240495804 Frigidaire Refrigerator Door Bin Replacement is a molded interior door storage bin designed to replace the OEM door shelf in compatible Frigidaire refrigerators. The component is a non-electrical, injection-molded thermoplastic assembly that typically includes molded mounting bosses or clips, a front retention lip and a drip-resistant profile; it serves as a removable storage pocket mounted to the inner door liner.
Inside the appliance the door bin interfaces mechanically wiht the inner door panel, retaining clips or rails, and adjacent door components such as the gasket and hinge area. While the bin does not participate in the refrigeration or electrical subsystems, its correct fit and mounting affect door closure, seal integrity and load distribution on the door hinges; a broken or improperly installed bin can allow stored items to interfere with the door seal or prevent the door from closing fully, which in turn may increase energy draw or temperature instability in the cabinet.
In this article readers will find a technical overview of the 240495804 bin’s functional design and were it is indeed typically used on the refrigerator door, guidance on verifying compatibility with specific models, common failure symptoms (cracked plastic, broken mounting tabs, looseness, or deformation), step‑by‑step troubleshooting checks to confirm whether the bin or its mounts have failed, and practical replacement considerations such as measuring critical dimensions, confirming mounting orientation, selecting the correct OEM part, and basic installation tips to restore proper fit and avoid load or clearance issues.
Table of Contents
- Function and Mechanical Role of the Refrigerator Door Bin in Frigidaire Systems
- How the 240495804 Frigidaire Refrigerator Door Bin Replacement integrates and Operates Within the Door Assembly
- Common Failure Modes and Diagnostic Symptoms of door Bin Damage or Deformation
- Model Compatibility, Installation Considerations and Troubleshooting Diagnostics for 240495804 Door Bin Replacement
- Q&A
- Concluding Remarks
Function and Mechanical Role of the Refrigerator Door Bin in Frigidaire Systems
the refrigerator door bin functions as a structural and organizational component that provides repeated load-bearing and retention for consumables; a correct fit is necessary, which is the purpose of the 240495804 Frigidaire Refrigerator Door Bin Replacement part. Mechanically,the bin transfers applied loads (bottles,jars,cartons) into the refrigerator door liner via molded mounting tabs or clips and must accommodate leverage forces from tall items without overstressing those tabs. Typical materials are glass-reinforced or general-purpose thermoplastics (ABS, polypropylene) chosen for low-temperature impact resistance and minimal creep; fatigue and brittle fracture at the mounting points are the most common failure modes after years of cyclic loading or impact from heavy items.
Functionally the bin also controls item movement and airflow on the door face: the front lip and divider ribs limit item tipping, while the bin depth and spacing determine clearances for door shelves and gasket sealing. For compatibility during replacement, verify tab spacing, clip geometry, wall thickness, and bin projection so the replacement engages existing slots and does not interfere with door gasket closure. Practical technician checks include measuring tab pitch against the door liner, inspecting for deformed slots or worn clips that can cause a loose fit, and testing the snap-fit engagement under a representative load (e.g., a full bottle) to confirm secure retention.
- Load transfer: transmits vertical and lateral loads to door liner via mounting tabs.
- Containment: front lips and ribs prevent tipping and control item movement.
- Compatibility: must match tab spacing, clip style, and bin projection to avoid interference with gasket closure.
- Durability factors: material impact resistance, wall thickness, and stress concentration at tabs determine service life.
| Item | Description |
|---|---|
| Part | 240495804 Frigidaire Refrigerator Door Bin Replacement – snap-in door bin for compatible Frigidaire liners |
| Material | manufacturer-specified thermoplastic (commonly ABS/polypropylene) with cold-impact considerations |
| Mounting | Molded mounting tabs/clip profile; verify tab pitch and engagement style |
| Common failure | Cracked or sheared mounting tabs due to overload, impact, or material embrittlement |
How the 240495804 Frigidaire Refrigerator Door Bin Replacement Integrates and Operates Within the Door Assembly
The 240495804 Frigidaire Refrigerator Door Bin Replacement functions as a modular storage shelf that integrates directly into the inner door liner via molded mounting hooks and alignment tabs. It bears the lateral and vertical loads of stored items, so its geometry and clip locations are designed to distribute stress into the door liner rather than a single point; for example, large condiment bottles sit with their weight transferred to the bin ledge and the adjacent clip hooks. Proper seating of the bin is necessary to maintain full door closure clearance and to avoid compressing the door gasket or interfering with adjacent shelves and controls.
Mechanically, the bin engages by snap-fit retention and often requires a defined sequence-lift slightly, disengage retaining tabs, then pull free-when removing for cleaning or replacement; installation is the reverse, ensuring each clip clicks into its matching pocket. Compatibility is resolute by the door liner’s pocket spacing and clip geometry, so technicians typically confirm part fitment against the door model and inspect for cracked clips or plastic creep before reuse. Routine checks include verifying that the bin is flush with the liner, that no cracked hooks allow lateral movement, and that loaded bottles do not tilt into the door seal during closing.
- mounting: Snap-fit clips and alignment tabs into the inner door liner.
- Behavior under load: Distributes weight across multiple clips; avoid concentrated loads at a single edge.
- Compatibility check: Match clip spacing and pocket shape to door liner geometry.
- Service tip: Inspect clips for brittle failure and ensure gasket clearance after installation.
| Item | Description |
|---|---|
| Mounting method | Snap-fit hooks and alignment tabs that engage molded pockets in the door liner |
| Material | Injection-molded thermoplastic selected for low-temperature toughness and dimensional stability |
| Common issues | Cracked or worn clips, plastic creep under sustained load, and interference with door gasket or adjacent shelves |
Common Failure Modes and Diagnostic Symptoms of Door Bin Damage or Deformation
the refrigerator door bin is a molded tray that transfers door-mounted load into discrete mounting bosses and retention clips; it carries bottles, jars, and other packaged goods and must maintain dimensional stability to avoid interference with door seals and closing. The 240495804 Frigidaire Refrigerator Door Bin Replacement is designed to replicate the original mounting geometry and wall thickness so that replacement restores correct load path and clearances. Typical materials are engineered thermoplastics (ABS or PC blends) that resist creep under static load but can fail at localized stress concentrators such as screw bosses, tab roots, or the lower lip where repeated impacts occur.
- Visible cracks radiating from mounting tabs or screw bosses.
- Permanent sag or deformation of the bin lip causing items to slide out.
- Bin disengages from door with light upward pressure (broken/abraded retention tabs).
- Interference with door gasket or uneven door closing after loading.
- Hairline stress fractures detectable with flex or by using directional light.
| Item | Description |
|---|---|
| Primary failure points | Mounting tabs, retention clips, lower lip and screw bosses-inspect for notches, cracks or material thinning. |
Diagnosing a damaged door bin requires both visual inspection and simple mechanical checks: apply a known load (for example, a 2-4 kg bottle) near the suspected failure point to reproduce sag or disengagement, inspect tabs for rounded edges or missing material, and use a flashlight to reveal hairline cracks at tab roots. Compatibility checks prior to replacing the bin should confirm that the replacement matches the door cavity depth,tab spacing,and boss diameter so the bin seats flush and transfers load correctly; mismatched geometry can produce the same symptoms as a cracked bin even when the new part is undamaged.Practical repair decisions hinge on whether the damage is limited to a replaceable clip or affects the molded tray geometry-minor tab failures can sometimes be restored with reinforced clips, while deformed trays that alter door clearance require full replacement.
Model Compatibility, Installation Considerations and Troubleshooting Diagnostics for 240495804 Door Bin Replacement
The 240495804 Frigidaire Refrigerator Door Bin Replacement is a molded storage shelf that secures to the refrigerator door liner by engaging two or more molded mounting bosses and a front retention lip. Functionally it retains stored items and transfers vertical and lateral loads into the door liner; typical material is glass‑filled ABS to resist impact and cold embrittlement. Compatibility depends on the exact geometry of the bin-to-liner interface – boss spacing, clip profile, and overall bin width – rather than just the refrigerator model name.Replacing the part requires matching the mounting tab pitch and orientation as bins with identical outer dimensions can use different clip designs that are not interchangeable across door inner liners.
Installation should begin with a dimensional check: measure the center-to-center distance between the liner bosses and confirm the clip shape aligns with the replacement bin. During diagnostics, look for specific failure modes such as cracked mounting bosses, deformed clip hooks, or a broken retention lip; a practical test is to load the bin incrementally and observe whether the engagement point shifts or a crack propagates at a boss. If a liner boss is stripped, repair options include a replacement door liner or a captive-repair clip, but verify clearance for the door gasket and shelves before final installation. Common symptoms and fast diagnostic checks are listed below to guide field troubleshooting.
- Bin sags or tilts under light load - inspect mounting bosses for cracks or wear.
- Bin detaches when door is opened – check clip engagement and boss spacing alignment.
- Visible cracks at the front lip – replace bin to prevent stored items falling.
- Interference with door gasket – confirm correct bin depth and orientation before reuse.
| Item | Description |
|---|---|
| Part number | 240495804 – molded door bin compatible with specific Frigidaire liners; verify boss pitch |
| Material | Glass-filled ABS (typical) - selected for rigidity and low-temperature impact resistance |
| Mounting style | Molded clip tabs engaging door liner bosses; orientation-specific |
| Typical diagnostic | Load test and visual inspection for cracked bosses, broken hooks, or retention lip failure |
Q&A
What is part 240495804 and how do I know it’s the correct replacement for my Frigidaire refrigerator?
Part 240495804 is an OEM replacement door bin (also called a door shelf or dairy bin) made for certain Frigidaire/Electrolux refrigerators. The only reliable way to confirm compatibility is to check your refrigerator’s model number (usually on a sticker inside the cabinet or on the door frame) and look up that model on the manufacturer’s parts diagram or an authorized parts retailer. Do not rely solely on visual similarity-use the appliance model number or the OEM part lookup to confirm fit.
How do I remove the old door bin?
Most Frigidaire door bins are held in place by molded slots and tabs and can be removed without tools. Typical steps: empty the bin,lift the bin slightly to disengage the bottom tabs,tilt the bin forward and pull it straight out. If there are retention screws or a retainer bar, remove screws with a Phillips screwdriver first and keep hardware for reinstallation. If a bin is cracked or stuck, gently flex the door liner area while working the tabs free to avoid breaking the liner or bin.
How do I install part 240495804?
Installation is usually simple: align the bin’s mounting tabs with the slots on the door liner, insert the top edge into the top slots, then press the bottom edge down until the tabs snap into place. If your refrigerator uses a retainer bar or screws, reinstall that hardware after seating the bin. Make sure the bin is level and fully seated-do a gentle pull test to confirm it’s secure.
What tools do I need and how long will replacement take?
In most cases no tools are required. If your model uses screws for the retainer or bracket, you’ll need a Phillips screwdriver. Plan for 5-20 minutes for removal and replacement depending on whether you need to remove a retainer or multiple bins. Allow extra time if you must order the correct part or if the old bin is brittle/cracked and arduous to remove.
Can I use an aftermarket or universal door bin instead of the OEM 240495804?
You can use aftermarket bins if they are listed as compatible with your refrigerator model. The important factors are matching the mounting tab locations, width, depth and retainer mechanism. Universal bins may not seat correctly or could place stress on the door liner causing premature failure. For best fit and longevity, OEM part 240495804 (or a verified direct-fit replacement) is recommended.
Are there any precautions I should take during replacement to avoid damaging the fridge?
Yes. Work gently when flexing or removing frozen or brittle bins-cold plastic can crack easily. Avoid using metal prying tools that can scratch or gouge the door liner. If you must remove multiple bins or the door, support the door so it doesn’t place strain on the hinges. Also keep screws and small parts away from children and pets during the procedure.
How should I clean the replacement bin and are there cleaning products to avoid?
Clean the bin with warm water, mild dish soap and a soft cloth or sponge. Avoid abrasive pads or scouring powders that can scratch the plastic. Do not use harsh solvents such as acetone, paint thinner, or concentrated bleach solutions-these can weaken or discolor the plastic. Rinse and dry thoroughly before reinstalling.
Where can I buy genuine 240495804 and does it come with a warranty?
Genuine 240495804 can be purchased through Frigidaire/Electrolux authorized parts distributors, appliance parts websites, some appliance service centers, and online marketplaces. Warranty policies vary by seller-original equipment manufacturers and many reputable parts suppliers provide a limited warranty (often 30-90 days or longer); check the seller’s warranty and return policy before buying. Keep your receipt and your refrigerator model number in case you need to claim warranty or return the part.
Concluding Remarks
The 240495804 Frigidaire refrigerator door bin replacement plays an important role in maintaining the storage functionality and interior association of the appliance. As a component designed to hold bottles, condiments and other items securely on the door, a properly fitting and undamaged bin preserves convenience, prevents spills and helps maintain optimal use of refrigerator space. Using the correct replacement part ensures proper fit, stability and compatibility with the door’s mounting points.
Accurate diagnosis is essential before replacing a door bin: identifying whether the bin itself, its mounting clips or adjacent door components are the source of a problem avoids unnecessary expense and ensures a lasting repair. Inspecting for cracks, warping, or broken fasteners and confirming part number compatibility reduces the risk of repeat failures and supports effective troubleshooting.
When replacement is warranted, sourcing the correct 240495804 part and following recommended installation procedures restores functionality and can extend the useful life of the refrigerator. whether a competent DIYer or a service technician performs the work, a careful, measured approach to diagnosis and installation delivers the best outcome in terms of safety, performance and long-term value.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok