WB28K10190 GE Oven Left Front Orifice is a calibrated gas jet intended for the left front burner position in compatible GE gas ranges and ovens. The component is a small, precision-machined orifice-typically a brass orifice insert-that meters the volume of gas delivered to the burner head and establishes the baseline fuel flow rate for that specific burner port.
Inside the appliance the orifice sits between the range’s manifold/valve assembly and the burner tube, and it directly influences the air-fuel ratio, flame pattern, and heat output for the left front cooking zone. It interacts functionally with the gas valve (and its safety devices), the regulator/manifold pressure, the burner head and mixing tube, and the ignition system; improper orifice sizing, blockage, or damage can cause weak or unstable flames, sooting, or poor ignition and will also affect combustion efficiency and safety margins.
In this article you will find a technical description of the WB28K10190 orifice’s function and placement, guidance on checking compatibility with appliance models and gas type (natural gas vs. LP), common failure symptoms to recognize, step‑by‑step troubleshooting checks (visual inspection, cleaning, verifying manifold pressure and ignition sequence), and practical replacement considerations such as selecting the correct orifice size, installation best practices, and post‑installation leak and performance testing.The facts is presented to help technicians, engineers, and owners diagnose orifice‑related issues and make informed repair or replacement decisions while observing appropriate safety procedures.
Table of Contents
- Function and role of the Left Front Orifice in Oven Gas Regulation and Burner Stability
- How the WB28K10190 GE oven Left Front Orifice Operates Within the burner Assembly and Gas Delivery System
- Common Failure Symptoms and Diagnostic Indicators associated with a Faulty left Front Orifice
- Compatibility and OEM Model Fitment for the WB28K10190 GE Oven Left Front orifice
- Replacement considerations: Sizing, Torque, and Safe Installation Procedures for the Left Front Orifice
- Troubleshooting and Diagnostics: Measurement, Leak Testing, and Calibration Steps for the Orifice
- Q&A
- Wrapping Up
Function and Role of the Left Front Orifice in Oven Gas Regulation and Burner Stability
The WB28K10190 GE Oven Left Front Orifice is a precision metering orifice that controls the gas flow to the left front burner by providing a fixed orifice diameter at the valve outlet. Its bore size and seating geometry directly determine the mass flow rate for a given manifold pressure,so the part selection must match the oven’s design BTU rating and the fuel type (natural gas vs. LP).In practice, using the correct OEM orifice preserves the expected burner primary air mixture and flame envelope; substituting an incorrect size can reduce flame stability, change heat distribution on the cooktop, and upset the oven’s overall calibration even if the regulator and valve are otherwise functioning normally.
Gas delivery at the orifice interacts with manifold pressure and the valve orifice, so technicians should evaluate the entire gas train when diagnosing irregular flame behavior. Typical diagnostic observations for an incorrect orifice include small, unstable flames; yellow tipping or sooting (indicative of rich mixture); or very noisy, lifting flames (indicative of excessive flow or insufficient primary air). Common practical checks include verifying manifold pressure with a gauge, inspecting the orifice for debris or wear, and confirming that the replacement part matches the appliance specification rather than attempting to drill or modify the orifice.
- Verify fuel type and orifice code before replacement.
- Measure manifold pressure and observe flame pattern under normal operating conditions.
- Replace clogged or damaged orifices rather than altering bore size in the field.
| Item | Description |
|---|---|
| Orifice function | Fixed bore that meters gas flow to the burner, sets calibrated BTU delivery |
| Compatibility | Match to appliance model and fuel type; thread/seat geometry must be identical |
| Common symptom | Yellow flame, sooting, low heat, or noisy lifting flame |
how the WB28K10190 GE Oven Left Front Orifice Operates Within the burner Assembly and Gas Delivery System
WB28K10190 GE Oven Left Front Orifice is a small, precision-machined fitting seated in the left-front burner port that meters gas flow from the oven manifold into the burner tube.Functionally it produces the calibrated pressure drop required for the burner head to form a stable, properly sized flame given the oven’s regulator and gas valve settings. The orifice works as part of the gas delivery path: gas travels from the regulator and valve,through the manifold,then through the orifice aperture into the burner where mixing with air occurs at the burner ports.changes in supply pressure, partial blockage, or using an orifice sized for a different gas (natural vs. LP) directly alters flame height, color, and combustion efficiency at that specific cooking location.
Technicians should treat the WB28K10190 as a matched component: the correct aperture and seating geometry ensure predictable flow for diagnostics and conversions.Common service observations that point to orifice issues include reduced flame size at the left-front burner, orange/yellow flame tips, or intermittent ignition; these symptoms also occur with valve or regulator faults, so testing supply pressure and isolating the orifice is part of standard troubleshooting. For maintenance and replacement, confirm gas type compatibility and part fit, inspect and clean the orifice seat and surrounding burner assembly, and avoid deforming the aperture during removal or installation. Practical steps and features to consider:
- Function: meters gas to achieve designed flame characteristics at the left-front burner.
- Compatibility: matched to oven model and gas type; replace with identical aperture or OEM equivalent.
- Symptoms of failure: weak flame,yellow tipping,sooting,or uneven heating at that burner position.
- Service practice: check manifold pressure, remove debris, seat carefully, and verify combustion after replacement.
| Item | Description |
|---|---|
| Location | Left-front burner port, installed between manifold/valve and burner tube |
| Material | Typically brass or plated brass for dimensional stability and corrosion resistance |
| Function | Calibrated aperture to control gas flow and flame characteristics |
| Compatibility | Specified for gas type (Natural or LP) and oven model; verify OEM part number before replacement |
Common Failure Symptoms and diagnostic Indicators Associated with a faulty Left Front Orifice
The WB28K10190 GE Oven Left Front Orifice is a precision gas metering component that governs the flow rate to the left-front burner; its port diameter and thread fit are matched to the oven’s pressure and burner geometry. When the orifice is obstructed, eroded, or the wrong size for the appliance, the burner receives an incorrect volume of gas which alters combustion characteristics and the oven’s thermal balance. Compatibility matters: substituting an orifice with a different port size or thread can produce under‑firing (long cook times and reduced peak temperature) or over‑firing (excessive flame, soot, or safety valve cycling), so technicians should verify part numbers and pressure specifications before replacement.
- Low or uneven heat output: One section of the oven or the left-front surface burner will be consistently cooler compared to other zones,producing longer bake times or cold spots.
- Abnormal flame appearance: Short, weak, yellow, or lifting flames indicate restricted flow or improper air/gas mixture; a blue steady flame indicates proper metering.
- Delayed ignition or popping sounds: A partially blocked orifice can cause gas to accumulate briefly before ignition, producing audible pops or repeated clicking of the ignition system.
- Soot, carbon deposits, or gas odor: Visible sooting or persistent smell of gas signals incomplete combustion or leakage near the orifice/burner connection.
Diagnostic checks include visually inspecting and cleaning the orifice and burner ports,comparing performance to another known-good orifice by temporary swap,and measuring inlet pressure with a manometer to confirm system pressure is within spec. Practical examples: if swapping the suspect orifice to a different burner transfers the symptom, the orifice is the likely fault; if the symptom stays with the left-front position, investigate the supply tube, valve, and regulator. Record flame shape, burner-to-burner temperature differentials, and any soot patterns to determine whether replacement with a WB28K10190 orifice or system-level repairs are required.
Compatibility and OEM Model Fitment for the WB28K10190 GE Oven Left Front Orifice
The WB28K10190 GE Oven Left Front orifice is a precision-machined gas jet that meters fuel to the left-front burner of compatible GE oven/cooktop assemblies. Its internal orifice diameter and thread/seat geometry determine the delivered BTU at a given manifold pressure; therefore the correct part must match the appliance’s gas type (natural or LP) and burner design. Technicians identify fitment by comparing the OEM part number, the physical seat (frequently enough a spud or threaded insert in the burner head), and any stamping on the existing orifice. Replacing an orifice with one that has the wrong bore, thread, or seating profile will change flame shape and heat output and can cause incomplete combustion or a weak burner flame.
- Verify the appliance model/serial and OEM part number before ordering or replacing the orifice.
- Confirm gas type: manny ranges use a different orifice size for LP conversion versus factory natural gas.
- Inspect the burner head and retaining hardware to ensure the orifice threads and seat are compatible with the replacement.
- After replacement, perform a static pressure check and observe flame characteristics across low and high settings.
Compatibility is primarily persistent by mechanical fit and intended flow rate rather than the appliance series name alone; some GE ranges share burner modules across multiple model families, so cross-referencing parts lists is necessary. For practical installation, remove the burner cap and head assembly, compare the external dimensions and any wrench flats, then hand-start the orifice into the seat to confirm thread engagement before torqueing. If a technician encounters a rebuilt orifice or an unmarked part, bench-testing against a known-good burner assembly or consulting the service manual will avoid trial-and-error replacements.
| Item | Description |
|---|---|
| OEM Part | WB28K10190 – left front burner orifice designation |
| Function | Controls gas flow rate (BTU) and flame characteristics for left-front burner |
| Compatibility checks | Verify model/serial,gas type (NG/LP),thread/seat geometry,and orifice bore marking |
Replacement Considerations: Sizing,Torque,and Safe Installation Procedures for the Left Front Orifice
The WB28K10190 GE Oven left Front Orifice is a precision fuel-metering component that defines the volume of gas delivered to the left front burner by constraining the passage diameter. Orifice size (orifice ID) and the burner port geometry together determine flame shape, heat output, and combustion stability at a given manifold pressure. Replacing this orifice with one of the wrong flow rating or incompatible thread form will change mixture characteristics: an oversized orifice can produce an over-rich, yellow, sooty flame and can trigger safety shutoffs, while an undersized orifice can cause weak flames and slow heat rise. match the WB28K10190 part to the oven model and the specified manifold pressure, and verify that the replacement has the correct seating face and thread type to avoid leaks or misalignment with the burner head.
Safe installation requires controlled torque,clean mating surfaces,and a post-installation leak and combustion check. Follow the appliance manufacturer’s torque specification if available; if not, seat the orifice by hand then use a calibrated wrench to snug without deforming the seat, and perform a gas-leak test at the connection after pressurizing the system. Observe flame color and stability at operating pressure and confirm no burner popping or intermittent extinguishment. Practical steps for a service technician include isolating gas and electrical power, removing the burner assembly if necessary to access the orifice, and performing a soap/leak solution check and a flue/venting inspection after reassembly.
- Safety first: shut off gas and power, ventilate area, and use an appropriate wrench sized for the orifice.
- Fit check: verify thread form and seating face, and clean debris from the burner passage before installation.
- Testing: leak-check joints, run appliance to operating pressure, and inspect flame pattern and exhaust for proper combustion.
| Item | description |
|---|---|
| Function | Controls gas flow to the left front burner by fixed orifice diameter. |
| Compatibility | Must match OEM part number, thread form, and manifold pressure rating. |
| Torque guidance | Use manufacturer torque spec or seat by hand then snug with calibrated tool; avoid over-torquing. |
| Verification | Perform leak test and observe flame quality at operating pressure. |
Troubleshooting and Diagnostics: Measurement, Leak Testing, and Calibration Steps for the Orifice
The WB28K10190 GE Oven Left Front Orifice is a precision-matched metering port that governs gas flow to the left-front burner and thus directly affects flame shape, heat output, and safe combustion. Technicians should inspect the orifice for bore wear, carbon deposits, or mechanical distortion and verify compatibility with the appliance model and gas type before diagnosing flame problems. Measure the internal diameter with a pin gauge set, small telescoping bore gauge, or a calibrated optical tool and compare the result to the OEM specification; even small reductions in bore area can reduce flow considerably. For leak testing, isolate the appliance and use a combination of an electronic combustible gas detector and a soapy-water test at the orifice threads and manifold connections to detect seepage; always shut off the gas supply and vent the area before disassembly.
- document symptoms (low flame, yellow tipping, noisy combustion) and record manifold pressure with a manometer at idle and during ignition.
- Remove the orifice and inspect under magnification; clean with non-abrasive tools or replace if the bore is eroded or plated with deposits that resist cleaning.
- Reinstall using the correct gasket/seating practice and check for thread leaks with a detector; tighten to service torque if specified by manufacturer literature.
- After reassembly,verify flame pattern and perform a final manifold-pressure check; if flow remains low,cross-check regulator output and upstream piping restrictions.
| Item | Description |
|---|---|
| WB28K10190 GE Oven Left Front Orifice | Metering port for left-front burner; inspect bore diameter, clean or replace to restore correct flow. |
Calibration is a system-level activity: set baseline manifold pressure, install the verified orifice, and then confirm that the burner produces a compact, primarily blue flame with a stable inner cone and minimal yellow tips under normal load. Use a calibrated manometer to adjust and confirm regulator output within the appliance’s specified pressure range, and only make regulator changes when upstream pressure and pipe sizing have been validated; otherwise, replace the orifice with the correct part number. Keep a simple record of measured bore diameter, manifold pressures, and observed flame characteristics before and after service to support repeatable diagnostics and to determine whether the issue was orifice-related, regulator-related, or due to piping/obstruction upstream.
Q&A
What is the WB28K10190 GE Oven Left Front Orifice and what does it do?
the WB28K10190 is an OEM brass gas orifice (jet) used on the left-front burner of certain GE gas ranges/ovens. It meters the gas flow to that burner so the correct amount of fuel reaches the burner ports,producing the intended flame size and heat output.
How can I tell if the left-front orifice (WB28K10190) is the problem?
Common signs of a failing or clogged orifice include a weak, yellow or sooty flame on the left-front burner, uneven heating, or the burner not lighting or staying lit. A gas smell indicates a leak or unburned gas-shut off the appliance and gas supply promptly and ventilate the area. Confirm problems by comparing the left-front burner’s flame to the other burners and inspecting the orifice for visible debris or blockage.
How do I find and identify the left-front orifice on my GE range?
Turn off the range and gas supply. Remove the grate and burner cap, then lift off the burner head (for sealed or non-sealed burners you may need to remove cooktop panels). The orifice is typically a small threaded brass fitting at the end of the burner’s gas tube or inside an orifice holder near the manifold.The OEM part number may be stamped on it, but if not, match the part to WB28K10190 using the appliance’s parts diagram or model lookup.
Is WB28K10190 compatible with my GE model?
Compatibility depends on your appliance model and year. The safest method is to check your stove/range model number (on the tag inside the oven door, drawer, or back panel) and look up parts via GE/Whirlpool parts lookup, the appliance’s service manual, or a reputable parts supplier. never assume interchangeability; orifices vary by thread, seat style and flow rate.
Can I replace the WB28K10190 myself, and what are the steps?
Yes, a competent DIYer can replace it, but follow safety precautions. Steps: 1) Turn off the gas supply and unplug or disconnect power. 2) Remove grate, burner cap and burner head. 3) Note or photograph orientation, then unscrew the old orifice with the correct wrench/socket. 4) Install the new WB28K10190 by hand-starting threads, then snug-do not overtighten. 5) Reassemble, restore gas and power, and test for proper flame and leaks (soapy water test at connections). if you are not pleasant working on gas appliances, hire a qualified technician.
What tools do I need to replace or inspect the orifice?
Typical tools: adjustable or open-end wrench or the correct socket for the orifice, screwdrivers (to remove burner/cooktop panels), needle-nose pliers, flashlight, soft brush or canned air for cleaning, and a mild soap solution for leak checking. Use personal protective equipment and avoid using hard probes that can damage the orifice hole.
How should I clean a clogged orifice and can I drill it out?
To clean, remove the orifice and blow it out with compressed air or use a soft-bristled brush; avoid using wire, needles, or drill bits that can enlarge or distort the metering hole and change gas flow. If the orifice remains clogged or damaged, replace it-do not attempt to re-drill to “fix” flow, as that can create unsafe gas pressures and improper combustion.
If I replace the orifice and the burner still behaves incorrectly, what else should I check?
Check the burner head ports for debris or corrosion, ensure the air shutter/mixture adjustment is correct, verify manifold gas pressure and the range’s regulator, inspect burner valve operation, and confirm you installed the correct orifice size for your local gas type (natural gas vs LP). Persistent problems or suspected gas-pressure/regulator issues should be handled by a licensed appliance technician or gas service professional.
Wrapping Up
The WB28K10190 GE Oven Left Front Orifice is a precision component that regulates the flow of gas to the left front burner, directly influencing flame characteristics, heat output, and overall cooking performance for that burner. As part of the oven’s fuel delivery system, the orifice helps ensure consistent combustion, efficient operation and appropriate temperature control, making it an critically important element in both performance and appliance safety.
Because symptoms of a failing orifice-such as irregular or weak flames, uneven heating, or discolored flame-can also arise from other gas or ignition-related issues, accurate diagnosis is essential. Replacing the WB28K10190 only when a proper assessment confirms it is the faulty component helps avoid unnecessary parts changes and ensures the underlying cause is addressed. For gas appliances, professional evaluation and installation by a qualified technician are recommended to verify fitment, confirm correct gas pressure, perform leak checks, and restore safe, reliable operation.
Maintaining the correct orifice and following appropriate diagnostic and replacement practices preserves oven efficiency, cooking consistency and safety. Thoughtful, informed service-using the correct OEM part and appropriate professional procedures-supports long-term performance and reduces the risk of recurrent problems.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok