurations, built-in dispensers. As an assembly it typically comprises the ice bin and the interfaces needed to receive ice from the ice maker and present or convey that ice to a dispenser or door opening; in certain models the assembly also provides mounting points and mechanical coupling for an auger or paddle used in dispensing.
Within the appliance,the ice container serves as the intermediate storage and handling point between the ice-making module and any user-accessible delivery mechanism. It interacts mechanically with the ice maker’s ejection components and,where present,with the auger,motor coupling,or paddle assembly that moves ice toward the dispenser; it also affects airflow and thermal conditions around the ice to limit clumping. Many designs include level detection (mechanical arms or electronic sensors) or stop mechanisms that signal the ice maker to stop producing when the bin is full, so the container’s placement, seals and clearances are integral to reliable operation.
This article will explain the ice container’s functional role and typical construction, describe how to verify compatibility with specific Frigidaire models, identify common failure symptoms (such as, dispenser jams, continuous ice production, or iced/compacted contents), and provide structured troubleshooting steps. It will also cover practical replacement considerations such as checking mounting alignment and actuator engagement, inspecting for cracks or obstructions, verifying sensor or stop-arm operation, and the key fitment details technicians and owners should confirm before installing a replacement assembly.
Table of Contents
- Function and Role of the Ice Container Assembly within Frigidaire Refrigerator Ice Production and Dispensing
- How the 241860801 Frigidaire Refrigerator Ice Container Assembly interfaces with the Ice Maker,Sensors,and Dispenser Mechanisms
- Common Failure Symptoms: Ice jams,Melt-water Leakage,Sensor Faults and Mechanical Wear Indicators
- Compatibility,Replacement Considerations and Step-by-Step Installation Checklist for the Ice Container Assembly
- Q&A
- In Conclusion
Function and Role of the Ice container Assembly within Frigidaire Refrigerator Ice Production and Dispensing
The 241860801 Frigidaire Refrigerator Ice Container Assembly functions as the primary ice reservoir and mechanical interface between the icemaker and the dispenser. It receives discharged cubes from the icemaker, provides short-term storage, and guides ice into the dispenser chute or auger mechanism. Mechanical features include molded mounting tabs and a chute lip that must align with the dispenser drive; many designs also include openings for an optical or mechanical fill sensor and a drain path to prevent pooled water from refreezing on the ice. In practice, the container’s geometry, material stiffness, and clearances determine how reliably cubes flow and whether bridging or jamming occurs under normal load and temperature cycling.
- Primary roles: collection, controlled release, and interface with dispenser mechanisms.
- Common behaviors: cubic ice flow, susceptibility to bridging when partially filled, and sensitivity to misalignment with auger or chute.
- Compatibility concerns: model-specific mounting points and sensor cutouts; replacements must match the original interface dimensions.
Technicians and owners should treat the assembly as a dimensional and sensor-coupling part rather than an electrical component: failures are typically mechanical (cracks, warped lips, misaligned mounts) or due to ice accumulation and sensor occlusion. For example, a cracked bin will allow cubes to fall irregularly and can interfere with the dispenser auger drive; a warped lip can prevent the fill sensor from detecting ice level correctly. Verify compatibility with the refrigerator model and check that the container seats fully into its supports and that any sensor windows or actuators align with the refrigerator chassis; replacing with the correct 241860801 part preserves the designed clearances and sensor relationships critical for reliable ice production and dispensing.
| Item | Description |
|---|---|
| capacity | Typical short-term storage (varies by model; designed to hold ice produced between harvest cycles) |
| Material | Rigid ABS or polycarbonate with molded mounting features and clear sensor windows |
| Interface | Mounting tabs, dispenser chute lip, sensor cutouts/actuator recesses |
How the 241860801 Frigidaire Refrigerator Ice Container assembly interfaces with the Ice Maker, Sensors, and Dispenser Mechanisms
The 241860801 Frigidaire Refrigerator Ice Container Assembly functions as the physical and sensing interface between the ice maker harvest mechanism and the user-facing dispenser. It captures ejected cubes, aligns the cube flow to the dispenser chute, and carries the actuator surfaces used by bin-full detection systems. Depending on refrigerator model, the assembly either provides a mechanical trip that engages a cabinet-mounted microswitch or a mounting surface and connector for an electronic/optical sensor; both arrangements signal the ice maker control board to stop harvesting when the bin reaches its designed capacity. Proper seating of the container into its locating tabs and screw bosses ensures consistent actuation,and molded guides in the outlet reduce cube bridging that would otherwise impair dispenser throughput.
Compatibility and expected behavior vary with sensor type and dispenser architecture, so technicians should confirm the bin type during replacements and inspections. Practical diagnostics include verifying switch continuity or optical sensor output, checking for broken locator tabs that produce false full/empty indications, and inspecting the outlet for obstructions that cause jams at the auger or paddle. Example troubleshooting steps: if the ice maker continues to run after the bin appears full, observe the actuator arm travel and test the sensor signal; if cubes fail to dispense, verify that the container’s outlet aligns with the dispenser auger and that the feeder surfaces are not warped or cracked. These checks isolate whether the issue is mechanical seating, a failed sensor/actuator, or a dispenser alignment problem.
- Mounting and mechanical guides: ensure correct seating to maintain sensor timing and reduce bridging
- Sensor interface: mechanical microswitch vs. optical/electronic connector-match during replacement
- Dispenser alignment: outlet orientation and auger engagement affect feed reliability
- Common diagnostics: continuity tests, visual alignment checks, and obstruction inspection
| Item | Description |
|---|---|
| Mounting interface | Locating tabs and screw bosses that establish position relative to ice maker and dispenser |
| Sensor/Actuator | Mechanical trip or optical/electrical sensor surface that signals bin-full condition |
| Outlet alignment | Molded chute and guides to feed cubes to the auger; misalignment causes jams |
common Failure Symptoms: Ice Jams, Melt-Water Leakage, Sensor faults and Mechanical Wear Indicators
The 241860801 Frigidaire Refrigerator Ice Container Assembly functions as the receptacle and interfacing mechanism between the freezer ice-making module and the dispenser/auger system. It collects and stores dispensed cubes, provides the drive interface for the auger, and houses seals, drain channels, and any level sensors used to regulate ice production. typical failure modes arise from physical obstruction (ice bridging or agglomeration when partial thaw/refreeze occurs), degraded seals or misaligned mounting that allow melt-water to escape the bin, and wear on rotating components or sensor contacts that disrupt normal operation. Such as,a short door-open event that partially melts bin ice can produce irregular shards that jam the auger throat once refrozen; similarly,a clogged drain channel or torn gasket will route melt-water into the freezer cavity instead of the designed drain path.
- Ice jams – agglomerated or bridged ice in the bin or chute that prevents the auger from turning and causes motor stall.
- Melt-water leakage – pooled water beneath the bin or frost patterns indicating blocked drains or failed seals.
- Sensor faults – intermittent level sensing or continuous ’full’ signals caused by corroded contacts or misaligned probes.
- Mechanical wear – stripped auger teeth, loosened mounting lugs, or fatigued plastic components that produce play or binding.
Diagnosing these symptoms involves visual inspection for broken plastics and obstructions,measuring continuity and resistance of level sensors and auger motor windings,and verifying that drain paths are clear and gaskets seat uniformly. Replacement of the assembly is recommended when cracks, stripped gear surfaces, or persistent electrical faults appear; OEM compatibility is persistent by the 241860801 part number and proper transfer of any clips or sensor brackets during installation. Simple service actions include clearing ice with warm air (power removed), cleaning the drain channel, and confirming motor torque under load; if electrical faults persist after mechanical remediation, replace the assembly or the associated sensors to restore reliable operation.
| Item | description |
|---|---|
| Ice jam | Ice bridging in the bin or chute that prevents auger rotation and trips motor overload. |
| Melt-water leakage | Blocked drain or damaged gasket allowing melt to escape into the cabinet rather of the drain line. |
| Sensor fault | Corroded or misaligned level sensor producing false full/empty signals. |
| Mechanical wear | Worn auger teeth, stripped drive features, or cracked housing causing binding or loss of engagement. |
Compatibility,Replacement Considerations and Step-by-Step Installation Checklist for the Ice Container Assembly
The 241860801 Frigidaire Refrigerator Ice Container Assembly serves as the ice storage and delivery interface inside the freezer,providing the structural bin,mounting features,and mating surface for the auger/dispense mechanism and level sensors. Its design directly affects ice release behavior, bridging potential, and sensor readings: small differences in tab spacing, bin depth, or auger-coupling geometry can change engagement depth, misalign optical or magnetic level switches, or permit frost accumulation that interferes with the dispense path. Verify compatibility by matching the refrigerator model number and OEM cross-reference, and inspect the bin’s mounting tabs, sensor cutouts, and coupling splines rather than assuming interchangeability by visual similarity alone.
- Disconnect power and empty the ice from the bin before beginning work.
- Confirm refrigerator model number and compare tab spacing and auger-coupling type to the replacement bin.
- Remove fasteners/shelves to access the bin; inspect mounting tabs and sensor mounts for cracks or distortion.
- Install the replacement so the auger spline fully engages without binding; hand-rotate the auger to verify clearance.
- Reattach sensors and verify alignment; secure fasteners to restore original geometry and seal contact.
- Restore power and run the ice-maker/dispenser diagnostic to confirm auger rotation,sensor transitions,and absence of scraping or ice bridging.
| item | Description |
|---|---|
| Tools | Phillips screwdriver, 1/4″ socket, flashlight, small flat tool for clips |
| Mounting fastener | Typical screw or snap-tab; avoid over-torquing snap-tabs to prevent cracking |
| Typical clearance | 1-3 mm radial clearance between auger and bin wall to prevent contact |
| Sensor check | Verify optical/magnetic sensor alignment and clean optical windows of frost/debris |
Replacement considerations include assessing the bin for hairline cracks at interface points, checking the auger coupling splines for wear, and ensuring the bin lip provides a consistent seal to prevent frost buildup that causes ice bridging. after installation, observe at least two dispense cycles: check for smooth auger movement, correct sensor state changes, and normal sound levels; if scraping or incomplete dispense occurs, recheck engagement depth and tab positioning and adjust by small increments untill alignment and function are restored.
Q&A
What is the 241860801 Frigidaire Refrigerator Ice Container Assembly?
The 241860801 is an OEM ice container assembly for certain Frigidaire refrigerators. It is the removable ice bin that collects and stores ice produced by the ice maker. On some refrigerator models the “ice container assembly” may also integrate the auger housing or fittings for the ice-dispenser mechanism, but on others it is indeed just the bin itself.
How do I know if this part is compatible with my refrigerator?
to confirm compatibility, check your refrigerator model number (usually on a sticker inside the fresh-food compartment, on the door frame, or on the cabinet wall). Then search the part number 241860801 on the Frigidaire/Electrolux parts site or an authorized parts dealer and verify that it is indeed listed for your exact model. Do not rely only on fridge brand – model-specific fitment is crucial.
How do I remove and replace the ice container assembly?
General steps: unplug the refrigerator or turn off power at the breaker,remove any items from the freezer shelf in front of the bin,slide the freezer shelf out if needed,pull the ice bin straight forward and lift out.If the assembly interfaces with an auger drive or electrical connector, disconnect that connector carefully. To install, position the bin so mounting tabs/rails align, connect any drive or electrical connectors, slide it into place and restore power. Use the service manual for model-specific instructions and remove ice maker power before disconnecting any electrical connections.
What tools and safety precautions are needed to replace this part?
Most replacements require only basic tools: a Phillips screwdriver for any cover screws and a towel to catch spilled ice/water. Important safety steps: unplug the appliance or turn off the breaker before working, wear gloves to protect your hands from sharp edges and cold, and handle plastic tabs gently to avoid breaking them. if the assembly has an electrical connector, ensure power is off while disconnecting and reconnecting.
Why is my ice jamming or not dispensing even after replacing the ice bin?
Common causes: ice blockages in the bin or chute, misalignment of the bin/auger coupling, broken auger or dispenser motor, or frozen ice clumps. After replacing the bin, confirm the bin is seated correctly and the auger drive is engaged (but not forced). Defrost any packed ice, crush or remove oversized cubes, and test the dispenser. If the auger motor is not turning or you hear grinding, the problem might potentially be the motor or drive, not the bin.
Can I clean the 241860801 ice container assembly in the dishwasher?
Hand washing is recommended. Remove the bin and wash with warm water and mild detergent, rinse thoroughly, and dry wholly before reinstalling. Dishwashing can warp or damage some plastic bins due to high temperatures; check the owner’s manual for any dishwasher-safe designation, but when in doubt, avoid the dishwasher.
What are signs the ice container assembly needs to be replaced?
Replace the assembly if you see cracks or splits that allow ice to spill or cause clogs, broken tabs or rails that prevent proper seating, severe warping, or persistent dispenser jams that aren’t fixed by clearing ice. Cosmetic scratches aren’t usually a problem, but structural damage that affects fit or operation warrants replacement.
Where can I buy an authentic 241860801 part and should I use aftermarket alternatives?
You can buy the OEM 241860801 from Frigidaire/Electrolux authorized parts dealers, appliance parts websites, or local appliance repair centers. OEM parts guarantee fit and finish for supported models. Aftermarket alternatives may be less expensive but can vary in fit, material quality, and longevity-verify return policy and compatibility before purchasing.
In Conclusion
The 241860801 Frigidaire refrigerator Ice Container Assembly serves a focused but essential function within compatible refrigerators: collecting, storing and presenting ice in a controlled manner so the dispenser and ice delivery mechanisms can operate reliably. As an interface between the freezer environment and user access, a sound ice container helps prevent jams, limits contamination of ice, and contributes to consistent dispensing performance and overall appliance hygiene.
Because symptoms such as irregular dispensing, ice blockage or unusual noises can originate from multiple components, proper diagnosis is important before replacing the ice container. Verifying that the container itself is damaged, cracked, misshapen, or otherwise impaired – and ruling out related causes such as auger or motor faults, sensor issues, freezer temperature or ice maker malfunctions – helps ensure that replacement is necessary and cost-effective.
When diagnosis indicates the ice container is the source of the problem, timely replacement with a compatible part restores intended function and reduces the risk of further wear or secondary damage to the dispensing system. Using the correct assembly and ensuring proper installation – or engaging a qualified service technician when appropriate - preserves appliance performance and longevity while minimizing downtime and needless expense.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok