WD24X10062 GE Dishwasher Drain Tube Assembly is a factory-designated drain hose assembly used in GE dishwashers. It is a fluid-transfer component-typically a molded or corrugated plastic/rubber hose with specific fittings and retention features-designed to carry wastewater from the dishwasher sump or drain pump to an air gap,garbage disposal or household drain connection.
Inside the appliance the drain tube assembly interfaces directly with the dishwasher drain pump and the external drain path, and it plays a central role in fluid management and system sealing. Properly routed and connected, the tube provides a path for pump-displaced wastewater while helping to prevent backflow and siphoning when combined with the appliance’s air gap or high loop. The tube is subjected to temperature cycles, chemical exposure from detergents, mechanical stress from clamps and routing, and pressure pulses from the pump-conditions that determine its expected lifetime and common failure modes.
This article will explain the drain tube’s function and typical installation points, outline compatibility considerations and identifying marks to confirm the correct replacement part, and describe common failure symptoms such as leaks, kinks, blockages and odors. It will also cover practical troubleshooting steps to isolate drain-tube issues from pump or disposal failures and discuss replacement considerations including correct length, diameter, fittings, clamp selection and routing practices to restore reliable drainage and prevent recurrence.
Table of contents
- Functional Role of the Drain Tube Assembly in Dishwasher Drainage and Pump Interface Systems
- How the WD24X10062 GE dishwasher Drain Tube Assembly Works Inside the Appliance
- Common Failure Symptoms, Leak Patterns, and Flow Restrictions of the Drain Tube assembly
- Replacement Considerations, Compatibility, and Step‑by‑Step Installation Procedures for the Drain Tube Assembly
- Q&A
- In summary
Functional Role of the Drain Tube Assembly in Dishwasher Drainage and Pump Interface Systems
The WD24X10062 GE Dishwasher Drain Tube Assembly transfers discharged wash water from the dishwasher tub through the drain pump to the household drain or garbage disposal. It connects directly to the pump outlet with a ribbed socket or molded cuff and is retained by a hose clamp or integral clip to maintain a fluid-tight seal under the pump’s pulsating discharge. Proper installation requires routing a high loop or connection to an air gap to prevent siphoning; incorrect routing, sharp bends, or improperly seated clamps increase backpressure on the pump, promote residual water retention, and can cause slow draining, gurgling, or premature pump wear.In field repair, verify that the tube ID matches the pump outlet, that the material is flexible enough to avoid kinking, and that any built-in check valve or molded features align with the system’s drainage scheme before restoring service pressure or running a drain cycle.
The assembly must withstand temperature cycling, repeated pressure pulses from the pump impeller and occasional abrasive particulates carried in wastewater; material softness and wall thickness determine resistance to collapse and thermal expansion. typical symptoms of a failing or incompatible tube include visible leaks at the pump connection, intermittent siphoning, reduced flow rate, or audible cavitation from trapped air. Practical inspection and service steps include checking clamp torque, confirming proper high-loop or air-gap placement, and replacing tubes showing hardening, cracking, or deformation to restore correct pump interface and hydraulic performance.
- Material: heat-resistant elastomer to resist long-term exposure to hot wash water.
- Connection style: ribbed slip-fit or molded cuff with clamp for pump outlet compatibility.
- Critical dimensions: inner diameter (affects flow and pump load) and length (routing tolerance).
- Common failure modes: kinking, abrasion at mounting points, clamp leaks, and hardening with age.
| item | Description |
|---|---|
| Inner Diameter | Typically sized to match pump outlet; affects flow rate and backpressure. |
| Length | Provides routing allowance for a high loop or air gap without tension. |
| Material | Heat- and chemical-resistant elastomer; resists collapse under pump suction. |
How the WD24X10062 GE Dishwasher Drain Tube Assembly Works Inside the appliance
The WD24X10062 GE Dishwasher Drain Tube Assembly is the flexible conduit that transports wastewater from the dishwasher drain pump to the household drain, air gap, or garbage disposal. Inside the appliance it must accommodate pressure pulses from the pump, resist hot wash temperatures and detergent chemistry, and provide a reliable sealed connection at both the pump outlet and the external drain fitting. Proper operation depends on an unobstructed inner bore, secure hose clamps or factory quick-connect fittings, and correct routing so the tube does not collapse, chafe, or allow backflow into the tub during pump-off periods.
Compatibility and practical service considerations center on matching connector diameter, length, and mounting orientation to the specific GE chassis and drain configuration.When replacing the assembly verify that the connector style mates with the pump spigot or air gap and that the tube can be routed to form a high loop or be tied into an air gap as required by local codes; this prevents siphoning and minimizes odor or contamination risk. Technicians commonly inspect the tube for splits, soft spots, or internal obstructions when diagnosing standing water, intermittent draining, or leaks; replacing the assembly is a straightforward repair when the tube shows mechanical or chemical degradation.
- Common symptoms of a failing tube: persistent standing water, slow draining, visible leaks at fittings, or dishwasher odors.
- Installation checks: confirm connector fit, secure clamps, avoid kinks, and route for a high loop or air gap.
- Material behaviour: designed to tolerate heat and detergents but will harden or crack with age and chemical exposure.
- Compatibility tip: confirm length and connector type against the appliance model before ordering replacement parts.
| Item | Description |
|---|---|
| Function | Conveys wastewater from the dishwasher drain pump to the house drain, air gap, or disposal. |
| material | Heat- and chemical-resistant flexible tubing (rubber/synthetic elastomer typical). |
| Connector | Machine-specific spigot or quick-connect; verify diameter and style for proper mating. |
| Service notes | Inspect for cracks, clogs, and secure attachments; replace if deformed, leaking, or restricted. |
Common Failure Symptoms, Leak Patterns, and Flow Restrictions of the drain Tube Assembly
The WD24X10062 GE Dishwasher Drain Tube Assembly is the flexible conduit that channels discharge from the dishwasher pump to the household drain or air gap. In normal operation the tube must retain its internal diameter, maintain a smooth bore free of debris, and be secured at both ends with clamps sized to the OEM fittings; mismatch in diameter or improper clamps alters hydraulic head and can permit leaks. Compatibility is primarily determined by the diameter and end fittings specified by GE for the model family; replacing with an incorrectly sized or stiffer material can produce kinks, excessive bend radii, or disconnections that manifest as drainage issues or external leakage.
- standing water or slow drain cycles despite a working pump.
- Gurgling or sputtering noises during drain as air and water mix in a partially blocked tube.
- Visible drips or wetness beneath the dishwasher at hose connection points or along the hose length.
- Intermittent draining or sudden large leaks caused by longitudinal splits or crushed sections.
Leaks moast frequently originate at mechanical connections-hose-to-pump, hose-to-air-gap, or hose-to-sink trap-where clamps can corrode, loosen, or be installed on damaged hose ends; small hairline cracks along the hose wall produce slow persistent drips while longitudinal tears produce rapid loss and pooling. Flow restrictions result from internal occlusion by food particles, grease buildup, or kinking where the tube is routed; these restrictions increase backpressure on the pump, can extend cycle time, trigger drain faults, and raise motor temperature. For repair, inspect the entire run for softening, hardening, or deformation, verify clamp torque and routing above the trap waterline to prevent siphoning, and replace with the correct WD24X10062 specification hose to restore designed flow and sealing performance.
| Item | Description |
|---|---|
| Inner diameter | matches OEM spec to maintain pump flow rate and prevent backpressure |
| Material | flexible thermoplastic or rubber compatible with dishwasher detergents and hot water |
| Common failure mode | Clamps loose, kinks, internal clogging, or longitudinal cracking at stress points |
Replacement Considerations, Compatibility, and Step‑by‑Step Installation Procedures for the Drain Tube Assembly
The WD24X10062 GE Dishwasher Drain Tube Assembly functions as the wastewater conveyance between the dishwasher pump outlet and the household drain, air gap, or garbage disposal.This flexible tube must maintain an unobstructed internal bore, appropriate axial stiffness to resist collapse under pump pressure, and a secure connection at both the pump spud and the disposal/air-gap fitting; typical failure modes include cracks at molded ends, clamp slippage, kinking, and debris-induced restrictions. Verify compatibility by matching the OEM part number, the connector style at the pump (barbed spud, push-fit, or molded elbow), and the effective inner diameter and length to the original hose routing; for example, replacing a collapsed tube requires choosing a replacement that allows the same bend radius and reaches the same connection points without stretching or compressing the hose routing.
- Power and access: disconnect power at the breaker and pull the appliance forward to access the rear; shut off water if necessary to move the unit safely.
- Remove old hose: loosen clamps at the pump outlet and disposal/air-gap,then detach the tube-inspect fittings for damage or residual gasket material.
- Install new tube: route the WD24X10062 so it follows the original path, push fully onto the pump spud and the disposal/air-gap fitting, and secure with appropriately sized stainless-steel worm-gear clamps or OEM-style crimp clamps.
- Secure and test: re-seat the dishwasher, restore power, run a short drain cycle, and inspect all joints for leaks and proper flow; adjust clamps or routing if siphoning or standing water is observed.
During installation, avoid sharp bends and contact with heated surfaces; maintain a rising loop to an air gap or the underside of the countertop as required to prevent backflow and siphoning. Use clamps sized to the tube’s outer diameter and tighten until snug-excessive torque can deform the barb or split the molded end-while clip-mounting the hose to the chassis to prevent vibration-induced wear. A simple reference for common attributes can help during selection and verification:
| Item | Description |
|---|---|
| Material | Flexible heat-rated hose (EPDM/PVC blend typical) suitable for hot wastewater and detergents |
| Common failure modes | Cracked molded ends, clamp slippage, internal debris build-up, kinking |
| Connector types | Barbed pump spud, molded elbow, or push-fit to disposal/air-gap-confirm before ordering |
| Installation tip | Maintain smooth bends, secure with stainless-steel clamps, and perform a full drain test to confirm sealing and flow |
Q&A
What is the WD24X10062 and which GE dishwashers does it fit?
WD24X10062 is the OEM drain tube (drain hose) assembly used on a range of GE built-in dishwashers.It fits many GE/Hotpoint/Whirlpool-built models but not every GE dishwasher-always confirm fit by matching your appliance model number (usually on the inner door frame) to the parts lookup or the replacement part listing before ordering.
what are the common symptoms that indicate the drain tube needs replacement?
Typical symptoms include water remaining in the tub after a drain cycle, visible leaks under the dishwasher, a wet or musty smell from the dishwasher area, gurgling noises during drain, or visible cracks/kinks in the hose. Clogs can also mimic hose failure,so inspect and clear blockages before assuming the hose itself is bad.
How do I inspect the drain tube to tell if it’s clogged or damaged?
Turn off power to the dishwasher and remove the lower kickplate/access panel. Visually inspect the hose for cracks, holes, or collapsed sections. To check for clogs, disconnect the hose at the dishwasher pump outlet (have a bucket/towels ready) and try to flush water through it; if flow is restricted, the hose is clogged or collapsed. Also inspect connections and clamps for leaks.
What tools and materials are needed to replace the WD24X10062?
Basic tools include a screwdriver (Phillips or flat depending on clamps/screws), pliers or nut driver for hose clamps, a bucket or towels, and possibly a socket set for removing the kickplate or mounting screws. Replacement hose clamps (worm-gear type) are recommended if the old clamps are worn. Gloves and safety glasses are also advised.
What are the general steps to replace the drain tube assembly safely?
1. Disconnect power to the dishwasher (turn off breaker) and shut off water if needed. 2. Remove the lower access panel and tilt or pull the dishwasher out if necessary. 3.Place a bucket/towels under the pump outlet, loosen and remove the clamps, and disconnect the old hose from the pump and the disposer/sink drain/air gap. 4. Remove the old hose and install the new WD24X10062 in the same routing and orientation. 5. Secure all connections with proper clamps, create/maintain a high loop or connect to the air gap per local code, and reattach any mounting brackets. 6. Restore power and run a short cycle to check for leaks and proper draining.
Do I need an air gap or a high loop when installing the drain tube?
Yes. Local plumbing codes generally require either an air gap or a high loop to prevent wastewater backflow into the dishwasher. A high loop is formed by securing the drain hose as high as possible under the countertop before it connects to the garbage disposal or sink drain; an air gap is a separate device mounted at the sink that provides a visible physical break. Use whichever your local code requires or the original installation had.
Are there any installation pitfalls or common mistakes to avoid?
Common mistakes include routing the hose without a proper high loop or air gap (causes backflow), overtightening clamps (can pinch or deform the hose), failing to fully seat the hose on the pump or disposal spud, reusing old brittle clamps, and not checking the garbage disposal knockout plug (if the dishwasher was newly connected to a disposer). Also avoid kinking the hose or trapping it behind sharp edges.
Will replacing the drain tube fix all dishwasher drain problems?
No. A faulty drain tube will explain leaks and some drain failures, but other causes include a clogged filter or sump, failed drain pump, blocked garbage disposal or sink trap, a faulty check valve (if present elsewhere), or electronic/control issues. If replacing the hose doesn’t restore proper draining, further diagnosis of the pump, filters, and drain path is required.
In Summary
The WD24X10062 GE dishwasher drain tube assembly plays a critical role in ensuring effective wastewater removal,preventing backflow,and maintaining the overall performance and hygiene of the appliance. As a dedicated conduit between the dishwasher tub and drain system,this component helps protect pumps and internal seals from excessive moisture exposure and debris,contributing to reliable wash cycles and minimizing the risk of leaks or odor advancement when properly functioning and fitted to the correct model.
Accurate diagnosis and timely replacement of the WD24X10062 assembly are essential when symptoms such as slow draining, leaks, unusual smells, or visible damage appear. Verifying compatibility, inspecting for clogs, cracks, or kinks, and addressing issues promptly-ideally using original or equivalent quality replacement parts and following manufacturer guidance-can prevent secondary damage, restore performance, and extend the service life of the dishwasher. When in doubt, consultation with a qualified technician ensures safe and effective resolution.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok