807117001 Frigidaire Dishwasher Drain Hose is a replaceable fluid-conveyance component designed for the wastewater discharge path of compatible Frigidaire dishwashers. The part is a flexible drain hose-typically constructed from reinforced rubber or PVC with molded fittings-that connects the dishwasher’s internal drain outlet or drain pump to the household drain system, garbage disposal, or an air gap assembly. As a standard service part, it is indeed intended to withstand hot, soapy water, detergents and the mechanical stresses of repeated installation and routing within cabinetry.
Inside the appliance, the drain hose serves as the primary conduit through which the dishwasher’s drain pump expels wastewater from the tub; it thus interfaces directly with the drain pump outlet, clamps or ferrules, and any downstream fixtures such as an air gap, sink tailpiece or disposal. Proper hose routing and secure connections are vital to prevent siphoning, backflow and leaks; the hose must also maintain adequate internal diameter and smooth flow characteristics to avoid trapping food debris that can lead to clogs. In service diagnostics it is often inspected alongside the drain pump, check valve and fittings because failures in any of these elements can produce similar symptoms at the system level.
this article will describe the functional role of the 807117001 drain hose, outline model compatibility and common connection types, identify typical failure symptoms (such as leaks, kinks, blockages and non-draining cycles), and present step-by-step troubleshooting checks technicians and owners can perform. It will also cover practical replacement considerations including correct hose length and diameter selection, proper routing to form an anti-siphon loop, clamp and seal best practices, and safety precautions to observe during removal and installation. The focus is on providing actionable technical guidance for diagnosing, servicing and replacing the component in a workshop or field habitat.
Table of Contents
- Function and Role of the Dishwasher Drain Hose in Wastewater Evacuation and Backflow Prevention
- How the 807117001 Frigidaire Dishwasher Drain Hose Works Inside the Appliance: Fluid Path, Connections, and Material Properties
- common Failure symptoms: Leaks, Blockages, Kinking, and Pump Overload indicators
- Compatibility, Replacement Considerations, and Installation Best Practices for the 807117001 Frigidaire Dishwasher drain Hose
- Q&A
- The Conclusion
Function and role of the Dishwasher Drain Hose in Wastewater Evacuation and Backflow Prevention
The 807117001 Frigidaire Dishwasher Drain hose provides the primary hydraulic path that evacuates wash and rinse water from the dishwasher pump to the household drain system.This hose must withstand intermittent pressure pulses from the drain pump,route wastewater without trapping air,and be installed to prevent reverse flow; proper backflow prevention is achieved mechanically by routing the hose as a high loop under the countertop or by connecting to an air gap device. In some installations a one‑way (check) valve is integrated into the hose assembly – when present, the valve must be oriented in the pump‑to‑drain direction to avoid restricting normal drainage or allowing siphoning back into the tub.
Functionally and mechanically compatible connections are essential: the hose must match the dishwasher’s pump outlet diameter, the house plumbing inlet (garbage disposal or tailpiece), and accept standard worm‑drive or clamp fasteners for a leak‑tight seal.During installation keep the hose free of sharp bends, low spots, and compression by routing it with a consistent rise and securing it at intervals to prevent vibration wear; common service indicators that the hose requires attention are slow drain times, intermittent leakage at fittings, audible gurgling (siphon action), or visible cracks in the hose wall. For replacement, choosing a hose with equivalent material resilience and connector style ensures long‑term compatibility and reduces the need for adapter fittings.
- Primary roles: convey wastewater, isolate pump pulses, and contribute to backflow prevention when properly routed or paired with an air gap/check valve.
- Common symptoms of failure: leaks, kinks restricting flow, siphon gurgling, and debris accumulation causing slow drains.
- Installation cues: maintain a high loop or air gap, match connector sizes, and secure hose to avoid abrasion and sagging.
| Item | Description |
|---|---|
| material | Flexible, chemical‑resistant thermoplastic or rubber designed to tolerate hot wastewater and detergent exposure |
| Connections | Match pump outlet and drain inlet; typically secured with worm clamps or band clamps for leak control |
| Service considerations | Inspect for kinks, cracks, and blockages; ensure correct routing for high loop or air gap compliance |
How the 807117001 Frigidaire Dishwasher Drain Hose Works Inside the Appliance: Fluid path, Connections, and Material Properties
The 807117001 Frigidaire Dishwasher Drain Hose carries wastewater from the dishwasher’s sump/pump assembly to the household drainage system or an air gap. During the drain cycle the pump generates positive pressure that pushes liquid through the hose while the hose routing-typically a high loop or an air gap-prevents backflow and sewer gas entry.As flow is pump-driven and gravity-assisted, the hose must maintain an unobstructed bore and proper slope; internal corrugations or a smooth-lined reinforced tube affect flow resistance and clog propensity, so the hose design balances versatility with a sufficiently smooth internal surface to limit trapping of food debris and solids expelled by the pump.
Connections are usually a slip-fit or barbed engagement at the pump outlet secured with a screw-type clamp and a similar clamp or threaded adapter at the sink tailpiece or air gap. The hose is commonly made from heat- and chemical-resistant polymers (reinforced PVC or EPDM variants are typical) that resist softening from detergents and elevated water temperatures while retaining flexibility to avoid kinks. Technicians should verify inner diameter, length, and fitting style when replacing the hose to ensure compatibility with the appliance and drain fittings; if the hose shows cracks, flattening, or hardening, replacement with an equivalent part specified for Frigidaire models is recommended to restore reliable drainage and prevent leaks.
- Key connection points: pump outlet clamp, air gap or tailpiece clamp.
- Routing requirement: maintain a high loop or air gap to prevent siphoning.
- Failure symptoms: slow drain, visible leaks, intermittent gurgling from sink.
- Replacement checks: match ID, length, material resistance, and clamp type.
| Item | description |
|---|---|
| Material | Reinforced PVC or EPDM blend offering heat and chemical resistance with flexibility to resist kinking. |
| Typical connection | Barbed/slip fit at pump outlet and tailpiece or air gap, secured with screw clamps. |
| primary function | Convey pump-displaced wastewater to household drain while preventing backflow and maintaining a sealed system. |
Common Failure symptoms: Leaks, Blockages, Kinking, and Pump Overload Indicators
The 807117001 Frigidaire Dishwasher Drain Hose carries discharged wash water from the dishwasher pump to the household drain or disposer; it must maintain an unobstructed internal passage, a secure mechanical connection at both the pump outlet and the sink/disposer inlet, and resist repeated flexing and heat exposure. This hose interfaces with the dishwasher’s pump housing and the sink-side plumbing using either clamp-type slip connections or molded bead fittings, so compatibility is persistent by matching the hose inner diameter, end fitting type, and length to the dishwasher model and the routing required for a high loop or air-gap. In practice, a correctly specified replacement hose restores designed flow characteristics and prevents backflow, but a hose with the wrong bore, insufficient length, or incompatible end fitting will leak or restrict flow even if physically attached.
Common failure modes manifest as observable leaks at connection points or along the hose body,progressive flow restriction from internal blockages,and mechanical kinking or collapse where the hose is bent too sharply; these conditions frequently produce secondary symptoms at the pump such as increased motor current draw,the pump motor stalling or humming,or thermal trips in the control board. Technicians can diagnose problems by running a drain-only cycle while inspecting hose routing and connections, disconnecting and flushing the hose to verify unobstructed flow, and measuring pump current during a drain event to detect overload caused by restricted outflow. Simple corrective actions include re-seating and re-clamping fittings, removing trapped debris or grease, rerouting and supporting the hose to eliminate sharp bends, and replacing hoses that are brittle, sliced, or permanently deformed.
- Leaks: Water at the pump outlet or sink connection caused by loose clamps,split hose material,or degraded sealing surfaces.
- Blockages: Slow draining or standing water from food debris, grease buildup, or foreign objects lodged in the hose or trap.
- Kinking: Flow restriction and pressure buildup where the hose is sharply bent, frequently enough under cabinetry or behind the unit.
- Pump overload indicators: Humming, tripping, or long drain cycles indicating the pump is working against restricted flow.
| Item | Description |
|---|---|
| Typical failure location | Pump outlet collar and sink/disposer connection – check clamps and bead ends for wear. |
| Quick diagnostic | Disconnect hose and blow through or run water to confirm free flow before replacing pump. |
| Practical remedy | Flush or clear debris, reposition to remove kinks, replace hose if cracked, soft, or collapsed. |
Compatibility, Replacement Considerations, and Installation Best Practices for the 807117001 Frigidaire Dishwasher Drain Hose
The 807117001 Frigidaire Dishwasher Drain Hose is the flexible conduit that carries wastewater from the dishwasher pump to the household drain, garbage disposal, or air gap. Constructed to tolerate hot, detergent-laden water and periodic mechanical flexing, the hose interfaces with the dishwasher pump outlet and a host plumbing connection types (barbed fitting with worm-drive or spring clamps, or quick-disconnect fittings on some models). Functionally, the hose must maintain flow without kinking, resist softening or cracking from heat and detergents, and allow a proper high loop or air gap to prevent backflow; deterioration typically appears as external cracking, swelling, or internal pinhole leaks that reduce flow and allow contamination back toward the appliance.
When replacing or installing this drain hose, match the outlet fitting style, inside diameter, and required length for strain-free routing; if the OEM hose is not available, choose an equivalent material rated for elevated temperatures and detergents and use compatible clamps. Best practices include establishing a high loop or connecting to a local code-required air gap, avoiding tight bends or compression against sharp edges, securing the hose to prevent vibration wear, and pressure-testing the connection by running a drain cycle and inspecting for leaks. Technicians should also verify that the pump outlet orientation and the disposal/drain inlet align to avoid torsion on the hose during installation.
- Measure length and inner diameter at the pump outlet before ordering replacement.
- Use appropriate clamps (worm-drive or crimp) and avoid over-tightening that can cut the hose.
- Route with gentle curves and secure supports to prevent kinks and abrasion.
- Confirm presence of high loop or air gap per local plumbing codes to prevent backflow.
| Item | Description |
|---|---|
| Part | 807117001 Frigidaire Dishwasher Drain Hose – drain conduit between pump and household drain |
| Common connections | barbed pump outlet with clamp, quick-disconnect on some models; match fittings before replacement |
| typical failure modes | Cracking, softening, pinhole leaks, kinking, clamp corrosion |
| Installation checks | Length, ID/OD compatibility, secure clamps, high loop/air gap, leak test |
Q&A
What is Frigidaire part 807117001 and which dishwashers does it fit?
Part 807117001 is an OEM replacement drain hose sold for Frigidaire dishwashers. It is indeed intended to replace the original drain hose on select Frigidaire/Frigidaire Gallery/Electrolux models. Because Frigidaire uses several different hose configurations across models and years, always confirm fit by matching your dishwasher model number (usually on the door frame) to the parts listing before ordering.
How can I tell if the drain hose is the reason my dishwasher won’t drain?
common symptoms of a failing or clogged drain hose include standing water in the tub after a cycle, gurgling sounds during draining, visible leaks under the dishwasher, or error codes related to draining. To isolate the hose, inspect it for kinks, crushes, or visible damage, and detach it to check for blockages by flushing water through it. Also check upstream components (filter,drain pump,garbage disposal/air gap) before replacing the hose.
Can I replace the hose myself and what tools are required?
Yes – most technicians and handy homeowners can replace the hose. Basic tools: screwdriver (flat or Phillips, depending on clamps/panels), pliers, bucket/towels to catch water, and possibly hose clamps or a nut driver. Steps: disconnect power, turn off water if needed, remove lower access panel, loosen clamps at the dishwasher outlet and at the sink/disposal/air gap, remove the old hose, route the new hose without kinks, attach and tighten clamps, restore power and run a test cycle.
Does part 807117001 include clamps or elbow fittings, or do I need to buy additional parts?
Packaging can vary. Some suppliers sell the hose by itself while others sell it as a kit with clamps or an elbow. Before installing, check the product description and your parts package. If clamps are not included, use stainless-steel worm-gear clamps or the manufacturer-recommended clamp type to ensure a secure, leak-free connection.
Can I use a worldwide drain hose as a substitute for part 807117001?
You can use a universal dishwasher drain hose if it matches the necessary diameter, is rated for dishwasher temperatures, and is long enough to be routed correctly without kinking.an OEM hose is recommended for guaranteed fit and material compatibility,but a properly sized and heat-resistant universal hose is an acceptable substitute.
How should the drain hose be routed to prevent drainage problems or leaks?
Route the hose with a high loop secured as high as possible under the countertop, or through an air gap if local codes require one. The high loop prevents backflow from the sink/disposal into the dishwasher. Avoid sharp bends, kinks, or pinching behind the cabinet, and make sure the hose is not in contact with moving parts. Secure it with clamps or mounting brackets to prevent vibration wear.
What precautions should I take when connecting the hose to a garbage disposal or sink drain?
If connecting to a garbage disposal, ensure the knockout plug has been removed from the disposal inlet.Secure the hose to the disposal/tailpiece with a proper clamp. If an air gap is installed, connect the hose from the dishwasher to the air gap inlet and from the air gap outlet to the sink/drain. Always tighten clamps firmly but avoid overtightening plastic fittings. Disconnect power to the dishwasher before working on connections.
Is a damaged drain hose repairable, or does it need to be replaced?
Minor clogs can be cleared by flushing or using a flexible brush, but physical damage such as cracks, splits, severe kinking, or heat degradation means the hose should be replaced. Temporary repairs (tape or pipe repair sleeves) are not reliable long-term solutions for a dishwasher hose because of temperature, detergent exposure, and pressure during pump operation. Replace the hose with an OEM or equivalent-rated replacement for safety and longevity.
The Conclusion
The 807117001 Frigidaire dishwasher drain hose serves a critical role in channeling wastewater from the dishwasher to the household drain system. properly installed and intact, this hose ensures efficient drainage, helps prevent backflow and leaks, and contributes to reliable dishwasher performance and household water safety. Its material, routing and connection integrity all influence appliance operation and long-term durability.
Timely diagnosis and, when needed, replacement of the drain hose are essential to avoid more serious issues such as standing water, unpleasant odors, water damage or motor strain. Visible signs of wear-cracks, kinks, loose fittings, discoloration, or persistent drainage problems-warrant inspection and corrective action. Addressing these symptoms early minimizes repair costs and reduces the risk of secondary damage to cabinetry and flooring.
When replacement is appropriate, using the correct 807117001 part or a compatible equivalent and following manufacturer installation guidelines will help restore proper function and maintain warranty coverage where applicable. Routine visual inspections, proper routing and secure clamp connections, combined with safe working practices or professional assistance when necessary, will keep the drain system functioning reliably and extend the service life of the dishwasher.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok